Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Raman spectroscopic study of cyclopentane at high pressure

The behavior of cyclopentane with pressure has been investigated to 21.5 GPa using Raman spectroscopy. Various phases were observed with pressure which included liquid, two plastic, and one true crystalline phases of cyclopentane during compression and decompression sequences. Optimized molecular structure and Raman and IR vibrational spectra of the most stable puckered-ring conformation of the cyclopentane molecule were also computed using density functional theory methods. The theoretically calculated values as well as the experimentally determined pressure dependencies of spectral bands are in very good agreement with the low temperature measurements and previous mode assignments. The phase diagram of cyclopentane was analyzed with respect to pressure-induced alterations in Raman spectra across the phase boundaries. The various forms of 'frozen-in' conformations in phase III are suggested to explain previous results related to existence of a 'new' phase between plastic crystalline phase II and monoclinic phase III in solid cyclopentane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Magnetic Studies of Nano-crystalline Ferrites MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) Synthesized Via Citrate Gel Autocombustion Method

Nano-crystalline ferrites with the chemical formula MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) were synthesized via autocombustion route with citric acid as fuel. The ratio of citric acid to metal nitrate was taken as 1:1. The synthesized samples were characterized by powder X-ray diffraction and far-IR spectroscopy. The measured lattice constants and observed characteristic IR absorption bands of all samples were in good agreement with the reported values and showed the formation of a cubic spinel structure. The crystallite sizes of all samples were determined using high-intensity peaks and a W-H plot. The crystallite sizes of all samples were observed to be in the range of 16–26 nm with the least crystallite size of 16.8 nm for copper ferrite. All structural parameters were calculated using an experimental lattice constant and an oxygen positional parameter and correlated with far-IR results. Zinc and copper owing to their large cation radii showed the expansion of the lattice in view of the oxygen positional parameter. Magnetic measurements were carried out using a vibrating sample magnetometer at room temperature, and parameters such as saturation magnetization, coercivity, remanence, squareness ratio, and Bohr magnetons were calculated. Among all synthesized nano-ferrites, cobalt nano-ferrite showed the highest saturation magnetization of 41 emu/g, whereas zinc ferrite displayed a low saturation magnetization value of 12.87 emu/g.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compact RBF meshless methods for photonic crystal modelling

Meshless methods based on compact radial basis functions (RBFs) are proposed for modelling photonic crystals (PhCs). When modelling two-dimensional PhCs two generalised eigenvalue problems are formed, one for the transverse-electric (TE) mode and the other for the transverse-magnetic (TM) mode. Conventionally, the Band Diagrams for two-dimensional PhCs are calculated by either the plane wave expansion method (PWEM) or the finite element method (FEM). Here, the eigenvalue equations for the two-dimensional PhCs are solved using RBFs based meshless methods. For the TM mode a meshless local strong form method (RBF collocation) is used, while for the tricker TE mode a meshless local weak form method (RBF Galerkin) is used (so that the discontinuity of the dielectric function {epsilon}(x) can naturally be modelled). The results obtained from the meshless methods are found to be in good agreement with the standard PWEM. Thus, the meshless methods are proved to be a promising scheme for predicting photonic band gaps.

97 MATHEMATICS AND COMPUTING↗

Synthesis, morphology and optical properties of LaFeO{sub 3} nanospheres

LaFeO{sub 3} nanospheres have been successively synthesized via hydrothermal method. Structural, morphological and optical properties of the prepared nanopowder were analyzed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–Vis absorption spectroscopy. The UV–Vis shows strong absorption at 475 nm which has excellent visible light absorption ability. Band gap energy of the prepared nanosphere was found to be 2.60 eV. The results indicate that the LaFeO{sub 3} nanospheres prepared by this method could be a kind of photocatalytic material.

36 MATERIALS SCIENCE↗

The National Ignition Facility modular Kirkpatrick-Baez microscope

Current two-dimensional X-ray imaging at the National Ignition Facility (NIF) uses time resolved pinhole cameras with ∼10-25 μm pinholes. This method has limitations in the smallest resolvable features that can be imaged with reasonable photon statistics for inertial confinement fusion (ICF) applications. ICF sources have a broadband self-emission spectrum that causes the pinhole images obtained, through thin foil filters, to contain a similarly broadband spectrum complicating the interpretation of structure in the source. In order to study phenomena on the scale of ∼5 μm, such as dopant mix in the ICF capsule, a narrow energy band, higher spatial resolution microscope system with improved signal/noise has been developed using X-ray optics. Utilizing grazing incidence mirrors in a Kirkpatrick-Baez microscope (KBM) configuration [P. Kirkpatrick and A. V. Baez, J. Opt. Soc. Am. 38, 766–774 (1948)], an X-ray microscope has been designed and fielded on NIF with four imaging channels. The KBM has ∼12 × magnification, <8 μm resolution, and higher throughput in comparison to similar pinhole systems. The first KBM mirrors are coated with a multilayer mirror to allow a “narrow band” energy response at 10.2 keV with ΔE ∼ 3 keV. By adjusting the mirror coating only, the energy response can be matched to the future experimental requirements. Several mirror packs have been commissioned and are interchangeable in the diagnostic snout.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE TEMPERATURES OF RED SUPERGIANTS

We present a re-appraisal of the temperatures of red supergiants (RSGs) using their optical and near-infrared spectral energy distributions (SEDs). We have obtained data of a sample of RSGs in the Magellanic Clouds using VLT+XSHOOTER, and we fit MARCS model atmospheres to different regions of the spectra, deriving effective temperatures for each star from (1) the TiO bands, (2) line-free continuum regions of the SEDs, and (3) the integrated fluxes. We show that the temperatures derived from fits to the TiO bands are systematically lower than the other two methods by several hundred kelvin. The TiO fits also dramatically overpredict the flux in the near-IR, and imply extinctions which are anomalously low compared to neighboring stars. In contrast, the SED temperatures provide good fits to the fluxes at all wavelengths other than the TiO bands, are in agreement with the temperatures from the flux integration method, and imply extinctions consistent with nearby stars. After considering a number of ways to reconcile this discrepancy, we conclude that three-dimensional effects (i.e., granulation) are the most likely cause, as they affect the temperature structure in the upper layers where the TiO lines form. The continuum, however, which forms at much deeper layers, is apparently more robust to such effects. We therefore conclude that RSG temperatures are much warmer than previously thought. We discuss the implications of this result for stellar evolution and supernova progenitors, and provide relations to determine the bolometric luminosities of RSGs from single-band photometry.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis, characterization and optical properties of hybrid PVA–ZnO nanocomposite: A composition dependent study

Graphical abstract: - Highlights: • ZnO nanoparticles were prepared by solution combustion method. • PVA–ZnO nanocomposites were synthesized by solution casting method. • Doped and undoped films were characterized using different techniques. • Red shift in optical band gap was observed in Nanocomposite films with respect to nano ZnO. • Photoluminescence intensity was found to be optimum for PVA–10 mol% ZnO nanocomposite film. - Abstract: Nanocomposites of poly vinyl alcohol (PVA) and ZnO have been synthesized using the solution casting technique for different concentrations of nano ZnO powder prepared by low temperature solution combustion method. The formation of polymer nanocomposite and changes in the structural and micro structural properties of the materials were investigated by X-ray diffraction, Energy dispersive X ray spectroscopy and optical microscopy techniques (FTIR and UV–Visible). The surface morphology of PVA–ZnO nanocomposite films were elucidated using Scanning Electron Microscopy. The optical absorption spectrum of nano ZnO shows blue shift in the optical band gap energy with respect to characteristic bulk ZnO at room temperature, whereas PVA–ZnO hybrid films show red shift with respect to nano ZnO. The photoluminescence studies show that the intensity of the blue emission (470 nm) varies with change in concentration of ZnO with an optimum intensity observed at 10 mol% of ZnO.

36 MATERIALS SCIENCE↗

Structure and Optical Properties Of LiNbO{sub 3}:В Crystals Grown from Charges of Different Origins

It was shown that, without entering the structure of the crystal, boron can change the structure of the melt and have a significant effect on the fine features of the structure and the physical characteristics of lithium niobate crystals. Crystals grown from a charge doped with boron by the direct solid-phase method have a stronger photorefractive effect and a smaller forbidden band width than crystals grown from the re-extract doped homogeneously with boron at the niobium pentoxide extraction stage.

36 MATERIALS SCIENCE↗

Structural and Optical Study of Copper-Doped Zinc Sulfide Nanoparticles

Copper-doped zinc sulfide nanoparticles have been synthesized using a wet chemical method. The synthesized nanoparticles exhibit a zinc blende structure with the crystallite size of 3.8 nm. The morphological and optical studies of the synthesized nanoparticles have been performed. It is found that the band gap varies from 3.6 to 4.4 eV depending upon the concentration of copper. The room temperature photoluminescence of the synthesized nanoparticles has been also investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing ternary solvent effect in high V oc polymer solar cells using advanced AFM techniques

This work describes a simple method to develop a high V oc low band gap PSCs. In addition, two new atomic force microscopy (AFM)-based nanoscale characterization techniques to study the surface morphology and physical properties of the structured active layer are introduced. With the help of ternary solvent processing of the active layer and C 60 buffer layer, a bulk heterojunction PSC with V oc more than 0.9 V and conversion efficiency 7.5% is developed. In order to understand the fundamental properties of the materials ruling the performance of the PSCs tested, AFM-based nanoscale characterization techniques including Pulsed-Force-Mode AFM (PFM-AFM) and Mode-Synthesizing AFM (MSAFM) are introduced. Interestingly, MSAFM exhibits high sensitivity for direct visualization of the donor–acceptor phases in the active layer of the PSCs. Lastly, conductive-AFM (cAFM) studies reveal local variations in conductivity in the donor and acceptor phases as well as a significant increase in photocurrent in the PTB7:ICBA sample obtained with the ternary solvent processing.

25 ENERGY STORAGE↗

Synthesis and characterization of ZnO thin films

Zinc oxide (ZnO) Thin films were deposited on glass substrate using Spin coating method. Zinc acetate dehydrate, Carbinol and Mono-ethanolamine were used as the precursor, solvent and stabilizer respectively to prepare ZnO Thin-films. The molar ratio of Monoethanolamine to Zinc acetate was maintained as approximately 1. The thickness of the films was determined by Interference technique. The optical properties of the films were studied by UV Vis-Spectrophotometer. From transmittance and absorbance curve, the energy band gap of ZnO is found out. Electrical Conductivity measurements of ZnO are carried out by two probe method and Activation energy for the electrical conductivity of ZnO are found out. The crystal structure and orientation of the films were analyzed by XRD. The XRD patterns show that the ZnO films are polycrystalline with wurtzite hexagonal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric quadrupole transitions of the Bohr Hamiltonian with the Morse potential

Eigenfunctions of the collective Bohr Hamiltonian with the Morse potential have been obtained by using the asymptotic iteration method (AIM) for both {gamma}-unstable and rotational structures. B(E2) transition rates have been calculated and compared to experimental data. Overall good agreement is obtained for transitions within the ground-state band, while some interband transitions appear to be systematically underpredicted in {gamma}-unstable nuclei and overpredicted in rotational nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electronic structure of Zn-substituted germanium clathrates

The result of the calculations of the electronic structure for Ba{sub 8}Zn{sub x}Ge{sub 46-x} (x = 4, 6, 8) clathrates are presented. Band structures, total and partial electron densities of states in clathrates were obtained. The effect of the number of substituted atoms on the electron energy spectrum was considered. The linearized augmented plane wave method was used in the calculations.

36 MATERIALS SCIENCE↗

Determination of the Parameters of Metal–Insulator–Semiconductor Structures with Ultrathin Insulating Layer from High-Frequency Capacitance–Voltage Measurements

A simple numerical method for processing the data of the high-frequency capacitance–voltage characteristics of metal–insulator–semiconductor structures is proposed. The approach is based on analyzing the experimental characteristics near the flat-band states, where the charge exchange of surface localized electron states is of little importance compared with changes in the near-boundary charged layer in the semiconductor. The developed technique makes it possible, first, to find the necessary parameters of the semiconductor and insulating layer and, second, to obtain the experimental field dependences of the energy-band bending in the semiconductor and the total concentration of the built-in charge, the charge of boundary states and minority charge carriers at the semiconductor–insulator interface in the range from the flat bands to deep depletion. The technique is well applicable to structures with an ultra-thin insulating layer. On n-Si-based metal–oxide–semiconductor samples with an oxide thickness of 39 Å, experimental approbation of the proposed approach is carried out. The accuracy of the obtained results is 2–3%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A quantum theoretical study of polyimides

One of the most important contributions of theoretical chemistry is the correct prediction of properties of materials before any costly experimental work begins. This is especially true in the field of electrically conducting polymers. Development of the Valence Effective Hamiltonian (VEH) technique for the calculation of the band structure of polymers was initiated. The necessary VEH potentials were developed for the sulfur and oxygen atoms within the particular molecular environments and the explanation explored for the success of this approximate method in predicting the optical properties of conducting polymers.

Burke, Luke A.↗

Towards developing an analytical procedure of defining the equatorial electrojet for correcting satellite magnetic anomaly data

Analysis of the total magnetic intensity MAGSAT data has identified and characterized the variability of ionospheric current effects as reflected in the geomagnetic field as a function of longitude, elevation, and time (daily as well as monthly variations). This analysis verifies previous observations in POGO data and provides important boundary conditions for theoretical studies of ionospheric currents. Furthermore, the observations have led to a procedure to remove these temporal perturbations from lithospheric MAGSAT magnetic anomaly data based on 'along-the-dip-latitude' averages from dawn and dusk data sets grouped according to longitudes, time (months), and elevation. Using this method, high-resolution lithospheric magnetic anomaly maps have been prepared of the earth over a plus or minus 50 deg latitude band. These maps have proven useful in the study of the structures, nature, and processes of the lithosphere.

Ravat, Dhananjay↗

Understanding the electronic structure of CdSe quantum dot-fullerene (C{sub 60}) hybrid nanostructure for photovoltaic applications

By using the density-functional tight binding method, we studied the electronic structure of CdSe quantum dot(QD)-buckminsterfullerene (C{sub 60}) hybrid systems as a function of both the size of the QD and concentration of the fullerene molecule. Our calculation reveals that the lowest unoccupied molecular orbital energy level of the hybrid CdSeQD-C{sub 60} systems lies on the fullerene moiety, whereas the highest occupied molecular orbital (HOMO) energy level lies either on the QD or the fullerene depending on size of the CdSe QD. We explored the possibility of engineering the energy level alignment by varying the size of the CdSe QD. With increase in size of the QD, the HOMO level is shifted upward and crosses the HOMO level of the C{sub 60}-thiol molecule resulting transition from the type-I to type-II band energy alignment. The density of states and charge density plot support these types of band gap engineering of the CdSe-C{sub 60} hybrid systems. This type II band alignment indicates the possibility of application of this nanohybrid for photovoltaic purpose.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Band Anticrossing in Highly Mismatched Compound Semiconductor Alloys

Compound semiconductor alloys in which metallic anions are partially replaced with more electronegative isoelectronic atoms have recently attracted significant attention. Group IIIN(sub x)V(sub 1-x) alloys with a small amount of the electronegative N substituting more metallic column V elements has been the most extensively studied class of such Highly Mismatched Alloys (HMAs). We have shown that many of the unusual properties of the IIIN(sub x)V(sub 1-x) alloys can be well explained by the Band Anticrossing (BAC) model that describes the electronic structure in terms of an interaction between highly localized levels of substitutional N and the extended states of the host semiconductor matrix. Most recently the BAC model has been also used to explain similar modifications of the electronic band structure observed in Te-rich ZnS(sub x)Te(sub 1-x) and ZnSe(sub y)Te(sub 1-y) alloys. To date studies of HMAs have been limited to materials with relatively small concentrations of highly electronegative atoms. Here we report investigations of the electronic structure of ZnSe(sub y)Te(sub 1-y) alloys in the entire composition range, y between 0 and 1. The samples used in this study are bulk ZnSe(sub y)Te(sub 1-y) crystals grown by either a modified Bridgman method or by physical vapor transport. Photomodulated reflection (PR) spectroscopy was used to measure the composition dependence of optical transitions from the valence band edge and from the spin-orbit split off band to the conduction band. The pressure dependence of the band gap was measured using optical absorption in a diamond anvil cell. We find that the energy of the spin-orbit split off valence band edge does not depend on composition and is located at about 3 eV below the conduction band edge of ZnSe. On the Te-rich side the pressure and the composition dependence of the optical transitions are well explained by the BAC model which describes the downward shift of the conduction band edge in terms of the interaction between localized Se states and the conduction band. On the other hand we show that the large band gap reduction observed on the Se-rich side of the alloy system is a result of an interaction between the localized Te level and the valence bands. This interaction leads to the formation of a Te-like valence band edge that strongly interacts with the light hole valence band. Calculations based on a modified k(sup dot)p model account for the reduction of the band gap and the large increase of the spin-orbit splitting observed in Se-rich ZnSe(sub y)Te(sub 1-y) alloys. We will also discuss the importance of these new results for understanding of the electronic structure and band offsets in other highly mismatched alloy systems.

Yu, Kin Man↗