Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Photoluminescence properties and device application of CsPb2Br5 quantum dots in glasses

Highlights: • Photoluminescence spectra of CsPb{sub 2}Br{sub 5} QDs were tuned from 499 to 506 nm. • The CsPb{sub 2}Br{sub 5} glass showed an thermal stability from 298 K to 433 K. • WLED were realized through incorporating QDs glasses with red phosphor. - Abstract: Herein, CsPb{sub 2}Br{sub 5} quantum dots (QDs) in glasses under various durations of heat-treatment at 420 °C was investigated. Photoluminescence (PL) spectra of CsPb{sub 2}Br{sub 5} QDs were tuned from 499 to 506 nm and the decay time show a increasing for the structure defect and electron-hole consist in CsPb{sub 2}Br{sub 5} QDs glasses. The CsPb{sub 2}Br{sub 5} glass showed an thermal stability with about 85% emission loss when elevating temperature from 298 K to 433 K. Moreover, The warm white light emitting diode (WLED) was realized through incorporating CaAlSiN{sub 3}:Eu{sup 2+} red phosphor with CsPb{sub 2}Br{sub 5} QDs doped borosilicate glasses on an InGaN blue chip. Finally, we achieved a luminous efficacy of 42.7 lm/W, CCT of 3915 K and CRI of 68.5 under 20 mA current driving.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of enhanced performance when Mn-rich rocksalt cathodes transform to δ -DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase — named δ — with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the δ -phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of 16 d vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the δ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

Anand, Shashwat↗

Strain-relaxed tetragonal MAPbI 3 results in efficient mesoporous solar cells

In mesoporous organo-halide perovskite solar cells, the coexistence of tetragonal phase and cubic phase in the perovskite layer is found to result in strained crystal structure at the mesoporous TiO 2 (mp-TiO 2 )/perovskite heterointerface. This results in structural defects pinholes, grain boundaries, and interfacial porosity which is detrimental towards photovoltaic performance and device stability. The strain at the interface originates from the lattice mismatch between the mp-TiO 2 nanoparticles (NPs) and perovskite. Here, a transformative approach is demonstrated to realize relaxed and high purity tetragonal phase MAPbI 3 (RP) near the mp-TiO 2 interface region. This approach involves inserting a ~2 nm lattice matched buffer layer of cubic CsPbBr 3 between mp-TiO 2 NPs and MAPbI 3 , which serves as a template for epitaxial growth for top MAPbI 3 . As a result, the solar cell with relaxed MAPbI3 shows a power conversion efficiency (PCE) of 22.12% with significantly enhanced environmental, light, and thermal stability.

14 SOLAR ENERGY↗

High-coercivity ThMn 12 -type monocrystalline Sm–Zr–Fe–Co–Ti particles by high-temperature reduction diffusion

The ThMn 12 -type (Sm,Zr)1(Fe,Co,Ti) 12 compounds have the potential of powerful permanent magnets. Magnetically hard and anisotropic powders of such compound have been prepared by subjecting elemental oxides and Co mixed with Ca and CaO dispersant to a succession of high-energy ball-milling, reduction diffusion at 990–1220 °C and repeated washing. The size of the resulting ThMn 12 -type crystallites, their coercivity and fraction of monocrystalline particles were all found to increase with the reduction-diffusion temperature. Particles synthesized at 1220 °C were highly monocrystalline with a mean size of 0.54 μm and, after a magnetic-field alignment, exhibited a coercivity of 1.26 T and a full-density-projected maximum energy product of at least 209 kJ/m 3 (26.3 MGOe). Here, the strong positive effect of the reduction-diffusion temperature on the coercivity has been attributed to separation of the crystallites and to decrease in the incidence of structural defects.

36 MATERIALS SCIENCE↗

CDB-AP: An application for coincidence Doppler broadening spectroscopy analysis

Coincidence Doppler Broadening (CDB) Positron Annihilation Spectroscopy (PAS) is a material analysis technique that can be used to non-destructively measure characteristics of structural defects in samples. Analyzing and comparing large datasets obtained using this technique, however, can be complicated and time intensive. The Coincidence Doppler Broadening Analysis Program (CDB-AP) is a graphical user interface that facilitates rapid analysis of many data files while using transparent processes. It is already used in three laboratories at Idaho National Laboratory and can be used in laboratories worldwide.

36 MATERIALS SCIENCE↗

Intrinsic mechanical properties and seeding effect of tobermorite synthesized in supercritical water

This publication reports for the first time the physiochemical, the intrinsic mechanical properties and the seed effect of anomalous Al-substituted 11 Å tobermorite synthesized via the innovative supercritical hydrothermal flow process at 400 °C and 25 MPa. This approach allows synthesizing highly crystalline tobermorite fibers in only 8 s, with characteristics very close to the natural tobermorite. The anomalous 11 Å tobermorite exhibits aluminosilicate chains with a high polymerisation degree and a less defective structure compared to materials produced via the conventional hydrothermal method. Furthermore, the intrinsic mechanical properties of Al-tobermorite synthesized in supercritical water are investigated for the first time by High-Pressure XRD. This Al-substituted 11 Å tobermorite is characterised by higher incompressibility along the b-axis and bulk modulus K0 in comparison with what is commonly observed for other synthetic tobermorite. The tobermorite acts as nucleation points to trigger the quick formation of the hydration product in Portland cement paste.

Calcium silicate hydrate↗

Exploring Ca–Ce–M–O (M = 3d Transition Metal) Oxide Perovskites for Solar Thermochemical Applications

Solar thermochemical (STC) processes hold promise as efficient ways to generate renewable fuels, fuel precursors, or chemical feedstocks using concentrated sunlight. Specifically, one actively researched approach is the two-step STC cycle, which uses a redox-active, off-stoichiometric, transition-metal oxide material to split water and/or CO 2 , generating H 2 and/or CO, respectively, or syngas (a combination of H 2 and CO). Identifying novel metal oxides that yield larger reduction extents (practically achievable off-stoichiometries) than the state-of-the-art CeO 2 is critical. Here, we explore the chemical space of Ca–Ce–M–O (M = 3d transition metal, except Cu and Zn) metal oxide perovskites, with Ca and/or Ce occupying the A site and M occupying the B site within an ABO 3 framework, as potential STC candidates. We use density functional theory (DFT)-based calculations and systematically evaluate the oxygen vacancy (VaO) formation energy (≈ enthalpy of reduction in an STC cycle), electronic properties, thermodynamic stability of CaMO 3 , CeMO 3 , and Ca 0.5 Ce 0.5 MO 3 perovskites, and the VaO formation energy within Ca 0.5 Ce 0.5 Ti 0.5 Mg 0.5 O 3 perovskite. We consider only Ca and/or Ce on the A site because of their similar size and the potential redox activity of Ce 4+ . If both Ce and M exhibit simultaneous reduction with Va O formation, the resulting perovskite could exhibit a larger entropy of reduction than a single cation reduction. The increased entropy produces increased reduction for fixed temperature, partial pressure of oxygen, and reduction enthalpy, and therefore increased STC efficiency. Importantly, we identify Ca 0.5 Ce 0.5 MnO 3 , Ca 0.5 Ce 0.5 FeO 3 , and Ca 0.5 Ce 0.5 VO 3 to be promising candidates based on their Va O formation energy and thermodynamic (meta)stability. Moreover, based on our calculated on-site magnetic moments, electron density of states, and electron density differences between pristine and defective structures, we find Ca 0.5 Ce 0.5 MnO 3 to exhibit simultaneous reduction of both Ce 4+ (A-site) and Mn 3+ (B-site), highlighting a particularly promising candidate for STC applications with a predicted higher entropy of reduction than CeO 2 . Lastly, we extract metrics that govern the trends in Va O formation energies, such as standard reduction potentials, and provide pointers for further experimental and theoretical studies, which will enable the design of improved materials for the STC cycle.

14 SOLAR ENERGY↗

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗

Optical Effects of Divalent Functionalization of Carbon Nanotubes

Covalent functionalization of single-walled carbon nanotubes (SWCNTs) enables tuning of their optical properties through the generation of sp3-hybridized defects with distinct localized morphology. Groups with strong electron-withdrawing abilities result in redshifted emission experimentally. Further redshifts can be generated by groups bound to more than one carbon atom in the SWCNT (“divalent functionalization”). Depending on the type of divalent functionalization, the spectral diversity is reduced compared to their monovalent counterparts. Here we study the effect of divalent functionalization on the exciton localization at the defect site and related redshifts in emission of (6,5) SWCNT through low-temperature spectroscopy measurements and time dependent density functional theory calculations. These effects are characterized for three classes of divalent compounds distinct in the number of atoms in the functional group and bonding pattern to the tube. The bond character of the two carbon atoms proximal to the defect site is found to have a notable impact on the system stability and spectral redshifts. Functionalized systems are stabilized when the hybridization at the SWCNT remains sp2-like due to its ability to form planar bonds to the remaining hexagonal network, while bond character in the functionalized regions affects the redshifts. This is only possible for certain bonding geometries in divalent species, justifying their decreased spectral diversity. We further show that functionalization at spatially separated sites on the tube can be accompanied by a second chemical adduct, and the configuration of the resulting defect is dictated by bond reactivity following the first addition. This behavior justifies the spectral trends of a class of divalent systems with linker chains or high defect concentration. These results further corroborate that adducts predominantly form chemical bonds only to the neighboring carbons on the SWCNT surface (ortho species) in experimental samples. Our analysis of bond character in the vicinity of the defect sites rationalizes appearance of many spectral features arising from monovalent and divalent defect states of functionalized SWCNTs. As a result, this emerging understanding enables tuning of the emission characteristics through careful control of the defect structure.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulations of Calcite Fracture in Water

Calcite (CaCO 3 ) is one of the most common minerals in geologic and engineered systems. It is often in contact with aqueous solutions, causing chemically assisted fracture that is critical to understanding the stability of subsurface systems and manmade structures. Calcite fracture was evaluated with reactive molecular dynamics simulations, including the impacts of crack tip geometry (notch), the presence of water, and surface hydroxyl groups. Chemo-mechanical weakening was assessed by comparing the loads where fracture began to propagate. Our analyses show that in the presence of a notch, the load at which crack growth begins is lower, compared to the effect of water or surface hydroxyls. Additionally, the breaking of two adjacent Ca–O bonds is the kinetic limitation for crack initiation, since transiently broken bonds can reform, not resulting in crack growth. In aqueous environments, fresh (not hydroxylated) calcite surfaces exhibited water strengthening. Manual addition of H + and/or OH – species on the (104) calcite surface resulted in chemo-mechanical weakening of calcite by 9%. Achieving full hydroxylation of the calcite surface was thermodynamically and kinetically limited, with only 0.17–0.01 OH/nm 2 surface hydroxylation observed on the (104) surface at the end of the simulations. In conclusion, the limited reactivity of pure water with the calcite surface restricts the chemo-mechanical effects and suggests that reactions between physiosorbed water and localized structural defects may be dominating the chemo-mechanical process in the studies where water weakening has been reported.

Calcite↗

Morphology, Deformations, and Photocatalytic Activity of Thermally Treated Brookite Titanium Dioxide Thin Films

Metastable states, in which the coupling between long-range lattice deformations and electronic properties can be controlled, provide a pathway to tailoring the behavior of photocatalytic materials by directing the flow of photoinduced charge carriers. Brookite is a metastable polymorph of earth-abundant TiO 2 that exhibits photocatalytic function and, due to its high energy relative to the anatase and rutile polymorphs, may serve as a precursor for the formation of transitional metastable structures. In this work, facile thermal annealing is employed to promote the formation of predominantly brookite-phase films, regulate the brookite lattice distortions, and determine the effect of these distortions on charge separation, ultimately directed at enhancing photocatalytic activity. Profile fitting of X-ray diffraction patterns and peak shifts in Raman spectra revealed structural distortions of the brookite lattice. Structural defects, including lattice gliding, dislocations, stacking faults, and twin boundaries, were observed using scanning transmission electron microscopy. First-principles simulations reveal how the lattice distortions associated with stacking faults induce band bending, thus increasing the photocatalytic activity of brookite. In conclusion, this study provides insight into the microstructural tuning of metastable phases to enhance their unique functionalities.

band bending↗

Oxygen Deficiency and Reactivity of Spinel NiCo 2 O 4 (001) Surfaces

We carried out density functional theory (DFT) calculations with on-site Hubbard U corrections to investigate the structure, defects, and reactivity of (001) surfaces of spinel NiCo 2 O 4 (NCO), a promising catalyst for CO and methane oxidation. By examining surfaces with different Co/Ni compositions, we find that the formation of surface oxygen vacancies (VOs) on NCO(001) is strongly affected by the neighboring cation in the third layer, the computed formation energy being largest (~1.2 eV) for O vacancies coordinated to third layer Co and smallest (~0.5 eV) for VOs coordinated to a Ni neighboring another Ni ion. As a result, VO formation is generally much easier on NCO (001) than on Co 3 O 4 (001) surfaces, suggesting that NCO may be a better catalyst than Co 3 O 4 for oxidation reactions based on the Mars–Van Krevelen mechanism. Surface oxygen vacancies on reduced NCO surfaces can be healed through dissociative water adsorption at room temperature. In contrast, adsorption of molecular oxygen at VOs is energetically unfavorable under ambient conditions, suggesting that O 2 adsorption may represent the thermodynamic limiting step for oxidation reactions on NCO(001) surfaces.

Shi, Xiao↗

Effects of Dopant Ionic Radius on Cerium Reduction in Epitaxial Cerium Oxide Thin Films

The role of trivalent rare-earth dopants in ceria epitaxial films on surface ion exchange reactivity and ion conductivity has been systematically studied. Single-crystal epitaxial films with unique crystal orientation and micro-structure nature have allowed us to rule out the influence of structural defects on both transport and surface ion exchange properties. The films conductivities were larger than those reported in literature for both polycrystalline ceramic pellets and crystalline films. An increase in oxygen vacancies and Ce 3+ concentration while decreasing the dopant ionic radius from La 3+ to Yb 3+ was observed, thus explaining the measured increased activation energy and enhanced surface reactivity. The more significant ability of smaller dopant ionic radius in releasing the stress strength induced by the larger Ce 3+ ionic radius allows promoting the formation of oxygen vacancies and Ce 3+ , which are two precious species in determining the efficiency of ion transport and surface ion exchange processes. This can open new perspectives in designing ceria-based materials in tailoring functional properties, either ion migration or surface reactivity, by rational cation substitutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revisiting Anisotropic Diffusion of Carbon Dioxide in the Metal–Organic Framework Zn 2 (dobpdc)

The diffusion of gases confined in nanoporous materials underpins membrane and adsorption-based gas separations, yet relatively few measurements of diffusion coefficients in the promising class of materials, metal–organic frameworks (MOFs), have been reported to date. Recently we reported self-diffusion coefficients for 13 CO 2 in the MOF Zn 2 (dobpdc) (dobpdc 4– = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) which has one-dimensional channels with a diameter of approximately 2 nm [Forse, A. C.; J. Am. Chem. Soc. 2018, 140, 1663-1673]. By analyzing the evolution of the residual 13 C chemical shift anisotropy line shape at different gradient strengths, we obtained self-diffusion coefficients both along (D ∥ ) and between (D ⊥ ) the one-dimensional MOF channels. The observation of nonzero D ⊥ was unexpected based on the single crystal X-ray diffraction structure and flexible lattice molecular dynamics simulations, and we proposed that structural defects may be responsible for self-diffusion between the MOF channels. In this paper we revisit this analysis and show that homogeneous line broadening must be taken into account to obtain accurate values for D ⊥ . In the presence of homogeneous line broadening, intensity at a particular NMR frequency represents signal from crystals with a range of orientations relative to the applied magnetic field and magnetic gradient field. To quantify these effects, we perform spectral simulations that take into account homogeneous broadening and allow improved D ⊥ values to be obtained. Finally, our new analysis best supports nonzero D ⊥ at all studied dosing pressures and shows that our previous analysis overestimated D ⊥ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Unique Reactivity of Cu for Electrochemical CO 2 Reduction with a 3-Site Model

Cu-based catalysts for the electrochemical reduction of CO 2 and CO exhibit a perplexingly unique reactivity toward multicarbon based products compared to other studied electrocatalysts. Here, in this study, we use insights gained from a recent phenomenological 3-site microkinetic model and grand-canonical density functional theory calculations to clarify the importance of an underemphasized aspect critical to Cu’s unique reactivity: a population of so-called “reservoir” sites. Using model Cu surface motifs, we discuss how these types can be represented by undercoordinated structural defects like step edges and grain boundaries which form a network of highly anisotropic migration channels. These pathways are found to be amenable for feeding *CO over time to reactive sites like Cu adatoms more active toward C–C coupling. These results highlight an often overlooked aspect of catalyst optimization: reservoir site engineering, which exploits surface mobility and presents an equally important avenue for electrocatalyst engineering oversimply maximizing active site densities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Tunable Polaron Distortions Control the Extent of Halide Demixing in Lead Halide Perovskites

Photoinduced phase separation in mixed halide perovskites emerges from their electro-mechanical properties and high ionic conductivities, resulting in photoinduced I$^-$ rich charge carrier traps that diminish photovoltaic performance. Whether photoinduced phase separation stems from the polycrystalline microstructure or is an intrinsic material property has been an open question. We investigate the nanoscale photoinduced behavior of single-crystal mixed Br$^-$/I$^-$ methylammonium (MA + ) lead halide perovskite (MAPb(Br x I 1- x ) 3 ) nanoplates, eliminating effects from extended structural defects. Even in these nanoplates, we find that phase separation occurs, resulting in I$^-$rich clusters that are nucleated stochastically and stabilized by polarons. Upon lowering the electron-phonon coupling strength by partially exchanging MA + for Cs + , a phase-separated steady state is not reached, nevertheless transient I$^-$ clustering still occurs. Our results, supported by multiscale modeling, demonstrate that photoinduced phase separation is an intrinsic property of mixed halide perovskites, the extent and dynamics of which depends on the electron-phonon coupling strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Lung-Mimetic Multilamellar Bodies with Lipid Compositions Relevant in Pneumonia

The hierarchical assembly of lipids, as modulated by composition and environment, plays a significant role in the function of biological membranes and a myriad of diseases. Elevated concentrations of calcium ions and cardiolipin (CL), an anionic tetra-alkyl lipid found in mitochondria and some bacterial cell membranes, have been implicated in pneumonia recently. However, their impact on the physicochemical properties of lipid assemblies in lungs and how it impairs alveoli function is still unknown. We use small- and wide-angle X-ray scattering (S/WAXS) and solid-state nuclear magnetic resonance (ssNMR) to probe the structure and dynamics of lung-mimetic multilamellar bodies (MLBs) in the presence of Ca 2+ and CL. We conjecture that CL overexpressed in the hypophase of alveoli strongly affects the structure of lung-lipid bilayers and their stacking in the MLBs. Specifically, S/WAXS data revealed that CL induces significant shrinkage of the water-layer separating the concentric bilayers in multilamellar aggregates. ssNMR measurements indicate that this interbilayer tightening is due to undulation repulsion damping as CL renders the glycerol backbone of the membranes significantly more static. In addition to MLB dehydration, CL promotes intrabilayer phase separation into saturated-rich and unsaturated-rich lipid domains that couple across multiple layers. Expectedly, addition of Ca 2+ screens the electrostatic repulsion between negatively charged lung membranes. Furthermore, when CL is present, addition of Ca 2+ results in an apparent interbilayer expansion likely due to local structural defects. Combining S/WAXS and ssNMR on systems with compositions pertinent to healthy and unhealthy lung membranes, we propose how alteration of the physiochemical properties of MLBs can critically impact the breathing cycle.

59 BASIC BIOLOGICAL SCIENCES↗

Picosecond Ultrasonics in Magnetic Topological Insulator MnBi 2 Te 4

MnBi 2 Te 4 is a magnetic topological insulator with layered A-type antiferromagnetic order. It exhibits a rich layer- and magnetic-state dependent topological phase diagram; however, much about the coupling between spin, charge, and lattice remains to be explored. Here, in this work, we report that MnBi 2 Te 4 is an excellent acoustic phonon cavity by realizing phonon frequency combs using picosecond ultrasonics. With the generated acoustic phonon wavepackets, we demonstrate that the timing and phase of acoustic echoes can be used to detect the presence of stacking faults between van der Waals layers buried deep within the crystal. Furthermore, by implementing this nondestructive ultrafast optical measurement in conjunction with time-resolved magneto-optical Kerr effect experiments, we uncover that out-of-plane vibrations in MnBi 2 Te 4 do not couple to the magnetic order, i.e. there is no appreciable magnetostriction. Our work points out how a well-developed technique can probe the structural defects and phonon pulse engineering in layered topological insulators.

36 MATERIALS SCIENCE↗