Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Structural, morphological and electrical studies of lithium ion irradiated sodium potassium niobate single crystal grown by flux method

Single crystals of sodium potassium niobate (K{sub 0.5}Na{sub 0.5})NbO{sub 3} (KNN) were grown by flux method and crystals were irradiated with 45 MeV Li ions to modify the electrical properties. Energy of the irradiated heavy ion was lower than the threshold energy to produce columnar defect and only clusters of defect was observed. The surface morphology of the irradiated single crystals was studied using scanning electron microscope (SEM) and atomic force microscope (AFM). The results show that the surface roughness value was found to increase with increasing fluence.

36 MATERIALS SCIENCE↗

On the dynamic roughening transition in nanocomposite film growth

Surface roughness and dynamic growth behavior of TiC/a-C nanocomposite films deposited by nonreactive pulsed-dc (p-dc) magnetron sputtering were studied using atomic force microscopy, cross-sectional scanning, and transmission electron microscopy. From detailed analyses of surface morphology and growth conditions, it is concluded that a transition in growth mechanisms occurs, i.e., a mechanism dominated by geometric shadowing at a p-dc frequency of 100 kHz evolving to a surface diffusion mechanism driven by impact-induced atomistic downhill flow process by Ar{sup +} ions at a p-dc frequency of 350 kHz. It is shown that rapid smoothening of initially rough surfaces with rms roughness from {approx}6 to <1 nm can be effectively achieved with p-dc sputtering at 350 kHz pulse frequency, leading to a transition from a strong columnar to a columnar-free microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

3D nanotube-based composites produced by laser irradiation

3D nanocomposites have been fabricated through self-assembly under near-IR cw laser irradiation, using four types of multiwalled and single-walled carbon nanotubes produced by chemical vapour deposition, disproportionation on Fe clusters and cathode sputtering in an inert gas. The composites were prepared by laser irradiation of aqueous solutions of bovine serum albumin until the solvent was evaporated off and a homogeneous black material was obtained: modified albumin reinforced with nanotubes. The consistency of the composites ranged from paste-like to glass-like. Atomic force microscopy was used to study the surface morphology of the nanomaterials. The nanocomposites had a 3D quasi-periodic structure formed by almost spherical or toroidal particles 200-500 nm in diameter and 30-40 nm in visible height. Their inner, quasi-periodic structure was occasionally seen through surface microfractures. The density and hardness of the nanocomposites exceed those of microcrystalline albumin powder by 20% and by a factor of 3-5, respectively. (nanostructures)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deciphering supramolecular and polymer-like behavior in metallogels: real-time insights into temperature-modulated gelation and rapid self-assembly dynamics

Bis(pyridyl) urea-based gelators, namely L2 and its isomeric mixture ( L1 + L2 ), are known to self-assemble into 1D architectures capable of inducing supramolecular gelation. Coordination with metal ions such as Ag( I ), Cu( II ), and Fe( III ) introduces structural reinforcement, enabling the formation of distinct 3D networks governed by metal-specific coordination geometries. Here, we present a comprehensive investigation into the temperature-responsive behavior (20–60 °C) of L2 and L1 + L2 , both in the absence and presence of Ag( I ), Dy( III ), Fe( III ), Cu( II ), and Ho( III ), using real-time small-angle neutron scattering (SANS). To probe long-term structural evolution/kinetics of self-assembly, real-time small-angle X-ray scattering (SAXS) was employed on L2 + Ag gels, complemented by differential scanning calorimetry (DSC) to evaluate thermal transitions. Our results reveal strikingly divergent gelation behaviors: L2 forms a highly rigid, covalent polymer-like network, while L1 + L2 exhibits remarkable thermal adaptability. Upon metal coordination, the assemblies exhibit pronounced crystallinity and exceptional thermal stability, as evidenced by persistent Bragg reflections and invariant d-spacings. Intriguingly, L2 : Fe (2 : 1) and L1 : L2 : Fe (0.5 : 0.5 : 1) in acetonitrile-d 3 (ACN-d 3 ) deviate from this trend, forming thermally labile amorphous gels. These systems show a complete loss of crystalline order, reduced Porod exponents—indicative of collapsed or branched fiber morphologies—and prominent melting and glass transition events in DSC. Fitting SANS and SAXS data to the correlation length model unveiled insightful nanostructural features. While most systems displayed minimal temperature-induced variation in mesh size or surface morphology, L2 : Ag in dimethyl sulfoxide-d 6 (DMSO-d 6 )/D 2 O and L2 : Fe (1 : 1) in ACN-d 3 exhibited a rare combination of thermally stable correlation lengths and increasing high- q exponents—strongly suggesting progressive fiber densification or surface smoothing within a robust gel framework. These findings highlight the tunability and structural resilience of supramolecular gels through precise control of ligand architecture, metal coordination, and temperature, offering valuable design principles for functional soft materials.

Pajoubpong, Jinnipha [Univ. of Cincinnati, OH (Uni↗

Electronic absorption band broadening and surface roughening of phthalocyanine double layers by saturated solvent vapor treatment

Variations in the electronic absorption (EA) and surface morphology of three types of phthalocyanine (Pc) thin film systems, i.e. copper phthalocyanine (CuPc) single layer, zinc phthalocyanine (ZnPc) single layer, and ZnPc on CuPc (CuPc/ZnPc) double layer film, treated with saturated acetone vapor were investigated. For the treated CuPc single layer film, the surface roughness slightly increased and bundles of nanorods were formed, while the EA varied little. In contrast, for the ZnPc single layer film, the relatively high solubility of ZnPc led to a considerable shift in the absorption bands as well as a large increase in the surface roughness and formation of long and wide nano-beams, indicating a part of the ZnPc molecules dissolved in acetone, which altered their molecular stacking. For the CuPc/ZnPc film, the saturated acetone vapor treatment resulted in morphological changes in mainly the upper ZnPc layer due to the significantly low solubility of the underlying CuPc layer. The treatment also broadened the EA band, which involved a combination of unchanged CuPc and changed ZnPc absorption.

36 MATERIALS SCIENCE↗

Improving qubit coherence time through detailed materials analysis

This study investigates the defects, imperfections, and variations in superconducting Nb thin films deposited on sapphire substrates. Two samples, W114 and W118, were fabricated using DC Magnetron Sputtering and Electron Cyclotron Resonance (ECR), respectively. Each sample was analyzed at five distinct spots to compare elemental homogeneity and thickness variations. Scanning Electron Microscopy (SEM) was employed to examine surface morphology, while Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Photoelectron Spectroscopy (XPS) provided elemental and chemical state analyses. SEM revealed distinct structures in W114 and a uniform surface in W118. EDS showed higher aluminum and oxygen signals in W118, indicating a thicker film. XPS detected a higher Nb₂O₅ signal in W118, attributed to a thicker oxygen layer. These findings highlight the critical role of precise material characterization in advancing quantum computing technologies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of the Effects of Hydrogen Atoms Concentration on the Tungsten Sigma 5 (310) Symmetric Tilt Grain Boundary Strength

Recently, strict policies are being made by several government agencies, environmentalists, and some people against the usage of fossil fuels as the source of energy generation. Not only because its supply does not meet the booming human population all around the world but also it is not pollution-free; just to mention a few. These setbacks attached to fossil fuels make nuclear fusion energy an important means of energy generation; it is characterized with clean and easy means of energy generation compared to other methods of power production such as hydropower and solar power. The success of fusion power depends on the design of modern fusion materials and the selection of the plasma facing materials (PFMs). ITER and Demonstration Power plant (DEMO) considered Tungsten (W) as part of their PFMs. W is the most preferred plasma facing material (PFM) for the future nuclear fusion reactors such as in the proposed DEMO and ITER- which is at the moment the largest Tokamak nuclear fusion reactor under construction in the world. Tungsten has excellent thermal properties, low-sputtering yield, and high melting point. Hydrogen (H) atoms have an affinity for tungsten grain boundary, and are trapped there permanently. In addition, it makes W prone to failure. In a fusion environment, W is exposed to extremely high fluences of H isotopes and irradiation. The low-energy H isotopes will be retained in the tungsten material leading to the formation of blisters in W and cause degradation of the mechanical and thermal properties of W. For safety reason, the effect of hydrogen atoms concentration at the tungsten S5 (310) grain boundary (GB) needs to be investigated and it will aid in better designing of fusion wall materials. Σ5 (310) is considered in this work because it is one of the most important and dominant GBs in the atomic distribution of materials. GBs affect the strength of W as well. The GBs with superior properties can be increased in the atomic distribution of W relative to others in order to achieve high overall material properties. GBs play a role in determining the properties of materials such as the thermal and electrical conductivity of a material. The crystallography description of the Σ5 (310) grain boundary comprises of Σ, tilt type- symmetric, crystallographic direction [001] and the GB plane. The Σ is related to the coincidence site lattice (CSL) model, which denotes that in a certain orientation between two grains, there are numbers of points where the atoms coincide. For the case of Σ5 (310), the misorientation between the two crystals is 36.9 degree along [001] direction and the GB plane is (310). GB properties differ as result of different sigma values and Σ is the reciprocal of CSL. Thus, Σ5 GB has 1/5 of the atoms in coincident sites. For the case of a tilt boundary, the lattice vector is embedded in the GB plane. Also for a tilt-symmetric GB, the grains directions are mirrored against the GB plane. The classic molecular dynamics method (MD) is an accurate numerical approach that adopts Newton's equation of motion to get atoms trajectories.Studies have been carried out on atomistic simulation of tungsten.The effect of H on GB migration in W was studied by using molecular dynamics simulation and it was discovered that H prevents the GB migration at different H concentrations and temperatures. Others investigated the migration, dissolution and trapping of H in W using MD and first principles method. Atomistic simulations have been used to predict the GB energy in Fe and Mo using embedded atom method (EAM) and it was concluded that the GB energies in the metals are affected more by the orientation of the GB plane than by the misorientation of the lattice. Study was done on symmetric and asymmetric tilt grain boundaries in Cu and Al using MD method and the GB structures and energies were established; EAM was adopted as well. The formation of hydrogen blisters and cracking processes for various tungsten materials were investigated and it was observed that, dopants increase the number of blisters and exfoliations for both stress relieved and recrystallized W. Investigation was carried out on the surface morphology changes in W caused by plasmas heat and particle loadings and their effects on material degradation in ITER. In addition, the study of interactions between low energetic hydrogen and tungsten surface was carried out using molecular dynamics simulations with analytical bond order potential (ABOP) and the results addressed irradiation damage in tungsten. Mechanism of blister formation on W surface was studied using experimental approach and it was observed that the amount of blisters formed depends on the beam fluence. This work investigates the effect of hydrogen atom concentrations at the W Σ5 (310) tilt-symmetric GB on the grain boundary energy and the GB pulling force. (authors)

36 MATERIALS SCIENCE↗

Improving Qubit Coherence Time Through Detailed Materials Analysis

This study investigates the defects, imperfections, and variations in Nb thin films deposited on sapphire substrates. Two samples, W114 and W118, were fabricated using DC Magnetron Sputtering and Electron Cyclotron Resonance (ECR), respectively. Each sample was analyzed at five distinct spots to compare elemental homogeneity and variations in oxide layers. Scanning Electron Microscopy (SEM) was employed to examine surface morphology, while Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Photoelectron Spectroscopy (XPS) provided elemental and chemical state analyses. SEM revealed distinct structures in W114 and a uniform surface in W118. EDS showed higher aluminum signals in W118, indicating a thinner film in comparison to W114. XPS detected a higher Nb₂O₅ signal in W118, in comparison to W114, which can be attributed to the presence of a thicker Nb₂O₅ layer in W118. These findings highlight the critical role of precise material characterization in advancing quantum computing technologies.

Rosado Bonilla, Cristy M.↗

Ferroelectric field effect of the bulk heterojunction in polymer solar cells

A ferroelectric field effect in the bulk heterojunction was found when an external electric field (EEF) was applied on the active layer of polymer solar cells (PSCs) during the annealing process of the active layer spin-coated with poly(3-hexylthiophene):[6,6]-phenyl-C{sub 61} butyric acid methyl ester. For one direction field, the short circuit current density of PSCs was improved from 7.2 to 8.0 mA/cm{sup 2}, the power conversion efficiency increased from 2.4% to 2.8%, and the incident photon-to-current conversion efficiency increased from 42% to 49% corresponding to the different EEF magnitude. For an opposite direction field, the applied EEF brought a minus effect on the performance mentioned above. EEF treatment can orientate molecular ordering of the polymer, and change the morphology of the active layer. The authors suggest a explanation that the ferroelectric field has been built in the active layer, and therefore it plays a key role in PSCs system. A needle-like surface morphology of the active film was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of (Se{sub 80}Te{sub 20}){sub 100−x}Ag{sub x} (0 ≤ x ≤ 4) thin films

Thin films of (Se{sub 80}Te{sub 20}){sub 100−x}Ag{sub x} (0 ≤ x ≤ 4) glasses were prepared by thermal evaporation of the bulk samples. The transmittance (T) and reflection (R) spectra of amorphous thin films were obtained in the spectral region in the range 400–2500 nm. The optical band gap (E{sub g}) has been determined by Tauc’s extrapolation method. The surface morphology has been determined by the Scanning Electron Microscopy (SEM)

36 MATERIALS SCIENCE↗

Inductively coupled plasma-reactive ion etching of InSb using CH{sub 4}/H{sub 2}/Ar plasma

InSb is an important material for optoelectronic devices. Most InSb devices are currently wet etched, and the etching geometries are limited due to the isotropic nature of wet etching. Inductively coupled plasma (ICP)-reactive ion etching (RIE) is a more desirable alternative because it offers a means of producing small anisotropic structures especially needed in large format infrared focal plane arrays. This work describes the novel use of ICP-RIE for fabricating InSb mesas with CH{sub 4}/H{sub 2}/Ar plasma and presents the influences of the process parameters on the etch rate and surface morphology. The parameters investigated include bias radio frequency power (50-250 W), %CH{sub 4} in H{sub 2} (10-50), argon (Ar) partial pressure (0-0.3 Pa with total pressure of 1.0 Pa), and total pressure (0.35-4 Pa). With the process parameters optimized in this investigated ranges, good etching results have been achieved with etch rates up to 80 nm/min, and etch features with sidewall angles of about 80 degree sign , the etched surface is as smooth as before the RIE process.

36 MATERIALS SCIENCE↗

Effects of low-temperature-buffer, rf-power, and annealing on structural and optical properties of ZnO/Al{sub 2}O{sub 3}(0001) thin films grown by rf-magnetron sputtering

ZnO thin films were epitaxially grown on Al{sub 2}O{sub 3} (0001) substrates in a radio-frequency (rf) magnetron sputtering chamber. The surface morphology of ZnO was remarkably affected by the incorporation of a low-temperature grown ZnO buffer as well as the changes in rf-power. X-ray diffractions, combined with the surface micropits, revealed strain relaxations in the ZnO epilayers grown with higher rf-powers, which in turn caused a redshift to the intrinsic exciton absorption peak. Strain relaxations were also observed in the ZnO epilayers upon thermal annealing, which led to a redshift in the E{sub 2}{sup high} Raman mode. A factor of approx0.7 cm{sup -1} GPa{sup -1}, i.e., a biaxial stress of 1 GPa can shift the E{sub 2}{sup high} mode by 0.7 cm{sup -1}, was obtained. The point defects related absorptions and the exciton localizations were suppressed by annealing, which, in conjunction with the strain-relaxation induced redshift in the intrinsic-exciton absorptions, steepened the absorption edge and increased the optical bandgap energy of the ZnO epilayer.

36 MATERIALS SCIENCE↗

Microencapsulated n-octacosane as phase change material for thermal energy storage

This study deals with preparation and characterization of polymethylmetracrylate (PMMA) microcapsules containing n-octacosane as phase change material for thermal energy storage. The surface morphology, particle size and particle size distribution (PSD) were studied by scanning electron microscopy (SEM). The chemical characterization of PMMA/octacosane microcapsules was made by FT-IR spectroscopy method. Thermal properties and thermal stability of microencapsulated octacosane were determined using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The melting and freezing temperatures and the latent heats of the microencapsulated octacosane as PCM were measured as 50.6 and 53.2 C, 86.4 and -88.5 J/g, respectively, by DSC analysis. TGA analysis indicated that the microencapsulated octacosane degrade in two steps and had good chemical stability. Thermal cycling test shows that the microcapsules have good thermal reliability with respect to the accelerated thermal cycling. Based on the results, it can be considered that the microencapsulated octacosane have good energy storage potential. (author)

25 ENERGY STORAGE↗

Effect of shock compression on aluminum particles in condensed media

Specimens consisting of either spherical or flake aluminum particles saturated with liquid heptane were subjected to reflected shock pressures on the order of 20-30 GPa. Postmortem analysis of the spherical powder shows that while average size does not significantly change, surface morphology is no longer spherical but sharp edged with evidence of shear and particle break-up. A similar analysis for flakes shows break down to finer particles one order less than the original flake size. This suggests that the oxide layer was damaged and that bare aluminum was exposed, thus increasing aluminum particle sensitivity to reaction.

36 MATERIALS SCIENCE↗

III-V Nanowire Array Growth by Selective Area Epitaxy

III-V semiconductor nanowires are unique material phase due to their high aspect ratio, large surface area, and strong quantum confinement. This affords the opportunity to control charge transport and optical properties for electrical and photonic applications. Nanoscale selective area metalorganic chemical vapor deposition growth (NS-SAG) is a promising technique to maximize control of nanowire diameter and position, which are essential for device application. In this work, InP and GaAs nanowire arrays are grown by NS-SAG. We observe enhanced sidewall growth and array uniformity disorder in high growth rate condition. Disorder in surface morphology and array uniformity of InP nanowire array is explained by enhanced growth on the sidewall and stacking faults. We also find that AsH{sub 3} decomposition on the sidewall affects the growth behavior of GaAs nanowire arrays.

36 MATERIALS SCIENCE↗

Stochastic dislocation kinetics and fractal structures in deforming metals probed by acoustic emission and surface topography measurements

We demonstrate that the fractal dimension (FD) of the dislocation population in a deforming material is an important quantitative characteristic of the evolution of the dislocation structure. Thus, we show that peaking of FD signifies a nearing loss of uniformity of plastic flow and the onset of strain localization. Two techniques were employed to determine FD: (i) inspection of surface morphology of the deforming crystal by white light interferometry and (ii) monitoring of acoustic emission (AE) during uniaxial tensile deformation. A connection between the AE characteristics and the fractal dimension determined from surface topography measurements was established. As a common platform for the two methods, the dislocation density evolution in the bulk was used. The relations found made it possible to identify the occurrence of a peak in the median frequency of AE as a harbinger of plastic instability leading to necking. It is suggested that access to the fractal dimension provided by AE measurements and by surface topography analysis makes these techniques important tools for monitoring the evolution of the dislocation structure during plastic deformation—both as stand-alone methods and especially when used in tandem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiferroic properties of Pb{sub 0.90}Sr{sub 0.10}TiO{sub 3}-CoFe{sub 2}O{sub 4} nanostructured bilayered thin film

Pb{sub 0.90}Sr{sub 0.10}TiO{sub 3}-CoFe{sub 2}O{sub 4}(PST10-CFO) nanostructured bilayered thin film were grown on Si (100) substrate by using metallo-organic decomposition chemical route and spin coating technique. Results show that PST (pervoskite structure) and CFO (spinel) phase coexist in the bilayered thin films, annealed at 650°C for 2hr and no obvious impurity phase can be detected. The structural, surface morphology and micro structural properties were confirmed by X-Ray diffraction (XRD), atomic force microscope (AFM) respectively. Excellent ferroelectric behavior at different voltage was observed, with two platinum electrodes only at surface of the bilayer thin film. A room temperature ferromagnetic behavior was observed in the bilayered Pb{sub 0.90}Sr{sub 0.10}TiO{sub 3}-CoFe{sub 2}O{sub 4} nanostructured thin film. The saturation magnetization and variation in coercivity value of the bilayer thin film is lower than that of the pure CFO film in the presence of non ferromagnetic PST layer which is the attributed that the significant coupling between the two phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Developing Quantum Levitation of ICF Capsules Coated with MgB 2 Thin Films

Current inertial confinement fusion (ICF) capsule support technologies create implosion perturbations which reduce fusion yield, driving the search for new support paradigms. Quantum levitation of the capsule will eliminate the requirement of a physical support structure, increasing fusion yield. The application of an external magnetic field to a capsule coated with a superconducting film can provide the necessary conditions for levitation. Magnesium diboride (MgB 2 ) is an attractive option for ICF applications as it has a high reported superconducting transition temperature of 39 K and is a low Z compound. This project is part of an ongoing effort which seeks to coat ICF capsules with a thin layer of superconducting MgB 2 . This project studied the synthesis of MgB 2 and diffusion/reaction kinetics of B/Mg/B m ultilayer thin films. These films were sputter deposited on flat glassy carbon substrates. Films were annealed in a tube furnace at temperatures between 400 °C and 650 °C for a total of 29 hours with film characterization done at predetermined intervals. At each interval, superconducting properties of the samples were evaluated with superconducting quantum interference device (SQUID) magnetometry, while Rutherford backscattering (RBS) with 2 MeV 4 He + ions was done to determine the composition and depth profile of the films. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to characterize surface morphology. Superconducting behavior was observed in thin films annealed at and above 450 °C. Formation of superconducting MgB 2 at 450 °C h as not been previously reported below 500 °C. The surface of the samples annealed at 500 °C and below was smooth with a measured roughness of ~3 nm. After 29 hours of annealing time, the 450 °C sample had a transition temperature of 27.3 K. The highest transition temperature measured was 30.9 K and was associated with a sample annealed for 29 hours at 650 °C. Transition temperatures were weakly positively correlated with annealing temperature and showed dependence on initial structural quality and oxygen contamination. Current research is attempting to synthesize superconducting MgB 2 coatings on spherical Si beads with the findings of this study. Future efforts are focused on the construction and testing of a levitation apparatus.

36 MATERIALS SCIENCE↗