Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Hf{sub 3}Fe{sub 4}Sn{sub 4} and Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x}: Two stannide intermetallics with low-dimensional iron sublattices

This article reports two new Hf-rich intermetallics synthesized using Sn flux: Hf{sub 3}Fe{sub 4}Sn{sub 4} and Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x}. Hf{sub 3}Fe{sub 4}Sn{sub 4} adopts an ordered variant the Hf{sub 3}Cu{sub 8} structure type in orthorhombic space group Pnma with unit cell edges of a=8.1143(5) Å, b=8.8466(5) Å, and c=10.6069(6) Å. Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x}, on the other hand, adopts a new structure type in Cmc2{sub 1} with unit cell edges of a=5.6458(3) Å, b=35.796(2) Å, and c=8.88725(9) Å for x=0. It exhibits a small amount of phase width in which Sn substitutes on one of the Fe sites. Both structures are fully three-dimensional and are characterized by pseudo one- and two-dimensional networks of Fe–Fe homoatomic bonding. Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x} exhibits antiferromagnetic order at T{sub N}=46(2) K and its electrical transport behavior indicates that it is a normal metal with phonon-dictated resistivity. Hf{sub 3}Fe{sub 4}Sn{sub 4} is also an antiferromagnet with a rather high ordering temperature of T{sub N}=373(5) K. Single crystal resistivity measurements indicate that Hf{sub 3}Fe{sub 4}Sn{sub 4} behaves as a Fermi liquid at low temperatures, indicating strong electron correlation. - Graphical abstract: Slightly different growth conditions in Sn flux produce two new intermetallic compounds: Hf{sub 3}Fe{sub 4}Sn{sub 4} and Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x}. - Highlights: • Single crystals of both Hf{sub 3}Fe{sub 4}Sn{sub 4} and Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x} were grown using Sn flux. • The crystal structures were determined using single crystal X-ray diffraction. • The Fe moments in Hf{sub 3}Fe{sub 4}Sn{sub 4} display AFM order below T{sub N}=373 K. • The Fe moments in Hf{sub 9}Fe{sub 4−x}Sn{sub 10+x} display AFM order below T{sub N}=46 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and magnetic properties of the two polymorphs of novel S=1 osmate; Li{sub 4}MgOsO{sub 6}

Li{sub 4}MgOsO{sub 6} was synthesized by two different solid-state reaction procedures. The crystal structures were determined by X-ray powder diffraction technique and it was revealed that Li{sub 4}MgOsO{sub 6} crystallizes in two different crystal symmetries in ordered rock salt structure type, namely monoclinic C2/m and orthorhombic Fddd. The unit cell constants for the monoclinic system are a=5.1074(4) Å, b=8.8182(4) Å, c=5.0902(2) Å, and β=109.845(4)° and those of the orthorhombic structure are a=5.8485(1) Å, b=8.3821(1) Å, and c=17.6212(3) Å. In both systems, Os{sup 6+} ions reside exclusively in a specific crystallographic position while Li{sup +} and Mg{sup 2+} ions exhibit mix occupancy. The temperature dependent magnetic susceptibility data for both S=1 osmate systems do not support the occurrence of any magnetic transition down to 2 K. The Curie–Weiss fit to the paramagnetic regime of the magnetic susceptibility data reveal highly negative θ value (−114.81 K and −121.87 K for C2/m and for Fddd systems, respectively), which are indicative of predominant antiferromagnetic (AFM) interactions in both systems. The experimental effective magnetic moment (μ{sub eff}) value for the monoclinic phase is 2.13 μB and that of the orthorhombic system is 2.34 μB. Due to the rather strong AFM interactions and lack of magnetic transition down to 2 K, both of these novel osmates are placed in the class of highly frustrated magnets. Low temperature magnetic susceptibility (below 2 K) and dynamic magnetic properties studies (μsr studies) are in order to better understand the magnetic ground states of these two polymorphs of Li{sub 4}MgOsO{sub 6}. - Graphical abstract: The structural transformation between two modifications of highly frustrated Li{sub 4}MgOsO{sub 6}. - Highlights: • Li4MgOsO{sub 6} was synthesized in two different crystal systems. • The monoclinic variant crystallizes in C2/m space group, while the orthorhombic version forms in Fddd space group. • The Os{sup 6+} ions are fully ordered while Li{sup +} and Mg{sup 2+} are mixed occupied. • These systems are the first Os{sup 6+} compounds in ordered NaCl structure type. • Both compounds exhibit high degree of geometric magnetic frustration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of chemical doping on the magnetic state of the Sr{sub 2}YRuO{sub 6} double perovskite

The impact of chemical doping of the type Sr{sub 2−x}A{sub x}YRuO{sub 6} (A=Ca, Ba) on the low temperature magnetic properties of Sr{sub 2}YRuO{sub 6}, probed using variable temperature magnetic susceptibility, neutron diffraction and heat capacity measurements, are described. Specific-heat measurements of un-doped Sr{sub 2}YRuO{sub 6} reveal two features at ∼26 and ∼30 K. Neutron scattering measurements at these temperatures are consistent with a change from a 2D ordered state to the 3D type 1 AFM state. Magnetic and structural studies of a number of doped oxides are described that highlight the unique low temperature behavior of Sr{sub 2}YRuO{sub 6} and demonstrate that doping destabilizes the intermediate 2D ordered state. - Graphical abstract: Neutron diffraction measurements of the ordered double perovskite Sr{sub 2}YRuO{sub 6}reveal a with a change from a 2D ordered state to the 3D type 1 AFM state upon cooling. The impact of chemical doping Sr{sub 2−x}A{sub x}YRuO{sub 6} (A=Ca, Ba) on the low temperature magnetic properties have also been investigated and these highlight the unique low temperature behavior of Sr{sub 2}YRuO{sub 6} with doping destabilizing the intermediate 2D ordered state. - Highlights: • Crystal and Magnetic Structure of Sr{sub 2}YRuO{sub 3} was studied using Neutron Diffraction. • Effect of doping on the magnetic ground state established. • Origin of two low temperature transitions discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contribution to crystallographic slip assessment by means of topographic measurements achieved with atomic force microscopy

In this paper, atomic force microscopy (AFM) is used to quantitatively characterize the plastic glide occurring during tensile deformation of a duplex 2205 stainless steel sample. We demonstrate that an appropriate treatment of the topographic image issued from AFM measurements allows precise and quantitative information about the characteristics of plastic deformation and especially the amount of crystallographic slip.

36 MATERIALS SCIENCE↗

Analysis of atomic force microscopy data for surface characterization using fuzzy logic

In this paper we present a methodology to characterize surface nanostructures of thin films. The methodology identifies and isolates nanostructures using Atomic Force Microscopy (AFM) data and extracts quantitative information, such as their size and shape. The fuzzy logic based methodology relies on a Fuzzy Inference Engine (FIE) to classify the data points as being top, bottom, uphill, or downhill. The resulting data sets are then further processed to extract quantitative information about the nanostructures. In the present work we introduce a mechanism which can consistently distinguish crowded surfaces from those with sparsely distributed structures and present an omni-directional search technique to improve the structural recognition accuracy. In order to demonstrate the effectiveness of our approach we present a case study which uses our approach to quantitatively identify particle sizes of two specimens each with a unique gold nanoparticle size distribution. - Research Highlights: {yields} A Fuzzy logic analysis technique capable of characterizing AFM images of thin films. {yields} The technique is applicable to different surfaces regardless of their densities. {yields} Fuzzy logic technique does not require manual adjustment of the algorithm parameters. {yields} The technique can quantitatively capture differences between surfaces. {yields} This technique yields more realistic structure boundaries compared to other methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water droplet behavior on superhydrophobic SiO{sub 2} nanocomposite films during icing/deicing cycles

This work investigates water droplet behavior on superhydrophobic (water contact angle value of 162 ± 1°) SiO{sub 2} nanocomposite films subjected to repetitive icing/deicing treatments, changes in SiO{sub 2} nanocomposite film surface morphology and their non-wetting characteristics. During the experiment, water droplets on SiO{sub 2} nanocomposite film surface are subjected to a series of icing and deicing cycles in a humid (∼ 70% relative humidity) atmosphere and the resulting morphological changes are monitored and characterized using atomic force microscopy (AFM) and contact angle measurements. Our data show that the formation of the frozen or thawed water droplet, with no further shape change, on superhydrophobic SiO{sub 2} nanocomposite film, is obtained faster within each cycle as the number of the icing/deicing cycles increases. After 10 icing and deicing cycles, the superhydrophobic SiO{sub 2} nanocomposite film had a water contact angle value of 146 ± 2° which is effectively non-superhydrophobic. AFM analysis showed that the superhydrophobic SiO{sub 2} nanocomposite film surface area under the water droplet undergoes gradual mechanical damage during the repetitive icing/deicing cycles. We propose a possible mechanism of the morphological changes to the film surface that take place during the consecutive icing/deicing experiments. - Highlights: • Superhydrophobic film is subjected to repetitive icing/deicing treatments. • Water droplet shape transition is recorded and characterized thereafter. • Atomic force microscopy and contact angle measurements are performed. • The surface undergoes gradual mechanical damage during repetitive icing/deicing. • Mechanism for the observed surface morphological changes is suggested.

36 MATERIALS SCIENCE↗

Study of morphology and magnetic properties of the HoNi{sub 3} crystalline and ball-milled compound

The morphology and magnetic properties of the HoNi{sub 3} crystalline and ball-milled intermetallic compounds are presented. The polycrystalline HoNi{sub 3} bulk compound crystallizes in the rhombohedral PuNi{sub 3} — type of crystal structure and indicates ferrimagnetic arrangement with the Curie temperature of T{sub C} = 57 ± 2 K, the helimagnetic temperature T{sub h} = 23 ± 2 K with the total saturation magnetic moment of 6.84 μ{sub B}/f.u. at 2 K. The use of the ball-milling method leads to the formation of HoNi{sub 3} nanoflakes with typical thickness of less than 100 nm prone to agglomeration upon milling. The increase of grinding duration leads to the reduction in crystallite size, which was confirmed by various complementary microscopical and diffraction studies. Moreover, the increase in milling duration results in the emergence of the relatively small coercivity (H{sub C}), remanence (M{sub r}) and a variation of the saturation magnetization (M{sub S}). - Graphical abstract: Display Omitted - Highlights: • The ball-milling method exhibits significant potential for producing RT{sub 3} nanopowders. • The AFM method was used for the first time in analysis of R–T nanoflakes morphology. • HoNi{sub 3} compound forms polycrystalline and textured nanoflakes evolving upon milling. • The decrease in crystallite size via grinding is confirmed by XRD, TEM and AFM. • The magnetic parameters were sensitive to the extension of pulverization b.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C

Ni-based superalloy Haynes 230 is used in many applications such as very high temperature reactor (VHTR) or solid oxide fuel cells (SOFCs) where it is exposed to high temperature service environment. In order to improve the resistance for high temperature oxidation, the effect of crystallographic orientation on the early stage oxidation was investigated. It was demonstrated that different oxide thicknesses are formed on grains having different orientations. Comparison of electron backscatter diffraction (EBSD) orientation maps before and after oxidation at 900 °C indicates that grains near (111) orientation, especially with the deviation angle from <111> that is smaller than 20°, are more oxidation resistant than grains of other orientations. Correlation between the results of electron backscatter diffraction (EBSD) and atomic force microscopy (AFM) was used to compare the oxidation rate of grains having different crystallographic orientation. The oxidation rate was found to change with the crystallographic orientation as follows (111) < (110) < (100), also it was demonstrated that the oxidation rate changes are a nearly linear function of the angle of deviation from <111> direction. The morphology of surface oxide also depends on the orientation of grains. - Highlights: • Comparison of EBSD maps before and after oxidation allows to investigate the effect of orientation on oxidation in a more direct way; • Effect of crystallographic orientation on oxidation behavior of alloy 230 is studied by combination of EBSD and AFM; • Different thickness of oxide is formed on grain with different orientation and dependence of anisotropic oxidation behavior is discussed; • The morphology of grains is also orientation dependence.

36 MATERIALS SCIENCE↗

Effect of Nb micro-alloying on microstructure and properties of thermo-mechanically processed high carbon pearlitic steel

Highlights: • Effect of Nb micro-alloying on high carbon steels has been established. • Fine and degenerated pearlite with fine PAGS is achieved due to Nb micro-alloying. • AFM study indicates true interlamellar spacing which conforms well to TEM study. • Hardness and yield strength have been obviously improved with the addition of Nb. - Abstract: Two C-Mn-Si steels with and without Nb micro-alloying are selected in the present study. Both these high carbon steels have been thermo-mechanically processed using Gleeble 3800 simulator. Optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), atomic force microscope (AFM) were utilised for microstructural characterisation. The austenitising temperature was varied from 1150 °C to 1200 °C followed by hot compression and subjected to free cooling to evaluate the influence of austenite grain size on transformed microstructure and mechanical properties. It is evident that higher austenite grain size is obtained for both types of steels subjected to higher austenitising temperature. The refinement of pearlite interlamellar spacing (<0.20 μm) with degenerated morphology as well as finer prior austenite grain size (<40 μm) is found to be more prominent for Nb micro-alloyed sample. The average hardness values of both the steels are higher for the specimens, treated at a higher austenitising temperature which is attributed to finer interlamellar spacing. Finally, the correlation between the evolving microstructure and resulting mechanical properties (hardness and yield strength) has been made.

36 MATERIALS SCIENCE↗

{sup 93}Nb NMR and Fe{sup 3+} EPR study of local magnetic properties of magnetoelectric Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3}

The {sup 93}Nb NMR and Fe{sup 3+} EPR spectra of a magnetoelectric Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} (PFN) single crystal as well as of PFN ceramics and nanopowder have been measured. The relation between the chemical disorder and the local magnetic structure has been determined. The data show the occurrence of an antiferromagnetic (AFM) phase transition at 145 and 135 K in both single crystal and ceramic samples, respectively. The AFM phase transition is however essentially smeared out in the nanopowder. Two different Nb sites exist which have different local magnetic fields which are essentialy distributed in value. These two Nb sites correspond to different types of 'chemical' order: Fe rich, Nb poor and Fe poor, Nb rich regions. The temperature dependences of the sublattice magnetizations and the values of the superhyperfine fields at the Nb ions are obtained. NMR data suggest that a spin-glass like state of PFN below T = 20 K arises from the Fe poor, Nb rich regions.

36 MATERIALS SCIENCE↗

Silver nanoparticle production by Rhizopus stolonifer and its antibacterial activity against extended spectrum {beta}-lactamase producing (ESBL) strains of Enterobacteriaceae

Highlights: {yields} Silver nanoparticle production by using Rhizopus stolonifer. {yields} Antibacterial activity of silver nanoparticles against extended spectrum {beta}-lactamase producing (ESBL) strains of Enterobacteriaceae. {yields} Synergistic effect of antibiotics with silver nanoparticles towards ESBL-strains. {yields} Characterization of silver nanoparticles made by UV-vis spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformed infrared (FTIR) spectroscopy, atomic force microscopy (AFM). -- Abstract: This report focuses on the synthesis of silver nanoparticles using the fungus, Rhizopus stolonifer and its antimicrobial activity. Research in nanotechnology highlights the possibility of green chemistry pathways to produce technologically important nanomaterials. Characterization of newly synthesized silver nanoparticles was made by UV-visible absorption spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and atomic force microscope (AFM). TEM micrograph revealed the formation of spherical nanoparticles with size ranging between 3 and 20 nm. The biosynthesized silver nanoparticles (AgNPs) showed excellent antibacterial activity against ESBL-strains which includes E. coli, Proteus. sp. and Klebsiella sp.

36 MATERIALS SCIENCE↗

Controlling the crystallite size and influence of the film thickness on the optical and electrical characteristics of nanocrystalline Cu{sub 2}S films

Highlights: Black-Right-Pointing-Pointer Modification of the preparation technique in order to deposit nanostructure Cu{sub 2}S thin films. Black-Right-Pointing-Pointer Controlling the crystallite size of the prepared films. Black-Right-Pointing-Pointer Study the surface morphology, optical and electrical characteristics of Cu{sub 2}S films. -- Abstract: In this work, Cu{sub 2}S nanocrystalline films have been successfully prepared using dip-coating technique. The stoichiometry and the structural characteristics of the prepared films were characterized by energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD), respectively. The surface morphology of the deposited Cu{sub 2}S film was studied using both the scanning electron microscopy (SEM) and the atomic force microscopy (AFM). The SEM and AFM images indicate that the prepared Cu{sub 2}S films are characterized by a well-dispersed and highly dense with spherical like-shaped aggregates of size in the nano scale. The optical absorption measurements indicate that the Cu{sub 2}S nanoparticles have a direct band gap of 2.92 eV. The dispersion and absorption parameters such as the dispersion energy, oscillating energy, real and imaginary dielectric constants and dissipation factor were calculated within a wide wavelength range of the spectrum that indicates the suitability of the deposited films as solar absorber using this technique. The dark electrical resistivity ({rho}) measurements were carried out at different temperatures in the range 312-440 K. These results confirm the semiconducting characteristic of the prepared Cu{sub 2}S films. Moreover, two activation energies were obtained that indicate the presence of two dominating conduction mechanisms in these temperature ranges. The bulk electrical resistivity ({rho}{sub B}) and the mean free path (l{sub 0}) of charge carriers were estimated from the resistivity-thickness dependence. The heterojunction device of n-ZnCdS/p-Cu{sub 2}S behaves good rectifying property. The photovoltaic characteristic of the heterojunction device using the current-voltage characteristic under illumination of 100 mW/cm{sup 2} was also observed. Discussion of the obtained results and their comparison with the previous published data were also considered.

36 MATERIALS SCIENCE↗

Comparative study of NiFe{sub 2−x}Al{sub x}O{sub 4} ferrite nanoparticles synthesized by chemical co-precipitation and sol–gel combustion techniques

Graphical abstract: AFM images of NiFe{sub 2}O{sub 4} ferrite nanoparticles at room temperature synthesized by sol–gel technique. Highlights: ► Particle size reduces to less than 30 nm. ► DC electrical resistivity increases with substitution of Cr{sup 3+}. ► Dielectric constant decreases. -- Abstract: A series of aluminum substituted Ni-ferrite nanoparticles have been synthesized by chemical co-precipitation and sol–gel techniques. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR), DC electrical resistivity and dielectric properties. Analysis of the X-ray diffraction pattern of all the samples confirmed the formation of spinel structure. The crystallite sizes remain within the range 25–41 ± 3 nm. FTIR measurements show two fundamental absorption bands, assigned to the vibration of tetrahedral and octahedral sites. DC electrical resistivity increases from 6.60 × 10{sup 7} to 6.9 × 10{sup 10} Ω cm as the Al{sup 3+} concentration increases from 0.00 to 0.50. The dielectric constant and loss tangent decreases with increasing Al{sup 3+} concentration from 22 to 14, 0.354 to 0.27 respectively at 5 MHz for all the samples. Impedance measurements as a function of frequency (1 kHz–5 MHz) at room temperature further helped in analyzing the electrical properties of the prepared samples.

36 MATERIALS SCIENCE↗

Crystal growth and photoluminescence characteristics of Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 3+} thin films grown by pulsed laser deposition

Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 3+} films were deposited on Al{sub 2}O{sub 3} (0 0 0 1) substrates by pulsed laser deposition. The films were grown at various oxygen pressures ranging from 100 to 400 mTorr. The crystallinity and surface morphology of the films were examined by X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. XRD and AFM respectively showed that the Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 3+} films had a zircon structure and consisted of homogeneous grains ranging from 100 to 400 nm depending on the deposition conditions. The radiation emitted was dominated by a red emission peak at 620 nm. The maximum PL intensity of the Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 3+} films grown at 300 mTorr was increased by a factor of 1.3 compared to that of Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 3+} films grown at 100 mTorr. The crystallinity, surface roughness and photoluminescence of the thin-film phosphors were strongly dependent on the deposition conditions, in particular, the oxygen partial pressure.

36 MATERIALS SCIENCE↗

On photo-expansion and microlens formation in (GeS{sub 2}){sub 0.74}(Sb{sub 2}S{sub 3}){sub 0.26} chalcogenide glass

Graphical abstract: Display Omitted Highlights: ► Photo-expansion induced by sub-band-gap photons in GeSbS glass. ► One-step microlens formation. ► The topography of the microlenses detected by AFM and DHM. ► The good mechanical characteristics of the microlenses were obtained. ► Local light-induced overheating of the glass. -- Abstract: Photo-expansion of the bulk of (GeS{sub 2}){sub 0.74}(Sb{sub 2}S{sub 3}){sub 0.26} glass induced by sub-gap photons is studied employing specifically atomic force microscopy (AFM) namely an atomic force acoustic microscopy (AFAM) and a force spectroscopy and digital holographic microscopy. The results are discussed with respect to the possible role of light induced overheating in the process of photo-expansion.

36 MATERIALS SCIENCE↗

Nano-crystalline p-ZnGa{sub 2}Te{sub 4}/n-Si as a new heterojunction diode

Graphical abstract: Display Omitted Highlights: ► ZnGa{sub 2}Te{sub 4}/Si thin film was prepared by thermal evaporation technique. ► XRD and AFM graphs support the nano-crystalline of the studied device. ► Dark current–voltage characteristics of the heterojunction diode were investigated. ► Electrical parameters and conduction mechanism were determined. ► Conduction mechanisms were controlled by TE, SCLC and TCLC. -- Abstract: In this communication, ZnGa{sub 2}Te{sub 4} thin film was prepared by thermal evaporation technique on n-Si substrate. P-ZnGa{sub 2}Te{sub 4}/n-Si heterojunction diode was fabricated. The structure of ZnGa{sub 2}Te{sub 4} thin film was checked by XRD pattern and confirmed by AFM micrographs. The dark current–voltage characteristics of the heterojunction diode were investigated to determine the electrical parameters and conduction mechanism as a function of forward and reverse biasing conditions in the range (−10 V to 10 V) at temperature interval (303–423 K). The conduction mechanism was controlled by thermionic emission, space charge limited (SCLC) and trap-charge limited current (TCLC) mechanisms. The basic parameters such as the series resistance R{sub s}, the shunt resistance R{sub sh}, the ideality factor n and the barrier height φ{sub b} of the diode, the total density of trap states N{sub 0} and the exponential trapping distribution P{sub o} were determined. The obtained results showed that ZnGa{sub 2}Te{sub 4} is a good candidate for the applications of electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A chemical approach toward low temperature alloying of immiscible iron and molybdenum metals

Graphical abstract: - Highlights: • Low temperature pyrolysis of [Fe(bipy){sub 3}]Cl{sub 2} and [Mo(bipy)Cl{sub 4}] homogeneous powder. • Easy low temperature alloying of immiscible metals like Fe and Mo. • Uniform sized Fe–Mo nanoalloy with particle size of 48–68 nm. • Characterization by EDXRF, AFM, XRPD, magnetometery, {sup 57}Fe Mössbauer and impedance. • Alloy behaves as almost superparamagnetic obeying simple –R(CPE)– circuit. - Abstract: The present research is based on a low temperature operated feasible method for the synthesis of immiscible iron and molybdenum metals’ nanoalloy for technological applications. The nanoalloy has been synthesized by pyrolysis of homogeneous powder precipitated, from a common solvent, of the two complexes, trisbipyridineiron(II)chloride, [Fe(bipy){sub 3}]Cl{sub 2}, and bipyridinemolybedenum(IV) chloride, [Mo(bipy)Cl{sub 4}], followed by heating at 500 °C in an inert atmosphere of flowing argon gas. The resulting nanoalloy has been characterized by using EDXRF, AFM, XRD, magnetometery, {sup 57}Fe Mössbauer and impedance spectroscopies. These results showed that under provided experimental conditions iron and molybdenum metals, with known miscibility barrier, alloy together to give (1:1) single phase material having particle size in the range of 48–66 nm. The magnetism of iron is considerably reduced after alloy formation and shows its trend toward superparamagnetism. The designed chemical synthetic procedure is equally feasible for the fabrication of other immiscible metals.

36 MATERIALS SCIENCE↗

A biotemplated nickel nanostructure: Synthesis, characterization and antibacterial activity

Highlights: • Nickel nanostructure-encapsulated bacteria were prepared using electroless deposition. • Bacterium surface was activated by red-ox reaction of its surface amino acids. • Interfacial changes at cell surfaces were investigated using fluorescence spectroscopy. • TEM and AFM depicted morphological changes. • Antibacterial activity of nanostructure was examined against different bacteria strains. - Abstract: Nickel nanostructure-encapsulated bacteria were prepared using the electroless deposition procedure and activation of bacterium cell surface by red-ox reaction of surface amino acids. The electroless deposition step occurred in the presence of Ni(II) and dimethyl amine boran (DMAB). Interfacial changes at bacteria cell surfaces during the coating process were investigated using fluorescence spectroscopy. Fluorescence of tryptophan residues was completely quenched after the deposition of nickel onto bacteria surfaces. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) depicted morphological changes on the surface of the bacterium. It was found that the Ni coated nanostructure was mechanically stable after ultrasonication for 20 min. Significant increase in surface roughness of bacteria was also observed after deposition of Ni clusters. The amount of coated Ni on the bacteria surface was calculated as 36% w/w. The antibacterial activity of fabricated nanostructure in culture media was examined against three different bacteria strains; Escherichia coli, Bacillus subtilis and Xantomonas campestris. The minimum inhibitory concentrations (MIC) were determined as 500 mg/L, 350 mg/L and 200 mg/L against bacteria, respectively.

36 MATERIALS SCIENCE↗