Search NASA⌕ Search

SEARCH · Search NASA

Results for “effectiveness factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

The G2 erosion model: An algorithm for month-time step assessments

Highlights: • G2 is a soil erosion model for developing monthly erosion maps at regional scale. • G2 enhances the spatio-temporal variability of cover management and erosivity factors. • The V-factor models the impact of vegetation cover, land use and imperviousness layer. • G2 uses data from ESDAC, LUCAS, COPERNICUS, CORINE, SENTINEL and EU-DEM databases. • G2 has been applied in Strymonas Catchment, Crete, Cyprus and Albania catchments. A detailed description of the G2 erosion model is presented, in order to support potential users. G2 is a complete, quantitative algorithm for mapping soil loss and sediment yield rates on month-time intervals. G2 has been designed to run in a GIS environment, taking input from geodatabases available by European or other international institutions. G2 adopts fundamental equations from the Revised Universal Soil Loss Equation (RUSLE) and the Erosion Potential Method (EPM), especially for rainfall erosivity, soil erodibility, and sediment delivery ratio. However, it has developed its own equations and matrices for the vegetation cover and management factor and the effect of landscape alterations on erosion. Provision of month-time step assessments is expected to improve understanding of erosion processes, especially in relation to land uses and climate change. In parallel, G2 has full potential to decision-making support with standardised maps on a regular basis. Geospatial layers of rainfall erosivity, soil erodibility, and terrain influence, recently developed by the Joint Research Centre (JRC) on a European or global scale, will further facilitate applications of G2.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

A closure model for predicting crack growth under creep-fatigue loading

A strip-yield model was formulated here to simulate creep-fatigue crack growth and to quantify the influence of hold time on plasticity-induced crack closure during creep-fatigue crack growth. Creep-fatigue experiments have shown that longer creep hold times result in faster crack growth rates in subsequent fatigue cycles. This model advances the idea that a decrease of plasticity-induced crack closure is experienced by the crack during fatigue loading when a longer hold time is applied each creep-fatigue cycle. Consequently, the crack tip experiences an increase in the effective stress intensity factor range causing faster growth rate during the fatigue loading. The weight function method was used to compute stress intensity factors and surface displacements for cracks embedded in a material experiencing elastic, plastic and creep deformations at elevated temperatures. It is shown that the longer the hold time, the larger the creep deformation and crack opening displacements in the near crack-tip region. In turn, this leads to a decrease in the crack-tip opening stress/load and faster crack growth rates during the subsequent fatigue cycle. The model was used to perform simulations of creep-fatigue crack growth at elevated temperatures in a nickel-base superalloy and AISI 316 austenitic steel.

42 ENGINEERING↗
DOE OSTI2018

Thermo-physical properties of diamond nanofluids: A review

Nanofluids give ample opportunities to enhance the efficiency of thermal systems by improving the thermal properties of the host fluids. Because of its exceptional thermal, mechanical and electrical properties, diamond has attracted attention for use as a nanoparticle in fluids. Thereby, nanofluids have proven to be useful in applications, especially electronic cooling, where increasing thermal properties and avoiding electrical conductivity are vital. There have been numerous investigations of nanodiamond-nanofluid systems with many suggesting that considerable property enhancements, e.g., increased thermal conductivity, might be possible. Yet, those results have not been collectively compared or discussed. This paper reviews and summarizes the experimental values of the physical and thermal properties, including an appropriate focus on the thermal conductivity enhancement, of nanodiamond-nanofluid systems found in the literature as well as different techniques for thermal conductivity measurement. The effect of various factors on the thermal-physical properties of diamond nanofluids is also reviewed, and the stability and viscosity of diamond nanofluids are tabulated and compared. The preparation and properties of hybrid nanofluids containing diamond nanoparticles are analyzed and discussed in detail, and a list of potential uses for these enhanced heat transfer fluids in industrial and commercial applications is provided and deliberated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tangent functional connectomes uncover more unique phenotypic traits

Functional connectomes (FCs) containing pairwise estimations of functional couplings between pairs of brain regions are commonly represented by correlation matrices. As symmetric positive definite matrices, FCs can be transformed via tangent space projections, resulting into tangent-FCs. Tangent-FCs have led to more accurate models predicting brain conditions or aging. Motivated by the fact that tangent-FCs seem to be better biomarkers than FCs, we hypothesized that tangent-FCs have also a higher fingerprint. We explored the effects of six factors: fMRI condition, scan length, parcellation granularity, reference matrix, main-diagonal regularization, and distance metric. Our results showed that identification rates are systematically higher when using tangent-FCs across the “fingerprint gradient” (here including test-retest, monozygotic and dizygotic twins). Highest identification rates were achieved when minimally (0.01) regularizing FCs while performing tangent space projection using Riemann reference matrix and using correlation distance to compare the resulting tangent-FCs. Such configuration was validated in a second dataset (resting-state).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Ensemble-based flood vulnerability assessment for probable maximum flood in a changing environment

The magnitude and frequency of hydro-meteorological extremes are expected to increase in a changing environment in ways that threaten the security of US energy-water assets. These include probable maximum precipitation (PMP) and probable maximum flood (PMF), which are used as hydraulic design standards for highly sensitive infrastructures such as nuclear power plants and main dams. To assess the flood vulnerability due to PMP/PMF, an integrated high-resolution process-based hydro-meteorologic modeling framework was used to develop ensemble-based probabilistic flood maps based on best-available historic observations and future climate projections. A graphics processing unit–accelerated 2-dimensional hydrodynamic model was used to simulate the surface inundation areas corresponding to a total of 120 PMF hydrographs. These ensemble-based PMF maps were compared with flood maps obtained from the conventional deterministic PMP/PMF approach, revealing added information about conditional probability of flooding. Further, a relative sensitivity test was conducted to explore the effects of various factors in the framework, such as meteorological forcings, antecedent hydrologic conditions, reservoir storage, and flood model input resolution and parameters. In conclusion, the proposed framework better illustrates the uncertainties associated with model inputs, parameterization, and hydro-meteorological factors, allowing more informed decision-making for future emergency preparation.

58 GEOSCIENCES↗
DOE OSTI2020

Applying a Template of Expected Uncertainties to Updating 239 Pu(n,f) Cross-section Covariances in the Neutron Data Standards Database

Templates of uncertainties expected in specific measurement types were recently developed. One aim of these templates is to help evaluators in identifying (1) missing or suspiciously low uncertainties and (2) missing correlations between uncertainties of the same and different experiments, when estimating covariances for experimental data employed in their evaluations. These templates also provide realistic estimates of standard deviations and correlations for a particular uncertainty source and measurement type that can be used by evaluators in situations where they are not supplied by the experimenters. This information allows for a more comprehensive uncertainty analysis across all measurements considered in an evaluation and, thus, more realistic evaluated covariances. Here, in this work, we extend a template that is applicable to uncertainties expected in neutron-induced fission, (n,f), cross-section measurements. It is applied to improving covariances of 239 Pu(n,f) cross-section measurements in the database underlying the Neutron Data Standards evaluations. This particular example was chosen since this evaluation is primarily based on experimental information. Also, some uncertainties of individual 239 Pu(n,f) cross-section experiments in this database were suspected to be underestimated. The evaluated uncertainties obtained after updating the covariances in the database by means of the template indeed do increase compared to their original values. Even more importantly, the evaluated mean values change noticeably. These modified cross sections impact application calculations significantly, as is demonstrated by employing them in simulations of the effective neutron multiplication factor for a few selected critical assemblies. However, this updated evaluated 239 Pu(n,f) cross section should not be interpreted as the final one that should replace values of the current Neutron Data Standards project. Evaluations for the Neutron Data Standards of the 239 Pu(n,f) cross section must be linked to many other observables included in the associated database, most notably to cross sections for 235 U(n,f), but also to those for 10 B(n, α ), 6 Li(n,t), 238 U(n,f), and 238 U(n, γ ), because of included measurements of the 239 Pu(n,f) cross section that appear as ratios to these reactions. Some of these other reactions are correlated to further observables in the database. Hence, updating uncertainties of data sets of any of these observables can potentially impact the 239 Pu(n,f) cross section. Uncertainties for all measurements of these linked physical observables have to be updated before a comprehensive evaluation of the 239 Pu(n,f) cross section and its corresponding uncertainties can be provided.

239Pu Neutron-induced fission cross-section↗
DOE OSTI2020

Enhancing nuclear data validation analysis by using machine learning

In this work, we demonstrate how machine learning (ML) techniques can be used as an auxiliary tool for nuclear data validation analysis. The output of the ML analysis can inform evaluators and validators on the quality, or lack thereof, of specific nuclear data and benchmark experiments with respect to simulating these experimental benchmark values. To this end, measured and simulated effective neutron multiplication factors, k eff , of 875 selected ICSBEP critical assemblies and the latter's sensitivities with respect to nuclear data as well as benchmarks' features (e.g., material nuclide, core geometry) are used as input for a random forest (RF) regression model. The RF is used to encode the complex inter-dependencies between thousands of nuclear data features (i.e., sensitivity profiles and aspects describing the measurements) and 875 simulated and experimental k eff values in order to understand what nuclear data features are most informative for predicting bias. The complexity of relationships and high-dimensional space is difficult-to-impossible to search fully using simply expert judgment. As a first proof-of-concept—step, it is demonstrated that this technique is able to correctly trace large discrepancies between simulated and experimental k eff back to fabricated shortcomings in nuclear data that were perturbed to simulated k eff values. In a second, real-case scenario, step, the RF algorithm is used to validate the ENDF/B-VIII.0 library in comparison to ENDF/B-VII.1 nuclear data. One case is showcased where the chosen ML algorithms highlighted nuclear data (the 19 F(n,inl) cross section from 0.4–0.9 MeV) that are shown to be problematic by comparing them to associated differential experimental data and nuclear data from other libraries. In addition to that, it is shown that the RF results point towards poor benchmark experiments and associated underestimated uncertainties (e.g., the PU-SOL-THERM-028 series). However, using the RF algorithm for validating nuclear data with respect to k eff is currently limited to pinpointing groups of questionable nuclear data due to the inherent correlations between features introduced by the nuclear data themselves and how k eff is simulated. Due to this, we recommend that the ML methods presented be used to augment—rather than replace—the expert knowledge of evaluators and validators.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2017

Fast neutron background characterization with the Radiological Multi-sensor Analysis Platform (RadMAP)

In an effort to characterize the fast neutron radiation background, 16 EJ-309 liquid scintillator cells were installed in the Radiological Multi-sensor Analysis Platform (RadMAP) to collect data in the San Francisco Bay Area. Each fast neutron event was associated with specific weather metrics (pressure, temperature, absolute humidity) and GPS coordinates. Furthermore, the expected exponential dependence of the fast neutron count rate on atmospheric pressure was demonstrated and event rates were subsequently adjusted given the measured pressure at the time of detection. Pressure adjusted data was also used to investigate the influence of other environmental conditions on the neutron background rate. Using National Oceanic and Atmospheric Administration (NOAA) coastal area lidar data, an algorithm was implemented to approximate sky-view factors (the total fraction of visible sky) for points along RadMAPs route. In the three areas we analyzed, San Francisco, Downtown Oakland, and Berkeley, all demonstrated a suppression in the background rate of over 50% for the range of sky-view factors measured. This effect, which is due to the shielding of cosmic-ray produced neutrons by surrounding buildings, was comparable to the pressure influence which yielded a 32% suppression in the count rate over the range of pressures measured.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Assessment of bearing capacity of axially loaded monopiles based on centrifuge tests

The monopile has been widely used to support offshore and coastal structures. A series of centrifuge tests has been performed to investigate the bearing capacity of large diameter monopiles in sandy soil. Both static tests and cyclic tests have been conducted for open-ended and close-ended model piles, and the effects of influence factors, such as loading rates, embedment depths, and loading histories are considered. The piles are then loaded by a sequence of compressive-tensile loadings to estimate the tension capacity, from which the shaft friction is derived. The cyclic load tests are performed with five varying load intensities, and the accumulated settlement is assessed. The centrifuge tests indicate that the pile bearing capacity tends to increase with the initial penetration depth, and the stress state of soil greatly influences the pile behavior. The tensile shaft friction is smaller compared to the compression test. The capacities of the piles reduce significantly under the axial cyclic load, and the maximum cyclic load intensity should be limited to 75% of the ultimate bearing capacity. The API design method is used to calibrate with the centrifuge test results. The method overestimates the bearing capacity at larger depths, and a conservative reduction factor is required.

17 WIND ENERGY↗
DOE OSTI2026

Impact of the continuum on the γ decay of the lowest 2 + states in 14 C

The half-life, T 1/2 =14.6(33) fs, of the 7012-keV 2$^{+}_{1}$ state in 14 C was measured in an experiment employing the 9 Be( 6 Li,pγ) fusion-evaporation reaction and the GODDESS setup. The γ decay from the 2$^{+}_{2}$ near-threshold resonance, located 142 keV above the 8176-keV neutron-emission threshold, was also investigated. An upper limit of 4.0 × 10 –5 was established for the γ-decay branching ratio with respect to the neutron-decay channel. The B(E2) transition probabilities for these 2$^{+}_{1}$ and 2$^{+}_{2}$ states were compared to predictions from the Shell Model Embedded in the Continuum (SMEC). Significant modifications of these B(E2) probabilities, with respect to the standard shell model, are expected due to the coupling to the continuum. For calculations using the YSOX interaction, agreement was found for large negative values of V 0 , the coupling constant to the continuum. The central value V 0 = −645 MeV fm 3 results in a retardation by a factor ∼ 3.5 for the 2$^{+}_{1}$ → 0$^{+}_{1}$ transition, and an enhanced probability by a factor ∼ 2.5 for the γ-decay out of the 2$^{+}_{2}$ state. The latter factor reflects the effect of collectivization of the 2$^{+}_{2}$ excitation when the coupling to the continuum is taken into account.

14C↗
DOE OSTI2023

Growth of ZrO 2 films on mesoporous silica sieve via atomic layer deposition

The atomic layer deposition of ZrO 2 thin films over the mesopores of a mesoporous silica sieve, SBA-15 (Santa Barbara Amorphous-15), using the tetrakis(dimethylamino)zirconium(IV) (TDMAZ) as ZrO 2 precursor was tested and characterized using N 2 adsorption-desorption isotherms, taking advantage of the well-defined shape and size distribution of the pores in the SBA-15. Three samples were prepared, using 2, 4, and 6 deposition cycles to control the thickness of the films. It was determined that, as the average size of the pores decreased (with the increasing number of cycles), their size distribution remained narrow, indicating a homogeneous distribution of the ZrO 2 throughout the surfaces of the SBA-15 pores. This conclusion was confirmed by transmission electron microscopy and X-ray photoelectron spectroscopy. Further, the deposition rate appears to slow down after 4 cycles, an observation that we explain by different chemisorption properties of TDMAZ molecules over SBA-15 and ZrO 2 surface and by relating the kinetic diameter of TDMAZ with the pore diameter of SBA-15 after 4 deposition cycles: mass transport limitations have become significant at this point. They may be affected by complex factors like electronic effects caused by exposed ZrO 2 surface and the multi-directional adsorption of precursor molecules in the pore walls.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Process Modeling of CO 2 Absorption with Monoethanolamine Aqueous Solutions Using Rotating Packed Beds

A first-principle process simulation model is presented for the chemical absorption of carbon dioxide (CO 2 ) with monoethanolamine (MEA) aqueous solutions using rotating packed beds (RPB). Built on a proven rate-based packed bed absorber model, the RPB model rigorously simulates the phase and chemical equilibria at the vapor-liquid interface, the heat and mass transfer across the gas and liquid films, the fast reactions between MEA and CO 2 in the liquid film, and the RPB hydraulics. Here, estimation of the mass transfer rate across the liquid film is central to accurate simulation of the CO 2 absorption process with MEA aqueous solutions. We show that the literature lab-scale RPB data for CO 2 removal efficiency can be satisfactorily correlated by introducing a correction factor for the effective packing surface area predicted by the Onda correlation. Given the validated RPB model, we further show that, among the gas-phase mass transfer coefficient, the liquid-phase mass transfer coefficient, and the reaction rate constant for the reaction between amine and CO 2 , the reaction rate constant is the controlling step with the highest potential to enhance the CO 2 absorption performance in RPB.

42 ENGINEERING↗
DOE OSTI2025

Self-Assembled Oligomers Facilitate Amino Acid-Driven CO 2 Capture at the Air–Aqueous Interface

Direct air capture of CO 2 using amino acid absorbents, such as glycine or sarcosine, is constrained by the relatively slow mass transfer of CO 2 through the air–aqueous interface. Our recent study showed a marked improvement in CO 2 capture by introducing CO 2 -permeable oligo-dimethylsiloxane (ODMS-MIM + ) oligomers with cationic (imidazolium, MIM + ) headgroups. Here, in this work, we have employed all-atom molecular dynamics simulations in combination with subensemble analysis using network theory to provide a detailed molecular picture of the behavior of CO 2 and the glycinate anions (Gly – ) at the ODMS-MIM + decorated air–aqueous interfaces. We show that the cationic head groups of the surfactants enhance the concentration and lifetime of Gly – in the interfacial region, while ODMS tails promote the physisorption of CO 2 in the interfacial region. Together, these two factors increase the effective region of contact and the probability of interactions between CO 2 and Gly – compared to that of the pure air–aqueous interface. The fundamental insights gained in this work establish essential foundations for developing hybrid systems with oligomer-decorated interfaces to maximize the overall CO 2 capture rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Efficient Removal of Lead Ions from Aqueous Media Using Sustainable Sources Based on Marine Algae

The goal of this project is to explore a new method to efficiently remove Pb(II) ions from water by processing Undaria pinnatifida into immobilized beads using sodium alginate and calcium chloride. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Using immobilized U. pinnatifida, we investigated the effect of various factors on Pb(II) ion removal efficiency such as temperature, pH, ionic strength, time, and underlying biosorption mechanisms. For Pb(II) ion biosorption studies, Pb(II) ion biosorption data were obtained and analyzed using Langmuir and Freundlich adsorption models. It is found that the maximum Pb(II) ion adsorption capacity (X m ) of U. pinnatifida was estimated to be ~5 times greater than that of activated carbon, indicating the superior Pb(II) ion removal capability of U. pinnatifida compared to activated carbon. In addition, a thermodynamic study indicates that biosorption processes are found to be endothermic and an increase in the Pb(II) ion solution temperature provides a more preferential reaction toward Pb(II) ion biosorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Estimating Individual Tree Mortality in the Sierra Nevada Using Lidar and Multispectral Reflectance Data

Widespread tree mortality events occur during periods of severe drought in temperate conifer forests and are expected to become more frequent in many areas due to climate change. Improved mapping of individual tree mortality is needed to identify risk factors and design effective conservation strategies. In this study, we used National Ecological Observatory Network (NEON) lidar and multispectral reflectance airborne observations to map individual tree mortality over a 160 km 2 area during and after the 2012–2016 drought for two sites in California's Sierra National Forest. We used NEON lidar to derive tree locations and crown perimeters and multispectral data to map tree mortality for more than 1 million trees. We found that 25.4% of the trees in our study area died between 2013 and 2017, with considerably higher mortality at the lower-elevation Soaproot Saddle site. Between 2017 and 2019, an additional 2.0%–2.8% of the trees died each year. Two wildfires in 2020 and 2021 increased tree mortality within burned area perimeters by 49%–89% between 2019 and 2021. Consistent with previous work, we found that tree mortality risk increased as a function of tree height. Tree mortality was positively associated with distance from rivers, trees per hectare, and decreasing slope at the lower elevation site. In contrast, increasing slope was positively associated with tree mortality at the higher elevation site. Our approach and dataset provide a means to study the combined effects of drought and wildfire on tree mortality and may improve projections of forest resilience under a changing climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Spectroscopy of a tunable moiré system with a correlated and topological flat band

Abstract Moiré superlattices created by the twisted stacking of two-dimensional crystals can host electronic bands with flat energy dispersion in which enhanced interactions promote correlated electron states. The twisted double bilayer graphene (TDBG), where two Bernal bilayer graphene are stacked with a twist angle, is such a moiré system with tunable flat bands. Here, we use gate-tuned scanning tunneling spectroscopy to directly demonstrate the tunability of the band structure of TDBG with an electric field and to show spectroscopic signatures of electronic correlations and topology for its flat band. Our spectroscopic experiments are in agreement with a continuum model of TDBG band structure and reveal signatures of a correlated insulator gap at partial filling of its isolated flat band. The topological properties of this flat band are probed with the application of a magnetic field, which leads to valley polarization and the splitting of Chern bands with a large effective g-factor.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of interface piezoelectricity in superconducting devices on silicon

The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10−5%, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.

Zhou, Haoxin [University of California, Berkeley, ↗