Search NASA⌕ Search

SEARCH · Search NASA

Results for “operating experience data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Antarctic Iceberg Tracking Based on Time Series of Aqua AMSRE Microwave Brightness Temperature Measurements

Observations of icebergs are identified as one of the requirements for the GEOSS (Global Earth Observation System of Systems) in the area of reducing loss of life and property from natural and human-induced disasters. However, iceberg observations are not included among targets in the GEOSS 10-Year Implementation Plan, and thus there is an unfulfilled need for iceberg detection and tracking in the near future. Large Antarctic icebergs have been tracked by the National Ice Center and by the academic community using a variety of satellite sensors including both passive and active microwave imagers, such as SSM/I (Special Sensor Microwave/Imager) deployed on the DMSP (Defense Meteorological Satellite Program) spacecraft. Improvements provided in recent years by NASA and non-NASA satellite radars, scatterometers, and radiometers resulted in an increased number of observed icebergs and even prompted a question: Is The Number of Antarctic Icebergs Really Increasing? [D.G. Long, J. Ballantyne, and C. Bertoia, Eos, Transactions of the American Geophysical Union 83 (42): 469 & 474, 15 October 2002]. AMSR-E (Advanced Microwave Scanning Radiometer for the Earth Observing System) represents an improvement over SSM/I, its predecessor. AMSR-E has more measurement channels and higher spatial resolution than SSM/I. For example, the instantaneous field of view of the AMSR-E s 89-GHz channels is 6 km by 4 km versus 16 km by 14 km for SSM/I s comparable 85-GHz channels. AMSR-E, deployed on the Aqua satellite, scans across a 1450-km swath and provides brightness temperature measurements with nearglobal coverage every one or two days. In polar regions, overlapping swaths generate coverage up to multiple times per day and allow for creation of image time series with high temporal resolution. Despite these advantages, only incidental usage of AMSR-E data for iceberg tracking has been reported so far, none in an operational environment. Therefore, an experiment was undertaken in the RPC (Rapid Prototyping Capability) of NASA s (National Aeronautics and Space Administration) Applied Science Program to demonstrate that passive microwave brightness temperature measurements acquired by AMSR-E can be effectively used to track iceberg movement around Antarctica. The RPC s robust computation environment enabled processing of terabytes of data products available from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center. Iceberg tracking based on the AMSR-E Level 2A data product was compared with records from the National Ice Center for currently existing icebergs. Some icebergs as small as roughly 10 km in size were easily observed, but tracking of many others, even larger ones, was obscured by presence of sea ice surrounding the icebergs. The best results, such as for the large iceberg A22A, were achieved when an iceberg was in open ocean.

Blonski, Slawomir↗

Advancing Autonomy in Distributed Space Systems: Insights From on-Orbit Testing with the Starling 1.0 Mission

Autonomous decision-making is crucial for enhancing mission effectiveness in Distributed Space Systems (DSS), particularly in multi-spacecraft operations where communication constraints and mission complexity pose challenges. The Distributed Spacecraft Autonomy (DSA) team at NASA’s Ames Research Center is advancing autonomy in DSS through five key technical areas: distributed resource and task management, reactive operations, system modeling and simulation, human-swarm interaction, and ad hoc network communications. The DSA experiment onboard the Starling 1.0 Mission showcases collaborative resource allocation for multi-point science data collection with four small spacecraft. Autonomy in decision-making is highlighted as a crucial factor for multi-spacecraft missions, enabling spacecraft to operate independently, reducing reliance on ground control. This capability is particularly significant for future deep-space missions, where communication delays and limited data transmission capacity make traditional command and control approaches impractical. This demonstration focuses on a GPS Channel Selection Experiment, leveraging emergent capabilities like "shared sampling" and "simultaneous sampling" to optimize channel selection across the spacecraft swarm. The experiment aims to capture ionospheric phenomena such as the Equatorial Ionization Anomaly and Polar Patches. The DSA system's autonomous reconfiguration ability is showcased, emphasizing its adaptability to natural phenomena without significant integration efforts. The GPS Channel Selection Experiment utilizes a dual-band GPS receiver to estimate plasma density in the ionosphere. Explorative and exploitative channel selections are employed based on the nature of observed phenomena. The performance of DSA algorithms is evaluated in terms of optimal channel allocations and responsiveness to changes in observed features. The DSA Flight Software utilizes the Core Flight System (cFS) framework, ensuring compatibility with the Starling 1.0 flight mission software. DSA showcases results from RTI’s Connext DDS Micro communication middleware, enabling message routing over the Ad-Hoc Network of Starling 1.0. This paper provides a comprehensive overview of the DSA experiment's initial results, emphasizing the advancements in autonomy for Distributed Space Systems and the successful collaboration with the Starling 1.0 mission.

Caleb Ashmore Adams↗

Metallography and fuel cladding chemical interaction in fast flux test facility irradiated metallic U-10Zr MFF-3 and MFF-5 fuel pins

Abstract The Mechanistic Fuel Failure (MFF) series of metal fuel irradiations conducted in the Fast Flux Test Facility (FFTF) provides an important potential comparison between data generated in the Experimental Breeder Reactor (EBR-II) and that expected in a larger-scale fast reactor. The irradiations were the beginning tests to qualify U-10wt%Zr as a driver fuel for FFTF. The FFTF core, with a 91.4 cm tall fuel column and a chopped cosine neutron flux profile, operated with a peak cladding temperature at the top of the fuel column, but developed peak burnup at the centerline of the core. This places the peak fuel temperature midway between the core center and the top of fuel, lower in the fuel column than in previous EBR-II experiments that had a 32-cm height core. The MFF-3 and MFF-5 qualification assemblies operated in FFTF to >10 at% burnup, and performed very well with no cladding breaches. The MFF-3 assembly operated to 13.8 at% burnup with a peak inner cladding temperature of 643°C, and the MFF-5 assembly operated to 10.1 at% burnup with a peak inner cladding temperature of 651°C. Because of the very high operating temperatures for both the fuel and the cladding, data from the MFF assemblies are most comparable to the data obtained from the EBR-II X447 experiment, which experienced two pin breaches. The X447 breaches were strongly influenced by a large amount of fuel/cladding chemical interaction (FCCI). The MFF pins benefitted from different axial locations of high burnup and peak cladding temperature, which helped to reduce interdiffusion between rare earth fission products and stainless steel cladding. Post-irradiation examination evidence illustrates this advantage. Comparing other performance data of the long MFF pins to prior EBR-II test data, the MFF fuel inside the cladding grew less axially, and the gas release data did not reveal a definitive difference.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Validation of Numerical Tools for Calculating Reactivity Feedback in Sodium Fast Reactors Using SEFOR Experimental Data

The Southwest Experimental Fast Oxide Reactor (SEFOR) was an experimental sodium-cooled fast breeder reactor operated from 1969 to 1972 with experiments designed to measure Doppler reactivity feedback in a wide temperature range from around 350 °F to temperatures approaching the melting point of mixed oxide fuel of around 5000 °F, providing valuable data for code validations. Co-supported by the Department of Energy (DOE) Fast Reactor Program (FRP) and the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the SEFOR benchmark project focused on using the experimental data to validate numerical tools that are used in industry and academia to design and license sodium-cooled fast reactors (SFRs). By the end of FY-25, substantial progress was achieved in the SEFOR benchmark study. A variety of numerical tools commonly used for modeling SFRs were applied to develop models for SEFOR core configurations I-D, I-E, I-I, and I-J. These included Monte Carlo codes such as MCNP, Serpent, and Shift; deterministic codes such as the legacy Argonne Reactor Computation (ARC) suite and the high-fidelity NEAMS code Griffin; and the system analysis code SAS4A/SASSYS-1 (SAS). Using these models, both SEFOR zero-power experiments and power-ascending tests were successfully simulated. Comparisons were performed against experimental measurements of core criticalities, reflector worth, kinetics parameters (Λ/βeff), isothermal reactivity feedback (from 350 °F to 760 °F at zero power), and power-ascending reactivity feedback (as power increased from 0.4 MW to 17 MW). In general, these comparisons demonstrated very good agreement between numerical results and experimental data. In Fiscal Year 26 (FY-26), the SEFOR benchmark project will continue to address the modeling issues identified in FY-25. Effort will focus on the simulation of reactivity insertion transients in SEFOR core II using the ARC/SAS model. Future work will also focus on incorporating BISON into the SEFOR core modeling process to enable the first Multiphysics simulations of the isothermal tests based on the MOOSE framework.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A large-scale benchmarking of deterministic and stochastic derivative-free optimization algorithms

This presentation summarizes our work in the PrOMMiS project on benchmarking of data-driven optimization algorithms and their applications in self-driving laboratories. This work supports the broader project goal of accelerating the identification of promising separation methods and operating conditions for critical minerals separation processes. We present a systematic benchmarking study of 42 data-driven optimization algorithms on a broad collection of 502 test problems. The results identify BAM, GLCCLUSTER, and MULTIMIN as the most effective optimization solvers, with BAM showing the highest overall performance and solving more than 80% of the benchmark problems. The study also shows that no single solver consistently outperforms the others across all problem types, indicating that our future laboratory applications may benefit from using a small set of strong solvers rather than relying on a single method. The presentation also illustrates an in-silico chemical reactor case study showing that data-driven optimization methods can guide autonomous experimentation in a self-driving laboratory and identify optimal operating conditions within a small number of experiments. Overall, the results provide a basis for selecting efficient optimization methods and demonstrate the practical use of data-driven optimization in self-driving laboratory workflows.

36 MATERIALS SCIENCE↗

Algorithm-guided experimentation for autonomous AI systems in self-driving laboratories

This presentation summarizes our work in the PrOMMiS project on benchmarking of data-driven optimization algorithms and their applications in self-driving laboratories. This work supports the broader project goal of accelerating the identification of promising separation methods and operating conditions for critical minerals separation processes. We present a systematic benchmarking study of 42 data-driven optimization algorithms on a broad collection of 502 test problems. The results identify BAM, GLCCLUSTER, and MULTIMIN as the most effective optimization solvers, with BAM showing the highest overall performance and solving more than 80% of the benchmark problems. The study also shows that no single solver consistently outperforms the others across all problem types, indicating that our future laboratory applications may benefit from using a small set of strong solvers rather than relying on a single method. The presentation also illustrates an in-silico chemical reactor case study showing that data-driven optimization methods can guide autonomous experimentation in a self-driving laboratory and identify optimal operating conditions within a small number of experiments. Overall, the results provide a basis for selecting efficient optimization methods and demonstrate the practical use of data-driven optimization in self-driving laboratory workflows.

36 MATERIALS SCIENCE↗

Autonomous Satellite Command and Control Through the World Wide Web

The Automated Space System Experimental Testbed (ASSET) system is a simple yet comprehensive real-world operations network being developed. Phase 3 of the ASSET Project was January-December 1997 and is the subject of this report. This phase permitted SSDL and its project partners to expand the ASSET system in a variety of ways. These added capabilities included the advancement of ground station capabilities, the adaptation of spacecraft on-board software, and the expansion of capabilities of the ASSET management algorithms. Specific goals of Phase 3 were: (1) Extend Web-based goal-level commanding for both the payload PI and the spacecraft engineer. (2) Support prioritized handling of multiple (PIs) Principle Investigators as well as associated payload experimenters. (3) Expand the number and types of experiments supported by the ASSET system and its associated spacecraft. (4) Implement more advanced resource management, modeling and fault management capabilities that integrate the space and ground segments of the space system hardware. (5) Implement a beacon monitoring test. (6) Implement an experimental blackboard controller for space system management. (7) Further define typical ground station developments required for Internet-based remote control and for full system automation of the PI-to-spacecraft link. Each of those goals are examined. Significant sections of this report were also published as a conference paper. Several publications produced in support of this grant are included as attachments. Titles include: 1) Experimental Initiatives in Space System Operations; 2) The ASSET Client Interface: Balancing High Level Specification with Low Level Control; 3) Specifying Spacecraft Operations At The Product/Service Level; 4) The Design of a Highly Configurable, Reusable Operating System for Testbed Satellites; 5) Automated Health Operations For The Sapphire Spacecraft; 6) Engineering Data Summaries for Space Missions; and 7) Experiments In Automated Health Assessment And Notification For The Sapphire Microsatellite.

Cantwell, Brian↗

Ignition regimes in rapid compression machines

A rapid compression machine is an experimental apparatus used to study ignition chemistry at conditions that are relevant to internal combustion engines and gas turbines. However, due to the operating characteristics of these devices, heat transfer effects and inhomogeneous ignition events can be encountered. Hence, this paper develops a combustion regime diagram, which incorporates these effects in order to better understand physical in uences on the measurements. This diagram employs familiar Damkohler number and Reynolds number scaling, and seeks to provide an operational guide for rapid compression machine experiments. This diagram is compared to experimental data and good agreement is found.

Heat transfer↗

Predissociation and dissociative ionization of Rydberg states of Xe{sub 2} and the photodissociation of Xe{sub 2}{sup +}.

The Rydberg states of Xe{sub 2} in the region between 76,,000 and 84,000 cm{sup -1} were studied by using a combination of two-photon excitation and velocity map ion imaging. The electronic states in this region are based on the Xe({sup 1}S{sub 0})+Xe 6p and 5d dissociation limits, and the large number of states leads to numerous curve crossings and distorted potentials. These Rydberg states can decay by predissociation or fluorescence or can be photoionized, dissociatively photoionized, or photodissociated by the absorption of a single additional photon. Furthermore, the molecular ion can be photodissociated as well. While numerous other techniques have been applied to this problem, velocity map ion imaging provides a high resolution approach to determine the operative processes. When combined with existing data obtained by other methods, the present experiments allow a more complete understanding of the assignment and behavior of these states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design of Bench-Scale Silicone Process for Low-Cost CO 2 Capture

The major goal of the project is to design and optimize a bench-scale process for novel silicone CO 2 -capture solvents and establish scalability and potential for commercialization of post-combustion capture of CO 2 from coal-fired power plants. This system should be capable of 90% capture efficiency and demonstrate that less than 35% increase in the cost of energy services can be achieved upon scale-up. Experiments were conducted to obtain data required for design of the major unit operations. The bench-scale system design has been completed, including sizing of major unit operations and the development of a detailed Process and Instrument Diagram (P&ID). The system has been designed to be able to operate over a wide range of process conditions so that the effect of various process variables on performance can be determined. To facilitate flexibility in operation, the absorption column has been designed in a modular manner, so that the height of the column can be varied. The desorber has also been designed to allow for a range of residence times, temperatures, and pressures. The system will be fabricated at Techniserv Inc.

20 FOSSIL-FUELED POWER PLANTS↗

Pebble Fuel Handling and Reactivity Control for Salt-Cooled High Temperature Reactors

This report documents the work completed on the X-PREX facility under NEUP Project 11- 3172. This project seeks to demonstrate the viability of pebble fuel handling and reactivity control for fluoride salt-cooled high-temperature reactors (FHRs). The research results also improve the understanding of pebble motion in helium-cooled reactors, as well as the general, fundamental understanding of low-velocity granular flows. Successful use of pebble fuels in with salt coolants would bring major benefits for high-temperature reactor technology. Pebble fuels enable on-line refueling and operation with low excess reactivity, and thus simpler reactivity control and improved fuel utilization. If fixed fuel designs are used, the power density of salt- cooled reactors is limited to 10 MW/m 3 to obtain adequate duration between refueling, but pebble fuels allow power densities in the range of 20 to 30 MW/m 3 . This can be compared to the typical modular helium reactor power density of 5 MW/m3. Pebble fuels also permit radial zoning in annular cores and use of thorium or graphite pebble blankets to reduce neutron fluences to outer radial reflectors and increase total power production. Combined with high power conversion efficiency, compact low-pressure primary and containment systems, and unique safety characteristics including very large thermal margins (>500°C) to fuel damage during transients and accidents, salt-cooled pebble fuel cores offer the potential to meet the major goals of the Advanced Reactor Concepts Development program to provide electricity at lower cost than light water reactors with improved safety and system performance.This report presents the facility description, experimental results, and supporting simulation methods of the new X-Ray Pebble Recirculation Experiment (X-PREX), which is now operational and being used to collect data on the behavior of slow dense granular flows relevant to pebble bed reactor core designs. The X-PREX facility uses novel digital x-ray tomography methods to track both the translational and rotational motion of spherical pebbles, which provides unique experimental results that can be used to validate discrete element method (DEM) simulations of pebble motion. The validation effort supported by the X-PREX facility provides a means to build confidence in analysis of pebble bed configuration and residence time distributions that impact the neutronics, thermal hydraulics, and safety analysis of pebble bed reactor cores. Experimental and DEM simulation results are reported for silo drainage, a classical problem in the granular flow literature, at several hopper angles. These studies include conventional converging and novel diverging geometries that provide additional flexibility in the design of pebble bed reactor cores. Excellent agreement is found between the X-PREX experimental and DEM simulation results. This report also includes results for additional studies relevant to the design and analysis of pebble bed reactor cores including the study of forces on shut down blades inserted directly into a packed bed and pebble flow in a cylindrical hopper that is representative of a small test reactor.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Flexible and Accessible 4D Subsurface Visualization Using a Web-Based Platform

4D subsurface visualization using a web platform can provide improved communication, education and outreach to non-experts and stakeholders. It allows for the improved understanding of complex relationships and interactions that occur in inaccessible locations of which many experimental testbeds exist in. The use of a web-based visualization tool lessens the cognitive impact further by reducing the need of specialized software. Users can define their own exploration of a 3D or 4D scene, adding and removing data as needed and are able to make informed decisions based on accurate model visualizations, while providing a collaborative tool that can be accessed on any platform using a browser window. The tool is also able to point to real time streams to display up-to-the-second data as an experiment is ongoing. This level of latency can also provide operators with essential information that can direct an experiment’s progress. Additionally, this tool can leverage augmented and virtual reality (AR, VR) capabilities of certain mobile devices and head-mounted displays, providing further engaging visualization possibilities.

Pratt, Martin J.↗

Operation and performance of a lunar laser ranging station

The Lunar Laser Ranging Experiment has been in continuous operation for about 4 years using the McDonald Observatory 2.7-m telescope. Occupying only a small percentage of the available telescope time, the system is now measuring 350 lunar ranges per year, each with an accuracy of from 10 to 15 cm. This article tabulates the observed signal strengths, the success ratios, and the major operating restrictions that have characterized the daily performance of the experiment. These empirical data can be used to optimize the design of such installations in the future.

Silverberg, E. C.↗

Cosmic X-ray observations with OSO-8

The GSFC Cosmic X-ray Spectroscopy experiment aboard OSO-8 has operated successfully since launch providing spectral and temporal data on X-ray sources in tha energy range 2-60 keV. Analysis of quick look data shows a variety of spectral features, some stable, others variable, which will increase understanding of the nature of individual sources. In particular, observed emission and absorption features that can be attributed to iron will result in abundance measures of this important element in sources such as some X-ray binaries, the supernova remnant Cas A, and the nucleus of the galaxy Cen A.

Serlemitsos, P. J.↗

Airborne simulation of Shuttle/Spacelab management and operation

The ASSESS (Airborne Science/Spacelab Experiments System Simulation) program is discussed. A simulated Spacelab operation was carried out aboard the CV-990 airborne laboratory at Ames Research Center. A scientific payload was selected to conduct studies in upper atmospheric physics and infrared astronomy with principal investigators from France, the Netherlands, England and the U.S. Two experiment operators (EOs) from the U.S. and two from Europe were trained to function as proxies for the principal investigators in operating, maintaining, and repairing the scientific instruments. The simulated mission, in which the EOs and a Mission Manager were confined to the aircraft and living quarters for a 1-week period while making scientific observations during nightly flights, provided experience in the overall management of a complex international payload, experiment preparation, testing, and integration, the training and selection of proxy operators, and data handling.

Mulholland, D. R.↗

Payload crew interface design criteria and techniques. Task 1: Inflight operations and training for payloads

Guidelines are developed for use in control and display panel design for payload operations performed on the aft flight deck of the orbiter. Preliminary payload procedures are defined. Crew operational concepts are developed. Payloads selected for operational simulations were the shuttle UV optical telescope (SUOT), the deep sky UV survey telescope (DUST), and the shuttle UV stellar spectrograph (SUSS). The advanced technology laboratory payload consisting of 11 experiments was selected for a detailed evaluation because of the availability of operational data and its operational complexity.

Carmean, W. D.↗