Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Real-Time Monitoring of Strain Accumulation and Relief during Epitaxy of Ultrathin Co Ferrite Films with Varied Co Content

Ultrathin Co x Fe 3-x O 4 films of high structural quality and with different Co content (x = 0.6–1.2) were prepared by reactive molecular beam epitaxy on MgO(001) substrates. Epitaxy of these ferrite films is extensively monitored by means of time-resolved (operando) X-ray diffraction recorded in out-of-plane geometry to characterize the temporal evolution of the film structure. The Co ferrite films show high crystalline ordering and smooth film interfaces independent of their Co content. All Co x Fe 3-x O 4 films exhibit enhanced compressive out-of-plane strain during the early stages of growth, which partly releases with increasing film thickness. When the Co content of the ferrite films increases, the vertical-layer distances increase, accompanied by slightly increasing film roughnesses. The latter result is supported by surface-sensitive low-energy electron diffraction as well as X-ray reflectivity measurements on the final films. In contrast, the substrate–film interface roughness decreases with increasing Co content, which is confirmed with X-ray reflectivity measurements. In addition, the composition and electronic structure of the ferrite films is characterized by means of hard X-ray photoelectron spectroscopy performed after film growth. The experiments reveal the expected increasing Fe 3+ /Fe 2+ cation ratios for a higher Co content.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Viking Radio Occultation Measurements of the Martian Atmosphere and Topography: Primary Mission Coverage

Radio occultation measurements were made at approximately 50 locations on Mars with the Viking Orbiter 1 S (2.3 GHz) and X (8.4 GHz) band tracking links during October 1976. The measurements have been used to study the topography and atmosphere of Mars at latitudes ranging from about 75 deg S to 70 deg N. By using the ingress and egress times obtained from the observed limb diffraction effects together with the best ephemerides available for the orbiter and the planet we have determined the surface elevations at the occultation points relative to the reference areoid. The observations agree with Mariner 9 and radar data to within 2 km. The mean atmospheric pressure at the areoid level was found to be 5.9 mbar during the northern midsummer season, a value which agrees quite well with data obtained at the landing sites. By comparing the new electron density measurements with earlier Mariner data we have determined that the temperature and the plasma scale height of the upper atmosphere appear to be functions of solar activity.

Fjeldbo, G.↗
NASA NTRS1984

High-Temperature Cyclic Oxidation Data, Volume 1

This first in a series of cyclic oxidation handbooks contains specific-weight-change-versus-time data and X-ray diffraction results derived from high-temperature cyclic tests on high-temperature, high-strength nickel-base gamma/gamma' and cobalt-base turbine alloys. Each page of data summarizes a complete test on a given alloy sample.

Barrett, C. A.↗
NASA NTRS1993

Pinhole Calibrator For Particle-Sizing Instrument

Rotating-pinhole calibrator designed for use in calibrating and testing optical instrument measuring sizes of cloud droplets, dust particles, and other small particles suspended in flowing air. Easily attachable to particle-size-measuring instrument and suitable for both quick verification of calibration in field and detailed calibration studies in laboratory. Calibrator used to determine such operating parameters of instrument as optical collection angles, depth of field, profile of laser beam used to measure particles, and response to trajectory of particle. Also used to align instrument. Pinhole reused any number of times without risk of variation in diffraction pattern. Furthermore, size of pinhole chosen precisely and at will.

Hovenac, Edward↗
NASA NTRS1993

Organometallic chemical vapor deposition and characterization of ZnGeP2/GaP multiple heterostructures on GaP substrates

The growth of ZnGeP2/GaP double and multiple heterostructures on GaP substrates by organometallic chemical vapor deposition is reported. These epitaxial films were deposited at a temperature of 580 C using dimethylzinc, trimethylgallium, germane, and phosphine as source gases. With appropriate deposition conditions, mirror smooth epitaxial GaP/ZnGeP2 multiple heterostructures were obtained on (001) GaP substrates. Transmission electron microscopy (TEM) and secondary ion mass spectroscopy (SIMS) studies of the films showed that the interfaces are sharp and smooth. Etching study of the films showed dislocation density on the order of 5x10(exp 4)cm(sup -2). The growth rates of the GaP layers depend linearly on the flow rates of trimethylgallium. While the GaP layers crystallize in zinc-blende structure, the ZnGeP2 layers crystallize in the chalcopyrite structure as determined by (010) electron diffraction pattern. This is the first time that multiple heterostructures combining these two crystal structures were made.

Xing, G. C.↗
NASA NTRS1992

Compressibility effects on dynamic stall of airfoils undergoing rapid transient pitching motion

The research was carried out in the Compressible Dynamic Stall Facility, CDSF, at the Fluid Mechanics Laboratory (FML) of NASA Ames Research Center. The facility can produce realistic nondimensional pitch rates experienced by fighter aircraft, which on model scale could be as high as 3600/sec. Nonintrusive optical techniques were used for the measurements. The highlight of the effort was the development of a new real time interferometry method known as Point Diffraction Interferometry - PDI, for use in unsteady separated flows. This can yield instantaneous flow density information (and hence pressure distributions in isentropic flows) over the airfoil. A key finding is that the dynamic stall vortex forms just as the airfoil leading edge separation bubble opens-up. A major result is the observation and quantification of multiple shocks over the airfoil near the leading edge. A quantitative analysis of the PDI images shows that pitching airfoils produce larger suction peaks than steady airfoils at the same Mach number prior to stall. The peak suction level reached just before stall develops is the same at all unsteady rates and decreases with increase in Mach number. The suction is lost once the dynamic stall vortex or vortical structure begins to convect. Based on the knowledge gained from this preliminary analysis of the data, efforts to control dynamic stall were initiated. The focus of this work was to arrive at a dynamically changing leading edge shape that produces only 'acceptable' airfoil pressure distributions over a large angle of attack range.

Chandrasekhara, M. S.↗
NASA NTRS2001

A Test of Macromolecular Crystallization in Microgravity: Large, Well-Ordered Insulin Crystals

Crystals of insulin grown in microgravity on space shuttle mission STS-95 were extremely well-ordered and unusually large (many > 2 mm). The physical characteristics of six microgravity and six earth-grown crystals were examined by X-ray analysis employing superfine f slicing and unfocused synchrotron radiation. This experimental setup allowed hundreds of reflections to be precisely examined for each crystal in a short period of time. The microgravity crystals were on average 34 times larger, had 7 times lower mosaicity, had 54 times higher reflection peak heights and diffracted to significantly higher resolution than their earth grown counterparts. A single mosaic domain model could account for reflections in microgravity crystals whereas reflections from earth crystals required a model with multiple mosaic domains. This statistically significant and unbiased characterization indicates that the microgravity environment was useful for the improvement of crystal growth and resultant diffraction quality in insulin crystals and may be similarly useful for macromolecular crystals in general.

Borgstahl, Gloria E. O.↗
NASA NTRS2005

One-Dimensional Photonic Crystal Superprisms

Theoretical calculations indicate that it should be possible for one-dimensional (1D) photonic crystals (see figure) to exhibit giant dispersions known as the superprism effect. Previously, three-dimensional (3D) photonic crystal superprisms have demonstrated strong wavelength dispersion - about 500 times that of conventional prisms and diffraction gratings. Unlike diffraction gratings, superprisms do not exhibit zero-order transmission or higher-order diffraction, thereby eliminating cross-talk problems. However, the fabrication of these 3D photonic crystals requires complex electron-beam substrate patterning and multilayer thin-film sputtering processes. The proposed 1D superprism is much simpler in structural complexity and, therefore, easier to design and fabricate. Like their 3D counterparts, the 1D superprisms can exhibit giant dispersions over small spectral bands that can be tailored by judicious structure design and tuned by varying incident beam direction. Potential applications include miniature gas-sensing devices.

Ting, David↗
DOE OSTI2012

Physics Opportunities of a Fixed-Target Experiment using the LHC Beams

We outline the many physics opportunities offered by a multi-purpose fixed-target experiment using the proton and lead-ion beams of the LHC extracted by a bent crystal. In a proton run with the LHC 7-TeV beam, one can analyze pp, pd and pA collisions at center-of-mass energy {radical}s{sub NN} {approx_equal} 115 GeV and even higher using the Fermi motion of the nucleons in a nuclear target. In a lead run with a 2.76 TeV-per-nucleon beam, {radical}s{sub NN} is as high as 72 GeV. Bent crystals can be used to extract about 5 x 10{sup 8} protons/sec; the integrated luminosity over a year reaches 0.5 fb{sup -1} on a typical 1 cm-long target without nuclear species limitation. We emphasize that such an extraction mode does not alter the performance of the collider experiments at the LHC. By instrumenting the target-rapidity region, gluon and heavy-quark distributions of the proton and the neutron can be accessed at large x and even at x larger than unity in the nuclear case. Single diffractive physics and, for the first time, the large negative-xF domain can be accessed. The nuclear target-species versatility provides a unique opportunity to study nuclear matter versus the features of the hot and dense matter formed in heavy-ion collisions, including the formation of the quark-gluon plasma, which can be studied in PbA collisions over the full range of target-rapidity domain with a large variety of nuclei. The polarization of hydrogen and nuclear targets allows an ambitious spin program, including measurements of the QCD lensing effects which underlie the Sivers single-spin asymmetry, the study of transversity distributions and possibly of polarized parton distributions. We also emphasize the potential offered by pA ultra-peripheral collisions where the nucleus target A is used as a coherent photon source, mimicking photoproduction processes in ep collisions. Finally, we note that W and Z bosons can be produced and detected in a fixed-target experiment and in their threshold domain for the first time, providing new ways to probe the partonic content of the proton and the nucleus.

08 HYDROGEN↗
DOE OSTI2021

Dynamic structural views in solar energy materials by femtosecond electron diffraction

Solar materials convert light into other forms of energy through excited state processes occurring on ultrafast time and atomic length scales. Understanding and controlling such nonequilibrium processes is essential for applications ranging from photovoltaics to photocatalysis. These processes are commonly studied by transient optical techniques, which resolve charge carrier dynamics. However, optical spectroscopy does not directly probe the atomic-scale motions that play a central role in the ultimate functionality of these materials. Filling this missing gap, ultrafast electron and x-ray scattering techniques enable monitoring of structural dynamics in materials with femtosecond time resolution. In this work, we focus on the use of ultrafast electron diffraction (UED) techniques to probe photoinduced energy conversion dynamics in solar energy materials. First, we discuss the use of UED as an ultrafast lattice thermometer allowing a direct probe of nonradiative relaxations such as hot carrier cooling and Auger recombination. Second, we present a time-resolved atomic pair distribution function analysis enabled by UED, which uncovers lattice deformations arising from excitation localization in materials. Finally, we provide an outlook looking toward new approaches for resolving in situ energy conversion dynamics and uncovering structure–property relationships in solar energy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Towards time-resolved MicroED grid preparation using mix-and-inject gas dynamic virtual nozzles

Recent progress in gas dynamic virtual nozzle (GDVN) technologies in combination with high-brilliance synchrotron and X-ray free-electron lasers (XFELs) has allowed the visualization of protein dynamics in crystallo by mixing macromolecular protein crystals with a substrate using tunable mixing times on the order of milliseconds to seconds prior to serial X-ray diffraction data collection. This has become the method of choice for high-resolution structure determination of intermediate states. However, such experiments require large counts of crystals of proper sizes for high-resolution data collection, and premium beam times for screening efforts. Cryogenic microcrystal electron diffraction (MicroED) represents a complementary technique that may be a more accessible avenue for time-resolved nanocrystallography compared with serial X-ray diffraction experiments. MicroED can produce full diffraction datasets from just a few submicrometre-thick crystals, and the approach is more readily accessible, requiring standard cryogenic transmission electron microscopy (TEM) equipment available at many universities and institutes. Cryogenic MicroED, like other forms of cryo-EM, begins with rapidly freezing biological material on electron microscopy grids. In the case of MicroED, micro- to nano-crystals (<500 nm thick) are deposited onto electron microscopy grids and plunge-frozen for subsequent electron diffraction data collection. Here, we have incorporated GDVN technology developed originally for XFEL experiments into the freezing process as a first step towards time-resolved studies. We describe the limited deposition efficiency of the model MicroED protein proteinase K on TEM grids using GDVNs, preceding sample vitrification and successful MicroED data collection. We discuss both the initial results from such experiments and the methodological challenges in developing this approach into a reliable workflow for millisecond-to-second time-resolved structural studies of macromolecules. Our results promise a strategy to deposit crystals on grids using GDVNs and determine high-resolution structures by MicroED, constituting a first step towards development of time-resolved MicroED experiments.

MicroED↗
DOE OSTI2015

Status of the AFP project in the ATLAS experiment

Status of the AFP project in the ATLAS experiment is summarized. The AFP system is composed of a tracker to detect intact, diffractively scattered protons, and of a time-of-flight detector serving to suppress background from pile-up interactions. The whole system, located around 210 m from the main ATLAS detector, is placed in Roman Pots which move detectors from and to the incident proton beams. A typical distance of the closest approach of the tracker to these beams is 2–3 mm. The main physics motivation lies in measuring diffractive processes in runs with not a very high amount of pile-up.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1984

Crystallization of fluorozirconate glasses

The crystallization of a number of glasses of the fluorozirconate family has been studied (using powder X-ray diffraction and DSC) as a function of time and temperature of heating. The main crystalline phases were beta BaZrF6 and beta BaZr2F10. Stable and metastble transformations to the low-temperature alpha phases were also investigated. The size of crystallites in fully devitrified glasses was calculated (from line broadening of the X-ray diffraction peaks) to be about 60 nm.

Bansal, Narottam P.↗
NASA NTRS1992

Wave diffraction in weak cosmic-ray-modified shocks

Weakly multidirectional, long-wavelength cosmic-ray-modified shocks are studied via multiple scale perturbation techniques. The effects of diffraction are discussed in terms of Green's function solutions of the linearized 1 + 3D Burgers and 1 + 3D KdVB equations, and also in terms of solutions with singular Dirac delta initial distributions. The solutions show a monotonic decrease of the wave-front curvature with increasing time owing to the effects of wave diffraction. The shape of the wave surface is discussed in terms of solutions S to the wave eikonal equation corresponding to singular initial conditions. For the fast magnetosonic wave propagating in the positive x-direction, the wave phase surface S = 0 has elliptic cross sections with the planes x = constant and has a convex paraboloidal shape. Plane-wave solutions of the 1 + 3D KdVB equation are discussed.

Webb, G. M.↗
DOE OSTI2014

Effect of heat treatment time on microstructure and electrical conductivity in LATP glass ceramics

Glass-ceramic is prepared by heat treatment of melt quenched 14Li{sub 2}O−9Al{sub 2}O{sub 3}−38TiO{sub 2}−39P{sub 2}O{sub 5} glass in the vicinity of crystallization temperature. Growth of ceramic phase is controlled by tuning heat treatment time at fixed temperature. Ceramic phase was identified to be LiTi{sub 2}(PO{sub 4}){sub 3} from X Ray Diffraction analysis. Microstructural evolution of this phase with hold time was observed under high resolution Scanning Electron Microscope. DC conductivity is observed to increase by 4-5 orders of magnitude in this glass-ceramic compared to parent glass. However, formation of pores and cracks with very large heat treatment time seem to hinder further increase of conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Determination of hydrogen site and occupancy in hydrous Mg 2 SiO 4 spinel by single-crystal neutron diffraction

Ringwoodite [(Mg,Fe 2+ ) 2 SiO 4 spinel] has been considered as one of the most important host minerals of water in the Earth's deep mantle. Its extensive hydration was observed in high-pressure synthesis experiments and also by its natural occurrence. Water can dissolve into ringwoodite as structurally bound hydrogen cations by substituting other cations, although the hydrogen site and its occupancy remain unclear. In this study, neutron time-of-flight single-crystal Laue diffraction analysis was carried out for synthetic hydrous ringwoodite. Hydrogen cations were found only in the sites in MgO 6 octahedra in the ringwoodite structure, which compensated the reduced occupancies of both magnesium and silicon cations. The refined cation occupancies suggest that the most plausible hydration mechanism is that three hydrogen cations simultaneously occupy an MgO 6 octahedron, whereas four such hydrogenated octahedra surround a vacant SiO 4 tetrahedron.

36 MATERIALS SCIENCE↗