Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Functioning Mechanism of AlF 3 Coating on the Li- and Mn-Rich Cathode Materials

We report systematic studies of the microstructural changes of uncoated and AlF3-coated Li-rich Mn-rich (LMR) cathode materials (Li1.2Ni0.15Co0.10Mn0.55O2) before and after cycling using a combination of aberration-corrected scanning/transmission electron microscopy (S/TEM) and electron energy loss spectroscopy (EELS). TEM coupled with EELS provides detailed information about the crystallographic and electronic structure changes that occur after cycling, thus revealing the fundamental improvement mechanism of surface coating. The results demonstrate that the surface coating reduces oxidation of the electrolyte at high voltage, suppressing the accumulation of a thick solid electrolyte interface (SEI) layer on electrode particle surface. Surface coating significantly enhances the stability of the surface structure and protects the electrode from severe etching/corrosion by the acidic species in the electrolyte, reducing the formation of etched surfaces and corrosion pits. Moreover, surface coating alleviates the undesirable voltage fade by mitigating layered to spinel-like phase transformation in the bulk region of the material. These fundamental findings may also be widely applied to explain the functioning mechanisms of other surface coatings used in a broad range of electrode materials.

Zheng, Jianming↗

Improving Stability of an Optical Fiber pH Sensor with a Calcined Polyethylenimine-Coating at High Pressures and Temperatures

With an increased interest in subsurface gas storage technology for various energy applications, monitoring wellbore structural stability and subsurface geochemistry has become more pressing, and pH is a key parameter to measure. As high pressure and elevated temperatures in subsurface conditions are comparatively harsh relative to that expected for most standard pH sensor designs, any pH monitoring hardware must be designed for extended exposure to high pressures and temperatures. We previously reported that an optical fiber pH sensor functionalized with a calcined polyethylenimine coating had shown some promise as a high temperature and pressure pH sensor but with some drifting when operating for longer than 8 hours. In this paper, we investigated the coating composition and potential cause of the drifting and improved the stability of the prepared coating to minimize sensor drift under simulated wellbore conditions. Scanning electron microscopy (SEM) had previously shown moderate cracking at high pressures over short tests. By applying X-ray photoelectron spectroscopy (XPS) to characterize the sensor coating before and after one week of testing in an H2/CH4 gas blend at 80 °C and 900 psi, a compositional change in the coating was observable, which may indicate susceptibility to alteration by subsurface gas storage conditions. Non-reducing (CH4, N2) environments were also tested, and confirmed that both temperature and pressure were also contributing to the drift.

energy infrastructure↗

Improving Stability of an Optical Fiber pH Sensor with a Calcined Polyethylenimine-Coating at High Pressures and Temperatures

With an increased interest in subsurface gas storage technology for various energy applications, monitoring wellbore structural stability and subsurface geochemistry has become more pressing, and pH is a key parameter to measure. As high pressure and elevated temperatures in subsurface conditions are comparatively harsh relative to that expected for most standard pH sensor designs, any pH monitoring hardware must be designed for extended exposure to high pressures and temperatures. We previously reported that an optical fiber pH sensor functionalized with a calcined polyethylenimine coating had shown some promise as a high temperature and pressure pH sensor but with some drifting when operating for longer than 8 hours. In this paper, we investigated the coating composition and potential cause of the drifting and improved the stability of the prepared coating to minimize sensor drift under simulated wellbore conditions. Scanning electron microscopy (SEM) had previously shown moderate cracking at high pressures over short tests. By applying X-ray photoelectron spectroscopy (XPS) to characterize the sensor coating before and after one week of testing in an H2/CH4 gas blend at 80°C and 900 psi, a compositional change in the coating was observable, which may indicate susceptibility to alteration by subsurface gas storage conditions. Non-reducing (CH4, N2) environments were also tested, and confirmed that both temperature and pressure were also contributing to the drift.

energy infrastructure↗

Stability and equation of state of a nanocrystalline Ga-Ge mullite in a vitroceramic composite: A synchrotron x-ray diffraction study

Synchrotron x-ray diffraction and diamond anvil cell techniques were used to characterize the phase transformations and to evaluate the structural stability at elevated pressures of a developed nanocrystalline composite. The optically transparent material was built of a germanium oxide-based amorphous host matrix with homogeneously dispersed 13{+-}3 nm Ga-Ge mullite-type nanocrystals, which had a structure similar to the conventional Al{sub 2}O{sub 3}-SiO{sub 2} mullite. The equation of state of the nanocrystals and the overall structural integrity of the nanocomposite were investigated in quasihydrostatic conditions on compression to 36 GPa and on the following decompression to ambient conditions. The overall pressure-induced changes of x-ray diffraction patterns evidenced that the structural integrity of the material is well preserved up to about 14-16 GPa. The nanocomposite decompressed from 36 GPa to ambient pressure showed a very limited reversibility of the pressure-driven changes. A Birch-Murnaghan fit of the unit cell volume as a function of pressure yielded a zero-pressure bulk modulus, K{sub 0}, for the nanocrystalline phase of 229(15) GPa which makes this material potentially interesting for structural applications at elevated pressures.

36 MATERIALS SCIENCE↗

Intralattice-bonded phase-engineered ultrahigh-Ni single-crystalline cathodes suppress strain evolution

Single crystallization remains a debated strategy for advancing Ni-rich cathode materials. While it mitigates particle cracking and improves tap density by eliminating particle boundaries, extended diffusion pathways introduce volumetric and lattice distortions, compromising electrochemical and structural stability. These challenges hinder the commercialization of high-Ni single-crystal cathodes, calling for a reassessment of their viability. Here, in this study, we report a structural design: intralattice-bonded phase single-crystal LiNi 0.92 Co 0.03 Mn 0.05 O 2 (IBP-SC92). This architecture maintains structural integrity while shortening diffusion pathways, resulting in almost zero electrochemical degradation during cycling. The robust structure and fast ion transport mitigate lattice strain, as confirmed by multiscale high-resolution diffraction and imaging techniques, preventing intragranular cracks and irreversible phase transitions. As a result, IBP-SC92 shows outstanding cycling stability, with nearly 100% capacity retention after 100 cycles in half cells and 94.5% retention after 1,000 cycles in full cells. This redefined single-crystal cathode represents a significant step towards the industrial adoption of high-energy-density materials.

36 MATERIALS SCIENCE↗

Molecular simulation of mineral surfaces and the role of impurities on surface stability

Molecular simulation techniques represent a powerful complement to experiment for studying the surfaces and interfaces of minerals, not least because we can easily visualize the surface processes. The aim of this presentation is to describe recent work using molecular simulation methods to model the structure, stability and reactivity of mineral surfaces and how the simulation of these properties can be used to predict morphologies. Initially, we will describe how molecular simulation techniques can be used to give a reliable description of the surfaces. One of the significant contributions that atom-based simulation methods can make is in the investigation of competitive adsorption of impurities at surfaces and several examples are shown. Finally, two approaches for increasing the scope and reliability of the simulations are discussed, namely, electronic structure calculations, which enable us to explore the mineral surface stoichiometry and potential-based molecular dynamics simulations, which introduce dynamical contribution to the surface processes and hence allows for detailed characterization of the mineral-water interface.

58 GEOSCIENCES↗

Thermal and electrochemical behavior of Cu{sub 4−x}Li{sub x}S{sub 2} (x=1, 2, 3) phases

Several compositions of the Cu{sub 4−x}Li{sub x}S{sub 2} (x=1, 2, 3) series were synthesized via solid-state reaction of the elements. The structural stability at various temperatures and the effect of Li:Cu ratio on the thermal conductivity and the electrochemical performance of Cu{sub 4−x}Li{sub x}S{sub 2}/Li half-cells during charge–discharge process were investigated. Differential scanning calorimetry (DSC) measurements showed a sharp endothermic peak at 140 °C for Cu{sub 4−x}Li{sub x}S{sub 2} samples with x=1 and 2, which is ascribed to a structural phase transition. X-ray diffraction (XRD) measurements on various Cu{sub 4−x}Li{sub x}S{sub 2} samples at temperatures below and above 140 °C indicated a structural phase transition from the room temperature low-symmetry structure to the high temperature cubic structure of Cu{sub 2}S. The thermal conductivity of Cu{sub 4−x}Li{sub x}S{sub 2} samples decreases with decreasing Cu:Li ratio and with increasing temperature. The thermal conductivity of Cu{sub 4−x}Li{sub x}S{sub 2} samples at room temperature decreases from 1.2 W/m K for Cu:Li=3:1 to 0.7 W/m K for Cu:Li=1:3. Cyclic voltammetry of Cu{sub 4−x}Li{sub x}S{sub 2}/Li half-cells showed that high discharge capacity (165 mA h g{sup −1}) and stable reversible charge–discharge process is observed for Cu:Li=2:2, whereas other Cu:Li ratios lead to low discharge capacity and poor reversibility. The electrochemical behavior of Cu{sub 4−x}Li{sub x}S{sub 2}/Li half-cells is rationalized by taking into account the competing reactions of Li{sup +} ions with CuS and Cu{sub 2}S during discharge. - Graphical abstract: Tuning Li content in Cu{sub 4−x}Li{sub x}S{sub 2}/Li half-cells to maintain a Cu/Li ratio equal to unity affords maximum capacity and high stability of the charge–discharge process. - Highlights: • Cu:Li ratio strongly influenced crystal structure and properties of Cu{sub 4-x}Li{sub x}S{sub 2}. • Compositions with x = 1 and 2 undergo structural transformation at above 140 °C. • Thermal conductivity of Cu{sub 4-x}Li{sub x}S{sub 2} phases increases with decreasing Cu:Li ratio. • Stability of Cu{sub 4-x}Li{sub x}S{sub 2}/Li half-cells decreases with Cu:Li ratio. • Initial charge capacity of Cu{sub 4-x}Li{sub x}S{sub 2}/Li half-cells increases with Cu:Li ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Cr-rich Cr-Sb multilayer films: Syntheses of a new metastable phase using modulated elemental reactants

The new metastable compound Cr{sub 1+x}Sb with x up to 0.6 has been prepared via a thin film approach using modulated elemental reactants and investigated by in-situ X-ray reflectivity, X-ray diffraction, differential scanning calorimetry, energy dispersive X-ray analysis as well as transmission electron microscopy and atomic force microscopy. The new Cr-rich antimonide crystallizes in a structure related to the Ni{sub 2}In-type structure, where the crystallographic position (1/3, 2/3, 3/4) is partially occupied by excess Cr. The elemental layers of the pristine material interdiffused significantly before Cr{sub 1+x}Sb crystallized. A change in the activation energy was observed for the diffusion process when crystal growth starts. First-principles electronic structure calculations provide insight into the structural stability, magnetic properties and resistivity of Cr{sub 1+x}Sb. - Graphical abstract: 1 amorphous multilayered film 2 interdiffused amorphous film 3 metastable crystalline phase 4 thermodynamic stable phase (and by-product). - Highlights: • Interdiffusion of amorphous Cr and Sb occurs before crystallization. • Crystallization of a new metastable phase Cr{sub 1.6}Sb in Ni{sub 2}In-type structure. • The new Cr-rich phase shows half-metallic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deciphering Chemical/Electrochemical Compatibility of Li 3 InCl 6 in 5.2 V High-Voltage LiCoO 2 All-Solid-State Batteries

Large interfacial resistance is a widely recognized impediment to the advancement of high-voltage, all-solid-state batteries. However, a comprehensive understanding of the fundamental cause behind the interfacial resistance between solid electrolytes and typical layered oxide cathodes has not yet been achieved. Here, we investigated the high-voltage stability of Li 3 InCl 6 and elucidated the underlying interfacial electrochemical reactions between LiCoO 2 and Li 3 InCl 6 . Further, the pairing of Li 3 InCl 6 with LiCoO 2 exhibited a superior capacity retention of 73.6% even at 5.2 V, much higher than 28.2% charged at 4.6 V in lithium-ion batteries after 70 cycles. The enhanced high-voltage stability of ASSBs is attributed to the stable interface formed between LiCoO 2 and Li 3 InCl 6 and the reinforced surface and bulk structure stability. On the other hand, the ultrahigh voltage still causes the partial decomposition of Li 3 InCl 6 and generates interfacial compounds such as InClO and cobalt and indium chlorides/oxides.

25 ENERGY STORAGE↗

Diagonally implicit Runge–Kutta schemes: Discrete energy-balance laws and compactness properties

Abstract We study diagonally implicit Runge–Kutta (DIRK) schemes when applied to abstract evolution problems that fit into the Gelfand-triple framework. We introduce novel stability notions that are well-suited to this setting and provide simple, necessary and sufficient, conditions to verify that a DIRK scheme is stable in our sense and in Bochner-type norms. We use several popular DIRK schemes in order to illustrate cases that satisfy the required structural stability properties and cases that do not. In addition, under some mild structural conditions on the problem we can guarantee compactness of families of discrete solutions with respect to time discretization.

Mathematics↗

Ultrastable Structure and Luminescence Properties of Y2O3 Nanotubes

Pure and Eu-doped Y{sub 2}O{sub 3} nanotubes (NTs) were synthesized by a hydrothermal method. The crystal structure of synthesized pure and Eu-doped Y{sub 2}O{sub 3} NTs are respectively stable to 22 and 18.3 GPa, which are about 10 GPa higher than bulk Y{sub 2}O{sub 3}. Phase transformation routes of Y{sub 2}O{sub 3}NTs are cubic {yields} amorphous directly instead of cubic {yields} monoclinic {yields} hexagonal of bulk Y{sub 2}O{sub 3}. Due to the doped Eu{sup 3+} ions, the Eu-doped Y{sub 2}O{sub 3} has larger cell parameters, lower phase transformation pressure, and smaller bulk modulus compared to pure Y{sub 2}O{sub 3} NTs. The much elevated structural stability of the Eu-doped Y{sub 2}O{sub 3} NTs, which is attributed to the size-induced high energy kinetic hindrance, leads to an ultrastable luminescence. Such a novel property of Eu-doped Y{sub 2}O{sub 3} NTs is expected to play a significant role in high-stability nano-photo-devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic structure and crystal phase stability of palladium hydrides

The results of electronic structure calculations for a variety of palladium hydrides are presented. The calculations are based on density functional theory and used different local and semilocal approximations. The thermodynamic stability of all structures as well as the electronic and chemical bonding properties are addressed. For the monohydride, taking into account the zero-point energy is important to identify the octahedral Pd-H arrangement with its larger voids and, hence, softer hydrogen vibrational modes as favorable over the tetrahedral arrangement as found in the zincblende and wurtzite structures. Stabilization of the rocksalt structure is due to strong bonding of the 4d and 1s orbitals, which form a characteristic split-off band separated from the main d-band group. Increased filling of the formerly pure d states of the metal causes strong reduction of the density of states at the Fermi energy, which undermines possible long-range ferromagnetic order otherwise favored by strong magnetovolume effects. For the dihydride, octahedral Pd-H arrangement as realized, e.g., in the pyrite structure turns out to be unstable against tetrahedral arrangement as found in the fluorite structure. Yet, from both heat of formation and chemical bonding considerations, the dihydride turns out to be less favorable than the monohydride. Finally, the vacancy ordered defect phase Pd{sub 3}H{sub 4} follows the general trend of favoring the octahedral arrangement of the rocksalt structure for Pd:H ratios less or equal to one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manganese‐Based Spinel Cathodes: A Promising Frontier for Solid‐State Lithium‐Ion Batteries

Recently, all-solid-state lithium-ion batteries (ASSLIBs), which exhibit improved safety and enhanced energy density compared to conventional commercialized lithium-ion batteries (LIBs), thereby have garnered extensive research interest. Among the promising cathode candidates, Mn-based spinel cathodes LiMn 2 O 4 (LMO) and LiNi 0.5 Mn 1.5 O 4 (LNMO), with the unique characteristics of low cost, structural stability, and 3D Li-ion diffusion channels, have demonstrated excellent performance in LIBs and presented great potential in ASSLIBs applications. However, several challenges, including structural degradations, poor interfacial contact, large interfacial resistance, and Mn-dissolution/diffusion during the electrochemical cycling, hinder their practical applications and commercialization in the ASSLIBs. Particularly, the high-voltage LNMO cathodes suffer from the challenge of electrochemical incompatibility with most of the solid-state electrolytes (SSEs). Herein, the spinel structure, the electrochemical behavior, and the structural degradation of the LMO/LNMO are explored. The characteristics and recent progress of the mitigating strategies to the challenges of various SSEs, including polymer-, oxide-, composite-, sulfide-, halide-, and LiPON-based SSEs, are introduced when paired with LMO/LNMO. Finally, the directions for future research to advance Mn-based spinel cathodes and fulfill the requirements of the next-generation ASSLIBs are also discussed.

Dou, Yu [Concordia University, Montreal, QC (Canad↗

Controlling the defects and transition layer in SiO 2 films grown on 4 H -SiC via direct plasma-assisted oxidation

The structural stability and electrical performance of SiO 2 grown on SiC via direct plasma-assisted oxidation were investigated. To investigate the changes in the electronic structure and electrical characteristics caused by the interfacial reaction between the SiO 2 film (thickness ~ 5 nm) and SiC, X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), density functional theory (DFT) calculations, and electrical measurements were performed. The SiO 2 films grown via direct plasma-assisted oxidation at room temperature for 300s exhibited significantly decreased concentrations of silicon oxycarbides (SiO x C y ) in the transition layer compared to that of conventionally grown (i.e., thermally grown) SiO 2 films. Moreover, the plasma-assisted SiO 2 films exhibited enhanced electrical characteristics, such as reduced frequency dispersion, hysteresis, and interface trap density ( D it ≈ 10 11 cm -2 · eV -1 ). In particular, stress induced leakage current (SILC) characteristics showed that the generation of defect states can be dramatically suppressed in metal oxide semiconductor (MOS) structures with plasma-assisted oxide layer due to the formation of stable Si-O bonds and the reduced concentrations of SiO x C y species defect states in the transition layer. That is, energetically stable interfacial states of high quality SiO 2 on SiC can be obtained by the controlling the formation of SiO x C y through the highly reactive direct plasma-assisted oxidation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monoxides of small terbium clusters: A density functional theory investigation

To investigate the effect of oxygen atom on the geometrical structures, electronic, and magnetic properties of small terbium clusters, we carried out the first-principles calculations on Tb{sub n}O (n = 1-14) clusters. The capping of an oxygen atom on one trigonal-facet of Tb{sub n} structures is always favored energetically, which can significantly improve the structural stability. The far-infrared vibrational spectroscopies are found to be different from those of corresponding bare clusters, providing a distinct signal to detect the characteristic structures of Tb{sub n}O clusters. The primary effect of oxygen atom on magnetic properties is to change the magnetic orderings among Tb atoms and to reduce small of local magnetic moments of the O-coordinated Tb atoms, both of which serve as the key reasons for the experimental magnetic evolution of an oscillating behavior. These calculations are consistent with, and help to account for, the experimentally observed magnetic properties of monoxide Tb{sub n}O clusters [C. N. Van Dijk et al., J. Appl. Phys. 107, 09B526 (2010)].

74 ATOMIC AND MOLECULAR PHYSICS↗

X-ray photoelectron spectroscopy and ion dynamics study of W6+ doped La2Mo2O9 as SOFC electrolyte

Highlights: • Stabilization of high temperature cubic phase of La{sub 2}Mo{sub 2}O{sub 9} at room temperature by W doping. • Intra-granular pore formation in the material under reducive atmosphere. • X-ray photoelectron spectroscopic study of W doped La{sub 2}Mo{sub 2}O{sub 9} both in air and reducive atmosphere. • Partial stabilization of Mo{sup 6+} state in La{sub 2}Mo{sub 2}O{sub 9} upon W doping in reducive atmosphere. • Ion dynamics and conductivity studies for oxide ion transport. - Abstract: The structural stability of La{sub 2}Mo{sub 2-x}W{sub x}O{sub 9} is well reported by many researchers but its studies on photoelectron spectroscopy, structural behaviour in Ar-H{sub 2} (reducing) atmosphere and ion dynamics are rarely reported. Here we report for the first time, to the best of authors’ knowledge, the above studies for W-doped La{sub 2}Mo{sub 2}O{sub 9} compounds. La{sub 2}Mo{sub 2}O{sub 9} doped with W{sup 6+} over the range of 0.25 ≤ x ≤ 1.75 at Mo{sup 6+} site is synthesised by solid-state reaction route. The x-ray diffraction studies show that at x = 0.5 the lattice parameter of the unit cell starts decreasing as a consequence of decrease in bond length between various elements present in the compound. The XPS analysis shows that Mo in La{sub 2}Mo{sub 2-x}W{sub x}O{sub 9} is very much sensitive to reduction. The temperature dependent a.c. impedance spectroscopy study of La{sub 2}Mo{sub 2-0.5}W{sub 0.5}O{sub 9} has been reported over the temperature range up to 653 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural study of Fe (II) adsorption on hematite (1102)

The structure of {alpha}-Fe{sub 2}O{sub 3}(1{bar 1}02) reacted with Fe(II) under anoxic conditions was studied using crystal truncation rod (CTR) diffraction. The CTR results show the crystalline termination of {alpha}-Fe{sub 2}O{sub 3}(1{bar 1}02) is modified due to adsorption of Fe(II) at crystallographic lattice sites. In addition, the binding sites for adsorbed Fe are similar for all studied conditions: reaction for 2 h at pH 5.0, for 34 d at pH 5.0, and for 5.5 h at pH 7.0. The occupancy of adsorbed Fe increases with both reaction time and pH, which is consistent with typical cation adsorption behavior on iron (hydr)oxide surfaces. The metal-oxygen bond lengths of the (ordered) surface Fe atoms are characteristic of Fe(III), which provides indirect evidence for oxidation of adsorbed Fe(II) and is consistent with recent studies indicating that Fe(III)-hydroxides are effective oxidants for dissolved ferrous iron. Grazing-incidence X-ray diffraction measurements indicate that no crystalline surface reaction products formed during the course of Fe(II) reaction. Overall, the structural characterization of the Fe(II) adsorption reaction results in an enhanced understanding of how reduced iron affects the structure, stability and reactivity of hematite.

58 GEOSCIENCES↗