Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Complementary Effects of Mg and Cu Incorporation in Stabilizing the Cobalt-Free LiNiO 2 Cathode for Lithium-Ion Batteries

Since the discovery of LiNiO 2 several decades ago, a new era of electric vehicles demanding high-energy-density lithium-ion batteries (LIBs) has recently rebooted the interest in this cathode material to eliminate the dependence on expensive and scarcely available cobalt. However, LiNiO 2 has been plagued by cycle instability, thermal instability, and air instability. We present here an exploration of the mutual interaction of magnesium and copper in stabilizing the cobalt-free LiNiO 2 cathode. Although Mg doping is beneficial for the robustness of the bulk structure of LiNiO 2 , surface characterization results of Mg-doped LiNiO 2 implies the need for further surface protection. To that end, we have incorporated Cu in addition to Mg in that Cu stabilizes the surface of Mg-doped LiNiO 2 by forming a protective stable surface layer without harming the bulk. Notable variations of the surface residual lithium composition (Li Li 2 CO 3 /Li LiOH ) along with the incorporation of stabilizers are also discussed. The harmony between Mg and Cu with as little as 0.5 atom % Mg and 0.3 atom % Cu significantly enhances the specific energy and cycle life of LiNiO 2 . Furthermore, this study demonstrates how the co-incorporation of optimal dopants can help stabilize both the bulk and surface and provides new insights toward developing cobalt-free layered oxide cathodes for high-energy-density LIBs.

25 ENERGY STORAGE↗

Enhanced laser-induced damage performance of all-glass metasurfaces for energetic pulsed laser applications

To fabricate optical components with surface layers compatible with high power laser applications that may operate as antireflective coatings, polarization rotators, or harness physical anisotropy for other uses, metasurfaces are becoming an appealing candidate. In this study, a large-beam (1.05 cm diameter) 351-nm laser-induced damage testing was done on an all-glass metasurface structure composed of cone-like features with a subwavelength spacing of adjacent features. These structures were fabricated on untreated fused silica glass and damage tested, as were structures that were fabricated on fused silica glass that experienced a preliminary etching process to remove the surface Beilby layer that is characteristic of polished fused silica. The laser-induced damage onset for structures on untreated fused silica glass was 19.3 J∙cm -2 , while the sample that saw an initial pretreatment etch exhibited an improved damage onset of 20.4 J∙cm -2 , only 6% short of the reference pretreated glass damage onset of 21.7 J∙cm -2 . For perspective, the National Ignition Facility (NIF) operational average fluence at this wavelength and pulse length is about 10 J/cm2. At a fluence of 25.5 J∙cm -2 , the reference (pretreated) fused silica initiated 5.2 damage sites per mm 2 , while the antireflective metasurface sample with a preliminary etching process treatment initiated 9.8 damage sites per mm 2 . In conclusion, these findings demonstrate that substrate-engraved metasurfaces are compatible with high energy and power laser applications, further broadening their application space.

36 MATERIALS SCIENCE↗

Analysis of the separated boundary layer flow on the surface and in the wake of blunt trailing edge airfoils

The viscous flow phenomena associated with sharp and blunt trailing edge airfoils were investigated. Experimental measurements were obtained for a 17 percent thick, high performance GAW-1 airfoil. Experimental measurements consist of velocity and static pressure profiles which were obtained by the use of forward and reverse total pressure probes and disc type static pressure probes over the surface and in the wake of sharp and blunt trailing edge airfoils. Measurements of the upper surface boundary layer were obtained in both the attached and separated flow regions. In addition, static pressure data were acquired, and skin friction on the airfoil upper surface was measured with a specially constructed device. Comparison of the viscous flow data with data previously obtained elsewhere indicates reasonable agreement in the attached flow region. In the separated flow region, considerable differences exist between these two sets of measurements.

Goradia, S. H.↗

Features of molecular-beam epitaxy and structural properties of AlInSb-based heterostructures

AlInSb layers are grown on highly lattice-mismatched GaAs (100) substrates by molecular-beam epitaxy (MBE) and studied in situ by reflection high-energy electron diffraction and ex situ by scanning and transmission electron microscopy (SEM and TEM). It is shown that one feature of AlInSb/GaAs heterostructure features is a high probability of forming microtwins; methods for decreasing their concentration are proposed. To initiate AlInSb growth on GaAs substrates under high lattice-mismatch ({approx}14.5%) conditions and to stimulate the transition to 2D growth, the GaAs layer surface was preliminarily exposed to an antimony flux followed by deposition of an intermediate AlSb buffer layer. The optimization of initial MBE growth stages of Sb-containing layers on the GaAs surface allows a decrease in the defect density in the GaAs/AlInSb heterostructures more than by two orders of magnitude, including a drastic decrease in the microtwin density. Optimal MBE growth conditions for Al{sub x}Al{sub 1-x}Sb are determined in a wide composition range (0 < x < 0.3). The TEM and SEM studies confirm the high structural quality of grown GaAs/AlInSb heterostructures. Hall-effect measurements showed the dependence of the carrier mobility and concentration on the aluminum content in AlInSb layers and allowed preliminary conclusions on scattering mechanisms.

36 MATERIALS SCIENCE↗

An Inversion of Gravity and Topography for Mantle and Crustal Structure on Mars

Analysis of the gravity and topography of Mars presently provides our primary quantitative constraints on the internal structure of Mars. We present an inversion of the long-wavelength (harmonic degree less than or equal to 10) gravity and topography of Mars for lateral variations of mantle temperature and crustal thickness. Our formulation incorporates both viscous mantle flow (which most prior studies have neglected) and isostatically compensated density anomalies in the crust and lithosphere. Our nominal model has a 150-km-thick high-viscosity surface layer over an isoviscous mantle, with a core radius of 1840 km. It predicts lateral temperature variations of up to a few hundred degrees Kelvin relative to the mean mantle temperature, with high temperature under Tharsis and to a lesser extent under Elysium and cool temperatures elsewhere. Surprisingly, the model predicts crustal thinning beneath Tharsis. If correct, this implies that thinning of the crust by mantle shear stresses dominates over thickening of the crust by volcanism. The major impact basins (Hellas, Argyre, Isidis, Chryse, and Utopia) are regions of crustal thinning, as expected. Utopia is also predicted to be a region of hot mantle, which is hard to reconcile with the surface geology. An alternative model for Utopia treats it as a mascon basin. The Utopia gravity anomaly is consistent with the presence of a 1.2 to 1.6 km thick layer of uncompensated basalt, in good agreement with geologic arguments about the amount of volcanic fill in this area. The mantle thermal structure is the dominant contributor to the observed geoid in our inversion. The mantle also dominates the topography at the longest wavelengths, but shorter wavelengths (harmonic degrees greater than or equal to 4) are dominated by the crustal structure. Because of the uncertainty about the appropriate numerical values for some of the model's input parameters, we have examined the sensitivity of the model results to the planetary structural model (core radius and core and mantle densities), the mantle's viscosity stratification, and the mean crustal thickness. The model results are insensitive to the specific thickness or viscosity contrast of the high-viscosity surface layer and to the mean crustal thickness in the range 25 to 100 km. Models with a large core radius or with an upper mantle low-viscosity zone require implausibly large lateral variations in mantle temperature.

Kiefer, Walter S.↗

Understanding Discharge‐Driven Growth of Cathode Impedance in Ni‐Rich NMC Cathodes

Degradation of LiNi x Mn y Co 1-x-y O 2 (NMC)-based lithium-ion batteries depends strongly on cut-off voltage ranges. In addition to the high upper cut-off voltage, a high depth of discharge (i.e., lower cut-off voltage) significantly worsens cathode impedance growth and capacity fade during long-term cycling. However, there is currently no consensus on the mechanism behind the negative role of a deep discharge. Here, this phenomenon was investigated in graphite||NMC cells with single-crystal cathodes (LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC622) or LiNi 0.76 Co 0.14 Mn 0.10 O 2 (NMC76)) using targeted aging protocols (constant high-voltage holds vs. charge–discharge cycling), while monitoring transition-metal (TM) dissolution, cathode-electrolyte interface (CEI) impedance, and NMC surface composition. We demonstrate a correlation between discharge-driven CEI impedance growth and increased TM dissolution. Furthermore, this degradation pathway is more pronounced in lower-Ni NMC622 than in higher-Ni (NMC76) under comparable delithiation states at charge, with both compositions undergoing the H2→H3 phase transition. X-ray photoelectron spectroscopy (XPS) reveals NMC composition-dependent evolution of surface lattice oxygen and restructured surface layer composition between charged and discharged states. These findings add mechanistic depth to the role of discharge as an active driver of interfacial degradation and provide new insights into its composition dependence.

25 ENERGY STORAGE↗

Pool boiler heat transport system for a 25 kWe advanced Stirling conversion system

Experiments to determine alkali metal/enhanced surface combinations that have stable boiling at the temperatures and heat fluxes that occur in the Stirling engine are reported. Two enhanced surfaces and two alkali metal working fluids were evaluated. The enhanced surfaces were an EDM hole covered surface and a sintered-powder-metal porous layer surface. The working fluids tested were potassium and eutectic sodium-potasium alloy (NaK), both with and without undissolved noncondensible gas. Noncondensible gas (He and Xe) was added to the system to provide gas in the nucleation sites, preventing quenching of the sites. The experiments demonstrated the potential of an alkali metal pool boiler heat transport system for use in a solar-powered Stirling engine. The most favorable fluid/surface combination tested was NaK boiling on a -100 +140 mesh 304L stainless steel sintered porous layer with no undissolved noncondensible gas. This combination provided stable, high-performance boiling at the operating temperature of 700 C. Heat fluxes into the system ranged from 10 to 50 W/sq cm. The transition from free convection to nucleate boiling occurred at temperatures near 540 C. Based on these experiments, a pool boiler was designed for a full-scale 25-kWe Stirling system.

Anderson, W. G.↗

Carbon Thaw Rate Doubles When Accounting for Subsidence in a Permafrost Warming Experiment

Permafrost soils, which are perennially frozen soils found throughout cold regions, contain vast quantities of carbon and ice. When permafrost thaws, carbon can be lost to the atmosphere, contributing to climate change. This means it is important to track permafrost thaw, which is often done using active layer thickness, or the depth of the seasonally thawed surface layer of soil. However, ice volume can be lost from thawing permafrost, causing the soil surface to drop. Conventional measurements do not account for this surface drop, and the rate of thaw could therefore be underestimated. We found that experimentally warmed soils dropped at a rate of 6 cm year-1, mostly due to loss of ice volume and also due to the loss of soil mass. When accounting for the change in soil surface height over time, the full depth of permafrost thaw was 49% greater. The increased depth of thaw resulted in more than twice as much carbon being thawed as was estimated with standard methods that did not account for subsidence. These findings suggest that permafrost is thawing more quickly than long-term records indicate and that this could result in additional carbon release contributing to climate change.

54 ENVIRONMENTAL SCIENCES↗

A model of the tropical Pacific sea surface temperature climatology

A model for the climatological mean sea surface temperature (SST) of the tropical Pacific Ocean is developed. The upper ocean response is computed using a time dependent, linear, reduced gravity model, with the addition of a constant depth frictional surface layer. The full three-dimensional temperature equation and a surface heat flux parameterization that requires specification of only wind speed and total cloud cover are used to evaluate the SST. Specification of atmospheric parameters, such as air temperature and humidity, over which the ocean has direct influence, is avoided. The model simulates the major features of the observed tropical Pacific SST. The seasonal evolution of these features is generally captured by the model. Analysis of the results demonstrates the control the ocean has over the surface heat flux from ocean to atmosphere and the crucial role that dynamics play in determining the mean SST in the equatorial Pacific. The sensitivity of the model to perturbations in the surface heat flux, cloud cover specification, diffusivity, and mixed layer depth is discussed.

Seager, Richard↗

Nanoscopic Structure of the Interface between Reduced TiO 2– x (110) and Water Vapor

We investigate the interaction between a reduced rutile TiO 2–x (110)-(1×4) surface and water vapor at ambient pressures using atomic force microscopy and X-ray photoelectron spectroscopy (AP-AFM and AP-XPS). Our results reveal that water molecules strongly interact with the reduced surface, leading to hydroxylation and localized clustering of water molecules. In defect-rich regions, AFM tip-induced restructuring causes removal of the topmost surface layer, highlighting the lowered cohesive energy of the surface atoms upon hydroxylation. These findings provide new insights into the water adsorption and restructuring mechanisms on reducible transition metal oxides, relevant for catalytic and environmental applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acrylic purification and coatings

Radon (Rn) and its decay daughters are a well-known source of background in direct WIMP detection experiments, as either a Rn decay daughter or an alpha particle emitted from a thin inner surface layer of a detector could produce a WIMP-like signal. Different surface treatment and cleaning techniques have been employed in the past to remove this type of contamination. A new method of dealing with the problem has been proposed and used for a prototype acrylic DEAP-1 detector. Inner surfaces of the detector were coated with a layer of ultra pure acrylic, meant to shield the active volume from alphas and recoiling nuclei. An acrylic purification technique and two coating techniques are described: a solvent-borne (tested on DEAP-1) and solvent-less (being developed for the full scale DEAP-3600 detector).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Molecular Investigation of the Initial Nucleation of Calcium Phosphate on TiO 2 Substrate: The Effects of Surface Nanotopographies

Nucleation and biomineralization of apatite on titanium-based material surfaces is crucial to improve surface biocompatibility, osseointegration, and rapid bone ingrowth in biomedical applications such as joint replacements. Here, this work is designed to provide new insights on the molecular processes in the initial nucleation of calcium phosphate on TiO 2 surface by means of classical molecular dynamics (MD) simulations. Aggregation of calcium and phosphate ions in pure aqueous solution was studied, and the free energies during ion adsorption was investigated by the calculation of PMFs. The MD results suggest surface hydroxylation rate and nanotopographies of TiO 2 substrate contribute significantly to the initial nucleation of calcium phosphate. Our simulations suggest that surface hydroxyls on TiO 2 provide active sites for the aggregation of calcium phosphate. Both calcium ions and phosphate ions could bind to the hydroxylated TiO 2 surface directly or indirectly via the first water layer. Surface nanotopographies (e.g., grooves or ridges) seem to be able to restrict the diffusion of calcium ions and phosphate ions, hence offering more opportunities for adsorption by trapping ions inside channels. In conclusion, it can be inferred that apatite may be formed more favorably on porous or concave surfaces.

36 MATERIALS SCIENCE↗

Nature of Catalytic Active Sites Present on the Surface of Advanced Bulk Tantalum Mixed Oxide Photocatalysts

The most active photocatalyst system for water splitting under UV irradiation (270 nm) is the promoted 0.2%NiO/NaTaO3:2%La photocatalyst with optimized photonic efficiency (P.E.) of 56%, but fundamental issues about the nature of the surface catalytic active sites and their involvement in the photocatalytic process still need to be clarified. This is the first study to apply cutting edge surface spectroscopic analyses to determine the surface nature of tantalum mixed oxide photocatalysts. Surface analysis with HR-XPS (1-3nm) and HS-LEIS (0.3nm) spectroscopy indicates that the NiO and La2O3 promoters are concentrated in the surface region of the bulk NaTaO3 phase. The La2O3 is concentrated on the NaTaO3 outermost surface layers while NiO is distributed throughout the NaTaO3 surface region (1-3nm). Raman and UV-vis spectroscopy revealed that the bulk molecular and electronic structures, respectively, of NaTaO3 were not modified by the addition of the La2O3 and NiO promoters, with La2O3 resulting in a slightly more ordered structure. Photoluminescence (PL) spectroscopy reveals that the addition of La2O3 and NiO produces a greater number of electron traps resulting in the suppression of the recombination of excited electrons/holes. In contrast to earlier reports, the La2O3 is only a textural promoter (increasing the BET surface area ~7x by stabilizing smaller NaTaO3 particles), but causes a ~3x decrease in the specific photocatalytic TORs ( mol H2/m2/h) rate because surface La2O3 blocks exposed catalytic active NaTaO3 sites. The NiO promoter was found to be a potent electronic promoter that enhances the NaTaO3 surface normalized TORs by a factor of ~10-50 and TOF by a factor of ~10. The level of NiO promotion is the same in the absence and presence of La2O3 demonstrating that there is no promotional synergistic interaction between the NiO and La2O3 promoters. This study demonstrates the important contributions of the photocatalyst surface properties to the fundamental molecular/electronic structure-photoactivity relationships of promoted NaTaO3 photocatalysts that were previously not appreciated in the literature.

Phivilay, Somphonh↗

COMPARISON OF SOLAR SURFACE FLOWS INFERRED FROM TIME-DISTANCE HELIOSEISMOLOGY AND COHERENT STRUCTURE TRACKING USING HMI/SDO OBSERVATIONS

We compare measurements of horizontal flows on the surface of the Sun using helioseismic time-distance inversions and coherent structure tracking of solar granules. Tracking provides two-dimensional horizontal flows on the solar surface, whereas the time-distance inversions estimate the full three-dimensional velocity flows in the shallow near-surface layers. Both techniques use Helioseismic and Magnetic Imager observations as input. We find good correlations between the various measurements resulting from the two techniques. Further, we find a good agreement between these measurements and the time-averaged Doppler line-of-sight velocity, and also perform sanity checks on the vertical flow that resulted from the three-dimensional time-distance inversion.

79 ASTRONOMY AND ASTROPHYSICS↗

First-principles study of the nano-scaling effect on the electrochemical behavior in LiNi 0.5 Mn 1.5 O 4

Nano-scaling of electrode materials is often used in battery applications to enhance performance, particularly relating to rate capability. However, for the high-voltage spinel LiNi 0.5 Mn 1.5 O 4 conflicting results have been reported on the benefits of nano-scaling. In this study, we present first-principles calculations to investigate the effect of nano-scaling on LiNi 0.5 Mn 1.5 O 4 , specifically focusing on the roles and coupling between surface stability, cation ordering and phase behavior. We calculate and compare the surface energy for the low index facets (100), (110), and (111), and find that the most stable facet is dependent on the cation ordering at the surface layer. In this context, we predict a spontaneous surface reconstruction in the cation-ordered structure which leads to a deviation from the perfect surface cation ordering and results in an enhanced accessibility to solid solution behavior as a function of Li content. Our results imply that nano-scaling will be more beneficial for the cation-ordered structure, as compared to the disordered structure where the solid solution region is already intrinsically accessible for a broad range of Li concentrations.

25 ENERGY STORAGE↗