Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Cr(110) texture induced by epitaxy on Al 2 O 3 (0001) substrates: Preferential grain growth in the ⟨001⟩ direction

Chromium exhibits (110) textured growth on Al 2 O 3 (0001) substrates induced by epitaxy. Epitaxy occurs in nine distinct orientations, leading to a polycrystalline film of grains with (110) out-of-plane orientation but different in-plane orientations. For e-beam evaporated films, scanning electron microscopy shows acicular Cr grains elongated in the 001 direction. Grain boundaries occur along (110) and (110) planes, which is explained by the low surface energy of {110} planes in the bcc structure. The direction of the long axes of the grains relative to the substrate is defined by the underlying hexagonal symmetry of the substrate, leading to a unique tri-directional microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Observation of spin-dependent quantum well resonant tunneling in textured CoFeB layers

We report the observation of spin-dependent quantum well (QW) resonant tunneling in textured CoFeB free layers of single MgO magnetic tunnel junctions (MTJs). The inelastic electron tunneling spectroscopy spectra clearly show the presence of resonant oscillations in the parallel configuration, which are related with the appearance of majority-spin Δ{sub 1} QW states in the CoFeB free layer. To gain a quantitative understanding, we calculated QW state positions in the voltage-thickness plane using the so-called phase accumulation model (PAM) and compared the PAM solutions with the experimental resonant voltages observed for a set of MTJs with different CoFeB free layer thicknesses (t{sub fl} = 1.55, 1.65, 1.95, and 3.0 nm). An overall good agreement between experiment and theory was obtained. An enhancement of the tunnel magnetoresistance with bias is observed in a bias voltage region corresponding to the resonant oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Nano-textured high sensitivity ion sensitive field effect transistors

Nano-textured gate engineered ion sensitive field effect transistors (ISFETs), suitable for high sensitivity pH sensors, have been realized. Utilizing a mask-less deep reactive ion etching results in ultra-fine poly-Si features on the gate of ISFET devices where spacing of the order of 10 nm and less is achieved. Incorporation of these nano-sized features on the gate is responsible for high sensitivities up to 400 mV/pH in contrast to conventional planar structures. The fabrication process for this transistor is inexpensive, and it is fully compatible with standard complementary metal oxide semiconductor fabrication procedure. A theoretical modeling has also been presented to predict the extension of the diffuse layer into the electrolyte solution for highly featured structures and to correlate this extension with the high sensitivity of the device. The observed ultra-fine features by means of scanning electron microscopy and transmission electron microscopy tools corroborate the theoretical prediction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Atomic resolution strain analysis in highly textured FePt thin films

In this work, we present a detailed investigation of FePt-substrate interfaces and their influence towards the microstructural and magnetic configurations of the resulting metallic films. Discontinuous FePt films of roughly 15 nm thickness are deposited at 750 °C on MgO, MgAl{sub 2}O{sub 4}, SrTiO{sub 3}, and (La,Sr)(Al,Ta)O{sub 3} single-crystalline substrates. All of these films mainly show out-of-plane textured FePt islands; however, fractions of L1{sub 2} and in-plane oriented crystals are observed for the films on substrates with reduced lattice mismatch. Reduced easy axis coercivities and enhanced hard axis remanence values affirm this observation. Moreover, quantitative high-resolution transmission electron microscope analysis reveals that the reduced lattice mismatch results in a decreased density of dislocations, especially misfit dislocations, at the FePt-substrate interface. To further extend the research, carbon-doped FePt+32%C films are deposited on single-crystalline and sputtered MgO at 750 °C and 650 °C, respectively, to characterize the influence of a segregating media and reduced grain size. A comparison to the pure FePt sample reveals that the presence of seed layer grain boundaries leads to an increased fraction of in-plane oriented material, while the density of misfit dislocations solely depends on the degree of lattice mismatch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Spin texture on top of flux avalanches in Nb/Al 2 O 3 /Co thin film heterostructures

We report on magneto-optical imaging, magnetization, Hall effect, and magneto-resistance experiments in Nb/Al 2 O 3 /Co thin film heterostructures. The magneto-transport measurements were performed in samples where electrical contacts were placed on the Co layer. The magnetic field is applied perpendicularly to the plane of the film and gives rise to abrupt flux penetration of dendritic form. A magnetization texture is imprinted in the Co layer in perfect coincidence with these ramifications. The spin domains that mimic the vortex dendrites are stable upon the field removal. Moreover, the imprinted spin structure remains visible up to room temperature. In the region of the field-temperature diagram where flux instabilities are known to occur in bare Nb films, irregular jumps are observed in the magnetic hysteresis and large amplitude noise is detected in the magneto-resistance and Hall resistivity data when measured as a function of the field.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Impact of laser anneal on NiPt silicide texture and chemical composition

We have combined synchrotron X-ray pole figure measurements and transmission electron microscopy (TEM) nano-beam diffraction to study the impact of millisecond laser anneal on the texture and microstructure of NiPt silicide thin films. The powerful use of nano-beam diffraction in plan-view geometry allows here for both a mapping of grain orientation and intra-grain measurements even if these crystalline grains become very small. With this unique combination of local and large-scale probes, we find that silicide formation on n and p doped substrates using laser annealing results in smaller grains compared with the films processed using standard rapid thermal annealing. The laser annealed samples also result in grains that are more epitaxially oriented with respect to the Si substrate. For n-type substrate, the film is dominated by (020) and (013) oriented fibers with significant levels of intra-grain bending (transrotation) observed in both types of grains. For p-type substrates, mostly epitaxially aligned grains are detected. TEM coupled with energy-dispersive X-ray analysis was also used to study the elemental distribution in the silicide samples. Furthermore, we confirm that laser anneal leads to a larger accumulation of platinum at the silicide-substrate interface and modifies the distribution of dopants throughout the film.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Ultrafast imprinting of topologically protected magnetic textures via pulsed electrons

Short electron pulses are demonstrated to trigger and control magnetic excitations, even at low electron current densities. We show that the tangential magnetic field surrounding a picosecond electron pulse can imprint topologically protected magnetic textures such as skyrmions in a sample with a residual Dzyaloshinskii-Moriya spin-orbital coupling. Characteristics of the created excitations such as the topological charge can be steered via the duration and the strength of the electron pulses. Here, the study points to a possible way for a spatiotemporally controlled generation of skyrmionic excitations.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Direct synthesis of biaxially textured nickel disilicide thin films by magnetron sputter deposition on low-cost metal tapes for flexible silicon devices

Nickel silicides are widely used as contact materials for electronic devices based on silicon (Si). However, they have been predominantly fabricated by annealing separate Ni and Si phases which leads to phase and structural complexity. In this letter, direct epitaxial growth of a single-phase nickel disilicide (NiSi 2 ) thin film by sputter deposition of NiSi 2 is achieved on low-cost and flexible Hastelloy tapes which offers a promising route to fabricate low-cost, flexible electronic devices. Biaxially textured titanium nitride (TiN) is applied as the seeding layer and the diffusion barrier under NiSi 2 . An epitaxial relationship of (001)$\langle$100$\rangle$NiSi 2 ∥ (001)$\langle$110$\rangle$TiN is observed with an extra-large lattice mismatch (~10.3%) between NiSi 2 and TiN. Both the bonding similarity and the passivation effect by hydrogen promote the epitaxial growth of NiSi 2 on TiN. The flat and smooth NiSi 2 thin film consists of grains with a size of 50–100 nm. An epitaxially grown Si film on NiSi 2 further demonstrates the potential of manufacturing high-performance Si flexible electronics with NiSi 2 /TiN/Hastelloy as the direct contact through this approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Significant enhancement of magnetocaloric effect in a NiMnCuGa Heusler alloy through textural modification

Magnetocaloric materials are of increasing interest to bring magnetic refrigeration to everyday households and drastically impact the energy demands for temperature control devices. In this work, a polycrystalline Heusler alloy of composition Ni2Mn0.76Cu0.24Ga with coinciding structural and magnetic transformation temperatures was subjected to compressive stress assisted thermal cycling (SATC) to enhance the magnetic properties by inducing a preferred orientation in the martensite. Isofield magnetization measurements showed a sharpening of the transformation between ferromagnetic martensite and paramagnetic austenite due to SATC. In isothermal magnetization measurements, SATC was seen to increase the magnetostructural coupling. With a 2 T applied magnetic field, the magnetocaloric effect (MCE) increased from ∼10 to ∼25 J/kg K and the refrigeration capacity (RC) almost doubled due to SATC. Heat capacity measurements were largely unaffected by SATC. The change in adiabatic temperature was estimated by using Cp and change in magnetic entropy (ΔSM) calculations. SATC was seen to increase ΔTad from ∼1.2 K to 2 K for an applied magnetic field of 2 T. Neutron diffraction measurements revealed highly textured martensite in the as received state that rotated to a more ideal preferred orientation after SATC that enhanced the magnetostructural transformation; and thus, improving the MCE and ΔTad.

McLeod, M. V. (ORCID:0000000329883516)↗
DOE OSTI2022

Controlling polarization of spintronic THz emitter by remanent magnetization texture

Terahertz (THz) sciences and technologies have contributed to a rapid development of a wide range of applications and expanded the frontiers in fundamental science. Spintronic terahertz emitters offer conceptual advantages since the spin orientation in the magnetic layer can be easily controlled either by the externally applied magnetic field or by the internal magnetic field distribution determined by the specific shape of the magnetic elements. Here, we report a switchable terahertz source based on micropatterned magnetic heterostructures driven by femtosecond laser pulses. We show that the precise tunability of the polarization state is facilitated by the underlying magnetization texture of the magnetic layer that is dictated by the shape of the microstructure. These results also reveal the underlying physical mechanisms of a nonuniform magnetization state on the generation of ultrafast spin currents in the magnetic heterostructures. Our findings indicate that the emission of the linearly polarized THz waves can be switched on and off by saturating the sample using a biasing magnetic field, opening fascinating perspectives for integrated on-chip THz devices with wide-ranging potential applications.

Wu, Weipeng↗
DOE OSTI2024

Parallel pumping of magnons in inhomogeneous spin textures probed through NV spin relaxometry

We combine micromagnetic simulations and nitrogen-vacancy (NV) defect center spin relaxometry measurements to study magnon modes in inhomogeneous spin textures. A thin, micrometer-scale ferromagnetic disk is magnetized in a vortex state in which the magnetization curls around a central core. Micromagnetic simulations show that at zero applied field, the magnetization dynamics of the disk consist of a low frequency gyrotropic mode and higher frequency azimuthal magnon modes, all far detuned from the NV spin transition frequencies. An in-plane static magnetic field breaks the azimuthal symmetry of the vortex state, resulting in the magnon modes transforming in frequency and spatial profile as the field increases. Experimentally, we probe the dynamics of vortex magnetization as a function of applied in-plane static field and ac driving frequency by optically monitoring a nearby NV defect center spin. At certain values of the applied magnetic field, we observe enhanced spin relaxation when driving at twice the frequency of the NV ground state spin transition in optically detected magnetic resonance measurements. We attribute this effect to parallel pumping of a magnon mode in the disk producing magnons at half the excitation frequency. Micromagnetic simulations support this finding, showing spatial and spectral overlap of a confined magnon mode and an NV spin transition, with sufficient interaction strength to explain the observed signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Spin-textured Chern bands in AB-stacked transition metal dichalcogenide bilayers

Significance The long-wavelength moiré superlattices in twisted two-dimensional (2D) structures have emerged as a highly tunable platform for strongly correlated electron physics. In this work, we reveal the displacement field–induced topological moiré bands in AB-stacked transition-metal dichalcogenide (TMD) heterobilayer M o T e 2 / W S e 2 . Valley-contrasting Chern bands with nontrivial spin texture are formed from interlayer hybridization between M o T e 2 and W S e 2 bands of nominally opposite spins. The general mechanism for band inversion we uncovered in AB-stacked TMD bilayers is quite robust and can be applied to other material combinations as well. Our study establishes a recipe for creating topological bands in AB-stacked TMD bilayers in general, which provides a highly tunable platform for realizing quantum-spin Hall and interaction-induced quantum anomalous Hall effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Crystallographic texture formation in Fe-9wt%Si alloy during deformation and phase transition at high pressure

SUMMARY The seismic anisotropy of the Earth's solid inner core has been the topic of much research. It could be explained by the crystallographic preferred orientation (CPO) developing during convection. The likely phase is hexagonal close-packed iron (hcp), alloyed with nickel and some lighter elements. Here we use high energy synchrotron X-rays to study CPO in Fe-9wt%Si, uniaxially compressed in a diamond anvil cell in radial geometry. The experiments reveal that strong preferred orientation forms in the low-pressure body-centred cubic (bcc) phase that appears to be softer than pure iron. CPO is attributed to dominant {110}<111> slip. The onset of the bcc→hcp transition occurs at a pressure of ≈15 GPa, and the alloy remains in a two phase bcc + hcp state up to 40 GPa. The hcp phase forms first with a distinct {11$\bar{2}$0} maximum perpendicular to compression. Modelling shows that this is a transformation texture, which can be described by Burgers orientation relationship with variant selection. Experimental results suggest that bcc grains oriented with <100> parallel to compression transform into hcp first. The CPO of the hcp changes only slowly during further pressure and deviatoric stress increase at ambient temperature. After heating to 1600 K, a change in the hcp CPO is observed with alignment of (0001) planes perpendicular to compression that can be interpreted as dominant (0001)<11$\bar{2}$0> slip, combined with {10$\bar{1}$2}<$\bar{1}$011> mechanical twinning, which is similar to the deformation modes suggested previously for pure hcp iron at inner core conditions.

Vasin, Roman N.↗
DOE OSTI2020

Topological spin texture in Janus monolayers of the chromium trihalides Cr(I, X ) 3

Topological magnetic states are promising for ultradense memory and logic devices. Recent progress in two-dimensional magnets encourages the idea to realize topological states, such as skyrmions and merons, in freestanding monolayers. However, monolayers such as CrI 3 lack Dzyaloshinskii-Moriya interactions (DMIs) and thus do not naturally exhibit skyrmions/merons but rather a ferromagnetic state. Here we propose the fabrication of Cr(I, $X)_3$ Janus monolayers, in which the Cr atoms are covalently bonded to the underlying I ions and top-layer Br or Cl atoms. By performing first-principles calculations and Monte Carlo simulations, we identify strong enough DMIs, which leads to not only helical cycloid phases, but also to topologically nontrivial states, such as the intrinsic domain wall skyrmions in Cr(I, Br) 3 and the magnetic-field-induced bimerons in Cr(I, Cl) 3 . Finally, microscopic origins of such spin textures are revealed as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Energy storage in magnetic textures driven by vorticity flow

Here, an experimentally feasible energy-storage concept is formulated based on vorticity (hydro)dynamics within an easy-plane insulating magnet. The free energy associated with the magnetic winding texture is built up in a circular easy-plane magnetic structure by injecting a vorticity flow in the radial direction. The latter is accomplished by electrically induced spin-transfer torque, which pumps energy into the magnetic system in proportion to the vortex flux. The resultant magnetic metastable state with a finite winding number can be maintained indefinitely because the process of its relaxation via phase slips is exponentially suppressed when the temperature is brought well below the Curie temperature. We characterize the vorticity-current interaction underlying the energy-loading mechanism through its contribution to the effective electric inductance in the rf response. Our proposal may open an avenue for naturally powering spintronic circuits and nontraditional magnet-based neuromorphic networks.

36 MATERIALS SCIENCE↗
DOE OSTI2022

One-dimensional Rashba states with unconventional spin texture in Bi chains

Spin-polarized electrons confined in low-dimensional structures are of high interest for spintronics applications. Here, in this study, we investigate the electronic structure of an ordered array of Bi monomer and dimer chains on the Ag(110) surface. By means of spin-resolved photoemission spectroscopy, we find Rashba-Bychkov split bands crossing the Fermi level with one-dimensional constant energy contours. These bands are up-spin polarized for positive wave vectors and down-spin polarized for negative wave vectors, at variance with the Rashba-Bychkov model that predicts a pair of states with opposite spin in each half of the surface Brillouin zone. Density functional theory shows that spin-selective hybridization with the Ag bulk bands originates this unconventional spin texture.

1-dimensional spin chains↗
DOE OSTI2023

Symmetry-driven persistent spin texture for the two-dimensional nonsymmorphic CdTe and ZnTe crystal structures

In this paper, two nonsymmorphic two-dimensional structures of CdTe and ZnTe are modeled, and using state-of-the-art density functional theory with the group theory of solids, their symmetry-enforced electronic properties are studied. The in-plane ferroelectricity coupled with strong spin-orbit coupling induces a unidirectional out-of-plane Rashba spin-orbit field that can host a momentum-independent uniform spin configuration known as persistent spin texture (PST) at the Brillouin zone center. PST in these structures is found to be robust against external perturbations such as strain, structural distortion, and independent of layer thickness. These unprecedented intrinsic spin transport properties hold utmost importance in spintronics, as the experimental stringent condition of equal Rashba and Dresselhaus constants [Phys. Rev. Lett. 90, 146801 (2003)] is eliminated. The calculated persistent spin helix wavelength of <~5 nm paves the way for developing next-generation nanosized nonballistic spin field-effect transistors compared with micrometer-sized GaAs/AlGaAs quantum wells. Further, these materials exhibit finite spin Hall conductivity at the band edges and hence can be used in ferromagnet-free spin Hall transistors. Although CdTe and ZnTe systems have been widely studied for photocatalysis and solar cell applications over the past few decades, their potential application in spintronic devices has not been explored. Mono/few layers of CdTe and ZnTe synthesized from (110) facets of bulk zinc-blende crystals [Nat. Commun. 3, 1057 (2012)] satisfy all symmetry operations of the nonsymmorphic space group and hence can be considered ideal materials to verify our theoretical results experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Laser angle-resolved photoemission as a probe of initial state k z dispersion, final-state band gaps, and spin texture of Dirac states in the Bi 2 Te 3 topological insulator

Here, we have obtained angle-resolved photoemission (ARPES) spectra from single crystals of the topological insulator material Bi 2 Te 3 using tunable laser spectrometer. The spectra were collected for eleven different photon energies ranging from 5.57 to 6.70 eV for incident light polarized linearly along two different in-plane directions. Parallel first-principles, fully relativistic computations of photo-intensities were carried out using the experimental geometry within the framework of the one-step model of photoemission. Good overall accord between theory and experiment is used to gain insight into how properties of the initial and final state band structures as well as those of the topological surface states and their spin-textures are reflected in the laser-ARPES spectra. In conclusion, our analysis reveals that laser-ARPES is sensitive to both the initial state k z dispersion and the presence of delicate gaps in the final state electronic spectrum.

36 MATERIALS SCIENCE↗