Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Optimization and characterization of hydrochar produced from microwave hydrothermal carbonization of fish waste

Highlights: • Microwave hydrothermal carbonization (MHTC) converts fish waste to hydrochar. • MHTC of fish waste at ∼200 °C for ∼119 min produces maximal hydrochar yield (∼34%). • Based on MHTC conditions, hydrochar has ∼25–57% atomic carbon, and ∼20–28% ash. • Microsphere-rich hydrochar has energy value that ranges from 19 to 24.5 MJ/kg. • MHTC can convert pure non-lignocellulosic fish waste to good quality hydrochar. - Abstract: Fish processing results in large amounts of solid and liquid wastes that are unsustainably dumped into oceans and landfills. Alternative sustainable technologies that completely utilize seafood wastes are needed. Hydrothermal carbonization (HTC) that converts moisture-rich biomass into hydrochar is mostly employed for pure lignocellulosic biowaste. However, the suitability of HTC for pure non-lignocellulosic waste is unknown. Here, for the first time, a response surface design guided optimization of microwave hydrothermal carbonization (MHTC) process parameters, holding temperature (150–210 °C) and time (90–120 min), showed that a temperature of approximately 200 °C and a time of approximately 119 min yielded maximal hydrochar (∼34%). The atomic carbon and ash content, and calorific value of hydrochar were approximately 25–57%, 20–28%, and 19–24.5 MJ/kg respectively, depending on the MHTC operating conditions. Taken together, these results confirm that MHTC produces hydrochar from fish waste of quality comparable to one produced from certain lignocellulosic, sewage and municipal wastes. Therefore, this strategy presents an exciting alternative technology that can be used either independently or in combination with other valorization techniques to completely utilize fish wastes irrespective of their quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A thioacidolysis method tailored for higher‐throughput quantitative analysis of lignin monomers

Abstract Thioacidolysis is a method used to measure the relative content of lignin monomers bound by β‐O‐4 linkages. Current thioacidolysis methods are low‐throughput as they require tedious steps for reaction product concentration prior to analysis using standard GC methods. A quantitative thioacidolysis method that is accessible with general laboratory equipment and uses a non‐chlorinated organic solvent and is tailored for higher‐throughput analysis is reported. The method utilizes lignin arylglycerol monomer standards for calibration, requires 1–2 mg of biomass per assay and has been quantified using fast‐GC techniques including a Low Thermal Mass Modular Accelerated Column Heater (LTM MACH). Cumbersome steps, including standard purification, sample concentrating and drying have been eliminated to help aid in consecutive day‐to‐day analyses needed to sustain a high sample throughput for large screening experiments without the loss of quantitation accuracy. The method reported in this manuscript has been quantitatively validated against a commonly used thioacidolysis method and across two different research sites with three common biomass varieties to represent hardwoods, softwoods, and grasses.

09 BIOMASS FUELS↗

Characteristics of Hot Water Extracts from the Bark of Cultivated Willow ( Salix sp.)

Willow bark is a rich source of heterogeneous polyphenolic compounds and a potential feedstock for biorefinery processes aiming at chemicals and fiber production. Here, mild hot water treatment of willow hybrid Karin was studied to find a practical means of isolating its non-cell-wall components for their utilization in a willow biorefinery proposed to aid valorization of the willow biomass. A short aqueous treatment of the bark at 80 °C liberated the extract in >20% yield under unpressurized conditions. The extract was characterized using mainly gas chromatography-mass spectrometry and one- and two-dimensional NMR techniques. Authentic analytes were applied to confirm the identification and quantification of the main components that were picein, (+)-catechin, triandrin, glucose, and fructose. Fructose was converted into 5-hydroxymethylfurfural in an acidic treatment which led to its condensation with the phenolic components and formation of a recalcitrant precipitate that should be avoided.

(+)-Catechin↗

SDOM (Storage Deployment Optimization Model) [SWR-21-73]

SDOM is designed to accurately represent the operation of energy storage across different timescales, including long-duration and seasonal applications, and the spatiotemporal diversity and complementarity among VRE sources. SDOM uses an hourly temporal resolution, a fine spatial resolution for VRE sources, and a 1-year optimization window. SDOM assumes that all builds of VRE are accompanied by sufficient additional transmission capacity to allow full utilization of these additional resources. Nuclear, hydropower, and other renewable generation (e.g., biomass and geothermal energy sources) are fixed based on operational data (time series) for a given year; thus, SDOM minimizes total system cost using conventional generators as balancing units and using VRE and storage technologies to achieve a user-defined carbon-free or renewable energy target. The total system cost includes capital costs, fixed operation-and-maintenance (FO&M) costs, variable operation-and-maintenance (VO&M) costs, and fuel cost for power generation and storage technologies.

Guerra Fernandez, Omar Jose↗

2012 Renewable Energy Data Book [Book]

This Renewable Energy Data Book for 2012 provides facts and figures in a graphical format on energy in general, renewable electricity in the United States, global renewable energy development, wind power, solar power, geothermal power, biopower, hydropower, advanced water power, hydrogen, renewable fuels, and clean energy investment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Dehydration Membrane Reactor for Production of Valuable Chemicals from CO 2 and H 2

GTI Energy and partners have been developing a technology for production of liquefied petroleum gas (LPG) from carbon dioxide (CO 2 ) and hydrogen (H 2 ) using a novel catalytic membrane reactor. The reactor contains a bi-functional catalyst for methanol synthesis and LPG synthesis, resulting in LPG production in a single reactor. A transformational dehydration membrane is used to remove water in situ, shifting the thermodynamic equilibrium towards product formation. As a result, CO 2 conversion as high as 90.2% and LPG yield as high as 60.5% were obtained at 300°C and 20 bara in the membrane reactor, which significantly exceed the literature results of the traditional reactors

03 NATURAL GAS↗

Wavelet Analysis of GPR Data for Belowground Mass Assessment of Sorghum Hybrid for Soil Carbon Sequestration

Among many agricultural practices proposed to cut carbon emissions in the next 30 years is the deposition of carbon in soils as plant matter. Adding rooting traits as part of a sequestration strategy would result in significantly increased carbon sequestration. Integrating these traits into production agriculture requires a belowground phenotyping method compatible with high-throughput breeding (i.e., rapid, inexpensive, reliable, and non-destructive). However, methods that fulfill these criteria currently do not exist. We hypothesized that ground-penetrating radar (GPR) could fill this need as a phenotypic selection tool. In this study, we employed a prototype GPR antenna array to scan and discriminate the root and rhizome mass of the perennial sorghum hybrid PSH09TX15. B-scan level time/discrete frequency analyses using continuous wavelet transform were utilized to extract features of interest that could be correlated to the biomass of the subsurface roots and rhizome. Time frequency analysis yielded strong correlations between radar features and belowground biomass (max R −0.91 for roots and −0.78 rhizomes, respectively) These results demonstrate that continued refinement of GPR data analysis workflows should yield an applicable phenotyping tool for breeding efforts in contexts where selection is otherwise impractical.

Wolfe, Matthew↗

The Impact of Aerosols Generated from Biomass Burning, Dust Storms, and Volcanoes Upon the Earth's Radiative Energy Budget

A new technique for detecting aerosols from biomass burning and dust is developed. The radiative forcing of aerosols is estimated over four major ecosystems in South America. A new smoke and fire detection scheme is developed for biomass burning aerosols over South America. Surface shortware irradiance calculations are developed in the presence of biomass burning aerosols during the SCAR-B experiment. This new approach utilizes ground based, aircraft, and satellite measurements.

Christopher, Sundar A.↗

A National Resource Availability Assessment for Microalgae Biofuel Production

The objective of the study discussed here is to provide a comprehensive, multi-scale assessment of microalgae production potential at the farm scale and aggregating this information to regional and national scales utilizing readily available, but highly detailed information. Within a GIS framework, microalgal biomass productivities are being estimated for different types of microalgae (fresh-water versus brackish and salt-tolerant) cultured in open ponds with varying salinity and mineral content in different climatic zones (i.e., solar radiation, temperature). Spatial and temporal information on critical resource demands and constraints are being developed from a combination of best available data and state-of-the-art multi-scale spatial water and energy balance modeling. Site specific sustainable production rates will be evaluated based on climatic conditions, land, and consumptive water requirements, and competing uses for available land, water, and nutrients. Expected results include scalable data and models to assess optimal locations for microalgae production across the nation, within regions, at specific sites. This effort is in its early stages, so the focus of this paper is in describing the overall approach, the scientific basis for this approach, description of the algae environmental constraints and growth rates,; resource database development, water and energy budget models, and the national scale assessment tool.

biofuels↗

Systems and methods for continuously fermenting C5 and C6 saccharides

This invention provides optimized fermentation of cellulosic and hemicellulosic sugars. Biomass-derived hemicellulosic and cellulosic sugars are independently conditioned and separately fermented, utilizing reuse and recycle of microorganisms, metabolic intermediates, and nutrients. Conditioned sugars can be fermented in separate vessels, where excess cells from glucose fermentation are conveyed to hemicellulose sugar fermentation along with raffinate from solvent recovery, to enhance productivity and product yield. Some variations provide a method of fermenting C5 and C6 sugars to fermentation products, the method comprising: fermenting a C6-rich sugar feed to a first fermentation product; fermenting a C5-rich sugar feed to a second fermentation product; removing microorganism cells from the first fermentor, to maintain a cell concentration within a selected range; conveying microorganism cells to a second fermentor; and removing microorganism cells from the second fermentor, to maintain a microorganism cell concentration that is greater than that in the C6-rich fermentor.

Survase, Shrikant↗

Integrated Biorefinery Research Facility: Partnering with Industry to Advance the Bioeconomy

NREL's National Bioenergy Center has entered into more than 130 collaborations in recent years with companies ranging in size from start-ups to those that appear on Fortune magazine's Fortune 100 list. The Integrated Biorefinery Research Facility (IBRF) showcases NREL's commitment to collaboration and to meeting the nation's biofuels and bioproducts development and deployment goals. Designed to speed the growth of the biofuels and bioproducts industries, the IBRF is a unique $33.5-million pilot facility capable of supporting a variety of projects.

bioenergy↗

Use of Lignin-Based Admixture as Water Reducer (WRA) for Tailoring the Rheological Properties of Mortars for 3D-Printing

Efforts towards decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced mortar and concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a highly reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of commonly used polycarboxylate ethers (PCEs) with a smaller carbon footprint. These lignin-based plasticizers developed at NREL can be used in place of petrochemical-derived superplasticizers to tailor the rheological properties of cement-based systems for applications such as additive manufacturing while reducing the carbon intensity of the concrete mix. Lignosulfonates derived from paper pulping were historically used as water reducers only to be displaced with the rise of PCEs. The present study examines the use of a NREL produced lignin-based water reducing admixture (WRA), in cement pastes and mortar mixtures for 3D-printing at small- (mm) scale. The experimental program consisted of different formulations of oxidized lignin-based WRAs added in variable dosages to cement pastes with a fixed water-to-cement ratio. The objective is to achieve an appropriate workability, extrudability and buildability of mortar mixtures to produce 3D-printed specimens. The rheological characterization was performed to compare the initial yield stress and viscosity of the different mixtures with lignin-based admixture with respect to conventional PCE superplasticizers. The rheological characterization shows that the proposed material act as an effective water-reducer in cement systems, affecting the yield stress, plastic viscosity, and structuration rate of the mixtures evaluated. On the other hand, the effect on early hydration process of the cement pastes containing lignin-based admixtures is comparable to conventional superplasticizers.

3D-printing↗

Envisioning an Ecologically Sustainable Campus At New England College

Appropriation funding for our project Ecologically Sustainable Campus - New England College (NH). 67.09. supported five environmental initiatives: (1) a wood pellet boiler for our Science Building, (2) solar hot water panels and systems for five campus buildings, (3) campus-wide energy lighting efficiency project, (4) new efficiency boiler system in Colby Residence Hall, and (5) energy efficient lighting system for the new artificial athletic turf field. (1) New England College purchased and installed a new wood pellet boiler in the Science Building. This new boiler serves as the primary heating source for this building. Our boiler was purchased through New England Wood Pellet, LLC, located in Jaffrey, New Hampshire. The boiler selected was a Swebo, P500. 300KW wood pellet boiler. The primary goals, objectives, and outcomes of this initiative include the installation of a wood pellet boiler system that is environmentally friendly, highly efficient, and represents a sustainable and renewable resource for New England College. This project was completed on December 15, 2010. (2) New England College purchased and installed solar hot water panels and systems for the Science Building, the Simon Center (student center), the H. Raymond Danforth Library, Gilmore Dining Hall, and Bridges Gymnasium. The College worked with Granite State Plumbing & Heating, LLC, located in Weare, New Hampshire on this project. The solar panels are manufactured by Heat Transfer; the product is Heat Transfer 30-tube collector panels (Evacuated Tube Type) with stainless steel hardware. The interior equipment includes Super Stor Ultra stainless steel super insulated storage tank, Taco 009 Bronze circulator pump, Solar Relay Control Pack, and a Taco Thermal Expansion Tank. The primary goals, objectives, and outcomes of this initiative will allow the College to utilize the sun as an energy resource. These solar hot water panels and systems will alleviate our dependency on fossil fuel as our primary fuel resource and provide a reliable energy source that supplies the hot water needs for sanitation, dishwashing at our dining facilities, and shower facilities for our athletes. This project initiative was completed on June 30, 2010. (3) New England College has completed energy efficiency lighting projects throughout campus, which included upgrades and new systems throughout our buildings. This project also installed efficiency controls for the Lee Clement Arena and refrigeration equipment in the Gilmore Dining Hall. The College worked with Atlantic Energy Solutions, located in Foxboro, Massachusetts on our 50/50 energy efficiency lighting project and campus-wide audit. The actual implementation of the project was completed by D. Poole Electrical Services, located in Center Barnstead, New Hampshire. The primary goals, objectives, and outcomes of this initiative were to install energy efficient lighting systems throughout our campus buildings, which ultimately will provide New England College with a more efficient way to manage and control its energy use. This project initiative was completed on February 15, 2010. (4) New England College purchased and installed a high efficiency and clean burning system for the Colby Residence Hall, which is the primary housing for our freshman. We purchased and installed two Buderus Boilers, model number G515/10 with two Riello Burners, model number RL 38/2. The College worked with Granite State Plumbing & Heating, LLS, located in Weare, New Hampshire on the installation of this high efficiency and clean burning system for the Colby Residence Hall. The primary goals, objectives, and outcomes for this initiative included the installation of a designed system of two boilers to provide redundancy for backup measures. This new system will provide New England College the flexibility to utilize just one smaller boiler to provide heat and hot water during non-peak periods thus continued reduction in energy use and our carbon footprint. This project initiative was completed on September 18, 2009. (5) New England College purchased and installed energy efficient lighting for our new artificial athletic turf field. The College selected Light-Structure Green lighting systems and worked with Musco Lighting, located in Oskaloosa. Iowa. The primary goals, objectives, and outcomes of this initiative were to install innovative lighting systems that significantly reduce energy costs and provide a high level of efficiency, resulting in overall utility savings to the College. This lighting technology combines the energy efficient equipment along with a focused lighting objective (field playing surface) to reduce the number of lighting heads needed to illuminate the playing surface to NCAA standards while reducing energy consumption by 50%. This project was completed on October 15, 2009.

09 BIOMASS FUELS↗

Maximizing long-term biohydrogen production with Clostridium thermocellum for high solids conversion of lignocellulosic biomass

Biological hydrogen production from lignocellulosic biomass sustainably couples organic waste reduction with renewable energy generation. Efficient conversion is challenged by the structural complexity of lignocellulose and resulting recalcitrance to enzymatic degradation. Clostridium thermocellum natively breaks down biomass with highly effective hemi-/cellulases systems (i.e., cellulosomes) and generates hydrogen in anaerobic cultivation, creating a compelling platform for lignocellulosic biohydrogen production. Achieving commercially viable production rates requires balancing high biomass loading and throughput against uniform mixing conditions required for enzyme dispersion, pH and temperature control, and efficient hydrogen and metabolite removal in continuous operation. To address these barriers to process intensification, we implemented novel reactor and process designs for high-solids lignocellulosic biomass fermentations using the C. thermocellum KJC19-9 strain, genetically engineered for co-utilization of cellulose and hemicellulose sugars (i.e., xylose). Via computational fluid dynamics (CFD) modeling and experimental validation, we achieved a >50% improvement in biohydrogen production with an improved anchor-type impeller morphology, coupled to a threefold reduction in agitation rate. To further reduce rheological constraints and accumulation of toxic metabolites, we then transitioned the process to sequencing fed-batch operation. The resulting process generated 24.87 L H 2 L −1 from 160 g L −1 of deacetylated and mechanically refined (DMR)-pretreated corn stover biomass over 16 days while solubilizing >95% of influent cellulose and hemicellulose, setting a new performance benchmark for continuous production of biohydrogen from lignocellulose.

08 HYDROGEN↗

Three-dimensional hierarchical and interconnected honeycomb-like porous carbon derived from pomelo peel for high performance supercapacitors

The urgent need for sustainable development of human society has forced material scientists to explore novel materials starting from cheap natural precursors for next-generation energy storage devices by using environmentally friendly strategies. In this work, heteroatom-functionalized porous carbonaceous materials with 3D hierarchical and interconnected honeycomb-like structure have been successfully synthesized by using waste biomass pomelo peel as raw material through the combination of hydrothermal carbonization and followed KOH activation procedure. Benefiting from the unique honeycomb-like structure and high specific surface area, the as-obtained carbon material exhibits satisfactory capacitive behavior: 374 F/g at 0.1 A/g; excellent cycling stability of 92.5% capacitance retention over continuous 5000 cycles. More importantly, the as-assembled symmetric supercapacitors based on as-prepared electrode material can deliver high gravimetric and volumetric energy density of 20 W h/kg and 18.7 W h/L in 6 M KOH, respectively, as well as outstanding cycling stability. The obtained results demonstrate the possibility for taking full advantage of sustainable and large scale advanced carbon materials by choosing waste biomass, particularly the pomelo peel as a raw material. - Graphical abstract: 3D hierarchical and interconnected honeycomb-like porous carbonaceous materials (HPGC) from waste biomass (pomelo peels) were successfully prepared through the combination of hydrothermal carbonization and followed KOH activation procedure. The as-obtained carbon material exhibits satisfactory capacitive behavior. The obtained results demonstrate the possibility for taking full advantage of sustainable carbon materials by choosing biomass waste provided by nature as raw materials. Display Omitted - Highlights: • Pomelo peel was utilized to fabricate heteroatom-functionalized porous carbonaceous materials. • The as-prepared carbon materials contains 3D hierarchical and interconnected honeycomb-like structure. • The obtained carbon material and symmetric device exhibits superior electrochemical performances for supercapacitor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renewable Energy Optimization Report for Naval Station Newport

In 2008, the U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage the development of renewable energy (RE) on potentially contaminated land and mine sites. As part of this effort, EPA is collaborating with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to evaluate RE options at Naval Station (NAVSTA)Newport in Newport, Rhode Island. NREL's Renewable Energy Optimization (REO) tool was utilized to identify RE technologies that present the best opportunity for life-cycle cost-effective implementation while also serving to reduce energy-related carbon dioxide emissions and increase the percentage of RE used at NAVSTA Newport. The technologies included in REO are daylighting, wind, solarventilation preheating (SVP), solar water heating, photovoltaics (PV), solar thermal (heating and electric), and biomass (gasification and cogeneration). The optimal mix of RE technologies depends on several factors including RE resources; technology cost and performance; state, utility, and federal incentives; and economic parameters (discount and inflation rates). Each of these factors wasconsidered in this analysis. Technologies not included in REO that were investigated separately per NAVSTA Newport request include biofuels from algae, tidal power, and ground source heat pumps (GSHP).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

CHALLENGES AND STRATEGIES ON FIBROUS FEEDSTUFFS DENSIFICATION AND ITS INTERACTION WITH LIQUID INGREDIENTS

There has been continuing interest and support in using herbaceous biomass, mostly agricultural crop residues, in the U.S. as feedstocks for producing bioenergy, liquid transportation fuels, and industrial chemicals/materials. With the potential of greater collection of agricultural crop residues for the foregoing industrial applications there will be a commensurate greater availability of crop residues for utilization in agricultural production. Agricultural crop residues are typically used in agricultural production as roughage or bedding for cattle. Use of herbaceous biomass, corn stover of greatest interest at the present time, and processing coproducts thereof, as a feed ingredient presents an opportunity to reduce ration costs and improve livestock enterprise profitability by replacing an amount of corn and other feed grains in livestock diets with proper formulation. The obvious advantage of utilizing corn stover is its wide availability and low cost.

09 BIOMASS FUELS↗