Search NASA⌕ Search

SEARCH · Search NASA

Results for “study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Study of carbon dioxide adsorption on a Cu-nitroprusside polymorph

A careful structural characterization was carried out to unequivocally determine the structure of the synthesized material. The TGA, DRIFTS and a Pawley fitting of the XRD powder profiles indicate that the hydrated and in situ dehydrated polymorph crystallizes in the orthorhombic space group Pnma. Meanwhile, the CO{sub 2} isosteric heat of adsorption appears to be independent of loading with an average value of 30 kJ/mol. This translates to a physisorption type interaction, where the adsorption energy corresponding to wall and lateral interactions are mutually compensated to produce, an apparently, homogeneous adsorption energy. The somewhat high adsorption energy is probably due to the confinement of the CO{sub 2} molecules in the nitroprusside pores. Statistical Physics and the Dubinin theory for pore volume filling allowed model the CO{sub 2} equilibrium adsorption process in Cu-nitroprusside. A DRIFTS test for the adsorbed CO{sub 2} displayed a peak at about 2338 cm{sup -1} that was assigned to a contribution due to physical adsorption of the molecule. Another peak found at 2362 cm{sup -1} evidenced that this molecule interacts with the Cu{sup 2+}, which appears to act as an electron accepting Lewis acid site. The aim of the present paper is to report a Pnma stable Cu-nitroprusside polymorph obtained by the precipitation method that can adsorb carbon dioxide. -- Graphical abstract: The adsorption space of a very well characterized Cu-nitroprusside polymorph, applying carbon dioxide as probe molecule, was studied. Display Omitted Highlights: {yields} Accurate information about the geometry of the adsorption space was provided. {yields} Truthful data about the interactions within the adsorption space was presented. {yields} The structure of the tested Cu-NP polymorph was established. {yields} Was evidenced adsorbed CO{sub 2} molecules in the form of weakly bonded adducts. {yields} Is proposed that adsorbed molecules could change the Cu-NP magnetic properties.

36 MATERIALS SCIENCE↗

Toward a better understanding of the magnetocaloric effect: An experimental and theoretical study of MnFe{sub 4}Si{sub 3}

The intermetallic compound MnFe{sub 4}Si{sub 3} has been studied by high-resolution Time of Flight (TOF) neutron powder diffraction. MnFe{sub 4}Si{sub 3} crystallizes in the hexagonal space group P6{sub 3}/mcm with lattice constants of a=b=6.8043(4) Å and c=4.7254(2) Å at 310 K. Magnetic susceptibility measurements show clearly the magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. Magnetic structure refinements based on neutron powder diffraction data with and without external magnetic field reveal strong evidence on the origin of the large magnetocaloric effect (MCE) in this material as a partial reordering of the spins between ∼270 K and 300 K. In addition, electronic structure calculations using the self-consistent, spin-polarized Tight Binding-Linear MuffinTin Orbital (TB-LMTO) method were also accomplished to address the “coloring problem” (Mn/Fe site preference) as well as the unique ferromagnetic behavior of this intermetallic compound. - Graphical abstract: Theoretical and experimental reinvestigation of the magnetic structure of MnFe{sub 4}Si{sub 3} for a better understanding of its large magnetocaloric effect (MCE). - Highlights: • Strong magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. • MCE associated to a partial reordering of the spins between ∼270 K and 300 K. • DFT calculations show strong relation between MCE and spintronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation of Tungsten Oxidation Studied by In Situ Environmental TEM

In this study, in situ environmental transmission electron microscopy (ETEM) was applied, for the first time, to investigate the thermal oxidation of a pristine and a self-ion irradiated polycrystalline tungsten, using a MEMS-based gas cell at 500 oC to 900 oC in a 1 bar 2%O2/N2 gas mixture. By tracking the dynamic evolution of the tungsten oxide scale as it initiates, grows, and sublimates during a consecutive thermal oxidation experiment, we observed two distinctive tungsten oxide microstructure – one nanocrystalline o-WO3 scale grown on W{27-1 } and W{1-1 8} and another o-WO3 scale exhibits a novel highly textured nanostructure. While the two oxide microstructures shared a similar thickness of ~200 nm after 40-minute early-stage oxidation, the nanocrystalline scale on the W{27-1 } grew much more rapidly at 800 oC than the highly textured oxide at a higher temperature of 900 oC. This suggests both the microstructure of these tungsten oxide scales as well as their oxidation kinetics are highly sensitive to the tungsten surface orientation, and such correlations also change dynamically in the course of oxidation. We also discuss the tungsten oxidation mechanism, the effects of the TEM foil thickness, and the focused ion beam (FIB) Ga+ damage on in situ ETEM oxidation.

In situ ETEM, Tungsten, Thermal oxidation, Orienta↗

Electrochemical studies on polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) membranes prepared by electrospinning and phase inversion-A comparative study

The synthesis, characterization and electrochemical properties of poly(vinylidene fluoride-co-hexafluoropropylene) {l_brace}P(VdF-co-HFP){r_brace} prepared by electrospinning and phase inversion methods are reported. The morphologies of the membranes were studied by field emission scanning electron microscope and atomic force microscope. Thermal properties of the membranes were evaluated by differential scanning calorimetry. The resultant porous membranes are good absorbents of liquid electrolytes and exhibit high electrolyte retention capacity. The polymer electrolytes were prepared by soaking the membranes in liquid electrolyte. The temperature dependent ionic conductivity and electrochemical properties were evaluated. Li/LiFePO{sub 4} cell with electrospun membrane delivers a discharge capacity of 145 mAh/g, which corresponds to 85% utilization of active material under the test conditions and shows lower capacity fade under continuous cycling.

36 MATERIALS SCIENCE↗

Effect of Cu2+ Activation on Interfacial Water Structure at the Sphalerite Surface as Studied by Molecular Dynamics Simulation

In the first part of this paper, an experimental contact angle study of the fresh and Cu2+ activated sphalerite-ZnS surface as well as the covellite-CuS (001) surface is reported describing the increased hydrophobic character of the surface during Cu2+ activation. In addition to these experimental results, the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite- CuS2 (100), and covellite-CuS (001) surfaces were examined using Molecular Dynamics Simulation (MDS). Our MDS results on the behavior of interfacial water at the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite-CuS2 (100), and covellite-CuS (001) surfaces include simulated contact angles, water number density distribution, water dipole orientation, water residence time, and hydrogen-bonding considerations. The copper content at the Cu2+ activated sphalerite surface seems to account for the increased hydrophobicity as revealed by both experimental and MD simulated contact angle measurements. The relatively greater hydrophobic character developed at the Cu2+ activated sphalerite surface and at the copper-zinc sulfide surface has been described by MDS, based on the structure of interfacial water and its dynamic properties. L.X.D. acknowledges funding from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

Jin, Jiaqi↗

Numerical study and test of the APS linac transverse deflecting cavity

The transverse deflecting cavity can be used to transform particle distributions in the 6D phase space, which makes it a promising component in phase space beam diagnostics and beam manipulations. In the Advanced Photon Source (APS) Linac, a LOLA-type traveling wave deflecting cavity was installed for the diagnostics of beam characteristics, such as the bunch length, bunch temporal profile, time-dependent energy spread and slice (time-correlated) transverse emittance. In this paper, this deflecting cavity is modeled and analyzed with the numerical method. The effects of the center cell and coupler cell dimensions on the performance of the whole structure are studied, which shows the coupler cell radius has a dominant effect over the coupler cell length and slot width on the global reflection coefficient and field flatness. Important RF parameters, such as S-11, field flatness and phase advance etc., of the LOLA-II cavity in tuning are calculated and discussed. After optimization, the field flatness of the cavity is 2.1%, the phase advance is 119.66 degrees degrees with a standard deviation smaller than 0.5 degrees and the bandwidth is 15.738 MHz when VSWR < 1.1 (i.e. the S-11, < -26 dB). Bead-pull measurements and RF conditioning have been also performed and discussed. Finally, the initial cavity commissioning with electron beam of 375 MeV is reported, and compared with simulation.

coupler↗

Recent Quarkonium Studies from the PHENIX Experiment

Quarkonia suppression in nucleus-nucleus collisions is a powerful tool to probe the density and temperature of the medium created in heavy ion collisions. Forward rapidity measurements in p(d)+Au collisions are essential to understand how quarkonia states are affected by initial state effects, formation time, and local particle multiplicity. Earlier measurements in Au+Au collisions showed a stronger suppression of forward J/Ψ compared to mid-rapidity results, indicating the possibility of a smaller contribution of regenerated quarkonia states at forward rapidity. These proceedings report on the latest quarkonia studies performed by the PHENIX collaboration in the rapidity range 1:2 < |y| < 2:2.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental and theoretical studies of laser-induced breakdown spectroscopy emission from iron oxide: Studies of atmospheric effects

In this paper, we report on a comprehensive study of the emission spectra from laser-induced breakdown spectroscopy (LIBS) measurements on iron oxide. Measurements have been made of the emission from Fe 2 O 3 under atmospheres of air, He, and Ar, and at different atmospheric pressures. The effect of varying the time delay of the measurement is also explored. Theoretical calculations were performed to analyze the plasma conditions and find that a reasonably consistent picture of the change in plasma temperature and density for different atmospheric conditions can be reached. We also investigate the sensitivity of the OI 777 nm emission lines to the plasma conditions, something that has not been explored in detail in the previous work. In conclusion, we also show that LIBS can be used to differentiate between FeO and Fe 2 O 3 by examining the ratio of the intensities of selected Fe emission to O emission lines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗