Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

THE CROSS SPECTRAL TIME LAG EVOLUTION ALONG BRANCHES IN XTE J1701-462

We investigate the cross spectrum of XTE J1701-462 in various types of neutron star low-mass X-ray binary subclasses during its 2006-2007 outburst. We analyze the relation between the time lags and temporal variabilities. We find that the hard time lags accompany horizontal branch oscillations (HBOs) and the soft time lags dominate the noise in the low frequency range 0.1-10 Hz on HB. In the Cyg-like phase, the time lags decrease on the middle normal branch (NB) from HB/NB vertex to NB/FB vertex, whereas the time lags are roughly invariant in the Sco-like source. We discuss the fact that the Compton upscattering by the corona introduces the soft lag in low-frequency noise. We suggest that the variation of the Comptonization component from the disk emission leads to the HBOs' time lag evolutions along the Z tracks. We also report the rms amplitude spectrum and phase lag spectrum for the normal branch oscillation (NBO). A {approx}160 Degree-Sign phase lag is found. We find that the rms amplitudes of both the Cyg-like and the Sco-like NBOs linearly increase with the photon energy in low energy bands, and drop in the highest energy band.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronic Structure and Quadrupole Interactions in Promising Cathode Materials Na{sub x}M{sub y}(MoO{sub 4}){sub 3}, M = Mn, Fe, Co, and Ni

The electronic structure and the magnetic properties of molybdates Na{sub x}M{sub y}(MoO{sub 4}){sub 3} (M = Mn, Fe, Co, and Ni) which are promising materials for sodium batteries have been studied in the framework of the density functional theory with the GGA and GGA+U approximations for the first time. The calculations show that all the compounds are insulators. An important role of the correlation effects, provided by the on-site Coulomb interactions, was established in the formation of the band gap in these compounds. The quadrupole constants of {sup 23}Na nuclei are calculated in the nonmagnetic and ferromagnetic states within the GGA and GGA+U approaches. It is shown that the quadrupole frequencies for nonequivalent crystallographic positions of sodium are in different frequency ranges, which allows to study the diffusion of sodium in these compounds by the Nuclear Magnetic Resonance method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The properties of photonic band gaps for three-dimensional plasma photonic crystals in a diamond structure

In this paper, the properties of photonic band gaps (PBGs) for two types of three-dimensional plasma photonic crystals (PPCs) composed of isotropic dielectric and unmagnetized plasma with diamond lattices are theoretically investigated for electromagnetic waves based on a modified plane wave expansion method. The equations for type-1 structure are theoretically deduced, which depend on the diamond lattices realization (dielectric spheres immersed in plasma background). The influences of dielectric constant of dielectric, plasma collision frequency, filling factor, and plasma frequency on PBGs are investigated, respectively, and some corresponding physical explanations and the possible methods to realize the three-dimensional PPCs in experiments are also given. From the numerical results, it has been shown that not only the locations but also the gap/midgap ratios of the PBGs for two types of PPCs can be tuned by plasma frequency, filling factor, and the relative dielectric constant, respectively. However, the plasma collision frequency has no effect on the frequency ranges and gap/midgap ratios of the PBGs for two types of PPCs.

36 MATERIALS SCIENCE↗

Atomically localized plasmon enhancement in monolayer graphene

Plasmons in graphene can be tuned by using electrostatic gating or chemical doping, and the ability to confine plasmons in very small regions could have applications in optoelectronics, plasmonics and transformation optics. However, little is known about how atomic-scale defects influence the plasmonic properties of graphene. Moreover, the smallest localized plasmon resonance observed in any material to date has been limited to around 10 nm. Here, we show that surface plasmon resonances in graphene can be enhanced locally at the atomic scale. Using electron energy-loss spectrum imaging in an aberration-corrected scanning transmission electron microscope, we find that a single point defect can act as an atomic antenna in the petahertz (10{sup 15} Hz) frequency range, leading to surface plasmon resonances at the subnanometer scale.

36 MATERIALS SCIENCE↗

Elastodynamic behavior of the three dimensional layer-by-layer metamaterial structure

In this work, we numerically investigate for the first time the elastodynamic behavior of a three dimensional layer-by-layer rod structure, which is easy to fabricate and has already proved to be very efficient as a photonic crystal. The Finite Difference Time Domain method was used for the numerical calculations. For the rods, several materials were examined and the effects of all the geometric parameters of the structure were also numerically investigated. Additionally, two modifications of the structure were included in our calculations. The results obtained here (for certain geometric parameters), exhibiting a high ratio of longitudinal over transverse sound velocity and therefore a close approach to ideal pentamode behavior over a frequency range, clearly show that the layer-by-layer rod structure, besides being an efficient photonic crystal, is a very serious contender as an elastodynamic metamaterial.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation

The purpose of this work is to further develop experimental methodologies using flat punch nanoindentation to measure the constitutive behavior of viscoelastic solids in the frequency and time domain. The reference material used in this investigation is highly plasticized polyvinylchloride (PVC) with a glass transition temperature of -17 C. The nanoindentation experiments were conducted using a 983-{micro}m-diameter flat punch. For comparative purposes, the storage and loss modulus obtained by nanoindentation with a 103-{micro}m-diameter flat punch and dynamic mechanical analysis are also presented. Over the frequency range of 0.01-50 Hz, the storage and loss modulus measured using nanoindentation and uniaxial compression is shown to be in excellent agreement. The creep compliance function measured using a constant stress test performed in uniaxial compression and flat punch nanoindentation is also shown to correlate well over nearly 4 decades in time. In addition, the creep compliance function predicted from nanoindentation data acquired in the frequency domain is shown to correlate strongly with the creep compliance function measured in the time domain. Time-temperature superposition of nanoindentation data taken at 5, 10, 15, and 22 C shows the sample is not thermorheologically simple, and thus the technique cannot be used to expand the mechanical characterization of this material. Collectively, these results clearly demonstrate the ability of flat punch nanoindentation to accurately and precisely determine the constitutive behavior of viscoelastic solids in the time and frequency domain.

36 MATERIALS SCIENCE↗

Design and optimization of a bi-axial vibration-driven electromagnetic generator

To scavenge energy from ambient vibrations with arbitrary in-plane motion directions and over a wide frequency range, a novel electromagnetic vibration energy harvester is designed and optimized. In the harvester, a circular cross-section elastic rod, not a traditional thin cantilever beam, is used to extract ambient vibration energy because of its capability to collect vibration from arbitrary in-plane motion directions. The magnetic interaction between magnets and the iron core contributes to a nonlinear oscillation of the rod with increased frequency bandwidth. The influences of the structure configurations on the electrical output and the working bandwidth of the harvester are investigated using Ansoft's Maxwell 3D to achieve optimal performance. The experimental results show that the harvester is sensitive to vibrations from arbitrary in-plane directions and it exhibits a bandwidth of 5.7 Hz and a maximum power of 13.4 mW at an acceleration of 0.6 g (with g=9.8 ms⁻²).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gravitational wave background from binary systems

Basic aspects of the background of gravitational waves and its mathematical characterization are reviewed. The spectral energy density parameter {Omega}(f), commonly used as a quantifier of the background, is derived for an ensemble of many identical sources emitting at different times and locations. For such an ensemble, {Omega}(f) is generalized to account for the duration of the signals and of the observation, so that one can distinguish the resolvable and unresolvable parts of the background. The unresolvable part, often called confusion noise or stochastic background, is made by signals that cannot be either individually identified or subtracted out of the data. To account for the resolvability of the background, the overlap function is introduced. This function is a generalization of the duty cycle, which has been commonly used in the literature, in some cases leading to incorrect results. The spectra produced by binary systems (stellar binaries and massive black hole binaries) are presented over the frequencies of all existing and planned detectors. A semi-analytical formula for {Omega}(f) is derived in the case of stellar binaries (containing white dwarfs, neutron stars or stellar-mass black holes). Besides a realistic expectation of the level of background, upper and lower limits are given, to account for the uncertainties in some astrophysical parameters such as binary coalescence rates. One interesting result concerns all current and planned ground-based detectors (including the Einstein Telescope). In their frequency range, the background of binaries is resolvable and only sporadically present. In other words, there is no stochastic background of binaries for ground-based detectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Acoustic superradiance from optical vortices in self-defocusing cavities

In a self-defocusing optical cavity, optical-field perturbations on a vortex background behave as sound waves in a (2+1) rotating acoustic black-hole spacetime. Numerical integration of the associated Klein-Gordon equation using typical experimental parameters shows that optical perturbations in the appropriate frequency range are amplified through the mechanism of superradiance. These results suggest the possibility to observe this phenomenon in a common nonlinear optical system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-frequency aluminum nitride micro-filters for advanced RF communications.

An AlN MEMS resonator technology has been developed, enabling massively parallel filter arrays on a single chip. Low-loss filter banks covering the 10 MHz--10-GHz frequency range have been demonstrated, as has monolithic integration with inductors and CMOS circuitry. The high level of integration enables miniature multi-bandm spectrally aware, and cognitive radios.

42 ENGINEERING↗

Electrically tunable hot-silicon terahertz attenuator

We have developed a continuously tunable, broadband terahertz attenuator with a transmission tuning range greater than 10{sup 3}. Attenuation tuning is achieved electrically, by simply changing the DC voltage applied to a heating wire attached to a bulk silicon wafer, which controls its temperature between room temperature and ∼550 K, with the corresponding free-carrier density adjusted between ∼10{sup 11 }cm{sup −3} and ∼10{sup 17 }cm{sup −3}. This “hot-silicon”-based terahertz attenuator works most effectively at 450–550 K (corresponding to a DC voltage variation of only ∼7 V) and completely shields terahertz radiation above 550 K in a frequency range of 0.1–2.5 THz. Both intrinsic and doped silicon wafers were tested and demonstrated to work well as a continuously tunable attenuator. All behaviors can be understood quantitatively via the free-carrier Drude model taking into account thermally activated intrinsic carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrasonic, Non-Invasive Classification/Discrimination of Liquid Explosives (LEs) and Threat Liquids from Non-Threat Liquids in Sealed Containers

Government agencies and homeland security organizations are searching for more effective approaches for dealing with the increasing demand for inspections involving potential threat liquids and hazardous chemicals, including liquid explosives (LEs). The quantity and variability of hand-held and cargo-sized containers being shipped worldwide drives the need for rapid and effective ways for conducting non-intrusive inspections of liquid-filled containers of a diverse range of types, shapes and sizes. Such inspections need to quickly classify/discriminate between liquids within containers and also ascertain the presence of unexpected objects within a container. The science base, methodology and prototype device for classification/discrimination between classes of liquids has been developed. The Pacific Northwest National Laboratory (PNNL) has developed a methodology and prototype device for classification/discrimination of a wide variety of liquids (including threat liquids and their precursors), providing noninvasive liquid classification/discrimination capabilities using a nondestructive ultrasonic measurement approach for inspecting sealed containers. The Container Screening Device (CSD) employs frequency-modulated (FM) chirp excitation and pulse-compression signal processing techniques to measure ultrasonic velocity and a relative attenuation value for liquids within a container, and is capable of determining other acoustic properties from through-transmission, contact measurements over a wide frequency range. Recent algorithm developments are beginning to address the issues of container wall variations and thickness. A description of the basic science, measurement approach and sources of variability in the measurement will be presented and laboratory measurements acquired from a suite of commercial products and precursor liquids used in the manufacturing of Homemade Explosives (HMEs) will be given.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Generation of ultrahigh frequency air microplasma in a magnetic loop and effects of pulse modulation on operation

An atmospheric pressure air microplasma (APAMP) source was developed under ambient conditions using a magnetic loop at an operating frequency of 740 MHz. A self-igniting, stable APAMP was generated at 9.5 W. Pulse modulation (PM) was applied to the ultra high frequency signal. The effects of PM on self-ignition and operation of the APAMP source were studied by using a square wave modulating signal in the frequency range of 5-30 KHz. With the application of PM on the APAMP, in the best case, the plasma self-ignites and is sustained at 2.5 W.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study Regarding Electromagnetic Radiation Exposure Generated By Mobile Phone

Number of mobile phone users reached to 5 billion subscribers in 2010 [ABI Research, 2010]. A large number of studies illustrated the public concern about adverse effects of mobile phone radiation and possible health hazards. Position of mobile phone use in close proximity to the head leads the main radiation between the hand and the head. Many investigations studying the possible effects of mobile phone exposure, founded no measurable effects of short-term mobile phone radiation, and there was no evidence for the ability to perceive mobile phone EMF in the general population. In this study, field radiation measurements were performed on different brand and different models of mobile phones in active mode, using an EMF RF Radiation Field Strength Power Meter 1 MHz-8 GHz. The study was effectuated on both the 2G and 3G generations phones connected to the providers operating in the frequency range 450 MHz-1800 MHz. There were recorded values in outgoing call and SMS mode, incoming call and SMS mode. Results were compared with ICNIRP guidelines for exposure to general public.

61 RADIATION PROTECTION AND DOSIMETRY↗

Note: A three-dimension active vibration isolator for precision atom gravimeters

An ultra-low frequency active vibration isolator, simultaneously suppressing three-dimensional vibration noise, is demonstrated experimentally. The equivalent natural period of the isolator is 100 s and 12 s for the vertical and horizontal direction, respectively. The vibration noise in the vertical direction is about 50 times reduced during 0.2 and 2 Hz, and 5 times reduced in the other two orthogonal directions in the same frequency range. This isolator is designed for atom gravimeters, especially suitable for the gravimeter whose sensitivity is limited by vibration couplings.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental Verification of Reversed Cherenkov Radiation in Left-Handed Metamaterial

By using a phased electromagnetic dipole array to model a moving charged particle, we experimentally verified a reversed Cherenkov radiation in the left-handed media in the frequency range from 8.1 to 9.5 GHz. Our results demonstrate the feasibility of new types of particle detectors and radiation generators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation of electromagnetic waves by a pulsed loop antenna in a magnetoplasma

A study is made of the radiation from a pulsed loop antenna immersed in a cold collisionless magnetoplasma. Using a rigorous solution for the total field of such an antenna, the energy characteristics of its radiation are determined. The radiated energy and its distribution over the spatial and frequency spectra of the excited waves are analyzed as functions of the antenna and plasma parameters. Numerical results referring to the case where the frequency spectrum of the antenna current is concentrated in the whistler frequency range are reported. The results obtained can be useful in understanding the basic features of wave excitation by pulsed sources in a magnetoplasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anatomical background and generalized detectability in tomosynthesis and cone-beam CT

Purpose: Anatomical background presents a major impediment to detectability in 2D radiography as well as 3D tomosynthesis and cone-beam CT (CBCT). This article incorporates theoretical and experimental analysis of anatomical background ''noise'' in cascaded systems analysis of 2D and 3D imaging performance to yield ''generalized'' metrics of noise-equivalent quanta (NEQ) and detectability index as a function of the orbital extent of the (circular arc) source-detector orbit. Methods: A physical phantom was designed based on principles of fractal self-similarity to exhibit power-law spectral density ({kappa}/f{sup {beta}}) comparable to various anatomical sites (e.g., breast and lung). Background power spectra [S{sub B}(f)] were computed as a function of source-detector orbital extent, including tomosynthesis ({approx}10 deg. - 180 deg.) and CBCT (180 deg. +fan to 360 deg.) under two acquisition schemes: (1) Constant angular separation between projections (variable dose) and (2) constant total number of projections (constant dose). The resulting S{sub B} was incorporated in the generalized NEQ, and detectability index was computed from 3D cascaded systems analysis for a variety of imaging tasks. Results: The phantom yielded power-law spectra within the expected spatial frequency range, quantifying the dependence of clutter magnitude ({kappa}) and correlation ({beta}) with increasing tomosynthesis angle. Incorporation of S{sub B} in the 3D NEQ provided a useful framework for analyzing the tradeoffs among anatomical, quantum, and electronic noise with dose and orbital extent. Distinct implications are posed for breast and chest tomosynthesis imaging system design--applications varying significantly in {kappa} and {beta}, and imaging task and, therefore, in optimal selection of orbital extent, number of projections, and dose. For example, low-frequency tasks (e.g., soft-tissue masses or nodules) tend to benefit from larger orbital extent and more fully 3D tomographic imaging, whereas high-frequency tasks (e.g., microcalcifications) require careful, application-specific selection of orbital extent and number of projections to minimize negative effects of quantum and electronic noise. Conclusions: The complex tradeoffs among anatomical background, quantum noise, and electronic noise in projection imaging, tomosynthesis, and CBCT can be described by generalized cascaded systems analysis, providing a useful framework for system design and optimization.

62 RADIOLOGY AND NUCLEAR MEDICINE↗