Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Grid resolution requirement of chemical explosive mode analysis for large eddy simulations of premixed turbulent combustion

Full Article Figures & data References Citations Metrics Reprints & Permissions Read this article Abstract The grid resolution requirement for trustworthy Chemical Explosive Mode Analysis (CEMA) in Large Eddy Simulation (LES) of premixed turbulent combustion is proposed. Explicit filtering, to emulate the effect of the LES filter, is applied to one-dimensional laminar flame and three-dimensional planar turbulent flames across a wide range of Karlovitz numbers (5 - 239). The identification of the flame front by CEMA is found relatively insensitive to the cell size (Δ), while the combustion mode identification shows more significant sensitivity. Specifically, increasing Δ falsely enhances the auto-ignition and local extinction modes and suppresses the diffusion-assisted mode. Limited dependence of the CEMA performance on the turbulent combustion regime (Karlovitz number) is observed. A simple grid size criterion for reliable CEMA mode identification in LES is proposed as Δ ≲ δ L /2; The criterion can be relaxed to Δ ≲ δ L in the laminar flame limit. Furthermore, theoretical analysis is conducted on an idealised chemistry-diffusion system. The effects of the filtering process and turbulence on the local combustion mode are demonstrated, which is consistent with the numerical observations. Further, by incorporating turbulent combustion models in CEMA, potential improvement in identifying local combustion modes can be expected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Development and Understanding of Nb 3 Sn films for radiofrequency applications through a sample-host 9-cell cavity

Nb 3 Sn is a promising advanced material under development for superconducting radiofrequency cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed for particle accelerator applications. In this work, we report on successful Nb 3 Sn coatings on Nb in a 1 m-long 9-cell Nb sample-host cavity at Fermilab. The geometry of the first coating with only one Sn source made it possible to study the influence of Sn flux on the microstructure. Based on these results, we postulate a connection between recently observed anomalously large thin grains and uncovered niobium spots observed in the past by other authors (Trenikhina et al 2018 Supercond. Sci. Technol. 32 015004). A phenomenological model to explain how these anomalously large grains could form is proposed. Overall, this model is invoked to provide possible explanations for literature results from several groups and to guide key process parameters to achieve uniform vapor-diffusion coatings, when applied to complex structures as the multi-cell cavity under study.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Interfacial mixing in high-energy-density matter with a multiphysics kinetic model

We have extended here a recently developed multispecies, multitemperature Bhatnagar-Gross-Krook model [Haack et al., J. Stat. Phys. 168, 822 (2017)], to include multiphysics capabilities that enable modeling of a wider range of physical conditions. In terms of geometry, we have extended from the spatially homogeneous setting to one spatial dimension. In terms of the physics, we have included an atomic ionization model, accurate collision physics across coupling regimes, self-consistent electric fields, and degeneracy in the electronic screening. We apply the model to a warm dense matter scenario in which the ablator-fuel interface of an inertial confinement fusion target is heated, but for larger length and time scales and for much higher temperatures than can be simulated using molecular dynamics. Relative to molecular dynamics, the kinetic model greatly extends the temperature regime and the spatiotemporal scales over which we are able to model. In our numerical results we observe hydrogen from the ablator material jetting into the fuel during the early stages of the implosion and compare the relative size of various diffusion components (Fickean diffusion, electrodiffusion, and barodiffusion) that drive this process. We also examine kinetic effects, such as anisotropic distributions and velocity separation, in order to determine when this problem can be described with a hydrodynamic model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Photoinduced structural recovery dynamics of rare-earth nickelate thin films

Photoinduced structural dynamics of rare-earth nickelate thin films, NdNiO 3 and SmNiO 3 , grown on (001) oriented SrTiO 3 were studied using time-resolved x-ray diffraction. The evolution of the (002) Bragg peak was tracked following laser excitation. The recovery pathways were found to be strongly dependent on laser fluence for NdNiO 3 and distinct for the two rare-earth nickelates. The recovery of the (002) peak shifts was modeled using a one-dimensional thermal diffusion model which showed that the recovery processes are non-thermal at high fluences. For NdNiO 3 , the timescales for the recovery of the (002) peak shift were found to be closely related to Ni magnetism recovery, potentially indicating magneto-structural coupling. Moreover, the evolution of integrated intensity and full-width-half-maximum points towards the presence of a structural phase separation during recovery. In conclusion, our studies highlight structural recovery pathways in nickelates by comparing the distinct responses of the photoinduced metal-insulator transition in NdNiO 3 and SmNiO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Correlated dynamic disorder, octahedral tilts, and acoustic phonon softening in CsSnBr 3 and CsPbBr 3

Metal halide perovskites (MHPs) have emerged as highly promising materials for optoelectronic applications, with all-inorganic MHPs presenting enhanced stability compared to their hybrid counterparts. Here, in this study, we investigate the atomic dynamics and structural fluctuations in single crystals of CsSnBr⁢ 3 and CsPbBr⁢ 3 through systematic inelastic neutron scattering (INS) measurements as a function of temperature. Our experiments are compared with first-principle simulations, augmented with large-scale molecular dynamics modeling, based on machine-learned neural network potentials. Through both INS and simulations, we find quasi-elastic diffuse rods in reciprocal space in both compounds, originating from fluctuating planar domains featuring correlated tilts of Br octahedron. The diffuse rods exhibit a slow, overdamped dynamic process, modulated across 𝑸 space, reflecting the strong lattice anharmonicity of the inorganic framework. We do not find evidence for dynamic off-centering of the Sn 2+ ions besides phonon vibrations at the center of the Br octahedron. These results offer valuable insights into the unusual anharmonic atomic dynamics and intricate correlated structural distortions in MHPs, which will be critical for rationalizing and further tailoring their thermal and optoelectronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigation of Interfacial Layer for Friction Stir Scribe Welded Aluminum to Steel Joints

Friction stir scribe (FSS) welding as a recent derivative of friction stir welding has successfully fabricated a linear joint between automotive Al and steel sheets. However, there is a lack of understanding on its bonding mechanism. In this paper, the microstructures and phases at the bonding interface of FSS welded Al to ultra-high strength steel joints were studied using scanning electron microscopy and transmission electron microscopy. Based on the microstructural analysis, it is found that both mechanical and chemical bonding occurred simultaneously, and the energy-dispersive X-ray spectroscopy revealed that a thin intermetallic compound (IMC) layer was formed at the interface. Owing to the varied material flow and heat generation, the IMC layer thickness gradually decreased from the advancing side to the retreating side, and two IMCs (i.e. Fe2Al5 and Fe4Al13) were confirmed in different weld regions using diffraction pattern (or 1D fast Fourier transform pattern). Also, a Fe/Al solid solution was noticed in the IMC layer, and several Al fringes were found in the Fe-rich side in the scribe stir zone.

friction stir scribe welding, interfacial layer, i↗
DOE OSTI2025

Time-resolved tracking of cellulose biosynthesis and assembly during cell wall regeneration in live Arabidopsis protoplasts

Cellulose, the most abundant polysaccharide on earth composing plant cell walls, is synthesized by coordinated action of multiple enzymes in cellulose synthase complexes embedded within the plasma membrane. Multiple chains of cellulose fibrils form intertwined extracellular matrix networks. It remains largely unknown how newly synthesized cellulose is assembled into an intricate fibril network on cell surfaces. Here, we have established an in vivo time-resolved imaging platform to continuously visualize cellulose biosynthesis and fibril network assembly onArabidopsis thalianaprotoplast surfaces as the primary cell wall regenerates. Our observations provide the basis for a model of cellulose fibril network development in protoplasts driven by an interplay of multiscale dynamics that includes rapid diffusion and coalescence of nascent cellulose fibrils, processive elongation of single fibrils, and cellulose fibrillar network rearrangement during maturation. This study provides fresh insights into the dynamic and mechanistic aspects of cell wall synthesis at the single-cell level.

Science & Technology - Other Topics↗
DOE OSTI2024

Assessing Nonlinear Polarization in Electrochemical Cells using AC Impedance Spectroscopy

AC impedance spectroscopy is widely used to evaluate performance limitations in energy storage and conversion devices (e.g., batteries, supercapacitors, and fuel cells). This work shows that integrating the resistive elements in an equivalent circuit as functions of steady-state current enables one to recover overpotentials associated with different processes (e.g., ion migration, charge transfer, and diffusion) in nonlinear electrochemical power supplies. Closed form expressions for diffusion overpotentials are derived using this method for transmissive and reflective boundary conditions and three electrode symmetries (planar, cylindrical, and spherical). Discussion is also extended to macroscopically homogenous porous electrodes which are relevant for most real-world devices. Overall, the approach described herein is a powerful tool to identify rate-limiting steps and guide material/component design.

25 ENERGY STORAGE↗
DOE OSTI2024

Morphological Evolution and Dealloying During Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts

The dealloying corrosion behavior of the FCC Ni20Cr (wt%) in molten LiF-NaF-KF (FLiNaK) salts at 600 °C under varying applied potentials was investigated. Using in-operando electrochemical techniques and a multi-modal suite of characterization methods, we connect electrochemical potential, thermodynamic stability, and electro-dissolution kinetics to the corrosion morphologies. Notably, under certain potential regimes, a micron-scale bicontinuous structure, characterized by a network of interconnected pores and ligaments riched with the composition of the more noble (MN) element, becomes prominent. At other potentials both MN and less noble (LN) elements dealloy but at different rates. The dealloying process consists of lattice and grain boundary diffusion of Cr to the metal/salt interface, interphase Cr oxidation, accompanied by surface diffusion of Ni to form interconnected ligaments. At higher potentials, the bicontinuous porous structure undergoes further surface coarsening. Concurrently, Cr(II), Cr(III), and Ni(II) begin to dissolve, with the dissolution of Ni occurring at a significantly slower rate. When solid-state transport of Cr is exceeded by the interfacial rates, dealloying depths are limited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Limiting Retained Austenite Decomposition in Quenched and Tempered Steels: Influences of Rapid Tempering and Silicon

Tempering reactions are critical to microstructure and property control in martensitic steels. Here, retained austenite decomposition and cementite precipitation are monitored using Mössbauer spectroscopy in 4340 and 300-M steel under conventional and rapid tempering conditions. Tempering times are compared at a constant tempered hardness by increasing tempering temperatures associated with short time conditions to achieve equivalent matrix softening to that of longer tempering times. Time-temperature combinations that provide equivalent tempered hardness generated microstructures with similar dislocation densities and cementite precipitation fractions; these mechanisms are controlled by self-diffusion. However, systematic differences in retained austenite content were observed at a given degree of softening, where shorter tempering times exhibited higher levels of retained austenite compared to more conventional conditions. At low temperatures, the differences in retained austenite preservation between explored time-temperature conditions are attributed to corresponding differences in carbon diffusion distance (in austenite), the controlling diffusional process of retained austenite decomposition. At higher temperatures, retained austenite decomposition exhibits C-curve kinetic behavior in 4340. Thus, reduced thermodynamic driving force for cementite and ferrite formation at higher temperature is believed to play a role in restricting retained austenite decomposition within some short-time, high temperature tempering regimes. The addition of silicon pushes cementite precipitation and retained austenite decomposition to higher temperatures, although retained austenite decomposition is suppressed to a greater extent than cementite precipitation. Potential is illustrated for coupling rapid tempering with silicon alloying to produce appreciably tempered martensite (~490 HV) with relatively less retained austenite decomposition compared to conventional tempering conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Synthetic Spectra of Pair-instability Supernovae in 3D

Pair-instability supernovae (PISNe) may signal the deaths of extremely massive stars in the local Universe or massive primordial stars after the end of the Cosmic Dark Ages. Hydrodynamic simulations of these explosions, performed in 1D, 2D, and 3D geometry, have revealed the strong dependence of mixing in the PISN ejecta on dimensionality. This chemical rearrangement is mainly driven by Rayleigh–Taylor instabilities that start to grow shortly after the collapse of the carbon–oxygen core. We report on the effects of such mixing on the spectroscopic evolution of PISNe by post-processing explosion profiles with the radiation diffusion-equilibrium code SNEC and the implicit Monte Carlo–discrete diffusion Monte Carlo radiation transport code SuperNu . The first 3D radiation transport calculation of a PISN explosion is presented, yielding viewing-angle-dependent synthetic spectra and light curves. Our findings show that while 2D and 3D mixing does not significantly affect the light curves of PISNe, their spectroscopic and color evolution are impacted. Strong features of intermediate-mass elements dominated by silicon, magnesium, and oxygen appear at different phases and reach different intensities depending on the extent of mixing in the silicon/oxygen interface of the PISN ejecta. In contrast, we do not find a significant dependence of PISN light curves and spectra on viewing angle. These results showcase the capabilities of SuperNu to handle 3D radiation transport and highlight the importance of modeling time series of spectra in identifying PISNe with future missions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Oxidation of NiCr and NiCrMo Alloys at Low Temperatures

Oxidation of Ni-Cr and Ni-Cr-Mo was studied in operando with near ambient pressure x-ray photoelectron spectroscopy in the Cabrera-Mott regime. The oxidation temperature was 200 °C - a severely diffusion limited regime. The near-surface alloy is Cr-enriched after reduction of natives oxide in vacuum, and especially so for Ni-15Cr-6Mo. Mo-cations are integrated in the oxide and Mo(VI) dominates at the surface. The surface chemistry driven promotion of chromia by Mo predicted by theory is negated by the limited surface diffusion of reactants. Furthermore, pre-oxidation processing is proposed to control the oxide properties for use of Ni-Cr superalloys at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Solid-phase reactive inter-diffusion of Mg/B multilayers

A better understanding of the reaction of Mg and B in the solid-phase regime is needed for the low-temperature synthesis of MgB 2 films. Here in this paper, we study the kinetics of reactive inter-diffusion of Mg and B multilayers on glassy carbon substrates in the temperature range of 400-650°C. Results show that, at these temperatures, inter-diffusion is characterized by a single activation energy of ~0.45eV. The formation of the superconducting MgB 2 phase with critical temperatures of 25–31 K occurs at reaction temperatures of 450°C and above, with the rate of inter-diffusion obeying a power law with a kinetic exponent of ~0.3. This suggests that rate-limiting processes are the nucleation and growth of MgB 2 grains rather than diffusion and interfacial reactions. Implications of these results to the low-temperature synthesis of MgB 2 films are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Efficient First-Principles Methodology for the Calculation of the All-Phonon Inelastic Scattering in Solids

Inelastic scattering experiments are key methods for mapping the full dispersion of fundamental excitations of solids in the ground as well as nonequilibrium states. A quantitative analysis of inelastic scattering in terms of phonon excitations requires identifying the role of multiphonon processes. Here, we develop an efficient first-principles methodology for calculating the all-phonon quantum mechanical structure factor of solids. We demonstrate our method by obtaining excellent agreement between measurements and calculations of the diffuse scattering patterns of black phosphorus, showing that multiphonon processes play a substantial role. The present approach constitutes a step towards the interpretation of static and time-resolved electron, x-ray, and neutron inelastic scattering data.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Morphological–Electrical Property Relation in Cu(In,Ga)(S,Se) 2 Solar Cells: Significance of Crystal Grain Growth and Band Grading by Potassium Treatment

Abstract Solution‐processed Cu(In,Ga)(S,Se) 2 (CIGS) has a great potential for the production of large‐area photovoltaic devices at low cost. However, CIGS solar cells processed from solution exhibit relatively lower performance compared to vacuum‐processed devices because of a lack of proper composition distribution, which is mainly instigated by the limited Se uptake during chalcogenization. In this work, a unique potassium treatment method is utilized to improve the selenium uptake judiciously, enhancing grain sizes and forming a wider bandgap minimum region. Careful engineering of the bandgap grading structure also results in an enlarged space charge region, which is favorable for electron–hole separation and efficient charge carrier collection. Besides, this device processing approach has led to a linearly increasing electron diffusion length and carrier lifetime with increasing the grain size of the CIGS film, which is a critical achievement for enhancing photocurrent yield. Overall, 15% of power conversion efficiency is achieved in solar cells processed from environmentally benign solutions. This approach offers critical insights for precise device design and processing rules for solution‐processed CIGS solar cells.

Kim, Joo‐Hyun↗
DOE OSTI2019

Hydrate-filled Fracture Formation at Keathley Canyon 151, Gulf of Mexico, and Implications for Non-vent Sites

Near-vertical hydrate-filled fractures are found in subseafloor marine muds, at both advective methane vent sites and at sites without obvious methane and fluid advection (non-vent sites). At non-vent sites, the mechanisms that transport methane to the fractures and control how hydrate-filled fractures form are not well understood. However, these mechanisms are important to establish, as most of Earth's natural gas hydrate is likely bound in marine mud systems. In this work, we focus on understanding the origin of hydrate and how fracture form at non-vent sites by examining previously hydrate-bearing fractures in conventional cores taken from Keathley Canyon 151, U.S. northern Gulf of Mexico, drilled by the Gas Hydrate Joint Industry Project in 2005. We combine information from well logs, sediment cores, and science party results and add new X-ray computed tomography of archival sections and scanning electron microcopy of core samples to develop a conceptual model. We propose that locally generated microbial methane is transported via diffusion from small pores in marine mud into biomineralized burrows with larger pore size in a process called short-range migration. Hydrate forms in burrows once the methane diffuses into them and the dissolved methane concentration exceeds the solubility threshold. When hydrate fills a burrow, heave from additional hydrate growth places stress on the burrow edges, expands the fracture, and creates additional void space in which methane can diffuse and continue forming hydrate. Fractures slowly propagate in the direction of maximum principal stress.

58 GEOSCIENCES↗
DOE OSTI2023

Towards fast, accurate predictions of RF simulations via data-driven modeling: Forward and lateral models

Three machine learning techniques (multilayer perceptron, random forest, and Gaussian process) provide fast surrogate models for lower hybrid current drive (LHCD) simulations. A single GENRAY/CQL3D simulation without radial diffusion of fast electrons requires several minutes of wall-clock time to complete, which is acceptable for many purposes, but too slow for integrated modeling and real-time control applications. More accurate simulations with fast electron diffusion are even slower, requiring multiple hours of run time with parallel processing. The machine learning models use a database of 16,000+ GEN-RAY/CQL3D simulations for training, validation, and testing. Latin hypercube sampling methods implemented in πScope ensure that the database covers the range of 9 input parameters (n e0 , T e0 , I p , B t , R 0 , n ∥︀ , Z e f f , V loop , P LHCD ) with sufficient density in all regions of parameter space. The surrogate models reduce the computation time from minutes-hours to ms with high accuracy across the input parameter space. Data-driven surrogate models also allow for solving inverse and “lateral” problems. A surrogate model for the inverse problem maps from a desired current drive or power deposition profile to a set of input parameters that would result in such a profile, while a surrogate model for the lateral problem maps from a measured experimental quantity such as hard x-ray emission to a current drive or power deposition profile. In conclusion, the πScope database creation workflow is flexible and applicable to other RF simulation codes such as TORIC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Amino Acid Immobilization of Copper Surface Diffusion on Cu(111)

Surface diffusion and molecular self-assembly are two critically important processes in chemistry and nature. Amino acids deposited on a Cu(111) surface driving a separation at the 2D limit between self-assembling molecules and diffusing copper atoms is reported. Since the self-assembling amino acids prefer non-planar, tridentate bonding with neighboring adatoms, they attach to and immobilize diffusing copper adatoms on the surface. This chemical interaction freezes out the copper diffusion causing the condensation of solid copper adatom islands on the surface. Such separation and immobilization are observed for eight different amino acids, suggesting the generality of this phenomenon beyond a single amino acid species. Furthermore, at elevated temperatures, a disruption of the prototypical Ostwald ripening of adatom islands is also observed. Here, these results provide fundamental insight into chiral molecular self-assembly and its interplay with metal atom surface diffusion.

36 MATERIALS SCIENCE↗