Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation results”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Tropical Tree Crop Simulation with a Process-Based, Daily Timestep Simulation Model (ALMANAC): Description of Model Adaptation and Examples with Coffee and Cocoa Simulations

Coffee (Coffea species) and Cocoa (Theobroma cacao) are important cash crops grown in the tropics but traded globally. This study was conducted to apply the ALMANAC model to these crops for the first time, and to test its ability to simulate them under agroforestry management schemes and varying precipitation amounts. To create this simulation, coffee was grown on a site in Kaua’i, Hawai’i, USA, and cocoa was grown on a site in Sefwi Bekwai, Ghana. A stand-in for a tropical overstory tree was created for agroforestry simulations using altered parameters for carob, a common taller tropical tree for these regions. For both crops, ALMANAC was able to realistically simulate yields when compared to the collected total yield data. On Kaua’i, the mean simulated yield was 2% different from the mean measured yield, and in all three years, the simulated values were within 10% of the measured values. For cocoa, the mean simulated yield was 3% different from the mean measured yield and the simulated yield was within 10% of measured yields for all four available years. When precipitation patterns were altered, in Ghana, the wetter site showed lower percent changes in yield than the drier site in Hawai’i. When agroforestry-style management was simulated, a low Leaf Area Index (LAI) of the overstory showed positive or no effect on yields, but when LAI climbed too high, the simulation was able to show the detrimental effect this competition had on crop yields. These simulation results are supported by other literature documenting the effects of agroforestry on tropical crops. This research has applied ALMANAC to new crops and demonstrated its simulation of different management and environmental conditions. The results show promise for ALMANAC’s applicability to these scenarios as well as its potential to be further tested and utilized in new circumstances.

60 APPLIED LIFE SCIENCES↗

Simulating non-native cubic interactions on noisy quantum machines

As a milestone for general-purpose computing machines, we demonstrate that quantum processors can be programed to efficiently simulate dynamics that are not native to the hardware. Moreover, on noisy devices without error correction, we show that simulation results are significantly improved when the quantum program is compiled using modular gates instead of a restricted set of standard gates. We demonstrate the general methodology by solving a cubic interaction problem, which appears in nonlinear optics, gauge theories, as well as plasma and fluid dynamics. To encode the non-native Hamiltonian evolution, we decompose the Hilbert space into a direct sum of invariant subspaces in which the nonlinear problem is mapped to a finite-dimensional Hamiltonian simulation problem. Furthermore, in a three-states example, the resultant unitary evolution is realized by a product of approximately 20 standard gates, using which approximately ten simulation steps can be carried out on state-of-the-art quantum hardware before results are corrupted by decoherence. In comparison, the simulation depth is improved by more than an order of magnitude when the unitary evolution is realized as a single cubic gate, which is compiled directly using optimal control. Alternatively, parametric gates may also be compiled by interpolating control pulses. Modular gates thus obtained provide high-fidelity building blocks for quantum Hamiltonian simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

JT9D performance deterioration results from a simulated aerodynamic load test

This paper presents the results of testing to identify the effects of simulated aerodynamic flight loads on JT9D engine performance. The test results were also used to refine previous analytical studies on the impact of aerodynamic flight loads on performance losses. To accomplish these objectives, a JT9D-7AH engine was assembled with average production clearances and new seals as well as extensive instrumentation to monitor engine performance, case temperatures, and blade tip clearance changes. A special loading device was designed and constructed to permit application of known moments and shear forces to the engine by the use of cables placed around the flight inlet. The test was conducted in the Pratt and Whitney Aircraft X-Ray Test Facility to permit the use of X-ray techniques in conjunction with laser blade tip proximity probes to monitor important engine clearance changes. Upon completion of the test program, the test engine was disassembled, and the condition of gas path parts and final clearances were documented. The test results indicate that the engine lost 1.1 percent in thrust specific fuel consumption (TSFC), as measured under sea level static conditions, due to increased operating clearances caused by simulated flight loads. This compares with 0.9 percent predicted by the analytical model and previous study efforts.

Stakolich, E. G.↗

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗

Evaluation of Marine Boundary Layer Clouds Over the Northeast Pacific During the CSET Campaign in E3SM Version 2

It is still challenging to reproduce marine boundary layer (MBL) clouds well in large-scale models despite their importance to the Earth's radiation budget and hydrological cycle. This study evaluates representation of the MBL and clouds in the Energy Exascale Earth System Model (E3SM) version 2. This study compares the E3SM simulation results with remote sensing and reanalysis data during the Cloud System Evolution in the Trades (CSET) field campaign to better understand the stratocumulus-to-cumulus cloud transition (SCT) over the northeast Pacific. E3SM results are extracted along the CSET Lagrangian trajectories. The comparison shows that the E3SM simulation applying horizontal wind nudging performs well in reproducing thermodynamic variables of the MBL and evolution trends of cloud variables along the trajectories. However, substantial overestimations of aerosol and cloud drop number (N d ) are observed, which is explained as an issue with version 2 of the model. Cloud fraction (CF) does decrease from the Californian coast to Hawaii in the E3SM simulation, but most CF values indicate either an overcast or almost clear sky, which differs from satellite and reanalysis data. The effect of N d overestimation on CF evolution is assessed via prescribed-N d simulations. Those simulations with N d modifications show negligible CF changes. A comparison of estimated inversion strength (EIS) also shows that the simulated EIS values are similar to those of reanalysis data. Our study suggests that cloud macrophysics and boundary layer processes are more important in improving the simulation to capture the SCT than refining the model's thermodynamics or cloud microphysics.

Choi, Kyoung Ock [Univ. of Washington, Seattle, WA↗

Comparison of edge turbulence characteristics between DIII-D and C-Mod simulations with XGC1

The physical processes taking place at the separatrix and scrape-off layer regions are crucial for the operation of tokamaks as they govern the interaction of hot plasma with the vessel walls. Numerical modeling of the edge with state-of-the-art codes attempts to elucidate the complex interactions between neoclassical drifts, turbulence, poloidal and parallel flows that control the physical set-up of the SOL region. Here, we present post-processing analysis of simulation results from the gyrokinetic code XGC1, comparing and contrasting edge turbulence characteristics from a simulation of the DIII-D tokamak against a simulation of the Alcator C-Mod tokamak. We find that the equilibrium ExB flux across the separatrix has a similar poloidal pattern in both discharges which can be explained by rB-drifts and trapped ion excursions. Furthermore, collisionality is noted to play a major role in the way that it prevents local charge accumulations from having more global effects in the C-Mod case. In both cases, turbulent electron heat flux is observed to be higher than the ion one and is possibly related to the need of electrons to maintain quasineutrality through the only channel available to them for exiting the confinement. By Fourier analysis, we identify turbulent frequencies and growth rates of the dominant mode in both simulations. In the case of C-Mod, these numbers point to the presence of a drift wave. In the DIII-D case, further linear simulations with the Gene code reveal a trapped electron mode. Furthermore, using a blob detection and tracking tool, we present the amplitude and size distributions of the blobs from both simulations. The amplitude distributions are in qualitative agreement with experimental observations while the size distributions are consistent with the fact that most of the blobs are not connecting to the divertor plates and suggest that they are generated by the shearing of the turbulent modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Sensorless Coil Detection Scheme based on Dead-Time Effect in Dynamic Wireless Power Transfer Systems

The detection of electric vehicles in dynamic wireless power transfer (DWPT) systems is important to reduce the standby losses and comply with the electromagnetic-field emission guidelines recommended by the International Commission for Non-Ionizing Radiation Protection. This paper discusses a novel sensorless coil detection scheme, which exploits the phenomenon of voltage-polarity reversal/notches caused by the dead-time effect in the full-bridge inverter. The variations in the system impedance and dead-time effects are collectively exploited to detect the receiver coil in the DWPT system. The proposed coil detection scheme is accomplished at low excitation voltage, which reduces the inverter standby losses. The theoretical analysis of the notch occurrence and open-loop simulation results are presented using a DWPT model developed in the piecewise linear electrical circuit simulation software.

Kavimandan, Utkarsh↗

Programmatic Advantages of Linear Equivalent Seismic Models

Underground explosions nonlinearly deform the surrounding earth material and can interact with the free surface to produce spall. However, at typical seismological observation distances the seismic wavefield can be accurately modeled using linear approximations. Although nonlinear algorithms can accurately simulate very near field ground motions, they are computationally expensive and potentially unnecessary for far field wave simulations. Conversely, linearized seismic wave propagation codes are orders of magnitude faster computationally and can accurately simulate the wavefield out to typical observational distances. Thus, devising a means of approximating a nonlinear source in terms of a linear equivalent source would be advantageous both for scenario modeling and for interpretation of seismic source models that are based on linear, far-field approximations. This allows fast linear seismic modeling that still incorporates many features of the nonlinear source mechanics built into the simulation results so that one can have many of the advantages of both types of simulations without the computational cost of the nonlinear computation. In this report we first show the computational advantage of using linear equivalent models, and then discuss how the near-source (within the nonlinear wavefield regime) environment affects linear source equivalents and how well we can fit seismic wavefields derived from nonlinear sources.

58 GEOSCIENCES↗

Neural pulse frequency modulation of an exponentially correlated Gaussian process

The effect of NPFM (Neural Pulse Frequency Modulation) on a stationary Gaussian input, namely an exponentially correlated Gaussian input, is investigated with special emphasis on the determination of the average number of pulses in unit time, known also as the average frequency of pulse occurrence. For some classes of stationary input processes where the formulation of the appropriate multidimensional Markov diffusion model of the input-plus-NPFM system is possible, the average impulse frequency may be obtained by a generalization of the approach adopted. The results are approximate and numerical, but are in close agreement with Monte Carlo computer simulation results.

Hutchinson, C. E.↗

Simulation of spaceborne stereo radar imagery - Experimental results

Computer simulation of radar imagery was used to investigate spaceborne stereo radar. The major conclusions reached are that stereo pairs representing different angles of incidence with the same look-direction appear best and that the angles of incidence and stereo intersection angle be matched to the slope and relief of terrain. A parametric tradeoff analysis was performed for eleven different angles of incidence over three different model areas. The eleven angles spanned the range from small- to large-incidence angles. The three model areas were selected as typical of relatively flat, moderately rough, and mountainous terrain. The stereo pair judged best for each model area are included.

Kaupp, V. H.↗

Satellite Data Transmission (SDT) requirement

An 85 Mb/s modem/codec to operate in a 34 MHz C-band domestic satellite transponder at a system carrier to noise power ratio of 19.5 dB is discussed. Characteristics of a satellite channel and the approach adopted for the satellite data transmission modem/codec selection are discussed. Measured data and simulation results of the existing 50 Mbps link are compared and used to verify the simulation techniques. Various modulation schemes that were screened for the SDT are discussed and the simulated performance of two prime candidates, the 8 PSK and the SMSK/2 are given. The selection process that leads to the candidate codec techniques are documented and the technology of the modem/codec candidates is assessed. Costs of the modems and codecs are estimated.

Chie, C. M.↗

In-flight identification of the Galileo spacecraft flexible mode characteristics

The scan platform of the Galialan spacecraft is attached to a flexible stator structure that separates the actuator from the platform-mounted inartial sensor. A scheme to identify the flexible mode characteristics (frequency, damping, and modal coefficient) of the stator using flight data is presentevd. A frequency domain analysis approach is taken and the identified mode characteristics will be used for updating the scan platform controler parameters. The influence of structural flexibility to th s can controller design is explained and the constraints in experting the identification procedure in flight are discused. Computer simulation results of the identification scheme are presented. The scheme in further verified by DISCOS simulations, in conjunction witha full spacecraft dynamics model and the scan platform controllers.

Wang, F. C.↗

Development of kinematic equations and determination of workspace of a 6 DOF end-effector with closed-kinematic chain mechanism

This report presents results from the research grant entitled Active Control of Robot Manipulators, funded by the Goddard Space Flight Center, under Grant NAG5-780, for the period July 1, 1988 to January 1, 1989. An analysis is presented of a 6 degree-of-freedom robot end-effector built to study telerobotic assembly of NASA hardware in space. Since the end-effector is required to perform high precision motion in a limited workspace, closed-kinematic mechanisms are chosen for its design. A closed-form solution is obtained for the inverse kinematic problem and an iterative procedure employing Newton-Raphson method is proposed to solve the forward kinematic problem. A study of the end-effector workspace results in a general procedure for the workspace determination based on link constraints. Computer simulation results are presented.

Nguyen, Charles C.↗

Dynamic Model of the BIO-Plex Air Revitalization System

The BIO-Plex facility will need to support a variety of life support system designs and operation strategies. These systems will be tested and evaluated in the BIO-Plex facility. An important goal of the life support program is to identify designs that best meet all size and performance constraints for a variety of possible future missions. Integrated human testing is a necessary step in reaching this goal. System modeling and analysis will also play an important role in this endeavor. Currently, simulation studies are being used to estimate air revitalization buffer and storage requirements in order to develop the infrastructure requirements of the BIO-Plex facility. Simulation studies are also being used to verify that the envisioned operation strategy will be able to meet all performance criteria. In this paper, a simulation study is presented for a nominal BIO-Plex scenario with a high-level of crop growth. A general description of the dynamic mass flow model is provided, along with some simulation results. The paper also discusses sizing and operations issues and describes plans for future simulation studies.

Finn, Cory↗

Analysis of Mercury Laser Altimeter Crossovers with Improved Mercury and MESSENGER Ephemerides

Based on previous applications of laser altimetry to planetary geodesy at GSFC [Mazarico et al. (2014),(2016)] and taking advantage of new accurate Mercury and MESSENGER orbits by [Genova et al. (2019)], we analyze altimetric crossovers from the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) Laser Altimeter (MLA) to solve for orbital and geodetic parameters (e.g., rotation and orientation). We present our results based on a new Python software package recently developed at GSFC that can simulate and process altimetry data in a closed-loop. Realistic simulations of MLA data, including an appropriate range noise from the instrument and realistic terrain roughness, are performed in order to fully characterize the robustness of the solution. The simulation results are then applied to our analysis of the full dataset acquired by the MLA instrument.

Bertone, Stefano↗

Computational Study of Modeling Fully-coupled Combustor-Turbine Interactions by the Open National Combustion Code (OpenNCC)

We investigate the flow fields inside the combustor and the high-pressure turbine including the stator and moving rotors, from the Energy Efficient Engine (E3) program. We then compare the fully-coupled simulations results with the prior results from the sequential approach, where key performance metrics for the combustor and HPT are compared. The results will provide one example of the impact of performing fully-coupled combustor/HPT simulations relative to sequential (one-way coupled) combustor and HPT simulations.

CFD↗

Computational Study of Modeling Fully-coupled Combustor-Turbine Interactions by the Open National Combustion Code (OpenNCC)

We investigate the flow fields inside the combustor and the high-pressure turbine including the stator and moving rotors, from the Energy Efficient Engine (E3) program. We then compare the fully-coupled simulations results with the prior results from the sequential approach, where key performance metrics for the combustor and HPT are compared. The results will provide one example of the impact of performing fully-coupled combustor/HPT simulations relative to sequential (one-way coupled) combustor and HPT simulations.

CFD↗

Numerical Study of Combustor-Turbine Interactions Using Open-National Combustion Code (OpenNCC)

We investigate the flow fields inside the combustor and the high-pressure turbine including the stator and moving rotors, from the Energy Efficient Engine (E3) program. We then compare the fully-coupled simulations results with the prior results from the sequential approach, where key performance metrics for the combustor and HPT are compared. The results will provide one example of the impact of performing fully-coupled combustor/HPT simulations relative to sequential (one-way coupled) combustor and HPT simulations.

CFD↗