Search NASA⌕ Search

SEARCH · Search NASA

Results for “model analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

A NASTRAN DMAP alter for the coupling of modal and physical coordinate substructures

A method is described to derive a generalized coordinate model consisting of flexible cantilever modes and rigid body modes from a physical coordinate model using a direct matrix abstraction procedure alter to rigid format 3. This model can readily be coupled to other substructures using modal synthesis techniques. It allows the use of a reduced size model for structural analyses while maintaining the capability of recovering the accelerations, forces, stresses, etc., from the original, large, complex model. This output recovery is accomplished with the use of a loads transformation matrix which relates the output parameters to the modal coordinate accelerations. In addition, a method is described to synthesize structural models consisting of hybrid coordinates for use in dynamic response analyses where one structure is described using physical coordinates and the other using generalized modal coordinates.

Wilson, T. L.↗

A multi criteria analog model for assessing the vulnerability of rural catchments to road spills of hazardous substances

Road spills of hazardous substances are common in developing countries due to increasing industrialization and traffic accidents, and represent a serious threat to soils and water in catchments. There is abundant literature on equations describing the wash-off of pollutants from roads during a storm event and there are a number of watershed models incorporating those equations in storm water quality algorithms that route runoff and pollution yields through a drainage system towards the catchment outlet. However, methods describing catchment vulnerability to contamination by road spills based solely on biophysical parameters are scarce. These methods could be particularly attractive to managers because they can operate with a limited amount of easily collectable data, while still being able to provide important insights on the areas more prone to contamination within the studied watershed. The purpose of this paper was then to contribute with a new vulnerability model. To accomplish the goal, a selection of medium properties appearing in wash-off equations and routing algorithms were assembled and processed in a parametric framework based on multi criteria analysis to define the watershed vulnerability. However, parameters had to be adapted because wash-off equations and water quality models have been developed to operate primarily in the urban environment while the vulnerability model is meant to run in rural watersheds. The selected parameters were hillside slope, ground roughness (depending on land use), soil permeability (depending on soil type), distance to water courses and stream density. The vulnerability model is a spatially distributed algorithm that was prepared to run under the IDRISI Selva software, a GIS platform capable of handling spatial and alphanumeric data and execute the necessary terrain model, hydrographic and thematic analyses. For illustrative purposes, the vulnerability model was applied to the legally protected Environmental Protection Area (APA), located in the Uberaba region, state of Minas Gerais, Brazil. In this region, the risk of accidents causing chemical spills is preoccupying because large quantities of dangerous materials are transported in two important distribution highways while the APA is fundamental for the protection of water resources, the riverine ecosystems and remnants of native vegetation. In some tested scenarios, model results show 60% of vulnerable areas within the studied area. The most sensitive parameter to vulnerability is soil type. To prevent soils from contamination, specific measures were proposed involving minimization of land use conflicts that would presumably raise the soil's organic matter and in the sequel restore the soil's structural functions. Additionally, the present study proposed the preservation and reinforcement of riparian forests as one measure to protect the quality of surface water. - Highlights: • A multi criteria analog model was developed to assess rural catchment vulnerability along roads. • Model parameters were defined by analogy with urban wash-off equations and routing algorithms. • The model mixes up various biophysical and socio-economic parameters. • Model application was based on a scenario analysis. • The study is focused on the Environmental Protection Area of Uberaba River, Brazil.

54 ENVIRONMENTAL SCIENCES↗

Energy savings and life cycle cost analysis of advanced double skin facade system applied to old apartments in South Korea

South Korea is one of the most densely populated countries in the world, and the population density in urban areas is much higher among others. Apartments are the most common form of residential buildings due to their high population density. More than 60% of domestic residential buildings are apartments, with more than 10 million households. The high population density is a problem that has long plagued South Korea because more than 45% of apartments are old apartments that are more than 20 years old. Old apartment buildings have low thermal performance that results in lots of energy consumption. Balconies, which worked as a thermal buffer, are also being removed by residents to expand indoor space. According to the green remodeling project supported by the Korean government, the typical retrofitting method is replacing external windows with the high-efficiency window in old apartments in South Korea. Here, this paper proposes a retrofitting method using an extended double-skin façade (DSF) system that replaces exterior windows and acts as a thermal buffer. The simulation model is developed with the EnergyPlus simulation program to conduct energy performance analyses. The simulation model has been calibrated using actual experimental data collected between October 1, 2019, and January 15, 2020. Results show that the cooling, heating, and lighting energy can be reduced up to 44.1% by fully utilizing electric energy generated by solar PV panels integrated with the DSF system. The payback period is about 15 years based on the energy price provided by the utility company. Although the payback period is long, it has great potential of energy savings and CO 2 emission reductions. The DSF system should be considered as a way of renovation, considering other factors such as increased real estate values and energy cost increases in the future.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Influence of plasma surface interactions on tokamak startup

The startup phase of a tokamak is a complex phenomenon involving burnthrough of the low-Z impurities and rampup of I{sub p}, the plasma current. The design considerations of a tokamak are closely connected with the startup modeling. Plasma evolution is analysed using a zero-dimensional model. The particle and energy balance is considered of two subclasses of plasmas which are penetrable by neutral gas, together with another component, neutrals trapped in the wall. The first subclass includes plasmas being penetrated by slow neutrals of (∼few eV) temperature. The second includes plasmas being penetrated only by fast neutrals having a temperature comparable to that of the ions. The impact of impurities on energy balance is considered through their generation by ion induced desorption of adsorbed oxygen on the first wall and physical and chemical sputtering of carbon. The paper demonstrates self-consistently that the evolution of initial phase of the discharge is intimately linked to the condition of the plasma facing components (PFCs) and the resultant plasma surface interactions.

36 MATERIALS SCIENCE↗

Electron energy distributions in the extended gas nebulae associated with high-z AGN: Maxwell–Boltzmann versus κ distributions

ABSTRACT Emission line observations together with photoionization models provide important information about the ionization mechanisms, densities, temperatures, and metallicities in active galactic nuclei (AGN)-ionized gas. Photoionization models usually assume Maxwell–Boltzmann (M–B) electron energy distributions (EED), but it has been suggested that using κ distributions may be more appropriate and could potentially solve the discrepancies in temperatures and abundances found in HII regions and planetary nebulae. We consider the impact of the presence of κ distributions in photoionized nebulae associated with AGN and study how this might affect spectral modelling and abundance analyses for such regions. Using the photoionization code MAPPINGS 1e, we compute models adopting M–B and κ distributions of electron energies and compare the behaviour of emission line ratios for different values of κ, gas metallicity, density, ionization parameter, and SED slope. We find that the choice of EED can have a large impact on some UV and optical emission lines emitted by photoionized nebulae associated with AGN, and that the impact of adopting a κ distribution is strongly dependent on gas metallicity and ionization parameter. We compile a sample of line ratios for 143 type 2 AGN and compare our models against the observed line ratios. We find that for 98 objects, κ distributions provide a better fit to the observed line ratios than M–B distributions. In addition, we find that adopting κ-distributed electron energies results in significant changes in the inferred gas metallicity and ionization parameter in a significant fraction of objects.

Morais, S. G. (ORCID:0000000200927813)↗

The verification and uncertainty quantification of surrogate models used for structural analysis

High fidelity modeling of complex systems can require large finite element models to capture the physics of interest. Typically these high-order models take an excessively long time to run. For important studies such as model validation and uncertainty quantification, where probabilistic measures of the response are required, a large number of simulations of the high fidelity model with different parameters are necessary. In addition, some environments, such as an extensive random vibration excitation, require a long simulation time to capture the entire event. A process that produces a highly efficient model from the original high order model is necessary to enable these analyses. These highly efficient models are referred to as surrogate models, for their purpose is to represent the main physics that is of importance, but decrease the computational burden. A critical aspect of any surrogate model is how faithfully the efficient model represents the original high-order model. This paper describes the process for verifying a surrogate model using response quantities of interest and quantifying the introduced uncertainties in the use of the surrogate model. This is done to help any analyst if they use any surrogate model; such has, Craig-Bampton Reduc tions, POD, etc.

Ross, Michael↗

Mathematical and Numerical Analyses of Peridynamics for Multiscale Materials Modeling

We have treated the modeling, analysis, numerical analysis, and algorithmic development for nonlocal models of diffusion and mechanics. Variational formulations were developed and finite element methods were developed based on those formulations for both steady state and time dependent problems. Obstacle problems and optimization problems for the nonlocal models were also treated and connections made with fractional derivative models.

97 MATHEMATICS AND COMPUTING↗

An Analytical Model for Capturing the Decline of Fracture Conductivity in the Tuscaloosa Marine Shale Trend from Production Data

Fracture conductivity decline is a concern in the Tuscaloosa Marine Shale (TMS) wells due to the high content of clay in the shale. An analytical well productivity model was developed in this study considering the pressure-dependent conductivity of hydraulic fractures. The log-log diagnostic approach was used to identify the boundary-dominated flow regime rather than the linear flow regime. Case studies of seven TMS wells indicated that the proposed model allows approximation of the field data with good accuracy. Production data analyses with the model revealed that the pressure-dependent fracture conductivity in the TMS in the Mississippi section declines following a logarithmic mode, with dimensionless coefficient χ varying between 0.116 and 0.130. The pressure-dependent decline of fracture conductivity in the transient flow period is more significant than that in the boundary-dominated flow period.

58 GEOSCIENCES↗

Transonic flutter and gust-response tests and analyses of a wind-tunnel model of a torsion free wing airplane

An exploratory study of a 1/5.5 size, complete airplane version of a torsion free wing (TFW) fighter aircraft was conducted. The TFW consisted of a wing/boom/canard assembly on each fuselage side that was interconnected by a common pivot shaft so that the TFW could rotate freely in pitch. The effect of the TFW was evaluated by comparing data obtained with the TFW free and the TFW locked to the fuselage. With the model mounted on cables to simulate an airplane free flying condition, flutter boundaries were measured at Mach number (M) from 0.85 to 1.0 and gust responses at M = 0.65 and 0.90. The critical flutter mode for the TFW free configuration was found experimentally to occur at M = 0.95 and had the rigid TFW pitch mode as its apparent aerodynamic driver.

Ruhlin, C. L.↗

Transonic flutter and gust-response tests and analyses of a wind-tunnel model of a torsion-free-wing fighter airplane

The paper reports the results of analytical and exploratory wind-tunnel studies of the transonic flutter and gust response characteristics of a 1/5.5-size complete-airplane version of a torsion-free-wing (TFW) fighter aircraft. The critical flutter mode for the TFW-free configuration was found to occur at M = 0.95 and had the rigid-TFW pitch mode as its apparent aerodynamic driver. However, the minimum dynamic flutter for the TFW-free case was only about 20% lower than for the TFW-locked; therefore the present TFW is a viable design concept with respect to flutter. The present TFW was not effective as a gust alleviator.

Ruhlin, C. L.↗

Mesoscale research activities with the LAMPS model

Researchers achieved full implementation of the LAMPS mesoscale model on the Atmospheric Sciences Division computer and derived balanced and real wind initial states for three case studies: March 6, April 24, April 26, 1982. Numerical simulations were performed for three separate studies: (1) a satellite moisture data impact study using Vertical Atmospheric Sounder (VAS) precipitable water as a constraint on model initial state moisture analyses; (2) an evaluation of mesoscale model precipitation simulation accuracy with and without convective parameterization; and (3) the sensitivity of model precipitation to mesoscale detail of moisture and vertical motion in an initial state.

Kalb, M. W.↗

An approach for increasing aeroelastic divergence dynamic pressure of wind-tunnel models

An approach for increasing the aeroelastic divergence dynamic pressure of wind-tunnel model support systems is presented. A study has been conducted to investigate the effect of increased flexibility of the forward portion of balances on the divergence pressure of wind-tunnel models. The study utilized prior divergence analyses completed for various models to be tested in NASA Langley Research Center's National Transonic Facility, the Engineering Analysis Language finite-element analysis code, and an in-house computer program which solves for divergence dynamic pressure utilizing a transfer-matrix method based on fourth-order Runge-Kutta integration. Analytical results for balance flexibility changes versus changes in divergence pressure were obtained and demonstrate that a significant increase in divergence pressure can be obtained from the increased flexibility of the balance's forward portion for many models and their support systems.

Edwards, R. W.↗

An accurate nonlinear finite element analysis and test correlation of a stiffened composite wing panel

State-of-the-art nonlinear finite element analysis techniques are evaluated by applying them to a realistic aircraft structural component. A wing panel from the V-22 tiltrotor aircraft is chosen because it is a typical modern aircraft structural component for which there is experimental data for comparison of results. From blueprints and drawings, a very detailed finite element model containing 2284 9-node Assumed Natural-Coordinate Strain elements was generated. A novel solution strategy which accounts for geometric nonlinearity through the use of corotating element reference frames and nonlinear strain-displacement relations is used to analyze this detailed model. Results from linear analyses using the same finite element model are presented in order to illustrate the advantages and costs of the nonlinear analysis as compared with the more traditional linear analysis.

Davis, D. D., Jr.↗

The 2006 Kennedy Space Center Range Reference Atmosphere Model Validation Study and Sensitivity Analysis to the Performance of the National Aeronautics and Space Administration's Space Shuttle Vehicle

The Kennedy Space Center (KSC) Range Reference Atmosphere (RRA) is a statistical model that summarizes wind and thermodynamic atmospheric variability from surface to 70 km. The National Aeronautics and Space Administration's (NASA) Space Shuttle program, which launches from KSC, utilizes the KSC RRA data to evaluate environmental constraints on various aspects of the vehicle during ascent. An update to the KSC RRA was recently completed. As part of the update, the Natural Environments Branch at NASA's Marshall Space Flight Center (MSFC) conducted a validation study and a comparison analysis to the existing KSC RRA database version 1983. Assessments to the Space Shuttle vehicle ascent profile characteristics were performed by JSC/Ascent Flight Design Division to determine impacts of the updated model to the vehicle performance. Details on the model updates and the vehicle sensitivity analyses with the update model are presented.

Burns, Lee↗

The 2006 Cape Canaveral Air Force Station Range Reference Atmosphere Model Validation Study and Sensitivity Analysis to the National Aeronautics and Space Administration's Space Shuttle

The 2006 Cape Canaveral Air Force Station (CCAFS) Range Reference Atmosphere (RRA) is a statistical model summarizing the wind and thermodynamic atmospheric variability from surface to 70 kin. Launches of the National Aeronautics and Space Administration's (NASA) Space Shuttle from Kennedy Space Center utilize CCAFS RRA data to evaluate environmental constraints on various aspects of the vehicle during ascent. An update to the CCAFS RRA was recently completed. As part of the update, a validation study on the 2006 version was conducted as well as a comparison analysis of the 2006 version to the existing CCAFS RRA database version 1983. Assessments to the Space Shuttle vehicle ascent profile characteristics were performed to determine impacts of the updated model to the vehicle performance. Details on the model updates and the vehicle sensitivity analyses with the update model are presented.

Burns, Lee↗