Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

The effect of price-based demand response on carbon emissions in European electricity markets: The importance of adequate carbon prices

Price-based demand response (PBDR) has recently been attributed great economic but also environmental potential. However, the determination of its short-term effects on carbon emissions requires the knowledge of marginal emission factors (MEFs), which compared to grid mix emission factors (XEFs), are cumbersome to calculate due to the complex characteristics of national electricity markets. This study, therefore, proposes two merit order-based methods to approximate hourly MEFs and applies them to readily available datasets from 20 European countries for the years 2017–2019. Based on the calculated electricity prices, standardized daily load shifts were simulated which indicated that carbon emissions increased for 8 of the 20 countries and by 2.1% on average. Thus, under specific circumstances, PBDR leads to carbon emissions increases, mainly due to the economic advantage fuel sources such as lignite and coal have in the merit order. MEF-based load shifts reduced the mean resulting carbon emissions by 35%, albeit with 56% lower monetary cost savings compared to price-based load shifts. Finally, by repeating the load shift simulations for different carbon price levels, the impact of the carbon price on the resulting carbon emissions was analyzed. The Spearman correlation coefficient between carbon intensity and marginal cost along the German merit order substantially increased with increasing carbon price. The coefficients were -0.13 for the 2019 carbon price of 24.9 €/t, 0 for 42.6 €/t, and 0.4 for 100.0 €/t. Therefore, with adequate carbon prices, PBDR can be an effective tool for both economical and environmental improvement.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Simulation of aerosol direct radiative forcing with RAMS-CMAQ in East Asia

The air quality modeling system RAMS-CMAQ is developed to assess aerosol direct radiative forcing by linking simulated meteorological parameters and aerosol mass concentration with the aerosol optical properties/radiative transfer module in this study. The module is capable of accounting for important factors that affect aerosol optical properties and radiative effect, such as incident wave length, aerosol size distribution, water uptake, and internal mixture. Subsequently, the modeling system is applied to simulate the temporal and spatial variations in mass burden, optical properties, and direct radiative forcing of diverse aerosols, including sulfate, nitrate, ammonium, black carbon, organic carbon, dust, and sea salt over East Asia throughout 2005. Model performance is fully evaluated using various observational data, including satellite monitoring of MODIS and surface measurements of EANET (Acid Deposition Monitoring Network), AERONET (Aerosol Robotic Network), and CSHNET (Chinese Sun Hazemeter Network). The correlation coefficients of the comparisons of daily average mass concentrations of sulfate, PM2.5, and PM10 between simulations and EANET measurements are 0.70, 0.61, and 0.64, respectively. It is also determined that the modeled aerosol optical depth (AOD) is in congruence with the observed results from the AERONET, the CSHNET, and the MODIS. The model results suggest that the high AOD values ranging from 0.8 to 1.2 are mainly distributed over the Sichuan Basin as well as over central and southeastern China, in East Asia. The aerosol direct radiative forcing patterns generally followed the AOD patterns. The strongest forcing effect ranging from -12 to -8 W m-2 was mainly distributed over the Sichuan Basin and the eastern China's coastal regions in the all-sky case at TOA, and the forcing effect ranging from -8 to -4 W m-2 could be found over entire eastern China, Korea, Japan, East China Sea, and the sea areas of Japan

54 ENVIRONMENTAL SCIENCES↗

Impacts of control strategies, the Great Recession and weekday variations on NO 2 columns above North American cities

The Ozone Monitoring Instrument (OMI) has been estimating NO2 columns from space for over 10 years, and these have been used to estimate emissions and emission trends for point and area sources all over the world. In this study we evaluate the trends in NO2 columns over 54 cities in the USA and Canada to identify the long term trends due to air quality policies, the impact of the Great Recession, and the weekday-weekend effect. A multiple linear regression model is used to fit annual, seasonal and weekly factors for individual swath retrievals along with the impact of temperature, wind speed and pixel size. For most cities, the correlation coefficients of the model fit ranges from 0.47 to 0.76. There have been strong reductions in NO2 columns, with annual decreases of up to 7% per year in most cities. During the years of the Great Recession, NO2 columns were as much as 30% lower than they would have been had they followed the linear annual trend. The analysis yielded insights into the timing of the reductions, with some cities in the northwest and in the east experiencing reductions in 2008 already, and most areas back to where they would have been based on the uniform trend by 2011. The analysis also finds that reductions in columns during the weekend vary significantly from city to city, with a range in reductions of 10%-30% on Saturdays, and 20%-50% on Sundays.

de Foy, Benjamin (ORCID:0000000341509922)↗

Evaluation of CMIP6 models in simulating the statistics of extreme precipitation over Eastern Africa

We report the Eastern Africa region experiences frequent extreme precipitation events that can cause destruction of property and environment, and loss of lives. Thus, there is a need to understand how these events may change in the future and how well the global climate models that are used to make projections can simulate precipitation extremes in this region before they can be used in downscaling or flood and drought impact assessment studies. In this work, we evaluated the ability of sixteen Coupled Model Intercomparison Project Phase 6 (CMIP6) models to simulate present-day precipitation extremes over the Eastern Africa region during the two rainy seasons (March–May and September–November). We used nine extreme precipitation indices (including seven (one) indices of wet (dry) extremes) defined by the Expert Team on Climate Change Detection and Indices. The CMIP6 models were evaluated against two gridded observation datasets: Global Precipitation Climatology Project One-Degree Daily Dataset and Tropical Rainfall Measuring Mission Multi-satellite Precipitation Analysis 3B42. Three model performance metrics (percentage bias, normalized root-mean-square error, and pattern correlation coefficient) were employed to further assess the strengths and weakness of the models. Our results show that the multi-model ensemble mean generally provides a better representation of observed precipitation and related extremes compared to individual models when considering all metrics and seasons. Several consistent biases are evident across CMIP6 models, which tend to overestimate the total-wet day precipitation and consecutive wet days, and underestimate very wet days and maximum 5-day precipitation in both seasons. Furthermore, no single model consistently performs best, model performance varies with the season and index under consideration and is generally independent of horizontal resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exosomal proteome analysis of human plasma to monitor sepsis progression

Highlights: • As low as 300 μL human plasma is sufficient for exosome isolation using our one-step density gradient ultracentrifugation. • Protein profiling of septic plasma exosomes are closely related to immune responses. • SPTLC3 may play important roles in development of sepsis. Exosomes are cell-derived vesicles containing RNA, lipid, and protein, which act in body immune response, intercellular signaling and some other important biological processes. Exosomes have been extensively studied in the past several years on their disease related mechanisms and potential roles to monitor disease progression as biomarkers. Compared with analyzing exosome RNA, comprehensive proteome profiling of exosomes in clinical samples (e.g. blood) are highly demanded but limited mainly due to lack of a reproducible method for efficient exosome extraction. In this study, we evaluated and optimized an exosome preparation approach using one-step ultracentrifugation through an Optiprep™ cushion. Exosomes prepared via this method and analyzed by mass spectrometry using Q-Exactive plus, has led to reproducible identification and quantification of 200 + proteins from human plasma samples of as little as 300 μL. Therefore, such a straightforward exosome extract method has enable us to deeply profile exosome proteomes from human blood at a scale of clinical studies. As a proof of principal, we practiced this approach in analyzing the exosome proteomic profiles of blood samples collected from a sepsis patient during six time points after diagnosis. Among the 238 proteins identified and quantified across the 6 samples, protein SPTLC3 involved in the sphingolipid metabolism, shows a negative correlation (p = 0.02, correlation coefficient = −0.984) with disease progression indicated by body temperature (BD) and C-reactive protein (CRP). Therefore, SPTLC3 could be an interesting target for future study on molecular mechanism of sepsis development, as well as potential classifier to monitor clinical progression of sepsis.

60 APPLIED LIFE SCIENCES↗

Knife mill operating factors effect on switchgrass particle size distributions

Biomass particle size impacts handling, storage, conversion, and dust control systems. Switchgrass (Panicum virgatum L.) particle size distributions created by a knife mill were determined for integral classifying screen sizes from 12.7 to 50.8 mm, operating speeds from 250 to 500 rpm, and mass input rates from 2 to 11 kg/min. Particle distributions were classified with standardized sieves for forage analysis that included horizontal sieving motion with machined-aluminum sieves of thickness proportional to sieve opening dimensions. Then, a wide range of analytical descriptors were examined to mathematically represent the range of particle sizes in the distributions. Correlation coefficient of geometric mean length with knife mill screen size, feed rate, and speed were 0.872, 0.349, and 0.037, respectively. Hence, knife mill screen size largely determined particle size of switchgrass chop. Feed rate had an unexpected influence on particle size, though to a lesser degree than screen size. The Rosin Rammler function fit the chopped switchgrass size distribution data with an R2 > 0.982. Mass relative span was greater than 1, which indicated a wide distribution of particle sizes. Uniformity coefficient was more than 4.0, which indicated a large assortment of particles and also represented a well-graded particle size distribution. Knife mill chopping of switchgrass produced strongly fine skewed mesokurtic particles with 12.7 25.4 mm screens and fine skewed mesokurtic particles with 50.8 mm screen. Results of this extensive analysis of particle sizes can be applied to selection of knife mill operating parameters to produce a particular size of switchgrass chop, and will serve as a guide for relations among the various analytic descriptors of biomass particle distributions.

09 BIOMASS FUELS↗

Mathematical model parameters for describing the particle size spectra of knife-milled corn stover

Particle size distributions of Corn stover (Zea mays L.) created by a knife mill were determined using integral classifying screens with sizes from 12.7 to 50.8 mm, operating at speeds from 250 to 500 rpm, and mass input rates ranging from 1 to 9 kg min_1. Particle distributions were classified using American Society of Agricultural and Biological Engineers (ASABE) standardised sieves for forage analysis that incorporated a horizontal sieving motion. The sieves were made from machined-aluminium with their thickness proportional to the sieve opening dimensions. A wide range of analytical descriptors that could be used to mathematically represent the range of particle sizes in the distributions were examined. The correlation coefficients between geometric mean length and screen size, feed rate, and speed were 0.980, 0.612, and _0.027, respectively. Screen size and feed rate directly influenced particle size, whereas operating speed had a weak indirect relation with particle size. The Rosin Rammler equation fitted the chopped corn stover size distribution data with coefficient of determination (R2) > 0.978. This indicated that particle size distribution of corn stover was well-fit by the Rosin Rammler function. This can be attributed to the fact that Rosin Rammler expression was well suited to the skewed distribution of particle sizes. Skewed distributions occurred when significant quantities of particles, either finer or coarser, existed or were removed from region of the predominant size. The mass relative span was slightly greater than 1, which indicated that it was a borderline narrow to wide distribution of particle sizes. The uniformity coefficient was <4.0 for 19.0 50.8 mm screens, which indicated particles of relatively uniform size. Knife mill chopping of corn stover produced fine-skewed mesokurtic particles with 12.7 50.8 mm screens. Size-related parameters, namely, geometric mean length, Rosin Rammler size parameter, median length, effective length, and size guide number, were well predicted at R2 values of 0.981, 0.982, 0.979, 0.950 and 0.978, respectively as a function of knife mill screen size, feed rate, and speed. Results of this analysis of particle sizes could be applied to the selection of knife mill operating parameters to produce a particular size of corn stover chop, and could serve as a guide for the relationships among various analytic descriptors of biomass particle distributions.

09 BIOMASS FUELS↗

Retention of Conformational Entropy upon Calmodulin Binding to Target Peptides is Driven by Transient Salt Bridges

Calmodulin (CaM) is a highly flexible calcium-binding protein that mediates signal transduction through an ability to differentially bind to highly variable binding sequences in target proteins. To identify how binding affects CaM motions, and its relationship to conformational entropy and target peptide sequence, we have employed fully atomistic, explicit solvent molecular dynamics simulations of unbound CaM and CaM bound to five different target peptides. The calculated CaM conformational binding entropies correlate with experimentally derived conformational entropies with a correlation coefficient R2 of 0.95. Selected side-chain interactions with target peptides restrain interhelical loop motions, acting to tune the conformational entropy of the bound complex via widely distributed CaM motions. In the complex with the most conformational entropy retention (CaM in complex with the neuronal nitric oxide synthase binding sequence), Lys-148 at the C-terminus of CaM forms transient salt bridges alternating between Glu side chains in the N-domain, the central linker, and the binding target. Additional analyses of CaM structures, fluctuations, and CaM-target interactions illuminate the interplay between electrostatic, side chain, and backbone properties in the ability of CaM to recognize and discriminate against targets by tuning its conformational entropy, and suggest a need to consider conformational dynamics in optimizing binding affinities.

Environmental Molecular Sciences Laboratory↗

Scaling up carboxylic acid production from cheese whey and brewery wastewater via methane-arrested anaerobic digestion

In a circular economy, organic waste streams are valuable resources for sustainably producing chemicals and fuels. This study investigates a new methane-arrested anaerobic digestion (MAAD) process that converts high-strength cheese whey and brewery wastewater into carboxylic acids. The process was developed and optimized under various bench-scale semi-continuous (fed-batch) operating conditions (e.g., retention time, organic loading rate, pH, and feed/harvest frequency). The MAAD responses to various control-failure scenarios were also systematically investigated. The highest total acid productivity was 26g/(L liq ·d) with a substrate conversion of 0.79g COD digested /g COD fed at a hydraulic retention time (HRT) of approximately 2 d in a 14-L digester. The most stable conditions for digester operation (HRT 3 d at pH 6.0 and 40°C) were selected for process scale-up to 100gal (~380 L). Semi-continuous, pilot-scale MAAD successfully produced a total acid concentration of 40.6+/-1.1 g/L with 8.1% acetic acid, 45.1% butyric acid, and 44.5% lactic acid. The links between wastewater characteristics, operation mode, digester scale, and microbial community structure were statistically analyzed. The results show genera Sporolactobacillus and Clostridium positively correlate with butyric acid production (Pearson correlation coefficient>0.5). Moreover, four kinetic models were developed and fit to batch MAAD experimental datasets (R 2 >95%) and were successfully applied to predict the total acid production in both bench-and pilot-scale semi-continuous MAADs. In conclusion, this study shows MAAD has the potential for industrial-scale applications and is a robust platform to valorize low- or negative-value waste streams into high-value bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of aqueous bicarbonate and calcium ions on uranium biosorption by Arthrobacter G975 strain

Uranium(VI) biosorptionwas investigated using carbonate-free and carbonate amended synthetic groundwater (SGW) under conditions relevant to Ca-rich carbonate-bearing subsurface environments. SGW was amended with bicarbonate concentrations ranging between 0.5 and 5 mM and a G975 Arthrobacter oxydans strain, a soil bacterium previously isolated from Hanford Site soil. Selected treatments were amended with 5 mMof calcium to evaluate its effect on U(VI) biosorption. The study confirmed that Arthrobacter sp. G975 can effectively remove soluble U(VI) ions from aqueous solution. The Langmuir, Linear, and Freundlich isotherms were fitted to the experimental data. Based on a higher correlation coefficient, the data was better fit by the Langmuir model. The presence of calciumand bicarbonate ions in SGWaffects the sorption behavior of U(VI) due to the formation of highly soluble and stable uranyl-carbonate and calciumuranyl carbonate complexes that reduce adsorption of U(VI). Increasing aqueous bicarbonate concentrations exponentially reduced the U(VI) microbial adsorption compared to values obtained in carbonate-free solutions. The differences in U(VI) uptake generated by calcium additions in bicarbonate-free solutionswere small enough to conclude that calciumwas not a governing factor in biosorption. Results suggest that in the presence of bicarbonate and calcium, the damage to bacterial cells caused by U(VI) toxicity was reduced, yielding similar values for TOC degradation and cell density compared to U(VI)-free controls.

42 ENGINEERING↗

Fe-based ceramic nanocomposite membranes fabricated via e-spinning and vacuum filtration for Cd 2+ ions removal

Here, vacuum filtered and polymer mixed e-spinning membranes (ESPMs) made from or doped with Fe-based nanomaterials were successfully fabricated to remove Cd 2+ ions from a neutral aqueous solution. The used Fe-based nanomaterials including FeOOH precursor Nanowires (NWs), α-Fe 2 O 3 NWs and Fe 3 O 4 nanoparticles (NPs) were synthesized by elevating the hydrothermal reaction temperature from 250 °C to 500 °C or doing post-heating treatment. The adsorption results showed that vacuum filtered membranes (VFMs) overall performed a better Cd 2+ ions removal behavior than e-spinning ones. Among them, VFM made from Fe 3 O 4 NPs has the highest adsorption capacity (qt) with the adsorption amount of Cd 2+ ions reaching about 29.3 mg/g within only 2 min due to the high specific surface area of NPs. Models of pseudo-first-order, pseudo-second-order and intraparticle diffusion were used to study the kinetics of Cd 2+ ions removal process, and a high correlation coefficient (R 2 ) of 0.99 was obtained when pseudo-second-order model was used. It was measured that the equilibrium rate constant of VFM made from Fe 3 O 4 NPs has reached about 0.28 g mg –1 min –1 , much smaller than those of other membranes, which suggested a high Cd 2+ ions removal efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An a priori DNS study of the shadow-position mixing model

In this study, the modeling of mixing by molecular diffusion is a central aspect for transported probability density function (tPDF) methods. In this paper, the newly-proposed shadow position mixing model (SPMM) is examined, using a DNS database for a temporally evolving di-methyl ether slot jet flame. Two methods that invoke different levels of approximation are proposed to extract the shadow displacement (equivalent to shadow position) from the DNS database. An approach for a priori analysis of the mixing-model performance is developed. The shadow displacement is highly correlated with both mixture fraction and velocity, and the peak correlation coefficient of the shadow displacement and mixture fraction is higher than that of the shadow displacement and velocity. This suggests that the composition-space localness is reasonably well enforced by the model, with appropriate choices of model constants. The conditional diffusion of mixture fraction and major species from DNS and from SPMM are then compared, using mixing rates that are derived by matching the mixture fraction scalar dissipation rates. Good qualitative agreement is found, for the prediction of the locations of zero and maximum/minimum conditional diffusion locations for mixture fraction and individual species. Similar comparisons are performed for DNS and the IECM (interaction by exchange with the conditional mean) model. The agreement between SPMM and DNS is better than that between IECM and DNS, in terms of conditional diffusion iso-contour similarities and global normalized residual levels. It is found that a suitable value for the model constant c that controls the mixing frequency can be derived using the local normalized scalar variance, and that the model constant a controls the localness of the model. A higher-Reynolds-number test case is anticipated to be more appropriate to evaluate the mixing models, and stand-alone transported PDF simulations are required to more fully enforce localness and to assess model performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep learning approaches to semantic segmentation of fatigue cracking within cyclically loaded nickel superalloy

Improvements to synchrotron-based micro-computed tomography scanning capabilities have gifted researchers the ability to characterize 4D material thermomechanical responses more thoroughly than ever before. These advancements, however, have brought about new challenges in analyzing the resulting deluge of data. We report on a nickel-based superalloy specimen imaged 26 times in-situ during cyclic loading at Argonne National Laboratory Advanced Photon Source beamline 1ID, in order to monitor crack growth within the microstructure. Therefore, several deep learning approaches which utilize convolutional neural networks are implemented to segment crack features from reconstructed tomography scans. U-Net architecture implementations are found to be especially effective, achieving IoU = 0.995 +/- 0.004 and Matthews correlation coefficient scores of Φ = 0.826 +/- 0.085. These advancements broaden possibilities for scientists seeking to automate segmentation analyses of similar large datasets.

36 MATERIALS SCIENCE↗

From observation to replication: machine-learning-driven quantification and replication of fine-scale fish kinematics and behavior

Long-term quantification of fish behavior is essential for aquatic ecology, wildlife telemetry, and biomechanical device development. However, the observation duration required to obtain reliable behavioral and kinematic metrics remains unclear, and few tools exist to physically reproduce natural swimming motion for controlled experimentation. We address these challenges by developing a generalizable framework that models behavioral reliability (Spearman–Brown reliability index) as a function of observation duration and derives metric-specific monitoring thresholds. Using juvenile white sturgeon (Acipenser transmontanus) as a case study, we demonstrate that the minimum duration needed for reliable estimates varies substantially across kinematic features: to exceed a reliability of 0.8, total distance traveled requires 12 days, average curvature (mm?¹) 15 days, tail-beat frequency (Hz) 8 days, and average speed (body length/s) 17 days. We further bridge digital analysis and physical testing by developing a hardware-in-the-loop simulator that reconstructs machine-learning-derived swimming kinematics with high fidelity (correlation coefficient 0.98–0.99, RMSE 1.22–1.27 mm over a 5-minute segment). This platform enables realistic, repeatable motion stimuli for evaluating aquatic sensing technologies and bio-integrated devices under controlled conditions. Together, these contributions provide a scalable approach for designing long-term behavioral studies and a data-driven connection between ecological observation and robotic experimentation.

Hwang, SungJoo↗

Web tools concerning performance analysis and planning support for solar energy plants starting from remotely sensed optical images

We present innovative web tools, developed also in the frame of the FP7 ENDORSE (ENergy DOwnstReam SErvices) project, for the performance analysis and the support in planning of solar energy plants (PV, CSP, CPV). These services are based on the combination between the detailed physical model of each part of the plants and the near real-time satellite remote sensing of incident solar irradiance. Starting from the solar Global Horizontal Irradiance (GHI) data provided by the Monitoring Atmospheric Composition and Climate (GMES-MACC) Core Service and based on the elaboration of Meteosat Second Generation (MSG) satellite optical imagery, the Global Tilted Irradiance (GTI) or the Beam Normal Irradiance (BNI) incident on plant's solar PV panels (or solar receivers for CSP or CPV) is calculated. Combining these parameters with the model of the solar power plant, using also air temperature values, we can assess in near-real-time the daily evolution of the alternate current (AC) power produced by the plant. We are therefore able to compare this satellite-based AC power yield with the actually measured one and, consequently, to readily detect any possible malfunctions and to evaluate the performances of the plant (so-called “Controller” service). Besides, the same method can be applied to satellite-based averaged environmental data (solar irradiance and air temperature) in order to provide a Return on Investment analysis in support to the planning of new solar energy plants (so-called “Planner” service). This method has been successfully applied to three test solar plants (in North, Centre and South Italy respectively) and it has been validated by comparing satellite-based and in-situ measured hourly AC power data for several months in 2013 and 2014. The results show a good accuracy: the overall Normalized Bias (NB) is − 0.41%, the overall Normalized Mean Absolute Error (NMAE) is 4.90%, the Normalized Root Mean Square Error (NRMSE) is 7.66% and the overall Correlation Coefficient (CC) is 0.9538. The maximum value of the Normalized Absolute Error (NAE) is about 30% and occurs for time periods with highly variable meteorological conditions. - Highlights: • We developed an online service (Controller) dedicated to solar energy plants real-time monitoring • We developed an online service (Planner) that supports the planning of new solar energy plants • The services are based on the elaboration of satellite optical imagery in near real-time • The validation with respect to in-situ measured hourly AC power data for three test solar plants shows good accuracy • The maximum value of the Normalized Absolute Error is about 30% and occurs for highly variable meteorological conditions.

14 SOLAR ENERGY↗

Temporal variability in urinary levels of drinking water disinfection byproducts dichloroacetic acid and trichloroacetic acid among men

Urinary haloacetic acids (HAAs), such as dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA), have been suggested as potential biomarkers of exposure to drinking water disinfection byproducts (DBPs). However, variable exposure to and the short elimination half-lives of these biomarkers can result in considerable variability in urinary measurements, leading to exposure misclassification. Here we examined the variability of DCAA and TCAA levels in the urine among eleven men who provided urine samples on 8 days over 3 months. The urinary concentrations of DCAA and TCAA were measured by gas chromatography coupled with electron capture detection. We calculated the intraclass correlation coefficients (ICCs) to characterize the within-person and between-person variances and computed the sensitivity and specificity to assess how well single or multiple urine collections accurately determined personal 3-month average DCAA and TCAA levels. The within-person variance was much higher than the between-person variance for all three sample types (spot, first morning, and 24-h urine samples) for DCAA (ICC=0.08–0.37) and TCAA (ICC=0.09–0.23), regardless of the sampling interval. A single-spot urinary sample predicted high (top 33%) 3-month average DCAA and TCAA levels with high specificity (0.79 and 0.78, respectively) but relatively low sensitivity (0.47 and 0.50, respectively). Collecting two or three urine samples from each participant improved the classification. The poor reproducibility of the measured urinary DCAA and TCAA concentrations indicate that a single measurement may not accurately reflect individual long-term exposure. Collection of multiple urine samples from one person is an option for reducing exposure classification errors in studies exploring the effects of DBP exposure on reproductive health. - Highlights: • We evaluated the variability of DCAA and TCAA levels in the urine among men. • Urinary DCAA and TCAA levels varied greatly over a 3-month period. • Single measurement may not accurately reflect personal long-term exposure levels. • Collecting multiple samples from one person improved the exposure classification.

54 ENVIRONMENTAL SCIENCES↗

Research on the influence of anaerobic stabilization of various dairy sewage sludge on biodegradation of polycyclic aromatic hydrocarbons PAHs with the use of effective microorganisms

Sewage sludge was taken from a dairy WWTP belonging to Mlekovita Cooperative in Wysokie Mazowieckie. There were excess sludge, flotation sludge and a mixture of excess and flotation sludge from pre-treatment of dairy sewage. The initial content of 16 PAHs in excess sludge before fermentation was approximately 689 µg·kg{sup −1} in dry mass, whereas in post-flotation sludge (which constituted around 30% of raw sludge) it was approximately 95 µg·kg{sup −1} in dry mass. A mixture of excess and flotation sludge had the content of 497,7 µg·kg{sup −1} in dry mass. Through comparison of particular hydrocarbons content in raw sewage sludge to the total PAHs content, it was shown that tricyclic compounds, which constituted 46,3% of the PAHs sum (excess sludge), and tetracyclic compounds, which constituted 60,0% of the PAHs sum (flotation sludge), were the dominating fractions. In the sludge subjected to fermentation in reactors with mixed sludge and surplus activated sludge, the general trend of the course of changes in concentrations of PAHs was similar. Both in the sludge inoculated with EM and in that not inoculated with EM, a significant increase in the total PAHs contents was observed in the first fermentation phase (acidic fermentation) after 7 days of the process. Addition of EM into the sludge did not prevent the PAHs release, and therefore higher concentrations of PAHs sum were recorded during the hydrolysis stage than in sludge before fermentation. A decrease in the sum of PAHs was observed after 2 weeks of fermentation in relation to the quantity observed after 1 week of fermentation (except from post-flotation sludge). In the following weeks, there was further decrease in the concentration of the 16 PAHs sum in all sludge types. However, in sludge without EM inoculation, it was lower than in sludge with EM inoculation. The loss of the majority of tested hydrocarbons was reported in the final phase of fermentation. - Highlights: • The influence of applying Effective Microorganisms on PAHs degradation in dairy sewage sludge during fermentation has been examined. • To study the relationship between quantitative parameters and to describe the correlation strength, Spearman's rank correlation coefficient was used. • In order to verify whether there was a statistically significant change, the Wilcoxon test was applied for individual observation pairs.

54 ENVIRONMENTAL SCIENCES↗

Interfacial thermal conductance between multi-layer graphene sheets and solid/liquid octadecane: A molecular dynamics study

Mixtures of paraffin and carbon nanofillers have promising potential for thermal storage, as paraffin (the matrix) possesses high latent heat and the nanofillers compensate for the low thermal conductivity (TC) of paraffin. Understanding thermal transport in these materials is essential for practical applications, as weak thermal transport hinders fast charge/discharge of thermal energy. Here, we use non-equilibrium molecular dynamics (NEMD) simulations to study the interfacial thermal conductance (ITC) between graphene sheets and octadecane (C18H38) matrix under the limiting conditions of the sheets being parallel or perpendicular to the direction of the imposed heat flux. The findings show that the systems containing thin graphene layers exhibit higher values of ITC. This study captures the asymptotic saturation of thermal conductance for the liquid phase of the perpendicular structure. Besides, given the greater number of structured layers of paraffin upon phase change, the ITC for the solid paraffin-graphene system is higher than the conductance of the liquid paraffin-graphene interface. We use the Pearson correlation coefficients of the vibrational power spectrum (VPS) of interfacing materials to explain the orders of magnitude variations of the observed ITC.

25 ENERGY STORAGE↗