Search NASA⌕ Search

SEARCH · Search NASA

Results for “sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

A critical literature review of focused electron beam induced deposition

An extensive review is given of the results from literature on electron beam induced deposition. Electron beam induced deposition is a complex process, where many and often mutually dependent factors are involved. The process has been studied by many over many years in many different experimental setups, so it is not surprising that there is a great variety of experimental results. To come to a better understanding of the process, it is important to see to which extent the experimental results are consistent with each other and with the existing model. All results from literature were categorized by sorting the data according to the specific parameter that was varied (current density, acceleration voltage, scan patterns, etc.). Each of these parameters can have an effect on the final deposit properties, such as the physical dimensions, the composition, the morphology, or the conductivity. For each parameter-property combination, the available data are discussed and (as far as possible) interpreted. By combining models for electron scattering in a solid, two different growth regimes, and electron beam induced heating, the majority of the experimental results were explained qualitatively. This indicates that the physical processes are well understood, although quantitatively speaking the models can still be improved. The review makes clear that several major issues remain. One issue encountered when interpreting results from literature is the lack of data. Often, important parameters (such as the local precursor pressure) are not reported, which can complicate interpretation of the results. Another issue is the fact that the cross section for electron induced dissociation is unknown. In a number of cases, a correlation between the vertical growth rate and the secondary electron yield was found, which suggests that the secondary electrons dominate the dissociation rather than the primary electrons. Conclusive evidence for this hypothesis has not been found. Finally, there is a limited understanding of the mechanism of electron induced precursor dissociation. In many cases, the deposit composition is not directly dependent on the stoichiometric composition of the precursor and the electron induced decomposition paths can be very different from those expected from calculations or thermal decomposition. The dissociation mechanism is one of the key factors determining the purity of the deposits and a better understanding of this process will help develop electron beam induced deposition into a viable nanofabrication technique00.

36 MATERIALS SCIENCE↗

Generating Polarized High-Brightness Muon Beams With High-Energy Gammas

Hadron colliders are impractical at very high energies as effective interaction energy is a fraction of the energies of the beams and luminosity must rise as energy squared. Further, the prevailing gluon-gluon background radiation makes it difficult to sort out events. e{sup +}e{sup -} colliders, on other hand, are constrained at TeV energies by beamstrahlung radiation and also by cost as long linacs are required to avoid synchrotron radiation in the rings. A muon collider will have the same advantages in energy reach as an e{sup +}e{sup -} collider, but without prohibitive beamstrahlung- and synchrotron- radiation. Generation of the high-brightness polarized muon ({mu}{sup -}{mu}{sup +}) beams through gamma conversion into pairs in the nuclei field is considered in this paper. The dominant effect in the interaction of the high-energy photons with the solid target will be the production of electron-positron pairs. The low-phase space of the resulting muon beams adequately compensates for the small probability of generating a {mu}{sup -}{mu}{sup +} pair.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cyclotron Requirements for Multi-disciplinary Programs

As time has passed, the various Cyclotron programs have changed over the years. In the ''early'' times of Cyclotron operations, the emphasis was on a more single sided approach such as Clinical or Research or Production. However, as time passed, the disciplines became more interconnected until today, it is unusual to have a Cyclotron and only have a single program unless it is pure production. More and more, especially in public areas such as Universities or Health Centers, you are seeing programs that do all three types of disciplines: Production; Clinical or Patient Diagnostics and/or Treatment; and Research, either in the development and manufacture of new Radio-Isotopes, new Diagnostic or Therapeutic Compound Development, or Clinical Research involving subject testing. While all three of these disciplines have some common requirements, they also have some very different requirements that may be completely counterproductive to other requirements. For a program where all three disciplines are required to be successful, it is necessary come up with some sort of compromise that meets all the various requirements. During this talk, we will try to identify some of these different requirements for the various disciplines and how these could impact the other disciplines. We will also discuss ideas for some possible compromises that might reduce the conflict between the various disciplines.

43 PARTICLE ACCELERATORS↗

Study of Polarized Sea Quark Distributions in Polarized Proton-Proton Collisions at sq root(s) = 500 GeV with PHENIX

The PHENIX spin program studies the flavor structure of the polarized sea quark distributions in polarized proton-proton collisions. Starting from 2009 run, the quark and antiquark polarization, sorted by flavor, will be investigated with the parity-violating single-spin asymmetry of W-boson production at the collision energy of sq root(s) = 500 GeV. High momentum muons from W-boson decay are detected in the PHENIX muon arms. The muon trigger is being upgraded to allow one to select high momentum muons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fusion of {sup 48}Ca+{sup 48}Ca Far Below the Barrier

In recent years, a puzzling pattern has been observed in fusion cross sections well below the Coulomb barrier, characterized as a departure from the exponential-like behavior predicted by standard coupled-channels models, known as fusion hindrance. We report on recent fusion measurements performed at the Laboratori Nazionali di Legnaro, in particular the {sup 48}Ca+{sup 48}Ca reaction down to the level of 0.6 {mu}b. Unlike most recent results in this field, we do not observe the typical divergent behavior of the logarithmic derivative; but rather a sort of saturation, albeit at a larger value than predicted with a standard nucleus-nucleus potential.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NONDESTRUCTIVE EVALUATION OF HYBRID BEARING CERAMIC ROLLERS USING PROCESS COMPENSATED RESONANT TESTING (PCRT)

We have used Process Compensated Resonant Testing (PCRT) for studying structural integrity and functional performance of ceramic balls used in various auxiliary power units (APUs), propulsion engines, and defense and space missiles. The results show that PCRT is successful in sorting acceptable parts from parts with defects such as micro-structural changes, C-cracks, and scuffs. However, PCRT suffers from limitations, generally not determining the type, size or location of the anomaly. The pursuit of improvements to PCRT is an on-going process.

36 MATERIALS SCIENCE↗

Note: X-ray radiography for measuring chemical diffusion in metallic melts

A x-ray radioscopy technique for measuring in situ chemical diffusion coefficients in metallic melts is presented. The long-capillary diffusion measurement method is combined with imaging techniques using microfocus tubes and flat panel detectors in order to visualize and quantitatively analyze diffusive mixing of two melts of different chemical composition. The interdiffusion coefficient as function of temperature and time is obtained by applying Fick's diffusion laws. Tracking the time dependence of the mean square penetration depth of the mixing process allows to detect changes in the mass transport caused by convective flow. The possibility to sort out convective mass transport contributions from analysis enhances significantly the accuracy compared to the conventional long-capillary diffusion measurement method with postmortem analysis. The performance of this novel diffusion measurement method with x-ray radiography technique is demonstrated by a diffusion experiment in an Al-Ni melt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin physics at RHIC

Polarized-proton collisions at a collision energy 200 GeV started in 2001 at RHIC in BNL. We have investigated a polarized structure of the proton to understand the origin of the nucleon spin 1/2 with polarized-proton collisions. The first goal of spin physics at RHIC is determination of the gluon-spin contribution to the proton spin. The PHENIX and STAR experiments have investigated the gluon-spin contribution by measuring longitudinal-spin asymmetries of neutral pion and jet produced in longitudinally-polarized proton collisions. Experimental results have shown that these asymmetries are small and strong constraints have been given for the gluon-spin contribution. From 2009, polarized-proton collisions at a collision energy 500 GeV started and we have investigated flavor-sorted contribution of the quark spin to the proton spin with weak-boson production. The final remaining piece of information to understand the proton spin is orbital-angular momenta of quarks and gluons. Multi-dimensional structure of the nucleon which includes information of the orbital-angular motion inside the nucleon has been investigated with transverse-spin asymmetry measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Medipix3 array high performance read-out board for synchrotron research

The Medipix3 ASIC is one of the most advanced chip that is presently available to build photon counting area detectors. The capabilities of the chip include adjacent pixels charge summing circuitry to sort out the distortion due to charge sharing, simultaneous counting and read-out that enables frames to be acquired without dead time, the colour mode of operation that enables up to eight energy bands to be acquired. In order to fully exploit the capabilities of the Medipix3 chip in synchrotron research, a high performance electronic board capable of driving large arrays of chips is necessary. We propose a parallel read-out board of Medipix3 chip arrays with a scalable architecture that allows driving the Medipix3 chip in all of its modes of operation. The board functions include the control of the chip arrays, data formatting and data compression, the management of the communications with the data storage devices, and operation in various trigger modes. In addition to this the board will have some 'intelligence' embedded. This will add some very important features to the final detector such as pattern recognition, capability of variable frame duration as a function of the photon flux, feedback to other equipment and real time calculations of data relevant to experiments such as the autocorrelation function.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrodeposited Silver Nanoparticles Patterned Hexagonally for SERS

We have fabricated hexagonally patterned silver nanoparticles for surface-enhanced Raman scattering (SERS) by electrodepositing silver on the surface of an aluminum plate prepared by completely removing the oxide from anodic aluminum oxide (AAO) templates. Even after completely removing the oxide, well-ordered hexagonal patterns, similar to the shape of graphene, remained on the surface of the aluminum plate. The borders of the hexagonal pattern protruded up to form sorts of nano-mountains at both the sides and apexes of the hexagon, with the apexes protruding even more significantly than the sides. The aluminum plate prepared by completely removing the oxide has been used in the preparation of SERS substrates by sputter-coating of gold or silver on it. Instead of sputter-coating, here we have electro-deposited silver on the aluminum plate. When silver was electro-deposited on the plate, silver nanoparticles were made along the hexagonal margins.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of the roughness characteristics on the wire tool surface for the electrical discharge machining properties

Wire electrical discharge machining (WEDM) has been investigated to obtain the better discharge machining properties of the removal rate and the surface roughness in a few decades. Recently, it revealed that the rough tool electrodes can improve the WEDM properties for some sort of materials. In this study, the rough wire electrodes using a wet blasting method was developed and evaluated the machining performance for the insulated Si{sub 3}N{sub 4} in the WEDM processes. As the results, it could not recognize the advantage of roughness wire electrode under the high-energy condition, but it found that the electro-conductive layer thickness became thinner in comparison with those of normal wires. On the contrary, it could be obtained the better surface roughness in the low energy condition. It was supposed that the roughed wire surface generates the homogeneous dispersion discharges on the workpiece.

36 MATERIALS SCIENCE↗

Solid Particle Erosion Wear of GF/EP Composites with Added Al{sub 2}O{sub 3}

This study has targeted to investigate wear behavior of a sort of new composite material where Al{sub 2}O{sub 3}({approx_equal}150 {mu}m) particles were added to glass fiber and epoxy resin (GF/EP) at an amount of 15% and 30%. The method used in the tests, was the one that use dry and compressed air to accelerate abrasive particles onto a specimen and from there the wear formed was investigated. Striking speed was determined with the help of a double disc method by making use of pressure difference, whereas impinging angles were set by turning the specimen holder around its axis. As a result, in this experimental study, solid particle erosion behavior of a new formed composite material was investigated and erosion rates computed where three different impinging angles (30 deg., 60 deg. and 90 deg.), three different striking speeds (23, 34 and 53 m/s) and two different fiber directions (0 deg. and 45 deg.) were used to enable angular aluminum abrasives with average diameter of 400 {mu}m to bombard target specimens to undertake the tests. In addition, the study presents microscopic views of the specimens after undergoing the tests.

36 MATERIALS SCIENCE↗

Dust Emission Induced By Friction Modifications At Tool Chip Interface In Dry Machining In MMC{sub p}

This paper investigates the relationship between dust emission and tribological conditions at the tool-chip interface when machining Metal Matrix composite reinforced with particles (MMCp) in dry mode. Machining generates aerosols that can easily be inhaled by workers. Aerosols may be composed of oil mist, tool material or alloying elements of workpiece material. Bar turning tests were conducted on a 2009 aluminum alloy reinforced with different level of Silicon Carbide particles (15, 25 and 35% of SiCp). Variety of PCD tools and nanostructured diamond coatings were used to analyze their performances on air pollution. A spectrometer was used to detect airborne aerosol particles in the size range between 0.3{mu}m to 20 {mu}m and to sort them in 15 size channels in real time. It was used to compare the effects of test parameters on dust emission. Observations of tool face and chip morphology reveal the importance of friction phenomena. It was demonstrated that level of friction modifies chip curvature and dust emission. The increase of level of reinforcement increase the chip segmentation and decrease the contact length and friction area. A ''running in'' phenomenon with important dust emission appeared with PCD tool due to the tool rake face flatness. In addition dust generation is more sensitive to edge integrity than power consumption.

36 MATERIALS SCIENCE↗

On the bounce-averaging of scattering rates and the calculation of bounce period

For many applications to planetary magnetospheres and elsewhere in the Universe, it is desirable to average physical quantities such as particle and plasma transport coefficients over a charged particle's bounce motion between magnetic mirror points along field lines. In this paper, we perform such bounce-averaging in a way that avoids singularities in the integrands of expressions that arise in calculations of this sort. Our method applies in principle to an almost arbitrary magnetic field model. We illustrate the advantage of using our method for removing the integrand's singularity through a change of variables (rather than by truncating the integral over latitude at points progressively nearer to the mirror point) by computing the component of the bounce-averaged momentum-space diffusion tensor in a dipolar magnetic field both ways for resonance interaction of geomagnetically trapped relativistic (1 MeV) electrons with field-aligned whistler-mode plasma waves at L = 6 (a field line that passes near synchronous altitude). Moreover, we develop improved analytical approximations for particle bounce periods in a dipolar magnetic field by minimizing mean square errors with respect to expansion coefficients in algebraic representations of the bounce period.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Standard v-Interactions at a Neutrino Factory: Correlation and CP violation effects

The so-called Non-Standard v-Interactions in propagation is a widely studied topic in the Neutrino Factory literature. However, special attention has not been paid to the possible correlation effects among the whole set of parameters arising in this context (standard and non-standard ones). Here we will focus on these correlation effects analysing the performance of three different Neutrino Factory setups. In addition, we explore the new avenues of CP violation coming from this sort of Non-Standard v-Interactions with the same perspective, in other words, studying the relation among the several CP-phases involved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Controlling the doping of single-walled carbon nanotube networks by proton irradiation

We demonstrate the controlled desorption of adventitious dopants on networks of single-walled carbon nanotubes (SWNTs) with 100 keV proton irradiation. Networks of sorted metallic, semiconducting SWNTs, and unsorted SWNTs were investigated. The removal of dopants was indicated by an increase in sheet resistances along with an increase in the absorption of the low energy absorption band of semiconducting SWNTs. Semiconducting and unsorted SWNT networks exhibited the largest change in their sheet resistance, which indicates the conductivity of unsorted SWNT networks is dominated by the tube-tube junctions of semiconducting SWNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monodisperse alginate microgel formation in a three-dimensional microfluidic droplet generator

Droplet based microfluidic systems provide an ideal platform for partitioning and manipulating aqueous samples for analysis. Identifying stable operating conditions under which droplets are generated is challenging yet crucial for real-world applications. A novel three-dimensional microfluidic platform that facilitates the consistent generation and gelation of alginate-calcium hydrogel microbeads for microbial encapsulation, over a broad range of backing pressures, in the absence of surfactants, is described. The unique three-dimensional design of the fluidic network utilizes a height difference at the junction between the aqueous sample injection and organic carrier channels to induce droplet formation via a surface tension enhanced self-shearing mechanism. Combined within a flow-focusing geometry, under constant pressure control, this arrangement facilitates predictable generation of droplets over a much broader range of operating conditions than conventional two-dimensional systems. The impact of operating pressures and geometry on droplet gelation, aqueous and organic material flow rates, microbead size and bead generation frequency are described. The system presented provides a robust platform for encapsulating single microbes in complex mixtures into individual hydrogel beads, and provides the foundation for the development of a complete system for sorting and analyzing microbes at the single cell level.

36 MATERIALS SCIENCE↗

Dielectronic recombination studies based on EBIT

Dielectronic recombination (DR) process plays an important role in high temperature plasmas, where DR can affect charge balance and level populations significantly, and can cause radiative energy loss. Resolvable DR sourced satellite lines are often used for plasma temperature diagnostics, while the un-resolvable ones disturb determining spectral line shape, line intensity, and line position. Data of DR resonant strength is vital for accurate modeling of high temperature plasmas. DR studies are also important for testing atomic structure and atomic collision theories, since they carry information on quantum electrodynamics, relativistic effects, electron correlations and so on. Electron beam ion trap (EBIT) is an accelerator type device, which is capable of acting as both ion sources and light sources. EBIT can produce a special sort of plasma, in which electron energy is tunable and has a very narrow distribution. This made it possible for disentanglement studies on electron ion collision processes in plasmas. In this paper, experimental studies of DR processes based on electron beam ion traps (EBIT) will be discussed.

43 PARTICLE ACCELERATORS↗