Search NASA⌕ Search

SEARCH · Search NASA

Results for “data driven control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Programming Abstractions for Managing Workflows on Tiered Storage Systems

Scientific workflows in High Performance Computing (HPC) environments are processing large amounts of data. The storage hierarchy on HPC systems is getting deeper, driven by new technologies (NVRAMs, SSDs, etc.) There is a need for new programming abstractions that allow users to seamlessly manage data at the workflow level on multi-tiered storage systems, and provide optimal workflow performance and use of storage resources. In previous work, we introduced a software architecture Managing Data on Tiered Storage for Scientific Workflows (MaDaTS) that used a Virtual Data Space (VDS) abstraction to hide the complexities of the underlying storage system while allowing users to control data management strategies. In this article, we detail the data-centric programming abstractions that allow users to manage a workflow around its data on the storage layer. The programming abstractions simplify data management for scientific workflows on multi-tiered storage systems, without affecting workflow performance or storage capacity. We measure the overheads and effectiveness introduced by the programming abstractions of MaDaTS. Our results show that these abstractions can optimally use the storage capacity in lesser capacity storage tiers, and simplify data management without adding any performance overheads.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Improvement of Atmospheric Objective Analysis Over Sloping Terrain and Its Impact on Shallow-Cumulus Clouds in Large-Eddy Simulations

Surface topography strongly impacts the regional atmospheric circulation dynamically and thermodynamically. Over the Great Plains in the United States, the gently tilted slope is an important factor that impacts clouds, convection and regional circulations. This study enhances an atmospheric constrained variational analysis by using a terrain-following sigma vertical coordinate and applies to the data collected at the Southern Great Plain (SGP) site of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program. Sensitivity studies are performed to examine the impact of the terrain effects on the derived large-scale atmospheric forcing fields and the simulated shallow-cumulus clouds in large-eddy simulation (LES) driven by the forcing. We found that the terrain impacts on the large-scale forcing fields are mainly at lower levels and are strongly controlled by up/downslope winds. The response of the derived forcing to the slope of the terrain is monotonic, but the response of the simulated shallow-cumulus clouds is more complex and depends on several factors. Overall, the terrain impact is small over SGP due to the small slope angle. However, the flat-surface assumption may cause larger biases in the large-scale forcing fields at locations with steeper terrain. The new sigma-coordinate algorithm, with its consideration of surface slope, should be more suitable to derive large-scale objective analysis over regions with steep terrain for application to force single-column models, cloud resolving models and LES models.

54 ENVIRONMENTAL SCIENCES↗

Anomaly Detection and Identification Using a Leave-One-Variable-Out Method

At nuclear power plants (NPPs), anomaly detection and identification (i.e., determining the causes of anomalies) are important tasks for ensuring the safe and efficient operation of NPPs. These tasks are currently labor-intensive and costly, and are made more difficult by the size and complexity of NPP systems. An alternative approach to conducting these tasks is to automate them, such as via the reconstruction-based contribution method, which is a well-researched unsupervised machine learning method that uses a data-driven model of anomaly-free behavior to detect events and then identify each variable’s contributions to those events. The present effort developed a novel contribution approach that utilized a leave-one-variable-out (LOVO) model, with which each variable is predicted using all the other variables. The novelty lay in transforming this model into a reconstruction model and modifying the identification algorithm to work with the new reconstruction model. To evaluate this method in a controlled environment, a synthetic dataset based on spring-mass-damper (SMD) systems (commonly found in mechanical engineering references) was used, with known anomalies introduced into the system. The proposed method successfully detected the anomalies and afforded insights into their causes, thus enabling the appropriate identifications to be made.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Digital Infrastructure Migration Framework Report

This document presents a full-scope Digital Infrastructure implementation and associated lifecycle support recommendations that enable a plant life of 80+ years. Specific technologies and software applications are researched, developed, selected, implemented, and then integrated by utilities to enhance safety, reliability, and economic performance such that the result provides much more than the sum of its parts. Specific selection of these technologies is driven by business case analyses which are utility, station, and unit specific.

42 ENGINEERING↗

Incorporating Valve Switching Losses Into a Static Optimal Control Algorithm for the Hybrid Hydraulic-Electric Architecture (HHEA)

The Hybrid Hydraulic-Electric Architecture (HHEA) has, in recent years, been proposed as an energy efficient alternative to conventional load-sensing architectures in mobile machines such as excavators and wheel-loaders. HHEA leverages the advantages of hydraulic power and electric power to eliminate throttling valves while also improving the energy and control performance of the system. The architecture utilizes a set of common pressure rails to provide a majority of power and and a small electric motor driven pump to modulate this power to meet the exact demand. Previous work has developed a computationally efficient Lagrange Multiplier approach for determining the optimal pressure rail selections that minimizes the energy losses in the system. The static model used considers only the energy use for each pressure rail selection but not the losses associated with the valves during the transition. This paper presents an approach to include the switching losses in the model and in the optimization procedure. To capture the switching losses, switching events between different rails and at various input and output flow rates were simulated with consideration of valve spool dynamics. A parameterized model that summarizes the losses is then obtained, allowing switching losses to be added to the previous energy analysis. The performance of the switching loss model was compared with reference data obtained from a high-fidelity simulation model. To incorporate the switching losses into optimal control algorithm, an efficient dynamic programming approach that prevents frequent switching is adopted in place of the Lagrange multiplier approach. The overall effect of switching losses on the energy consumption and optimal control decisions is presented. In general, switching losses contribute to about 9–10% of input energy.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Protection of Inverter-Dependent Transmission Systems (PROTECT-IT)

This presentation highlights the overall objectives of the SETO funded protection project. The main technical approaches are also highlighted. This high impact project produces multiple innovative outcomes, including comprehensive impact study of how IBR affects protection elements, simplified low-order IBR model for protection engineers, enhanced and data-driven protection design, co-design concept for coordination protection and IBRs.

14 SOLAR ENERGY↗

Data mining and statistical inference in selective laser melting

Selective laser melting (SLM) is an additive manufacturing process that builds a complex three-dimensional part, layer-by-layer, using a laser beam to fuse fine metal powder together. The design freedom afforded by SLM comes associated with complexity. As the physical phenomena occur over a broad range of length and time scales, the computational cost of modeling the process is high. At the same time, the large number of parameters that control the quality of a part make experiments expensive. In this paper, we describe ways in which we can use data mining and statistical inference techniques to intelligently combine simulations and experiments to build parts with desired properties. We start with a brief summary of prior work in finding process parameters for high-density parts. We then expand on this work to show how we can improve the approach by using feature selection techniques to identify important variables, data-driven surrogate models to reduce computational costs, improved sampling techniques to cover the design space adequately, and uncertainty analysis for statistical inference. Here, our results indicate that techniques from data mining and statistics can complement those from physical modeling to provide greater insight into complex processes such as selective laser melting.

36 MATERIALS SCIENCE↗

Continental-Scale Controls on Hyporheic Respiration Revealed by Knowledge-Guided Machine Learning

Hyporheic zone sediments regulate organic matter turnover and in-stream respiration, yet controls on sediment respiration remain poorly constrained across heterogeneous river networks, limiting prediction of stream metabolism and carbon processing at continental scales. Here, we integrate observations from ~90 river corridors across the United States in the WHONDRS consortium with a knowledge-guided machine learning (KGML) framework that couples thermodynamic rate theory with machine learning to identify dominant controls on hyporheic respiration. Diagnostic analyses show that organic matter concentration and thermodynamic favorability define an upper bound on respiration potential, whereas biological catalytic capacity and physical accessibility jointly govern realized respiration rates through interaction effects. To represent unmeasurable accessibility constraints, we use the mechanistic model as a scaffold for KGML, allowing machine learning to target residual structure not explained by process theory. This hybrid framework improves predictive skill relative to both the mechanistic model alone and fully data-driven models while preserving interpretability. These results indicate that variability in hyporheic respiration is largely mechanistically structured and demonstrate how integrating process theory with explainable AI enhances predictive performance while enabling scalable synthesis of river corridor observations.

Zheng, Jianqiu↗

Use of Social Media to Target Information-Driven Arms Control and Nonproliferation Verification

There has been considerable discussion within the national security community, including a recent workshop sponsored by the U.S. State Department, about the use of social media for extracting patterns of collective behavior and influencing public perception in areas relevant to arms control and nonproliferation. This paper seeks to explore if, and how, social media can be used to supplement nonproliferation and arms control inspection and monitoring activities on states and sites of greatest proliferation relevance. In this paper, we set the stage for how social media can be applied in this problem space and describe some of the foreseen challenges, including data validation, sources and attributes, verification, and security. Using information analytics and data visualization capabilities available at Pacific Northwest National Laboratory (PNNL), we provide graphical examples of some social media "signatures" of potential relevance for nonproliferation and arms control purposes. We conclude by describing a proposed case study and offering recommendations both for further research and next steps by the policy community.

Social media analytics, open source information an↗

A compact x-ray diffraction system for dynamic compression experiments on pulsed-power generators

Pulsed-power generators can produce well-controlled continuous ramp compression of condensed matter for high-pressure equation-of-state studies using the magnetic loading technique. X-ray diffraction (XRD) data from dynamically compressed samples provide direct measurements of the elastic compression of the crystal lattice, onset of plastic flow, strength–strain rate dependence, structural phase transitions, and density of crystal defects, such as dislocations. Here, we present a cost-effective, compact, pulsed x-ray source for XRD measurements on pulsed-power-driven ramp-loaded samples. This combination of magnetically driven ramp compression of materials with a single, short-pulse XRD diagnostic will be a powerful capability for the dynamic materials’ community to investigate in situ dynamic phase transitions critical to equation of states. Finally, we present results using this new diagnostic to evaluate lattice compression in Zr and Al and to capture signatures of phase transitions in CdS.

47 OTHER INSTRUMENTATION↗

Massive Data, the Digitization of Science, and Reproducibility of Results

As the scientific enterprise becomes increasingly computational and data-driven, the nature of the information communicated must change. Without inclusion of the code and data with published computational results, we are engendering a credibility crisis in science. Controversies such as ClimateGate, the microarray-based drug sensitivity clinical trials under investigation at Duke University, and retractions from prominent journals due to unverified code suggest the need for greater transparency in our computational science. In this talk I argue that the scientific method be restored to (1) a focus on error control as central to scientific communication and (2) complete communication of the underlying methodology producing the results, ie. reproducibility. I outline barriers to these goals based on recent survey work (Stodden 2010), and suggest solutions such as the “Reproducible Research Standard” (Stodden 2009), giving open licensing options designed to create an intellectual property framework for scientists consonant with longstanding scientific norms.

97 MATHEMATICS AND COMPUTING↗

Bridging the gap: Deploying AI-based Models in Real-Time Fusion Plasma Control Systems

Achieving reliable real-time control in fusion plasma experiments requires strict timing guarantees across entire control algorithms. In earlier work by Abbate et al. (2023), we demonstrated the feasibility of neural-network-based control algorithms on the DIII-D tokamak using the internally developed open-source Keras2C library for model conversion into C (Conlin et al. (2021)). However, the initial implementations relied on data buffering and branching logic outside the neural network code, causing variability in execution times. Subsequent deployments on DIII-D and KSTAR—including the RTCAKENN algorithm for kinetic profile reconstruction—proved that minimizing branching and buffering throughout the pipeline yields consistent millisecond-level cycle times under real experimental conditions (Shousha et al. (2023)). However, keeping pace with rapidly evolving AI frameworks (e.g. PyTorch) is challenging. Finally, we, therefore, propose a community-driven open-source effort to expand the tool, enabling real-time deployment across diverse systems that require strictly bounded execution times.

AI-based models↗

Validation of the dynamic recrystallization (DRX) mechanism for whisker and hillock growth on thin films

Our study was performed to validate a first-principles model for whisker and hillock formation based on the cyclic dynamic recrystallization (DRX) mechanism in conjunction with long-range diffusion. The test specimens were evaporated Sn films on Si having thicknesses of 0.25 μm, 0.50 μm, 1.0 μm, 2.0 μm, and 4.9 μm. Air annealing was performed at 35°C, 60°C, 100°C, 120°C, or 150°C over a time duration of 9 days. The stresses, anelastic strains, and strain rates in the Sn films were predicted by a computational model based upon the constitutive properties of 95.5Sn-3.9Ag-0.6Cu (wt.%) as a surrogate for pure Sn. The cyclic DRX mechanism and, in particular, whether long whiskers or hillocks were formed, was validated by comparing the empirical data against the three hierarchal requirements: (1) DRX to occur at all: εc = A D o m Z n , (2) DRX to be cyclic: D o < 2D r, and (3) Grain boundary pinning (thin films): h versus d. Continuous DRX took place in the 2.0-μm and 4.9-μm films that resulted in short stubby whiskers. Depleted zones, which resulted solely from a tensile stress-driven diffusion mechanism, confirmed the pervasiveness of long-range diffusion so that it did not control whisker or hillock formation other than a small loss of activity by reduced thermal activation at lower temperatures. Furthermore, a first-principles DRX model paves the way to develop like mitigation strategies against long whisker growth.

36 MATERIALS SCIENCE↗

THE LESSER ROLE OF STARBURSTS IN STAR FORMATION AT z = 2

Two main modes of star formation are know to control the growth of galaxies: a relatively steady one in disk-like galaxies, defining a tight star formation rate (SFR)-stellar mass sequence, and a starburst mode in outliers to such a sequence which is generally interpreted as driven by merging. Such starburst galaxies are rare but have much higher SFRs, and it is of interest to establish the relative importance of these two modes. PACS/Herschel observations over the whole COSMOS and GOODS-South fields, in conjunction with previous optical/near-IR data, have allowed us to accurately quantify for the first time the relative contribution of the two modes to the global SFR density in the redshift interval 1.5 < z < 2.5, i.e., at the cosmic peak of the star formation activity. The logarithmic distributions of galaxy SFRs at fixed stellar mass are well described by Gaussians, with starburst galaxies representing only a relatively minor deviation that becomes apparent for SFRs more than four times higher than on the main sequence. Such starburst galaxies represent only 2% of mass-selected star-forming galaxies and account for only 10% of the cosmic SFR density at z {approx} 2. Only when limited to SFR > 1000 M{sub sun} yr{sup -1}, off-sequence sources significantly contribute to the SFR density (46% {+-} 20%). We conclude that merger-driven starbursts play a relatively minor role in the formation of stars in galaxies, whereas they may represent a critical phase toward the quenching of star formation and morphological transformation in galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Cybersecurity Attacks in Vehicular Sensors

Today's modern vehicles contain anywhere from sixty to one-hundred sensors and exhibit the characteristics of Cyber-Physical-Systems (CPS). There is a high degree of coupling, cohesiveness, and interactions among vehicle's CPS components (e.g., sensors, devices, systems, systems-of-systems) across sensing, communication, and control layers. Cyber-attacks in the sensing or communication layers can compromise the security of the control layer. This paper provides a detailed review of potential cyber threats related to the sensing layer. Notably, the focus is mainly towards two categories of sensors: vehicle dynamics sensors (e.g., Tire Pressure Monitoring Systems (TPMS), magnetic encoders, and inertial sensors) and environment sensors (e.g., Light Detection and Ranging (LiDAR), ultrasonic, camera, Radio Detection and Ranging (Radar) systems, and Global Positioning System (GPS) units). Furthermore, the paper also offers perspectives through existing countermeasures from literature and stresses the need for data-driven cybersecurity solutions.

97 MATHEMATICS AND COMPUTING↗

Data-Driven and Precursor-Group Uncertainty Propagation of Lattice Kinetic Parameters in UAM Benchmark

A new data-driven sampling-based framework was developed for uncertainty quantification (UQ) of the homogenized kinetic parameters calculated by lattice physics codes such as TRITON and Polaris. In this study, extension of the database for the delayed neutron data (DND) is performed by exploring more delayed neutron experiments and adding additional isotopes/actinides to the data libraries. Afterwards, the framework is utilized to obtain a deeper knowledge of the kinetic parameters’ sensitivity and uncertainty. The kinetic parameters include precursor-group-wise delayed neutron fraction (DNF) and decay constant. Input uncertainties include nuclear data (i.e., cross-sections) and DND (i.e., precursor group parameters and fractional delayed neutron yield). It is found that kinetic parameters, especially DNFs, have large uncertainties. The DNF uncertainty is driven by the cross-section uncertainties for LWR designs, while decay constant uncertainty is dominated by the DND uncertainties. The usage of correlated U-235 thermal DND in the UQ process significantly reduces the DND uncertainty contribution on the kinetic parameters. Large void fraction and presence of neutron absorber (e.g., control rod) increase the DNF uncertainty due to the hardening of neutron spectrum. High correlation between the DNF groups ( β 1 , . . , β 6 ) is observed, while the decay constant groups ( λ 1 , . . , λ 6 ) show weak correlation to each other and also to DNF groups. The DNF uncertainties of the dominant precursor group 4 for PWR, BWR, and VVER are about 7.5%, 9.4%, and 7.6%, respectively. The DNF uncertainty grows to larger values after fuel burnup. Kinetic parameters’ values and uncertainties provided here can be efficiently used in subsequent core calculations, point reactor kinetics, and other applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Widespread deep seismicity in the Delaware Basin, Texas, is mainly driven by shallow wastewater injection

Significance The Delaware Basin, western Texas, has experienced a surge in the number of earthquakes. We investigate basin-wide earthquake, hydrogeologic, industrial, and geodetic data spanning 1993–2020 to identify the reasons for the increase. We use these data and models to quantify the stress changes from wastewater injection and hydrocarbon extraction. We demonstrate that the basin-wide seismicity is dominated by the stresses caused by shallow injection that are transmitted vertically by deforming the underlying crust. We analyze both injection and production data to understand how subsurface properties control earthquake locations and timings. We suggest that injecting wastewater into porous formations will minimize seismic hazard. We establish a framework explaining why earthquakes sometimes occur and sometimes do not occur within human activity-impacted areas.

54 ENVIRONMENTAL SCIENCES↗

Satellite detection of soil moisture related water stress impacts on ecosystem productivity using the MODIS-based photochemical reflectance index

We report satellite remote sensing provides continuous observations of vegetation properties that can be used to estimate global terrestrial ecosystem gross primary production (GPP). The Photochemical Reflectance Index (PRI) has been shown to be sensitive to vegetation photosynthetic light use efficiency (LUE), GPP and canopy water-stress. Here in this paper, we use the NASA EOS MODIS (Moderate Resolution Imaging Spectroradiometer) based PRI with eddy covariance CO2 flux measurements and meteorological observations from 20 tower sites representing major plant functional type (PFT) classes within the continental USA (CONUS) to assess GPP sensitivity to soil moisture related water stress. The sPRI (scaled PRI) metric derived using MODIS band 13 as a reference channel (sPRI13) shows generally higher correspondence with tower GPP estimates than other potential MODIS reference bands. The sPRI13 observations were used as a proxy for soil moisture related water supply constraints to LUE within a satellite data driven terrestrial carbon flux model to estimate GPP (GPPPRI). The GPPPRI calculations show generally favorable correspondence with tower GPP estimates (0.457 ≤ R2 ≤ 0.818), except for lower GPPPRI performance over evergreen needleleaf forest (ENF) sites. A regional model sensitivity analysis using the sPRI13 as a water supply proxy indicated that water restrictions limit GPP over more than 21% of the CONUS domain, particularly in drier climate areas where atmospheric moisture deficits (VPD) alone are insufficient to represent both atmosphere demand and water supply controls affecting productivity. Our results indicate strong potential of the MODIS sPRI13 to represent soil moisture related water supply controls influencing photosynthesis, with enhanced (1-km resolution) delineation of these processes closer to the scale of in situ tower observations. Lastly, these observations may provide an effective tool for characterizing sub-grid spatial heterogeneity in soil moisture related controls that inform coarser scale observations and estimates determined from other satellite observations and earth system models.

47 OTHER INSTRUMENTATION↗