SEARCH · Search NASA

Results for “Accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2016

SU-F-I-13: Correction Factor Computations for the NIST Ritz Free Air Chamber for Medium-Energy X Rays

Purpose: The National Institute of Standards and Technology (NIST) uses 3 free-air chambers to establish primary standards for radiation dosimetry at x-ray energies. For medium-energy × rays, the Ritz free-air chamber is the main measurement device. In order to convert the charge or current collected by the chamber to the radiation quantities air kerma or air kerma rate, a number of correction factors specific to the chamber must be applied. Methods: We used the Monte Carlo codes EGSnrc and PENELOPE. Results: Among these correction factors are the diaphragm correction (which accounts for interactions of photons from the x-ray source in the beam-defining diaphragm of the chamber), the scatter correction (which accounts for the effects of photons scattered out of the primary beam), the electron-loss correction (which accounts for electrons that only partially expend their energy in the collection region), the fluorescence correction (which accounts for ionization due to reabsorption ffluorescence photons and the bremsstrahlung correction (which accounts for the reabsorption of bremsstrahlung photons). We have computed monoenergetic corrections for the NIST Ritz chamber for the 1 cm, 3 cm and 7 cm collection plates. Conclusion: We find good agreement with other’s results for the 7 cm plate. The data used to obtain these correction factors will be used to establish air kerma and it’s uncertainty in the standard NIST x-ray beams.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2016

SU-F-T-492: The Impact of Water Temperature On Absolute Dose Calibration

Purpose: The Task Group 51 (TG 51) protocol prescribes that dose calibration of photon beams be done by irradiating an ionization chamber in a water tank at pre-defined depths. Methodologies are provided to account for variations in measurement conditions by applying correction factors. However, the protocol does not completely account for the impact of water temperature. It is well established that water temperature will influence the density of air in the ion chamber collecting volume. Water temperature, however, will also influence the size of the collecting volume via thermal expansion of the cavity wall and the density of the water in the tank. In this work the overall effect of water temperature on absolute dosimetry has been investigated. Methods: Dose measurements were made using a Farmer-type ion chamber for 6 and 23 MV photon beams with water temperatures ranging from 10 to 40°C. A reference ion chamber was used to account for fluctuations in beam output between successive measurements. Results: For the same beam output, the dose determined using TG 51 was dependent on the temperature of the water in the tank. A linear regression of the data suggests that the dependence is statistically significant with p-values of the slope equal to 0.003 and 0.01 for 6 and 23 MV beams, respectively. For a 10 degree increase in water phantom temperature, the absolute dose determined with TG 51 increased by 0.27% and 0.31% for 6 and 23 MV beams, respectively. Conclusion: There is a measurable effect of water temperature on absolute dose calibration. To account for this effect, a reference temperature can be defined and a correction factor applied to account for deviations from this reference temperature during beam calibration. Such a factor is expected to be of similar magnitude to most of the existing TG 51 correction factors.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2015

Cyber Contingency Analysis version 1.x

Contingency analysis based approach for quantifying and examining the resiliency of a cyber system in respect to confidentiality, integrity and availability. A graph representing an organization's cyber system and related resources is used for the availability contingency analysis. The mission critical paths associated with an organization are used to determine the consequences of a potential contingency. A node (or combination of nodes) are removed from the graph to analyze a particular contingency. The value of all mission critical paths that are disrupted by that contingency are used to quantify its severity. A total severity score can be calculated based on the complete list of all these contingencies. A simple n1 analysis can be done in which only one node is removed at a time for the analysis. We can also compute nk analysis, where k is the number of nodes to simultaneously remove for analysis. A contingency risk score can also be computed, which takes the probability of the contingencies into account. In addition to availability, we can also quantify confidentiality and integrity scores for the system. These treat user accounts as potential contingencies. The amount (and type) of files that an account can read to is used to compute the confidentiality score. The amount (and type) of files that an account can write to is used to compute the integrity score. As with availability analysis, we can use this information to compute total severity scores in regards to confidentiality and integrity. We can also take probability into account to compute associated risk scores.

Mackey, PatrickS.↗

DOE OSTI2021

Embodied carbon in the U.S. manufacturing and trade

On average, one quarter of the global carbon footprint is embodied in traded goods. These emissions are a growing issue for global efforts to decarbonize the world economy. Embodied emissions in trade are not accounted for by existing greenhouse gas accounting systems. For example, countries only report their domestic carbon emissions (also known as production-based or territorial accounting) to the Intergovernmental Panel on Climate Change (IPCC). If the embodied carbon in trade were accounted for and reported, the promising climate trends depicted by many countries would be negated or reversed. For example, many achievements of reducing emissions by developed countries under the Kyoto Protocol would actually appear as emissions outsourced to developing countries. Like many other developed countries, the United States is a net importer of embodied greenhouse gas (GHG) emissions in trade. The goal of this study was to calculate the carbon footprint of various sectors of the U.S. economy using the latest available data and based on that, estimate the embodied carbon in certain manufacturing sector products imported and exported by the U.S. First, we conducted an input-output analysis to calculate the carbon footprint of 401 aggregate level sectors of the U.S. economy. After that, for a selected number of manufacturing subsectors /products(hereafter referred to as products),we collected their trade(import/export) data and combined that with their computed carbon footprint to estimate the embodied carbon in import and export of these products for the U.S. While we conducted the carbon footprint analysis for sectors covering the entire U.S. economy (401 sectors), we only conducted the embodied carbon in trade analysis for a few products within specific aggregate level manufacturing sectors,such as computer and electronic product manufacturing (NAICS 334), transport equipment manufacturing (NAICS 336), machinery manufacturing (NAICS 333), and chemical manufacturing (NAICS 325). It is possible to do the detailed embodied carbon analysis for all other products within the various aggregate level manufacturing sectors of the U.S. economy, but given the scope of this study and space constraint of this report, we only present the results for a few products. The results of our analysis for the selected products show the embodied carbon in trade for each product by country and also show the rankings of countries in terms of top importers and exporters of embodied carbon in trade with the U.S. Our results show that in majority of cases, the U.S. is a net importer of embodied carbon in trade. Unless consumption-based accounting is used, the U.S. and other net embodied carbon importing countries may continue to outsource their emissions to meet their climate change mitigation targets under the Paris Agreement, as observed previously with the Kyoto Protocol. Some countries reported reductions that exceeded their Kyoto targets, however, the changes in emissions embodied in imports were comparable to or larger than changes in domestic emissions. Traded emissions undermined emissions reductions in the Kyoto Protocol, and threaten to continue to do so for the Paris Agreement. New climate policies such as California’s Buy Clean act, EU’s proposed border carbon tax adjustment, as well as efforts in the private sector can help address the embodied carbon in traded products.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2011

CO 2 Injection and Recycle (SECARB Phase III Work Product 7.1.b)

During Cranfield Phase II and Phase III, over an elapsed period of more than three years between July 14, 2008, and August 31, 2011, 3,100,340 metric tons of CO 2 were injected and have accumulated (are stored) in the lower Tuscaloosa Formation as a result of injection. Exceeding the planned 1 million ton/year rate for 1½ year was possible because the project is piggy-backed on a commercial EOR project. The stored volume at elevated pressure has allowed the SECARB team to test a variety of monitoring approaches; these are documented in other SECARB reports and publications. The reported mass stored has been corrected so that it does not include methane impurities or double-count CO 2 produced and recycled. The methods of correction and other accounting strategies are reviewed and described based on the data typically available in a commercial EOR project. As a relevant test case, the SECARB accounting protocol has separated the injected, produced and stored volume into the east and west compartments of the field; the techniques demonstrated can be used in many other ways. Evaluation of the distribution of the CO 2 within the field (for example water leg vs. in the oilfield or gas cap or free-phase CO 2 vs. CO 2 dissolved in brine and oil) will be completed via history matching models with monitoring data in future reports. Assessment of conformance data has not identified any out-of zone CO 2 leakage; this evidence will be discussed in other reports. Assessment of surface release to atmosphere from surface infrastructure was outside of the scope of this study; we assume in this accounting that it is negligible, and less than other sources of accounting error. This milestone report also completes the request for an explanation of accounting during recycle.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Characterization of MC&A for the Molten Salt Fuel Cycle

Advanced reactor developers are exploring diverse reactor designs, including molten salt reactors (MSRs). These advanced reactors are considered for wider applications and a range of deployment locations, including supporting the integration of renewable energy sources in the grid. There are three main types of MSRs: (1) reactors in which the fuel salt freely circulates within the core; (2) reactors with the fuel salt contained within vented fuel tubes; and (3) reactors that use molten salt solely as a coolant, with the fuel in a separate, solid form. In this document, the term MSR refers specifically to the first two types, which use fuel salt—special nuclear material (enriched uranium, plutonium, and 233 U) in chloride or fluoride form mixed with chloride- or fluoride-based carrier salt in a peritectic mixture—as the primary medium for fission. The composition of fuel salt, both at startup and for makeup or refueling, varies depending on the MSR design and the chosen fuel cycle approach, which can be either once-through or closed. For MSRs, a variety of fuel cycle approaches (e.g., U, U–Pu, U–Pu–TRU, U–Th, U–Pu–Th) are being considered. Fuel in MSRs is much different than traditional solid fuel, including its preparation. The uniqueness warrants investigation into characterizing fuel preparation processes, known as fuel salt synthesis . This effort characterized major fuel preparation and synthesis processes, identifying temperature, equipment, and environmental requirements for uranium-, plutonium-, and thorium-based fuel preparation and synthesis. Because MSR fuel salt synthesis facilities handle special nuclear material in loose, bulk form, a material control and accounting plan will be required for licensing from the US Nuclear Regulatory Commission or under the US Department of Energy authorization. This effort serves as a foundation to investigate material control and accounting approaches for synthesis facilities, including determining measurement points and techniques. Because several MSR developers are planning demonstration facilities in the coming years, this effort will support stakeholders with preparing or reviewing material control and accounting plans for providing assurance that all special nuclear material is accounted for at fuel salt synthesis facilities. This report was produced for Materials Protection, Accounting, and Control Technologies (MPACT) program under the US Department of Energy (DOE), Office of Nuclear Energy, Nuclear Fuel Cycle and Supply Chain.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

An Assessment of the Safeguards Implications of Particle and Alloy Formation in MSRs

Molten salt reactors (MSRs) present unique challenges for applying safeguards measures and differ significantly from traditional nuclear reactors. Although the special fissionable materials within MSRs principally exist as dissolved species within the fuel salt, key actinides of interest may also be converted to solid phases including alloys and precipitated oxides via chemical and electrochemical reactions. These solid-phase components will complicate the nuclear material accounting and control (NMAC) approaches that have, so far, primarily targeted measurements of the liquid salt itself. For example, most of the proposed monitoring and characterization methods for MSRs are reliant on homogeneity of the salt and the ability to maintain accountable materials in solution. Solid deposits and particulates could invalidate the assumption of homogeneity and necessitate the use of new models and measurement tools to permit a full accounting of all nuclear material in an MSR. To address this, the likelihood of solids formation in MSRs, estimated the rate at which these solids could form, and assessed the monitoring tools that are available to account for the presence of these materials were examined. Specifically, three solid forming mechanisms were investigated, including (1) the accumulation of actinides within the MSR’s structural materials due to alloying, (2) the accumulation of actinides within noble metal fission product particulates, and (3) the generation of actinide oxides from interactions with salt impurities. These modeling-informed studies were completed with considerations to both fluoride- and chloride-containing salts. It was determined that, although measurable amounts of special fissionable material were expected to alloy with the structural elements and fission products, the predicted amounts were below levels considered as significant quantities (SQ) by the International Atomic Energy Agency (IAEA). However, it was determined that sufficiently large oxygen concentrations could potentially lead to significant quantities of special fissionable material being converted to solid oxide phases. As such, a comparative study of technologies that are commercially available to assist in monitoring and accountancy of this material was presented. Policy implications, design recommendations, and suggestions for follow-on experimental work were also presented to further assist reactor vendors in designing and controlling the fuel salt chemistry to address potential safeguards considerations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2017

Estimating Aboveground Biomass in Tropical Forests: Field Methods and Error Analysis for the Calibration of Remote Sensing Observations

Mapping and monitoring of forest carbon stocks across large areas in the tropics will necessarily rely on remote sensing approaches, which in turn depend on field estimates of biomass for calibration and validation purposes. Here, we used field plot data collected in a tropical moist forest in the central Amazon to gain a better understanding of the uncertainty associated with plot-level biomass estimates obtained specifically for the calibration of remote sensing measurements. In addition to accounting for sources of error that would be normally expected in conventional biomass estimates (e.g., measurement and allometric errors), we examined two sources of uncertainty that are specific to the calibration process and should be taken into account in most remote sensing studies: the error resulting from spatial disagreement between field and remote sensing measurements (i.e., co-location error), and the error introduced when accounting for temporal differences in data acquisition. We found that the overall uncertainty in the field biomass was typically 25% for both secondary and primary forests, but ranged from 16 to 53%. Co-location and temporal errors accounted for a large fraction of the total variance (>65%) and were identified as important targets for reducing uncertainty in studies relating tropical forest biomass to remotely sensed data. Although measurement and allometric errors were relatively unimportant when considered alone, combined they accounted for roughly 30% of the total variance on average and should not be ignored. Lastly, our results suggest that a thorough understanding of the sources of error associated with field-measured plot-level biomass estimates in tropical forests is critical to determine confidence in remote sensing estimates of carbon stocks and fluxes, and to develop strategies for reducing the overall uncertainty of remote sensing approaches.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Representing surface heterogeneity in land–atmosphere coupling in E3SMv1 single-column model over ARM SGP during summertime

Abstract. The Earth's land surface features spatial and temporal heterogeneity over a wide range of scales below those resolved by current Earth system models (ESMs). State-of-the-art land and atmosphere models employ parameterizations to represent their subgrid heterogeneity, but the land–atmosphere coupling in ESMs typically operates on the grid scale. Communicating the information on the land surface heterogeneity with the overlying atmospheric boundary layer (ABL) remains a challenge in modeling land–atmosphere interactions. In order to account for the subgrid-scale heterogeneity in land–atmosphere coupling, we implement a new coupling scheme in the Energy Exascale Earth system model version 1 (E3SMv1) that uses adjusted surface variances and covariance of potential temperature and specific water content as the lower boundary condition for the atmosphere model. The new lower boundary condition accounts for both the variability of individual subgrid land surface patches and the inter-patch variability. The E3SMv1 single-column model (SCM) simulations over the Atmospheric Radiation Measurement (ARM) Southern Great Plain (SGP) site were performed to assess the impacts. We find that the new coupling parameterization increases the magnitude and diurnal cycle of the temperature variance and humidity variance in the lower ABL on non-precipitating days. The impacts are primarily attributed to subgrid inter-patch variability rather than the variability of individual patches. These effects extend vertically from the surface to several levels in the lower ABL on clear days. We also find that accounting for surface heterogeneity increases low cloud cover and liquid water path (LWP). These cloud changes are associated with the change in cloud regime indicated by the skewness of the probability density function (PDF) of the subgrid vertical velocity. In precipitating days, the inter-patch variability reduces significantly so that the impact of accounting for surface heterogeneity vanishes. These results highlight the importance of accounting for subgrid heterogeneity in land–atmosphere coupling in next-generation ESMs.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1995

A microeconomic scheduler for parallel computers

We describe a scheduler based on the microeconomic paradigm for scheduling on-line a set of parallel jobs in a multiprocessor system. In addition to the classical objectives of increasing the system throughput and reducing the response time, we consider fairness in allocating system resources among the users, and providing the user with control over the relative performances of his jobs. We associate with every user a savings account in which he receives money at a constant rate. When a user wants to run a job, he creates an expense account for that job to which he transfers money from his savings account. The job uses the funds in its expense account to obtain the system resources it needs for execution. The share of the system resources allocated to the user is directly related to the rate at which the user receives money; the rate at which the user transfers money into a job expense account controls the job's performance. We prove that starvation is not possible in our model. Simulation results show that our scheduler improves both system and user performances in comparison with two different variable partitioning policies. It is also shown to be effective in guaranteeing fairness and providing control over the performance of jobs.

Stoica, Ion↗

NASA NTRS1999

Fidelity Analysis of Sampled Imaging Systems

Many modeling, simulation and performance analysis studies of sampled imaging systems are inherently incomplete because they are conditioned on a discrete-input, discrete-output model that only accounts for blurring during image acquisition and additive noise. For those sampled imaging systems where the effects of digital image acquisition, digital filtering and reconstruction are significant, the modeling, simulation and performance analysis should be based on a more comprehensive continuous-input, discrete-processing, continuous-output end-to-end model. This more comprehensive model should properly account for the low-pass filtering effects of image acquisition prior to sampling, the potentially important noiselike effects of the aliasing caused by sampling, additive noise due to device electronics and quantization, the generally high-boost filtering effects of digital processing, and the low-pass filtering effects of image reconstruction. This model should not, however, be so complex as to preclude significant mathematical analysis, particularly the mean-square (fidelity) type of analysis so common in linear system theory. We demonstrate that, although the mathematics of such a model is more complex, the increase in complexity is not so great as to prevent a complete fidelity-metric analysis at both the component level and at the end-to-end system level: that is, computable mean-square-based fidelity metrics are developed by which both component-level and system-level performance can be quantified. In addition, we demonstrate that system performance can be assessed qualitatively by visualizing the output image as the sum of three component images, each of which relates to a corresponding fidelity metric. The cascaded, or filtered, component accounts for the end-to-end system filtering of image acquisition, digital processing, and image reconstruction; the random noise component accounts for additive random noise, modulated by digital processing and image reconstruction filtering; and the aliased noise component accounts for the frequency folding effect of sampling, modulated by digital processing and image reconstruction filtering.

Park, Stephen K.↗

NASA NTRS1990

Toward applied behavior analysis of life aloft

This article deals with systems at multiple levels, at least from cell to organization. It also deals with learning, decision making, and other behavior at multiple levels. Technological development of a human behavioral ecosystem appropriate to space environments requires an analytic and synthetic orientation, explicitly experimental in nature, dictated by scientific and pragmatic considerations, and closely approximating procedures of established effectiveness in other areas of natural science. The conceptual basis of such an approach has its roots in environmentalism which has two main features: (1) knowledge comes from experience rather than from innate ideas, divine revelation, or other obscure sources; and (2) action is governed by consequences rather than by instinct, reason, will, beliefs, attitudes or even the currently fashionable cognitions. Without an experimentally derived data base founded upon such a functional analysis of human behavior, the overgenerality of "ecological systems" approaches render them incapable of ensuring the successful establishment of enduring space habitats. Without an experimentally derived function account of individual behavioral variability, a natural science of behavior cannot exist. And without a natural science of behavior, the social sciences will necessarily remain in their current status as disciplines of less than optimal precision or utility. Such a functional analysis of human performance should provide an operational account of behavior change in a manner similar to the way in which Darwin's approach to natural selection accounted for the evolution of phylogenetic lines (i.e., in descriptive, nonteleological terms). Similarly, as Darwin's account has subsequently been shown to be consonant with information obtained at the cellular level, so too should behavior principles ultimately prove to be in accord with an account of ontogenetic adaptation at a biochemical level. It would thus seem obvious that the most productive conceptual and methodological approaches to long-term research investments focused upon human behavior in space environments will require multidisciplinary inputs from such wide-ranging fields as molecular biology, environmental physiology, behavioral biology, architecture, sociology, and political science, among others.

Review↗

NASA NTRS2012

Global Scale Attribution of Anthropogenic and Natural Dust Sources and their Emission Rates Based on MODIS Deep Blue Aerosol Products

Our understanding of the global dust cycle is limited by a dearth of information about dust sources, especially small-scale features which could account for a large fraction of global emissions. Here we present a global-scale high-resolution (0.1 deg) mapping of sources based on Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue estimates of dust optical depth in conjunction with other data sets including land use. We ascribe dust sources to natural and anthropogenic (primarily agricultural) origins, calculate their respective contributions to emissions, and extensively compare these products against literature. Natural dust sources globally account for 75% of emissions; anthropogenic sources account for 25%. North Africa accounts for 55% of global dust emissions with only 8% being anthropogenic, mostly from the Sahel. Elsewhere, anthropogenic dust emissions can be much higher (75% in Australia). Hydrologic dust sources (e.g., ephemeral water bodies) account for 31% worldwide; 15% of them are natural while 85% are anthropogenic. Globally, 20% of emissions are from vegetated surfaces, primarily desert shrublands and agricultural lands. Since anthropogenic dust sources are associated with land use and ephemeral water bodies, both in turn linked to the hydrological cycle, their emissions are affected by climate variability. Such changes in dust emissions can impact climate, air quality, and human health. Improved dust emission estimates will require a better mapping of threshold wind velocities, vegetation dynamics, and surface conditions (soil moisture and land use) especially in the sensitive regions identified here, as well as improved ability to address small-scale convective processes producing dust via cold pool (haboob) events frequent in monsoon regimes.

aerosols↗

NASA NTRS2016

Electromagnetic Dissociation Cross Sections for High LET Fragments

Nuclear interaction cross sections are used in space radiation transport codes to calculate the probability of fragment emission in high energy nucleus-nucleus collisions. Strong interactions usually dominate in these collisions, but electromagnetic (EM) interactions can also sometimes be important. Strong interactions typically occur when the projectile nucleus hits a target nucleus, with a small impact parameter. For impact parameters larger than the sum of the nuclear radii, EM reactions dominate and the process is called electromagnetic dissociation (EMD) if one of the nuclei undergo fragmentation. Previous models of EMD have been used to calculate single proton (p) production, single neutron (n) production or light ion production, where a light ion is defined as an isotope of hydrogen (H) or helium (He), such as a deuteron (2H), a triton (3H), a helion (3He) or an alpha particle (4He). A new model is described which can also account for multiple nucleon production, such as 2p, 2n, 1p1n, 2p1n, 2p2n, etc. in addition to light ion production. Such processes are important to include for the following reasons. Consider, for example, the EMD reaction 56Fe + Al --> 52Cr + X + Al, for a 56Fe projectile impacting Al, which produces the high linear energy transfer (LET) fragment 52Cr. In this reaction, the most probable particles representing X are either 2p2n or 4He. Therefore, production of the high LET fragment 52Cr, must include the multiple nucleon production of 2p2n in addition to the light ion production of 4He. Previous models, such as the NUCFRG3 model, could only account for the 4He production process in this reaction and could not account for 2p2n. The new EMD model presented in this work accounts for both the light ion and multiple nucleon processes, and is therefore able to correctly account for the production of high LET products such as 52Cr. The model will be described and calculations will be presented that show the importance of light ion and multiple nucleon production. The work will also show that EMD reactions contribute most to those fragments with the highest LET.

Norbury, John↗

NASA NTRS2021

Modeling the Effects of a Backward-Facing Step on Boundary-Layer Transition

We model transition to turbulence in a two-dimensional boundary layer downstream of a backward-facing step (BFS) along a flat plate. With the goal of evaluating the available engineering models for predicting the effects of step excrescences on the transition characteristics, two separate methodologies are used to monitor the streamwise shift in the transition onset location as the step height and the flow speed are varied across the range of a previously reported experiment involving step-height-to-local-displacement-thickness ratios of 0 < h/δ* < 1.6. Unlike the variable N -factor method from the previous literature, both of these methods are general in scope and do not involve any empirical correlations that are specific to step excrescences. The first of these techniques involves an N -factor method that directly accounts for the change in boundary-layer instability characteristics due to the step. Stability computations using the harmonic linearized Navier-Stokes equations (HLNSE), which fully account for the nonparallel-mean-flow effects close to the BFS, indicate that the measured transition locations at nearly all test conditions ( h/δ* < 1.3) correlate well with a computed N -factor of N tr = 7.6, demonstrating a successful stability-based transition criterion related to step excrescences. Linear stability theory, which does not account for nonparallel effects, demonstrates reasonable agreement with the HLNSE results, yielding good predictions for the overall trends, but predicts a somewhat earlier onset of transition than HLNSE. The other methodology used in this work involves transport-equation-based transition models. We first show that the Langtry-Menter y - Re θt transition model cannot accurately predict the location of transition onset for moderate BFS heights because it is unable to accurately account for the flow history effects. Along with the Langtry-Menter transition model, we also show the amplification factor transport model does not produce accurate transition locations for subsonic flow over steps even though it accounts for some flow history effects.

Transition↗

NASA NTRS2021

Modeling the Effects of a Backward-Facing Step on Boundary-Layer Transition

Transition↗

DOE OSTI2019

I Asked 30,000 People in the Nuclear Industry About Safety Culture; This is What I Learned - 19204

Organizations in the nuclear industry place a high value on maintaining the safety of the workforce and community. Some of these organizations do a better job than others when it comes to developing and sustaining a healthy safety culture. We spent six years studying nuclear organizations to better understand the factors that influence safety culture. We used mixed methods to evaluate perceptions of safety culture in these organizations including administering a valid and reliable safety culture survey, conducting one-on-one interviews with managers, and facilitating focus groups with members of the workforce. We analyzed the quantitative and qualitative data collected from more than 30,000 workers in U.S. based organizations. All of the organizations had a nuclear component to their operations. They operated nuclear reactors, processed nuclear materials, decontaminated and decommissioned buildings with radiological contamination, cleaned-up hazardous/mixed waste, and conducted basic science research and development. We talked to craft workers, technicians, engineers, scientific professionals, support personnel, production workers, supervisors and managers. We conducted extensive statistical analysis and learned that, with rare exception, there is a gap between the perceptions of managers and the workforce that they manage. Managers almost always have a more positive perception of safety culture than the people that are actually performing the work. It is not a question of whether there will be a gap; it is simply a matter of the magnitude of the gap. We also learned through exploratory factor analysis that there is one dominant factor that accounted for almost all (75%) of the variance in the perceptions of safety culture. It was the behavior of the leaders, the decisions they made, and the systems they implemented that most influenced the workforce's perception of safety culture. Personal accountability for safety accounted for 14% of the variance, communication and reporting accounted for another 6%. Everything else accounted for the remaining 5%. Management systems, decision making and behavior is the dominant factor and managers almost always have a more positive perception than the people that work for them. People that work in organizations where management exhibits positive decision-making and safety-related behaviors tend to have more positive perceptions of safety culture. Based upon these results, we developed a theory that there were a few important factors on which management could focus on if they sought to influence the safety culture in their organization. Our experience and research suggests that management often fails to recognize five root causes of employee discontent. Employees seek: - To be recognized as an individual; - To be respected; - A sense of stability; - Fairness; - To make a difference. Understanding the perceptions of the workforce is critical because perceptions influence attitudes, which contribute to behaviors that determine individual performance. An organisation's performance is simply the sum of the performance of all of the members of that organization. To change an organisation's safety culture, interventions should target management behavior and decision making for the greatest return on investment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS2018

Agency Agreements Process Champion Support Intern

This document will provide information on the 2018 Spring semester NIFS Intern who represented the Office of Chief Financial Officer (OCFO) as a Reimbursable Accountant at Kennedy Space Center (KSC). This intern supported the Agency Agreements Process Champions and Team Lead, Susan Kroskey, Sandy Massey and Mecca Murphy, with major initiatives to advance the KSC OCFO's vision of creating and innovating healthy financial management practices that maximize the value of resources entrusted to NASA. These initiatives include, but are not limited to: updating the Agency Guidance and NASA Procedural Guidance 9090.1 Agreements, implementing a new budget structure to be utilized across all centers, submitting a Call Request (CRQ) to enhance non-federal customer reporting, initiating a discussion to incorporate a 3-year funding program for NASA agreements, and undertaking the Office of Inspector General (OIG) Audit. In support of these initiatives, this intern identified technical methods to enhance and reduce the workload of financial processes for reimbursable and non-reimbursable agreements, prepared reports in support of accounting functions, and performed administrative work and miscellaneous technical tasks in support of the OCFO as requested. In conclusion of the internship, the intern will become knowledgeable on reimbursable accounting, reimbursable policy, types of reimbursable agreements, the agreements process, estimated pricing reports, and the roles and responsibilities of the Financial Accounting and Financial Services offices.

Process Champion↗