Search NASA⌕ Search

SEARCH · Search NASA

Results for “modelling studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Dynamics of stimulated L → H transitions

We report on model studies of stimulated L → H transitions [K. Miki et al., Phys. Rev. Lett. 110, 195002 (2013)]. These studies use a reduced mesoscale model. Model studies reveal that L → H transition can be triggered by particle injection into a subcritical state (i.e., P<P{sub Thresh}). Particle injection changes edge mean flow shear via changes of density and temperature gradients. The change of edge mean flow shear is critical to turbulence collapse and the subsequent stimulated transition. For low ambient heating, strong injection is predicted to trigger a transient turbulence collapse. Repetitive injection at a period less than the lifetime of the collapsed state can thus maintain the turbulence collapse and so sustain a driven H-mode-like state. The total number of particles required to induce a transition by either injection or gas puffing is estimated. Results indicate that the total number of injected particles required is much smaller than that required for a transition by gas puffing. We thus show that internal injection is more efficient than gas puffing of comparable strength. We also observe that zonal flows do not play a critical role in stimulated transitions. For spontaneous transitions, the spike of the Reynolds work of turbulence on the zonal flow precedes the spike in the mean electric field shear. In contrast, we show that the two are coincident for stimulated transitions, suggesting that there is no causal link between zonal and mean flows for stimulated transitions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical Studies of model binary miscibility gap system

In order to develop a better understanding of separation processes in binary miscibility gap metal alloys, model transparent fluid systems were studied. The system selected was diethylene glycol-ethyl salicylate which has convenient working temperatures (288 to 350 K), low toxicity, and is relatively easy to purify. The system is well characterized with respect to its phase diagram, density, surface and interfacial tensions, viscosity and other pertinent physical properties. Studies of migration of the dispersed phase in a thermal gradient were performed using conventional photomicroscopy. Velocities of the droplets of the dispersed phase were measured and compared to calculated rates which included both Stokes and thermal components. A holographic microscopy system was used to study growth, coalescence, and particle motions. Sequential holograms allowed determination of particle size distribution changes with respect to time and temperature. Holographic microscopy is capable of recording particle densities up to 10 to the 7th power particles/cu cm and is able to resolve particles of the order of 2 to 3 microns in diameter throughout the entire volume of the test cell. The reconstructed hologram produces a wavefront that is identical to the original wavefront as it existed when the hologram was made. The reconstructed wavefront is analyzed using a variety of conventional optical methods.

Lacy, L. L.↗

A Micromechanics Finite Element Model for Studying the Mechanical Behavior of Spray-On Foam Insulation (SOFI)

A micromechanics model has been constructed to study the mechanical behavior of spray-on foam insulation (SOFI) for the external tank. The model was constructed using finite elements representing the fundamental repeating unit of the SOFI microstructure. The details of the micromechanics model were based on cell observations and measured average cell dimensions discerned from photomicrographs. The unit cell model is an elongated Kelvin model (fourteen-sided polyhedron with 8 hexagonal and six quadrilateral faces), which will pack to a 100% density. The cell faces and cell edges are modeled using three-dimensional 20-node brick elements. Only one-eighth of the cell is modeled due to symmetry. By exercising the model and correlating the results with the macro-mechanical foam behavior obtained through material characterization testing, the intrinsic stiffness and Poisson s Ratio of the polymeric cell walls and edges are determined as a function of temperature. The model is then exercised to study the unique and complex temperature-dependent mechanical behavior as well as the fracture initiation and propagation at the microscopic unit cell level.

Ghosn, Louis J.↗

Optimization of the Reax force field for the lithium–oxygen system using a high fidelity charge model

Studies using molecular dynamics (MD) have long struggled to simulate the failure modes of materials, predicting unrealistically high ductility and failing to capture brittle fracture. The primary cause of this shortcoming is an inadequate description of bond breaking. While reactive force fields such as ReaxFF show improvements compared to traditional force fields, the charge models used yield unphysical partial charges, especially during dissociation of ionic bonds. This flaw may be remedied by using the atom-condensed Kohn–Sham density functional theory (DFT) approximated to a second order (ACKS2) charge model for determining partial charges. In this work, we present a new ACKS2-enabled Reax force field for fracture simulations of lithium oxide systems, which was obtained by training against an extensive set of DFT, multireference configuration interaction (MRCI), and MRCI+Q reference data using genetic optimization techniques. This new force field significantly improves the bond breaking behavior, but still cannot fully capture the brittle fracture in MD simulations, suggesting more research is needed to improve simulation of brittle fracture.

36 MATERIALS SCIENCE↗

Improving Simulation of Irrigation in a Global Land Surface Model

Studies have shown that irrigated agriculture has substantial effects on local to regional hydrologic and atmospheric processes. These effects include increased evapotranspiration and near surface humidity, decreased air and ground temperature, augmented downwind precipitation, enhanced recharge, depletion of source water stocks, and overall changes to the regional water budget. However, developers of global offline and coupled modeling systems have been slow to incorporate irrigation. This presentation will describe progress towards simulating irrigation worldwide in the Land Information System (LIS) and Global Land Data Assimilation System (GLDAS). We have developed and refined the ability to simulate sprinkler irrigation, furrow irrigation, paddy irrigation, and drip irrigation. We have reconciled multiple global and national irrigation, land cover, and crop type databases in an effort to (1) distinguish irrigated and rainfed agriculture, (2) simulate the proper distribution of crops (as sub-grid tiles) in each model grid pixel, and (3) apply the most likely irrigation method in each tile based on the crop type and country or state level information on the relative usage of sprinkler, flood, and drip irrigation. Using agricultural water withdrawal data, as available, for calibration and evaluation, we show that the implemented approach is promising but that much fine tuning remains to be done. In particular, irrigation model parameters that produce good results in one location often produce less satisfying results in others.

Matthew Rodell↗

In-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in bearing steels

This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained austenite in bearing steels can significantly affect the macro-mechanical and micro-mechanical material response. Mechanical characterization of metastable austenite is a critical component in accurately capturing the micro-mechanical behavior under typical application loads. Traditional mechanical characterization techniques are unable to discretely quantify the micro-mechanical response of the austenite, and as a result, the computational predictions rely heavily on trial and error or qualitative descriptions of the austenite phase. In order to overcome this, in the present work, we use in-situ neutron diffraction of a uniaxial tension test of an A485 Grade 1 bearing steel specimen. The mechanical response determined from the neutron diffraction analysis was incorporated into a hybrid crystal plasticity finite element model that accounts for the martensite's crystal plasticity and the stress-assisted transformation from austenite to martensite in bearing steels. Here, the modeling response was used to estimate the single crystal elastic constants of the austenite and martensite phases. Finally, the results show that using in-situ neutron diffraction, coupled with a crystal plasticity model, can successfully predict both the micro-mechanical and macro-mechanical responses of bearing steels while accounting for the martensitic transformation of the retained austenite.

36 MATERIALS SCIENCE↗

A Model Intercomparison Study to Investigate Mixing Characteristics in Non‐Precipitating Stratocumulus Clouds

Recent aircraft observations of marine stratocumulus clouds consistently showed that cloud microphysical relationships vary with altitude, indicating inhomogeneous mixing characteristics near cloud top and homogeneous mixing characteristics in mid-levels of clouds. Here, we conduct model intercomparison of an idealized, non-precipitating stratocumulus cloud to evaluate model consistency and examine whether simulations can reproduce the observed mixing characteristics. The results show that eleven large-eddy simulations with various dynamics and microphysics schemes show good agreement on the thermodynamical, microphysical, and dynamical properties of the stratocumulus-topped boundary layer in a steady state. The inter-model spread in steady-state liquid water path is significantly reduced compared to previous model intercomparison studies. This improvement might be due to better models and more consistent initial conditions than those used decades ago. In addition, most simulations, including a low-dimensional simulation, capture inhomogeneous mixing characteristics near the cloud top and homogeneous mixing characteristics inside the cloud. Moreover, simulations using Lagrangian microphysics schemes agree better with the observed mixing characteristics compared with those using the bin microphysics schemes. Since most simulations do not fully resolve the entrainment process, the apparent mixing characteristics arise from the variations in the resolved cloud properties. Our results support the vertical circulation mixing hypothesis, which suggests that homogeneous mixing characteristics in mid-levels of clouds are due to the vertical circulation of entrainment-affected and diluted parcels from the cloud top moved to lower levels.

54 ENVIRONMENTAL SCIENCES↗

New results in fault latency modelling

Studies carried out by McGough and Swern (1981, 1983) are summarized. In these studies, an avionics processor was simulated and a series of fault injection experiments was carried out to determine the degree of fault latency in a redundant flight control system that employed comparison monitoring as the exclusive means of failure detection. A determination was also made of the fault coverage of a typical self-test program. The summary presented stresses that a self-test program should be designed to capitalize on the hardware mechanization of the processor. If this is not done, subtests tend to repeatedly exercise the same hardware components while neglecting to exercise a substantial proportion of the remainder. It is also pointed out that fault latency is relatively independent of both the length and instruction mix of a program. A significant difference is found in fault coverage assessed using pin-level and gate-level fault models.

Mcgough, J. G.↗

Modeling mechanical behavior of an additively manufactured metal structure with local texture variations: a study on model form error

Here, the repetitive rapid solidification that occurs in metal additive manufacturing (AM) processes creates microstructures distinctly different from wrought materials. Local variability in AM microstructures (either by design or unintentional) raises questions as to how AM structures should be modeled at the part-scale to minimize modeling error. The key goal of this work is to demonstrate a posteriori error estimation applied to an AM part. It is assumed that the actual microstructure is unknown and an approximate, spatially uniform material model is used. Error bounds are calculated for many reference models based on AM microstructures with elongated grain morphology and localized or global fiber textures during a post-processing step. The current findings promote confidence that a posteriori model form error estimation could be used effectively in mechanical performance simulations of AM parts to quickly obtain quantitative error metrics between an approximate model result and many microstructure-based reference models. The a posteriori error estimation introduces significant time savings compared to computing the full reference model solutions. Tight bounds on model form error are obtained when texture variations in the reference models occur on large length scales. For materials with property variation at small length scales, multi-scale error estimation techniques are needed to properly account for the many interfaces present between areas with different properties.

36 MATERIALS SCIENCE↗

Some results from 1/8-scale Shuttle model vibration studies

Highlights of experimental and analytical vibration studies of a 1/8-scale structural dynamic model of the Space Shuttle are presented. The Space Shuttle is a launch vehicle with elements assembled in an asymmetric manner. Responses of the assembled vehicle are characterized by directional coupling and high modal density at low frequencies. Effects of distortion of structure near element interfaces are shown to be significant and predictable with highly detailed mathematical models. Acquisition of modal data by single-point random excitation is shown to be viable for these complex structures. Element studies reveal large liquid-structure interactions and a wide range of structural damping.

Pinson, L. D.↗

Premixing quality and flame stability: A theoretical and experimental study

Models for predicting flame ignition and blowout in a combustor primary zone are presented. A correlation for the blowoff velocity of premixed turbulent flames is developed using the basic quantities of turbulent flow, and the laminar flame speed. A statistical model employing a Monte Carlo calculation procedure is developed to account for nonuniformities in a combustor primary zone. An overall kinetic rate equation is used to describe the fuel oxidation process. The model is used to predict the lean ignition and blow out limits of premixed turbulent flames; the effects of mixture nonuniformity on the lean ignition limit are explored using an assumed distribution of fuel-air ratios. Data on the effects of variations in inlet temperature, reference velocity and mixture uniformity on the lean ignition and blowout limits of gaseous propane-air flames are presented.

Radhakrishnan, K.↗

A new rat model for studies of hypokinesia and antiorthostasis

A new rat model (suspension and immobilization) is described for induction of hypokinesia and orthostatic manipulations. Hypokinetic responses were comparable to those in prolonged bed rest and weightlessness in humans, body or limb casted and small cage restrained animals. Responses to antiorthostasis (15 to 20 deg head down tilt) in rats were similar to those in neutral bouyancy tests in humans and animals and to those in prolonged bed rest in humans. During seven days of hypokinesia there was an atrophy of the gastrocnemius and increased excretion of urinary nitrogeneous end products. The antiorthostatic (AOH) 15 to 20 deg head down tilt resulted in diuresis, natriuresis and kaliuresis. No comparable responses were observed in orthostatic hypokinetic (OH) rats. Readaptation from AOH and OH occurred during one week recovery in metabolic cage conditions.

Musacchia, X. J.↗

Regional and Global Climate Response to Anthropogenic SO2 Emissions from China in Three Climate Models

We use the HadGEM3-GA4, CESM1, and GISS ModelE2 climate models to investigate the global and regional aerosol burden, radiative flux, and surface temperature responses to removing anthropogenic sulfur dioxide (SO2) emissions from China. We find that the models differ by up to a factor of 6 in the simulated change in aerosol optical depth (AOD) and shortwave radiative flux over China that results from reduced sulfate aerosol, leading to a large range of magnitudes in the regional and global temperature responses. Two of the three models simulate a near-ubiquitous hemispheric warming due to the regional SO2 removal, with similarities in the local and remote pattern of response, but overall with a substantially different magnitude. The third model simulates almost no significant temperature response. We attribute the discrepancies in the response to a combination of substantial differences in the chemical conversion of SO2 to sulfate, translation of sulfate mass into AOD, cloud radiative interactions, and differences in the radiative forcing efficiency of sulfate aerosol in the models. The model with the strongest response (HadGEM3-GA4) compares best with observations of AOD regionally, however the other two models compare similarly (albeit poorly) and still disagree substantially in their simulated climate response, indicating that total AOD observations are far from sufficient to determine which model response is more plausible. Our results highlight that there remains a large uncertainty in the representation of both aerosol chemistry as well as direct and indirect aerosol radiative effects in current climate models, and reinforces that caution must be applied when interpreting the results of modelling studies of aerosol influences on climate. Model studies that implicate aerosols in climate responses should ideally explore a range of radiative forcing strengths representative of this uncertainty, in addition to thoroughly evaluating the models used against observations.

sulfates↗

Fibroblast spheroids as a model to study sustained fibroblast quiescence and their crosstalk with tumor cells

Stromal fibroblasts have an important role in regulating tumor progression. Normal and quiescent fibroblasts have been shown to restrict and control cancer cell growth, while cancer-associated, i. e. activated fibroblasts have been shown to enhance proliferation and metastasis of cancer cells. In this study we describe generation of quiescent fibroblasts in multicellular spheroids and their effects on squamous cell carcinoma (SCC) growth in soft-agarose and xenograft models. Quiescent phenotype of fibroblasts was determined by global down-regulation of expression of genes related to cell cycle and increased expression of p27. Interestingly, microarray analysis showed that fibroblast quiescence was associated with similar secretory phenotype as seen in senescence and they expressed senescence-associated-β-galactosidase. Quiescent fibroblasts spheroids also restricted the growth of RT3 SCC cells both in soft-agarose and xenograft models unlike proliferating fibroblasts. Restricted tumor growth was associated with marginally increased tumor cell senescence and cellular differentiation, showed with senescence-associated-β-galactosidase and cytokeratin 7 staining. Our results show that the fibroblasts spheroids can be used as a model to study cellular quiescence and their effects on cancer cell progression. - Highlights: • Fibroblasts acquire a sustained quiescence when grown as multicellular spheroids. • This quiescence is associated with drastic change in gene expression. • Fibroblasts spheroids secrete various inflammation-linked cytokines and chemokines. • Fibroblasts spheroids reduced growth of RT3 SCC cells in xenograft model.

60 APPLIED LIFE SCIENCES↗