Search NASA⌕ Search

SEARCH · Search NASA

Results for “AUTOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Structure, Morphology, Cation Distribution and Magnetic Properties of Cr{sup 3+}-Substituted CoFe{sub 2}O{sub 4} Nanoparticles

The present investigations deal with the effect of trivalent chromium ions (Cr{sup 3+}) on structural and magnetic properties of nanocrystalline cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles. The samples of CoCr{sub x}Fe{sub 2−x}O{sub 4} (where x = 0.0 to 1.0 in step of 0.2) were successfully synthesized by citric acid-assisted sol-gel auto combustion method. Further, the prepared samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR) and pulsed field hysteresis loop technique for structural, morphological and magnetic properties analysis, respectively. XRD patterns showed the formation of single-phase cubic spinel structure with broad Bragg’s peak for all the samples. The value of lattice parameter was found to be decreased with chromium substitution x. Cation distribution studies revealed that Co{sup 2+} and Fe{sup 3+} occupied both A and B sites, whereas Cr{sup 3+} ions occupied only B site. SEM analysis of the prepared samples confirmed the nanocrystalline nature of the material. The two absorption bands belonging to spinel structure were observed in IR spectra. Saturation magnetization (M{sub S}), remanence magnetization (M{sub r}) and coercivity (H{sub C}) was found to be decreased with increase in chromium substitution x.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of Microstructural and Magnetic Properties of BaV{sub x}Fe{sub 12−x}O{sub 19} Nanohexaferrites

Nanohexaferrites of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) were prepared using sol–gel auto-combustion. The structure and morphology of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) nano-sized hexaferrites were explored by X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDXS. XRD analysis indicated particle size in the 55–60-nm interval. SEM and EDXS investigations confirmed the formation of the desired composition of V-substituted Ba-hexaferrites. The magnetic properties of products were studied. The magnetic M(H) hysteresis loops revealed that all produced nanohexaferrites display ferromagnetic-like comportment. The deduced saturation magnetization (M{sub s}), retentivity (M{sub r}), magneto-crystalline anisotropy fields (H{sub a}), and coercive field (H{sub c}) were enhanced for low V{sup 3+} contents and were maximum for BaV{sub 0.04}Fe{sub 11.96}O{sub 19} (x = 0.04) nanohexaferrites, showing the strengthening of magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Magnetic Behavior of BaAl{sub x}Cr{sub y}Fe{sub 11}O{sub 19} (x + y = 1) Hexagonal Ferrites

The present study aims to analyze barium hexagonal ferrite and its derivation behavior using sol-gel auto-combustion co-doped with Al{sup 3+}/Cr{sup 3+}ions. Also, the effects of dopants on structural and magnetic properties of prepared samples were investigated. To this purpose, the finest powders were preheated at 500 °C for 1 h and calcinated at 900 °C about 2 h. Then, the magnetic powders were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), and vibrating sample magnetometer (VSM). The XRD patterns show the magnetoplumbite phase. According to the Scherrer equation applied, inserting ions led to a decrease in lattice parameters (a and c) and crystallite size. The morphology of synthesized samples was observed by FESEM and proved the hexagonal shapes of the prepared samples. The nanoparticles sizes were recorded between 59 and 79 nm. Moreover, the magnetic properties of prepared samples were specified by VSM. The saturation magnetization (M{sub s}) and remnant magnetization (M{sub r}) of the synthesized magnetic powders were decreased by inserting Al{sup 3+}/Cr{sup 3+} ions, while coercivity (H{sub c}) increased from 5215 to 7178 Oe. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Co{sup 2+} Substituted ZnCuFe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.5) Ferrites: Synthesis, Magneto-structural and Optical Properties for Their Photocatalytic Performance

The cobalt (Co{sup 2+}) has been successively substituted in ZnCuFe{sub 2}O{sub 4} to obtain Zn{sub 0.5−x}Co{sub x}Cu{sub 0.5}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.5) ferrites by auto-combustion technique. Prior to photocatalytic degradation, all as-synthesized ferrites were characterized to study their structure, composition, morphology, magnetic and optical behavior. The shifting of tetrahedral as well as octahedral stretching peaks towards higher frequencies observed in the Fourier transform infrared spectroscopy indicates that Co{sup 2+} ion is substituted in ZnCuFe{sub 2}O{sub 4}. X-ray diffraction pattern confirms the formation of single-phase cubic spinel with decrease in average lattice constant from 8.3915 to 8.3224 Å with increase in Co{sup 2+} substitution. The photocatalytic performance of obtained ferrite catalyst was determined using methylene blue (MB) as model dye under visible light and direct sunlight. The degradation of MB with as-obtained photocatalyst under sunlight improves (91%) which proves the effective utilization of visible light active magnetic photocatalyst.

36 MATERIALS SCIENCE↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗

Effects of Mg Substitution on the Structural and Magnetic Properties of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} Nanoparticle Ferrites

Sol-gel auto-combustion is a method of preparing ferrite by combining combustion with chemical gel. In this study, Ni-Mg-Co ferrite powders are prepared by coprecipitation method, and the nanocrystals of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} are successfully synthesized. The structure and magnetic properties of undoped and Mg-substituted Ni-Co ferrite nanoparticles are systematically investigated. The methods used to characterize the prepared samples are X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and Vibrating sample magnetometry (VSM). The synthesized samples are confirmed by XRD analysis to form a single-phase cubic spinel structure with crystals between 48 and 50 nm. With the increase of Mg ion concentration, the lattice constant decreases. The results of FTIR spectroscopy indicated that a spinel structure was formed. Transmission electron microscopy (TEM) images show spherical cubic microcrystals in the samples. EDX analysis confirms that the synthesized ferrite is pure phase structure, and Mg{sup 2+} is successfully replaced. With the increase of Mg{sup 2+} ion content, the saturation magnetization and remanent magnetization decreased from 70.16 to 39.77 emu/g and 36.40 to 20.20 emu/g at room temperature, respectively. Meanwhile, the coercivity decreases from 1032.16 to 378.50 Oe by increasing Mg{sup 2+} concentration. This also indicates that the Mg-substituted Ni-Co nano-ferrite has a low magnetic of multi-ferric material. The increasing of peak height of dM/dH at H{sub m} indicates that the cubic spinel structure sample has good crystallinity and magnetic stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Weak Ferroelectricity and Leakage Current Behavior of Multiferroic CoCr{sub 2}O{sub 4} Nanomaterials

Multiferroic CoCr{sub 2}O{sub 4} is synthesized by low-temperature sol-gel auto combustion technique. High energy synchrotron x-ray diffraction pattern confirms the single-phase cubic structure with space group Fd3m. Average crystallite size (17.91 nm) and negative micro-strain (9.86 × 10{sup −4}) are estimated by Williamson–Hall (W-H) plot. FTIR confirms the formation of spinel metal oxide-based cobalt chromites. The strong decrease in ε′ and tan δ at higher frequency can be interpreted by Maxwell-Wagner-type interfacial polarization. Weak ferroelectricity is mainly attributed to the partial reversal of polarization. J-E characteristic reveals the Ohmic (I–V) and Child’s square law (I–V{sup 2}) behavior observed in CoCr{sub 2}O{sub 4} nanomaterials with slope value ~ 1.04 and ~ 1.6, respectively. The conduction process for the leakage current density is interpreted using the space-charge limited current (SCLC) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Electrical, and Magnetic Properties of Ferrite-Reinforced PANI Composites

A Y-type hexagonal ferrite with chemical composition CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} was prepared by a sol-gel auto combustion technique. Y-ferrite/PANI nanocomposites were prepared by in situ polymerization of PANI with general formula CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} (1-x) + PANI (x) (x = 0.30, 0.50, 0.8, and 1) with nomenclature CF1, CF2, CF3, and P respectively. The samples were characterized by X-ray diffraction (XRD) and electrical and magnetic measurements. X-ray diffraction revealed that Y-type ferrite was successfully prepared in a single phase form. DC resistivity increases with increasing ferrite filler in nanocomposites due to large resistive behavior of ferrite in conducting polymer matrix. The dielectric constant, dielectric loss, and AC conductivity decreases with the increase of ferrite content. The dielectric is high due to interfacial polarization at low frequency, and it is low at high frequency following Maxwell-Wagner model. The coercivity increases with the decrease of ferrite filler content whereas saturation magnetization and remanence decreases which is due to random distribution of ferrite filler particles in PANI matrix. Due to large coercivity and low values of ε′ and ε″, the present samples may be useful in recording media and electromagnetic shielding.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation Between Structural, Magnetic and Dielectric Properties of Microwave Sintered Ni-Zn-Al Nanoferrites

A series of diamagnetic aluminum (Al{sup 3+}) substituted Ni-Zn Nanoferrites have been synthesized using sol-gel auto combustion route. Structural, magnetic, and dielectric properties were systematically studied and reported with respect to Al{sup 3+} substitution in host Fe{sup 3+} ions. X-ray diffraction (XRD) and infrared spectroscopy (IR) measurements confirm the presence of Al{sup 3+} ions at both A and B sites. Cation distribution proposed from XRD and IR correlates with magnetic and dielectric results. It is observed that Al{sup 3+} ions are distributed in to tetrahedral and octahedral sub-lattices. The saturation magnetization varies between 58.5 and 44.2 emu/g with increasing Al{sup 3+} substitution. This decrease in magnetization is ascribed to presence of the non-collinear spin (canted spin) structure in octahedral sub-lattice. Dielectric constant decreased and a significant improvement in AC resistivity is observed with Al{sup 3+} substitution. The observed variations are accounted on the basis of cation distribution in spinel ferrite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

RESOLUTION OF URANIUM ISOTOPES WITH KINETIC PHOSPHORESCENCE ANALYSIS

This study was conducted to test the ability of the Chemchek™ Kinetic Phosphorescence Analyzer Model KPA-11 with an auto-sampler to resolve the difference in phosphorescent decay rates of several different uranium isotopes, and therefore identify the uranium isotope ratios present in a sample. Kinetic phosphorescence analysis (KPA) is a technique that provides rapid, accurate, and precise determination of uranium concentration in aqueous solutions. Utilizing a pulsed-laser source to excite an aqueous solution of uranium, this technique measures the phosphorescent emission intensity over time to determine the phosphorescence decay profile. The phosphorescence intensity at the onset of decay is proportional to the uranium concentration in the sample. Calibration with uranium standards results in the accurate determination of actual concentration of the sample. Different isotopes of uranium, however, have unique properties which should result in different phosphorescence decay rates seen via KPA. Results show that a KPA is capable of resolving uranium isotopes.

Miley, Sarah M.↗

Radiolytic degradation of 240 Plutonium and 242 Plutonium oxalates

Raman, FTIR, and diffuse reflectance spectroscopy were used to study the auto-radiolytic degradation of 240 Pu and 242 Pu oxalates. The significant differences in the lifetimes of 240 Pu and 242 Pu enabled the differentiation between environmental and radiolytic mechanisms. 240 Pu oxalates were observed to decompose to PuOCO 3 at intermediate times (~ 20 weeks) followed by partial conversion to PuO 2 at times greater than one year. Atmospheric oxidation was shown to be the primary decomposition mechanism for 242 Pu(IV) oxalate, and the alpha radiolysis of aquo and oxalate ligands serves as a secondary decomposition mechanism. In conclusion, this study offers a fresh perspective on radiolytic aging, which is crucial for long-term storage applications.

Analytical Techniques in Art Conservation↗

Coarsening of AA6013-T6 Precipitates During Sheet Warm Forming Applications

The use of warm forming for AA6xxx-T6 sheet is of interest to improve its formability; however, the effect warm forming may have on the coarsening of precipitates and the mechanical strength of these sheets has not been well studied. In this research, the coarsening behavior of AA6013-T6 precipitates has been explored, in the temperature range of 200-300 °C, and time of 30 s up to 50 h. Additionally, the effect of warm deformation on coarsening behavior was explored using: (1) simulated warm forming tests in a Gleeble thermo-mechanical simulator and (2) bi-axial warm deformation tests. Using a strong obstacle model to describe the yield strength (YS) evolution of the AA6013-T6 material, and a Lifshitz, Slyozov, and Wagner (LSW) particle coarsening law to describe the change in precipitate size with time, the coarsening kinetics were modeled for this alloy. The coarsening kinetics in the range of 220-300 °C followed a trend similar to that previously found for AA6111 for the 180-220 °C range. There was strong evidence that coarsening kinetics were not altered due to warm deformation above 220 °C. For warm forming between 200 and 220 °C, the YS of the AA6013-T6 material increased slightly, which could be attributed to strain hardening during warm deformation. Finally, a non-isothermal coarsening model was used to assess the potential reduction in the YS of AA6013-T6 for practical processing conditions related to auto-body manufacturing. The model calculations showed that 90% of the original AA6013-T6 YS could be maintained, for warm forming temperatures up to 280 °C, if the heating schedule used to get the part to the warm forming temperature was limited to 1 min.

36 MATERIALS SCIENCE↗

Suggestion of an Indicator to Evaluate Material Deposition in Resistance Spot Welding: Weld–Surface Interaction Index

Resistance spot welding (RSW) is still leading joining process in the automotive industry due to the simplicity and speed of the process. On the other hand, galvanized steel sheets provide improvement in corrosion resistance of the auto body. Material deposition has an influence on the corrosion resistance and weld strength; however, in the literature very little effort has been made to identify any weld–surface interaction numerically. In this study, a numerical approach called “Weld–Surface Interaction Index” (I{sub WSI}) has been introduced to investigate the effect of material deposition on the corrosion sensitivity of the welding zone and its periphery. A systematic investigation was carried out to better understand the effects of an electrode cap–galvanized steel sheet interface on the corrosion resistance of spot-welded steel. The chemical composition of DP600 steel sheet and Z-Trode electrode cap was analyzed by using a spectrometer. The specimens were then joined by using same caps up to 1200 welds. SEM–EDS analysis was also performed on the chosen specimens to determine the weight percentages (wt.%) of Fe, Zn and Cu. EDS analysis results and coefficient of variation wt.% of Fe, Zn and Cu were used to compose I{sub WSI} formula. In the proposed formula, wt.% of Zn represented resistivity of the cover to corrosion, while wt.% of Fe represents the vulnerability.

36 MATERIALS SCIENCE↗

Magnetic Behavior of Ni/NiO Core–Shell Nanoparticles under Electromagnetic Waves for Oil–Water Interfacial Tension Reduction

The increasing demand for oil and gas has led to a hope of developing more efficient recovery methods. It is well known that nanoparticles adsorbed at the oil–water interface, but there is no consensus that has been reached on whether magnetic nanoparticles under electromagnetic waves affect the interfacial tension. In this paper, nickel/nickel oxide nanoparticles have been synthesized using sol–gel auto combustion method. The product was characterized using x-ray diffraction, Raman spectroscopy, field emission scanning electron microscopy, Fourier transforms infrared spectroscopy and vibrating sample magnetometer. The results show the Ni/NiO phases and the ferromagnetic nature of the sample. The Ni/NiO nanofluids were prepared to investigate the effect on oil–water interfacial tension in enhanced oil recovery under electromagnetic waves using an inverted pendant drop method. The results show a significant decrease in interfacial tension under electromagnetic waves of frequency 2.2 kHz at low wt.% of Ni/NiO and at room temperature. The decrease in the interfacial tension has been observed by increasing the temperature to 90 °C using temperature controller. The decrease in the interfacial tension could be due to the interaction of oscillating B-field of waves and magnetic domains of adsorbing nanoparticles at the oil–water interface which disturbed the oil–water interface.

36 MATERIALS SCIENCE↗

Current and Future Uses of Aluminum in the Automotive Industry

Aluminum use is growing in automotive closures and body in white applications to improve vehicle performance and fuel economy. The auto industry is looking for higher strength aluminum materials needed for strength driven safety critical parts. Through cooperation with industrial partners and support from the Department of Energy (DOE), multiple experimental 7xxx alloys were developed for automotive applications. The objective is to enable complex shapes to be formed at temperatures below 225° C. A demonstration part has been developed that is representative of the forming challenges within a current hot stamped door ring component. This part tooling has been built and installed into a press line which includes blank heating and robotic transfer. Forming trials of these alloys are currently underway and the formability, strength and corrosion performance of these materials are being evaluated.

36 MATERIALS SCIENCE↗

Probing the Dynamic Mechanism of Uncommon Allosteric Inhibitors Optimized to Enhance Drug Selectivity of SHP2 with Therapeutic Potential for Cancer Treatment

There is currently considerable interest in SHP2 as a potential target for treatment of cancer. Mutation in SHP2, particularly the E76A mutation, has been found to seriously confer the phosphatase high activity. Recently, two compounds, 1 and 23, have been reported as potent allosteric inhibitors of both SHP2 wild type (SHP2{sup WT}) and the E76A mutant (SHP2{sup E76A}), with higher activity than other inhibitors. However, the structural and dynamic implications of their inhibitory mechanisms are yet unexplored which deserve further attention. Herein, the MD simulation applies to gain insight into the atomistic nature of each binding mode of inhibitors 1 and 23 in both SHP2{sup WT} and SHP2{sup E76A}. The comparative analysis reveals inhibitor 1 can freeze SHP2{sup WT} and SHP2{sup E76A} in their auto-inhibited conformation better than 23, in agreement with experimental data. GLU250 in both SHP2{sup WT} and SHP2{sup E76A} and ARG111 and ARG229 in SHP2{sup E76A} play a crucial role in the higher activity of 1 compared to 23. The mutation E76A increases the binding affinity of 1 and 23 compared to the wild type, implying that the two inhibitors have been well adopted by the E76A mutant. The findings here can substantially shed light on new strategies for developing novel classes of SHP2 inhibitors with increased potency.

60 APPLIED LIFE SCIENCES↗

A feedback regulation of CREB activation through the CUL4A and ERK signaling

CUL4A; an E3 ubiquitin ligase is involved in the degradation of negative regulators of cell cycle such as p21, p27, p53, etc., through polyubiquitination-mediated protein degradation. The functional role(s) of CUL4A proteins on their targets are well characterized; however, the transcriptional regulation of CUL4A, particularly at its promoter level is not yet studied. Therefore, in this study, using computational tools, we found cAMP responsive elements (CRE) at the locations of − 926 and − 764 with respect to transcription state site + 1 of CUL4A promoter. Hence, we investigated the role of CREB on the regulation of CUL4A transcription. Our chromatin immunoprecipitation (ChIP) data clearly showed increased levels of promoter occupancy of both CREB and pCREB on both CREs of CUL4A promoter. As expected, the expression of CUL4A increases and decreases upon the overexpression of and knocking down of CREB, respectively. Moreover, the inhibition of ERK pathway by U0126 not only reduces the CREB activation but also the CUL4A levels suggesting that CREB is the upstream activator of CUL4A transcription. The reduction of CUL4A levels upon the knocking down of CREB or by U0126 treatment increases the protein levels of CUL4A substrates such as p21 and p27. It is reported that CUL4A activates the ERK1/2 transcription and ERK1/2 pathway activates the CREB by phosphorylation. Based on our data and earlier findings, we report that CREB regulates the CUL4A levels positively which in turn activates the CREB through ERK1/2 pathway in the form of auto-regulatory looped mechanism.This suggests that CUL4A might be involved in proliferation of cancer cells by regulating the ERK1/2 and CREB signaling.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Markovian transport processes in a heterogeneous, variably saturated watershed: A multi-domain spatial Markov model

Transport processes in watersheds remain challenging to describe accurately with upscaled models because of their intricate complexities at multiple scales that can lead to multi-modal, non-Fickian breakthrough curves. One of the recent advances in solute transport modeling has been the Lagrangian spatial Markov model (SMM), which describes transport using velocity increments and models the correlated transitions between them. The method has been applied previously to saturated porous media and fractured media, but these successful applications suggest it may be useful for describing watershed scale processes as well. An existing, 3-D, heterogeneous variably saturated model of a headwaters catchment and classical random walk particle tracking were used to generate a forward simulation and the resulting transport was analyzed with a spatial Markov framework. Existing SMM methods were used to analyze the transport paths through the complex, unconfined domain and we found that the vadose zone plays an important role in the correlation structure. As such, a new kind of SMM is proposed, termed a multi-domain SMM (MD-SMM), that uses separate correlation models for auto-transitions in the vadose zone and the saturated zone, and for the cross-transitions between them. The MD-SMM improves representation of transport relative to the single domain model and can naturally delineate times when a particle is in the vadose zone or the saturated zone, adding an additional degree of realism to the upscaled model. Lastly, we show that the transition probability matrix for transport in the saturated portion of this unconfined system is approximately Markovian, which is an important validation of the proposed framework.

54 ENVIRONMENTAL SCIENCES↗