Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Piezoelectric transformers for low-voltage generation of gas discharges and ionic winds in atmospheric air

To generate a gas discharge (plasma) in atmospheric air requires an electric field that exceeds the breakdown threshold of ∼30 kV/cm. Because of safety, size, or cost constraints, the large applied voltages required to generate such fields are often prohibitive for portable applications. In this work, piezoelectric transformers are used to amplify a low input applied voltage (<30 V) to generate breakdown in air without the need for conventional high-voltage electrical equipment. Piezoelectric transformers (PTs) use their inherent electromechanical resonance to produce a voltage amplification, such that the surface of the piezoelectric exhibits a large surface voltage that can generate corona-like discharges on its corners or on adjacent electrodes. In the proper configuration, these discharges can be used to generate a bulk air flow called an ionic wind. In this work, PT-driven discharges are characterized by measuring the discharge current and the velocity of the induced ionic wind with ionic winds generated using input voltages as low as 7 V. The characteristics of the discharge change as the input voltage increases; this modifies the resonance of the system and subsequent required operating parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Examination of ionic wind and cathode sheath effects in a E-field premixed flame with ion density measurements

The effect of the ionic wind on a premixed methane-air flame under a DC electric field is studied via mapping of the ion density with Langmuir probes. Ion densities were observed to increase near the burner with increasing electrode voltage up to 6 kV. Past this electrode supply voltage, ion densities ceased increasing and began to decline in some locations within the premixed flame. The increased ion density is caused by an increase in ionic wind force and cathode sheath thickness. The plateau in density is due to the cathode sheath fully encompassing the flame front which is the ion source, thereby collecting all ions in the flame. The spatial density data support the ionic wind hypothesis and provide further explanation of its limits based on the plasma sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure of ionic liquids with cationic silicon-substitutions

Significantly lower viscosities result when a single alkyl carbon is replaced by a silicon atom on the side chain of an ionic liquid cation. To further explore this effect, we compare liquid structure factors measured using high-energy X-ray scattering and calculated using molecular dynamics simulations. In this work, four ionic liquids are studied that each has a common anion, bis(trifluoromethylsulfonyl)amide (NTf${^–_2}$). The four cations for this series of NTf${^–_2}$-anion ionic liquids are 1-methyl-3-trimethylsilylmethylimidazolium (Si-mim + ), 1-methyl-3-neopentylimidazolium (C-mim + ), 1-methyl-3-pentamethyldisiloxymethylimidazolium (SiOSi-mim + ), and 1-methyl-1- trimethylsilylmethylpyrrolidinium (Si-pyrr + ). To achieve quantitative agreement between the structure factors measured using high-energy X-ray scattering and molecular dynamics simulations, new transferable parameters for silicon were calibrated and added to the existing force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic versus metallic bonding in Al n Na m and Al n Mg m (m ≤ 3, n + m ≤ 15) clusters

First principles electronic structure studies on the ground state geometries, stability, and the electronic structure of Al n Na m and Al n Mg m (m ≤ 3, n + m ≤ 15) clusters have been carried out to examine the nature of bonding between Na or Mg and Al. Identifying whether the bonding is ionic or metallic in bulk materials is typically straightforward; however, in small clusters where quantum confinement is important, the nature of bonding may become unclear. Here, we have performed a critical analysis of the bonding in these bimetallic clusters using charge analysis, electrical dipole moments, hybridization of the atomic orbitals, the Laplacian of the charge density at the bond critical points, and the change in the bonding energy between neutral and anionic forms of the cluster. For Na n Al m clusters, we find that the Na binding is primarily ionic, while the bonding in Al n Mg m is primarily metallic. We find that the Mulliken population of the 3 p orbital of Na and Mg can provide a rapid assessment of the nature of bonding. We also find that the Hirshfeld charge and dipole moments are effective indicators, when placed in context. We found that the Laplacian of the charge density at the bond critical points can be misleading in identifying whether the bonding is ionic or metallic in small clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and dynamics of short-chain polymerized ionic liquids

Combining experimental results obtained with X-ray scattering and field-gradient nuclear magnetic resonance (NMR) and an assessment of new and previous dielectric and rheology data, our study focuses on the molecular weight (M w ) evolution of local structure and dynamics in a homologous series of covalently bonded ionic liquids. Performed on a family of electrolytes with a tailored degree of ionic decoupling, this study reveals the differences between monomeric and oligomeric melts with respect to their structural organization, mass and charge transport, and molecular diffusion. Our work demonstrates that for the monomeric compound, the broadband conductivity and mechanical spectra reflect the same underlying distribution of activation barriers and that the Random Barrier Model describes fairly well both the ionic and structural relaxation processes in these materials. Moreover, the oligomers with chains comprising ten segments only exhibit both structural and dynamical fingerprints of a genuine polymer. A comparison of conductivity levels estimated using the self-diffusion coefficients probed via NMR and those probed directly with dielectric spectroscopy reflects the emerging of ion correlations which are affecting the macroscopic charge transport in these materials in a chain-length dependent manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A classical model for three-body interactions in aqueous ionic systems

We present a classical induction model to evaluate the three-body ion–water–water (I–W–W) and water–water–water (W–W–W) interactions in aqueous ionic systems. The classical description of the induction energy is based on electrostatic distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole on the O and H atoms of water. The monatomic ions were described by a point charge and a dipole–dipole polarizability, while for the polyatomic ions, distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole were used. The accuracy of the classical model is benchmarked against an accurate dataset of 936 (I–W–W) and 2184 (W–W–W) three-body terms for 13 different monatomic and polyatomic cation and anion systems. The classical model shows excellent agreement with the reference second order Moller–Plesset and coupled-cluster single double and perturbative triple [CCSD(T)] three-body energies. The Root-Mean-Square-Errors (RMSEs) for monatomic cations, monatomic anions, and polyatomic ions were 0.29, 0.25, and 0.12 kcal/mol, respectively. The corresponding RMSE for 1744 CCSD(T)/aVTZ three-body (W–W–W) energies, used to train MB-pol, was 0.12 kcal/mol. The accuracy of the proposed classical model demonstrates that the three-body term for aqueous ionic systems can be accurately modeled classically. This approach provides a fast, efficient, and as-accurate path toward modeling the three-body term in aqueous ionic systems that is fully transferable across systems with different ions without the need to fit to tens of thousands of ab initio calculations for each ion to extend existing many-body force fields to interactions between water and ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanodiffraction imaging of ionically driven phase separation in cobaltite heterostructures

Controlling the anionic stoichiometry and distribution of perovskite cobaltites presents a powerful method for tailoring the magnetic and electronic properties for magneto-ionic applications. Nevertheless, the influence of nanoscale morphology, including phase separation and defects in cobaltite heterostructures, remains largely unexplored. We used x-ray nanodiffraction to directly image the nanoscale topotactic phase transformation in La 1−x Sr x CoO 3 (LSCO) heterostructures capped with a reactive aluminum (Al) layer (i.e., oxygen “getter”) of varying thicknesses (0.5, 3, and 7 nm). Nanodiffraction images reveal the formation of highly elongated BM filaments extending over mesoscopic lengths (>67 μm), indicating a strong tendency toward oxygen vacancy ordering in both P and BM phases in all heterostructures. Local strain and strain gradient analysis shows a strong correlation between the depletion of the P phase and strain gradients. Our measurements suggest that elongation of the BM filaments is the predominant mechanism for topotactic transformation in LSCO/Al heterostructures, preferred over coarsening, branching, and fractal growth. Our study provides a detailed nanoscale analysis of ionically driven phase transitions in LSCO/Al heterostructures, which is crucial for tailoring the functional properties of cobaltites for magneto-ionic devices.

36 MATERIALS SCIENCE↗

Large deviations of ionic currents in dilute electrolytes

Here, we evaluate the exponentially rare fluctuations of the ionic current for a dilute electrolyte by means of macroscopic fluctuation theory. We consider the fluctuating hydrodynamics of a fluid electrolyte described by a stochastic Poisson–Nernst–Planck equation. We derive the Euler–Lagrange equations that dictate the optimal concentration profiles of ions conditioned on exhibiting a given current, whose form determines the likelihood of that current in the long-time limit. For a symmetric electrolyte under small applied voltages, number density fluctuations are small, and ionic current fluctuations are Gaussian with a variance determined by the Nernst–Einstein conductivity. Under large applied potentials, the ionic current distribution is generically non-Gaussian. Its structure is constrained thermodynamically by Gallavotti–Cohen symmetry and the thermodynamic uncertainty principle.

Farhadi, Jafar [University of California, Berkeley↗

Maximizing ion dynamics and electrochemical performance of ionic liquid-acetonitrile electrolyte in Ti 3 C 2 T x MXene

Modification of the structure and morphology of MXene electrodes and the formulation of the electrolytes used in their supercapacitor configurations are significant factors affecting the performance of electrochemical devices. In this study, we investigated the electrochemical performance and ion dynamics of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EmimTFSI], ionic liquid in the presence of acetonitrile (ACN) at different concentrations in Ti 3 C 2 T x MXene supercapacitor. We found an optimum concentration of ACN, at which more cations from the ionic liquid attach to the MXene electrode surface, providing higher electrochemical performance. This higher capacitance is also associated with increased microscopic dynamics of the cation away from the pore wall. These findings give a guideline to optimize the performance of MXene-based supercapacitors using organic solvents-ionic liquid-based electrolyte systems.

36 MATERIALS SCIENCE↗

Ionic switch controls the DNA state in phage λ

We have recently found that DNA packaged in phage λ undergoes a disordering transition triggered by temperature, which results in increased genome mobility. This solid-to-fluid like DNA transition markedly increases the number of infectious λ particles facilitating infection. However, the structural transition strongly depends on temperature and ionic conditions in the surrounding medium. Using titration microcalorimetry combined with solution X-ray scattering, we mapped both energetic and structural changes associated with transition of the encapsidated λ-DNA. Packaged DNA needs to reach a critical stress level in order for transition to occur. We varied the stress on DNA in the capsid by changing the temperature, packaged DNA length and ionic conditions. We found striking evidence that the intracapsid DNA transition is ‘switched on’ at the ionic conditions mimicking those in vivo and also at the physiologic temperature of infection at 37°C. This ion regulated on-off switch of packaged DNA mobility in turn affects viral replication. The results suggest a remarkable adaptation of phage λ to the environment of its host bacteria in the human gut. The metastable DNA state in the capsid provides a new paradigm for the physical evolution of viruses.

59 BASIC BIOLOGICAL SCIENCES↗

Pressure-induced loss of electronic interlayer state and metallization in the ionic solid Li[subscript 3]N: Experiment and theory

Results of x-ray diffraction and nitrogen K-edge x-ray Raman scattering (XRS) investigations of the crystal and electronic structure of ionic compound Li{sub 3}N across two high-pressure phase transitions [A. Lazicki et al., Phys. Rev. Lett. 95, 165503 (2005)] are interpreted using density-functional theory. A low-energy peak in the XRS spectrum which is observed in both low-pressure hexagonal phases of Li3N and absent in the high-pressure cubic phase is found to originate from an interlayer band similar to the important free-electron-like state present in the graphite and graphite intercalated systems, but not observed previously in ionic insulators. XRS detection of the interlayer state is made possible because of its strong hybridization with the nitrogen p bands. A pressure-induced increase in the band gap of the high-pressure cubic phase of Li{sub 3}N is explained by the differing pressure dependencies of different quantum-number bands and is shown to be a feature of several low-Z closed-shell ionic materials.

36 MATERIALS SCIENCE↗

Transient Nonlinear Response of Dynamically Decoupled Ionic Conductors

The present study demonstrates that large electric fields progressively enhance the conductivity of ionic systems up to timescales corresponding to those on which their structural rearrangements take place. Here, in many ionic materials, some regarded as candidates for electrical energy storage applications, the structural relaxation process can be tremendously slower than (or highly decoupled from) the charge fluctuations. Consequently, nonlinear dielectric spectroscopy may be employed to access rheological information in dynamically decoupled ionic conductors, whereas the combination of large electric power density and good mechanical stability, both technologically highly desired, imposes specific experimental constraints to reliably determine the steady-state conductivity of such materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a machine-learning-based ionic-force correction model for quantum molecular dynamic simulations of warm dense matter

In this work Δ learning is used to map orbital-free density functional theory (OF-DFT) ionic forces to the corresponding Kohn-Sham (KS) DFT ionic forces. The development of the approximate force difference in terms of the ion positions is constructed and serves as a stand in for the ground truth force difference. Descriptor vectors for ion configurations are constructed using all distance between ions in conjunction with an indexing based on a nearest neighbor ranking. It is demonstrated that such a scheme of descriptors can uniquely describe an ionic configuration up to a rotation and reflection when no ambiguity in the nearest neighbor ranking exists. How to handle the case when an ambiguity exists in the nearest neighbor ranking is discussed. As a proof of principle, the model is trained and tested on warm dense hydrogen at temperatures between 1 and 15 eV. Once tested, the model was used to perform molecular dynamic simulations of warm dense hydrogen. Furthermore, the resulting energies and pressures are within 1% and 2% of their respective target KS values.

36 MATERIALS SCIENCE↗

Electrochemical Polishing Applications and EIS of a Novel Choline Chloride-Based Ionic Liquid

Minimal surface roughness is a critical feature for high-field superconducting radio frequency (SRF) cavities used to engineer particle accelerators. Current methods for polishing Niobium cavities typically utilize solutions containing a mixture of concentrated sulfuric and hydrofluoric acid. Polishing processes such as these are effective, yet there are many hazards and costs associated with the use (and safe disposal) of the concentrated acid solutions. An alternative method for electrochemical polishing of the cavities was explored using a novel ionic liquid solution containing choline chloride. Potentiostatic electrochemical impedance spectroscopy (EIS) was used to analyze the ionic polishing solution. Final surface roughness of the Nb was found to be comparable to that of the acid-polishing method, as assessed by atomic force microscopy (AFM). This indicates that ionic liquid-based electrochemical polishing of Nb is a viable replacement for acid-based methods for preparation of SRF cavities.

36 MATERIALS SCIENCE↗

The Effect of Lengthening Cation Ether Tails on Ionic Liquid Properties

In order to explore the effect of multiple ether functionalities on ionic liquid properties, a series of ten pyrrolidinium ionic liquids and ten imidazolium ionic liquids bearing ether and alkyl side chains of varying lengths (4 to 10 atoms in length) were prepared for this study. Their physical properties, such as viscosity, conductivity and thermal profile were measured and compared. Consistent with earlier literature, a single ether substituent substantially decreases the viscosity of pyrrolidinium and imidazolium ILs compared to their alkyl congeners. Remarkably, as the number of ether units in the pyrrolidinium ILs increases there is hardly any increase in the viscosity, in contrast to alkylpyrrolidinium ILs where the viscosity increases steadily with chain length. Viscosities of imidazolium ether ILs increase with chain length but always remain well below their alkyl congeners. These results provide significant insight on the choice of starting materials for researchers designing ILs for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquid versus SiO 2 gated a-IGZO thin film transistors: A direct comparison

Here, ionic liquid gated field effect transistors have been extensively studied due to their low operation voltage, ease of processing and the realization of high electric fields at low bias voltages. Here, we report ionic liquid (IL) gated thin film transistors (TFTs) based on amorphous Indium Gallium Zinc Oxide (a-IGZO) active layers and directly compare the characteristics with a standard SiO 2 gated device. The transport measurements of the top IL gated device revealed the n-channel property of the IGZO thin film with a current ON/OFF ratio ~10 5 , a promising field effect mobility of 14.20 cm 2 V –1 s –1 , and a threshold voltage of 0.5 V. Comparable measurements on the bottom SiO2 gate insulator revealed a current ON/OFF ratio >108, a field effect mobility of 13.89 cm 2 V –1 s –1 and a threshold voltage of 2.5 V. Furthermore, temperature-dependent measurements revealed that the ionic liquid electric double layer can be “frozen-in” by cooling below the glass transition temperature with an applied electrical bias. Positive and negative freezing bias locks-in the IGZO TFT “ON” and “OFF” state, respectively, which could lead to new switching and possibly non-volatile memory applications.

36 MATERIALS SCIENCE↗

Towards Mixed Ionic and Electronic Conducting Li-Stuffed Garnets

Li-stuffed garnet-type Li 7 La 2.75 Ca 0.25 Zr 1.75 Nb 0.25 O 12 (LLCZNO) and Li 7+y La 2.75 Ca 0.25 Zr 1.75-y Nb 0.25 MyO 12 (M = Mn, Fe, Co, Ni; y = 0.1, 0.2, referred to as yM-LLCZNO) were synthesized in air by ceramic synthesis at different sintering temperatures. The resulting compositions were characterized for their phase formation and microstructure, and their ionic and electronic conductivities in air and 7% H 2 /N 2 . Powder X-ray diffraction showed that transition metal-doped LLCZNO garnets contain several impurity phases. The transition metal-substituted samples have lower conductivities than that of the parent LLCZNO. The electronic conductivities of selected transition metal-doped LLCZNO samples were found to be about 4 to 5 orders of magnitude lower than their corresponding ionic conductivity, highlighting the challenge to design single-phase mixed electronic and ionic conducting Li-stuffed garnets in both oxidizing and reducing atmospheres. The research area of single-phase mixed conducting Li-garnet is relatively unexplored at the moment, and a theoretical study will help to elucidate the underlying challenge in doping transition metal in Li-based garnets structure and its effect on transport properties.

25 ENERGY STORAGE↗

Uranyl oxalate species in high ionic strength environments: stability constants for aqueous and solid uranyl oxalate complexes

Uranyl ion, UO 2 2+ , and its aqueous complexes with organic and inorganic ligands can be the dominant species for uranium transport on the Earth surface or in a nuclear waste disposal system if an oxidizing condition is present. As an important biodegradation product, oxalate, C 2 O 4 2– , is ubiquitous in natural environments and is known for its ability to complex with the uranyl ion. Oxalate can also form solid phases with uranyl ion in certain environments thus limiting uranium migration. Therefore, the determination of stability constants for aqueous and solid uranyl oxalate complexes is important not only to the understanding of uranium mobility in natural environments, but also to the performance assessment of nuclear waste disposal. In this work, we developed a thermodynamic model for the UO 2 2+ –Na + –H + –Cl – –ClO 4 – –C 2 O 4 2– –NO 3 – –H 2 O system to ionic strength up to ~11 mol•kg –1 . We constrained the stability constants for UO 2 C 2 O 4 (aq) and UO 2 (C 2 O 4 ) 2 2– at infinite dilution based on our evaluation of the literature data over a wide range of ionic strengths up to ~11 mol•kg –1 . We also obtained the solubility constants at infinite dilution for solid uranyl oxalates, UO 2 C 2 O 4 •3H 2 O, based on the solubility data over a wide range of ionic strengths. The developed model will enable for the accurate stability assessment of oxalate complexes affecting uranium mobility under a wide range of conditions including those in deep geological repositories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗