Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMODITIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Advanced Network Research at Fermilab [PowerPoint]

Topics covered: • About Fermilab • Why do we need advanced network research at Fermilab? • Advanced network facilities at Fermilab • Major research projects – WireCap: a novel packet capture engine for commodity NICs in high-speed networks • http://wirecap.fnal.gov – mdtmFTP: a high performance data transfer tool (funded by DOE ASCR, \$1.5M) • http://mdtm.fnal.gov – BigData Express (funded by DOE ASCR, \$2.2M) • http://bigdataexpress.fnal.gov – Quantum network research (funded by DOE ASCR, \$3.2M)

43 PARTICLE ACCELERATORS↗

Techno-Economic Analysis for the Production of Algal Biomass via Closed Photobioreactors: Future Cost Potential Evaluated Across a Range of Cultivation System Designs

In this assessment, we have evaluated target minimum biomass selling prices (MBSPs) of algae biomass production for four photobioreactor (PBR) designs compared to a previous open pond target case. We utilized techno-economic assessment modeling to determine if the target PBR cases can compete with open ponds for low-cost commodity fuels in an 'n th -plant' scenario. In the process, algal biomass is produced in one of the five cultivation options, including: open ponds, horizontal tubes, helical tubes, and two vertical bag/panel designs termed 'GWP-II flat panels' and 'Leidos hanging bags.' The projected target cultivation productivity for each PBR design was estimated based on the most credible literature data presenting PBR and pond cultivation on a directly comparable basis, and then extrapolating out to the future. Resulting productivities on an aerial basis were estimated to range from 25 g/m 2 /day to 52.5 g/m 2 /day (cultivation area). CO 2 , nutrients, and algae inoculum are supplied to the production area. After cultivation, the biomass is dewatered to 20 wt% solids in three stages including in-ground gravity settling, membrane filtration, and centrifugation. CO 2 piping, water piping, and storage are also included in the analysis. Based on our recently published 'algae farm' design report, the open pond cultivation benchmark was set at an MBSP of $494/ton ash-free dry weight (AFDW). The horizontal tubes are large volume reactors with productivity similar to that of open ponds, but result in an MBSP of $708/ton AFDW. The helical tubes are made from glass and have a high capital investment resulting in a MBSP of $1,737/ton AFDW. The GWP-II PBR is a vertical flexible plastic flat-panel system with an estimated MBSP of $1,793/ton AFDW. Finally, the Leidos hanging bag system, which derives cultivation cost values based on inputs furnished by Algenol, results in an estimated MBSP of $639/ton AFDW.

09 BIOMASS FUELS↗

Groundwater Potability Determination Report for Sylvan Grove, Kansas

The Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) operated a grain storage facility from 1954 to 1966 at the northeastern edge of Sylvan Grove, Kansas (Figures 1.1 and 1.2). During this time, commercial grain fumigants containing carbon tetrachloride were in common use to preserve grain in storage. The CCC/USDA is in the process of preparing a Corrective Action Study (CAS) to address carbon tetrachloride contamination in groundwater on the portion of the site that it formerly leased and operated. As stated in the Kansas Department of Health and Environment (KDHE) Bureau of Environmental Remediation (BER) policy BER-RS-045 (KDHE 2016), Considerations for Groundwater Potability and Use Determinations (hereafter referred to as “Potability Determination Guidance”), the KDHE considers all groundwater to be a potential source of potable water. This report, however, substantiates that groundwater resources in the Cretaceous Dakota Formation—more specifically, that localized portions of water bearing strata affected by operations at the former CCC/USDA site—are non-potable. The purpose of this report, therefore, is to provide additional information to support the KDHE’s decision-making process with regard to the disposition and closure of the Sylvan Grove site. Per the Potability Determination Guidance the results of this potability evaluation will play a role in selecting the site remedial action objectives and the overall proposed path for long-term management. This report presents the data and analyses of the potability study and the results of the potability determination, which will be taken into consideration during the development of cleanup goals for the CAS or for any other future remedial or long-term management action agreed to by the CCC/USDA and KDHE. The Potability Determination Guidance provides a framework to evaluate groundwater potability by outlining: The set of threshold criteria under which KDHE will consider an aquifer to be non-potable; The data and information necessary to evaluate potability; and, Considerations for long-term management of aquifers that are deemed non potable. According to the guidance, the KDHE may determine that groundwater is non-potable due to natural conditions such as water quality or quantity characteristics. As suggested in the guidance, this report will discuss the initial potability threshold screening for entering the evaluation process (Section 2); justify the work plan that was covered by the site investigation planning (also in Section 2); and present the relevant data and evaluation results (Sections 3-6).

54 ENVIRONMENTAL SCIENCES↗

Corrective Action Study for the Former CCC/USDA Facility at Agra, Kansas

This Corrective Action Study (CAS), consistent with the guidance of the Kansas Department of Health and Environment (KDHE 2001a), has been prepared for the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) grain storage facility formerly located in Agra, Kansas.

54 ENVIRONMENTAL SCIENCES↗

A Model for Lean Corporate/ Startup Interfaces: Unlocking Resources of Midcap Corporations Providing a Pathway to Advanced Energy Technologies

Commercializing energy technologies through traditional market pathways is challenging for early-stage energy innovators. Development cycles in energy are long and expensive, and adoption is difficult, making energy technologies of limited interest to venture capital relative to industries with faster growth and shorter product life cycles such as life sciences and software. As such, partnerships with established corporations are one of the most promising, and in some cases only, go-to-market pathways for energy technologies. Startups often seek to work with, large well-known Fortune 500 (and similar) companies. However, the size and risk aversion of those firms often makes partnering challenging. It can take well over 12 months for a large corporation to agree to commercial terms and get internal board / management approval to move forward with a binding agreement with a startup for even a simple starting partnership. This timeline is prohibitive for most early-stage companies who are both time and money constrained, and often working in highly competitive commodity sectors. Mid-cap corporations ($\$ $100M to $\$ $10B) are a promising but untapped resource for partnering with technology developers because they are often nimbler, tend to be fiercely competitive, and are looking for new revenue or cost-saving opportunities. These factors make them both more receptive to disruptive technologies, and more capable of integrating them. However, while Fortune 500 companies often have venturing groups that facilitate the initial connection process, most midcap incumbents do not have the resources to create standalone corporate venture groups. As a result, although they could help each other significantly (startup technologies make midcaps more competitive; midcaps offer a faster commercialization pathway to startups), midcap companies and startups rarely work together. In 2017, ADL Ventures (ADL) received Award #DE-EE0008111 from DOE EERE’s Innovative Pathways program to unlock the domain expertise and material resources of midcap companies. The goal of the award was to support energy technology commercialization via an innovation platform for startups to interface with midcap corporations. During the grant period, we have developed a novel open innovation platform that allows financially conservative incumbents to efficiently engage with energy innovators and startups, thereby unlocking the incumbents’ domain expertise, strategic capital, R&D facilities, supply chain, and pathways to market. We have executed full-scale open innovation challenges for three clients, exceeding the initial proposed goal of two. We also built a diversified opportunity pipeline which resulted in four projects contracted for 2020, meeting the goals of the proposal, with others pending.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

HERON as a Tool for LWR Market Interaction in a Deregulated Market

This document reports the development of HERON (Holistic Energy Resource Optimization Network), a newly-developed RAVEN (Risk Analysis Virtual ENvironment) plugin for grid and capacity optimization, to technoeconomic analysis in a deregulated market. A short description of the HERON plugin is provided, and the release process is described. HERON as a plugin enables RAVEN to perform stochastic technoeconomic analysis of grid-energy systems in a generic approach. The primary function of HERON is to generate the complex RAVEN workflows necessary to optimize component capacities under stochastic systems. HERON is capable of analyzing systems with complex components transferring a variety of commodities, including production components and varied markets. HERON is capable of optimizing high-resolution dispatch for such systems and guiding stochastic optimization algorithms in RAVEN for finding optimal component capacities. In particular, this document demonstrates the application of HERON to systems with deregulated markets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Environmental Investigations at Former CCC/USDA Facilities: Master Work Plan (Vols 1 and 2)

The Commodity Credit Corporation (CCC) of the U.S. Department of Agriculture (USDA) has entered into an interagency agreement with the U.S. Department of Energy (DOE) under which Argonne National Laboratory provides the CCC/USDA with technical assistance for site characterization investigations and remediation efforts at its former grain storage facilities in Kansas, Nebraska, and Missouri (and possible other states), where carbon tetrachloride is the contaminant of primary concern. Argonne’s environmental investigations at these facilities are based on an expedited approach to site characterization that Argonne developed, which became the basis for Standard D6235-98 (now Standard D62351-18; revised in 2004 and 2018) of the American Society for Testing and Materials (ASTM 2018).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable Electrolytic Systems for Renewable Hydrogen Production (Cooperative Research and Development Final Report, CRADA Number CRD-18-747)

The project focuses on offshore wind energy which is an emergent renewable energy source in the United States. Onsite hydrogen production for this sector is not available. The overall goal of GTA's work is development of scalable multi-megawatt water electrolysis systems that exclude platinum group metals, are constructed from readily available commodity materials and are mass produced using advanced manufacturing and robotics. They fabricated and successfully tested a scalable TRL 4 laboratory prototype that demonstrated promising results for achieving the goal. They further performed calculations and prepared scale drawings for an envisioned onsite TRL 8 electrolytic hydrogen production system at an offshore 8 MW wind turbine. The work plan of the CRADA proposal between NREL and GTA focuses on validation of the current TRL 4 prototype with potential development and refinement for advancement to a TRL 5 system. GTA, Inc. proposes joining the H2@Scale consortium to leverage DOE funds, benefit from and contribute to the common knowledge-base and work with NREL as a CRADA partner.

30 DIRECT ENERGY CONVERSION↗

Open Source Platform for Live Processing of High Data Rate Electron Microscopy (SBIR Phase I Award Topic 15, Subtopic B, Final Scientific / Technical Report)

4D scanning transmission electron microscopy (STEM) is experiencing a revolution both in terms of data size, and data veracity, as are many other areas of experimental data acquisition. This presents enormous opportunities to make new scientific discoveries, but is also hamstrung by aging software that is no longer fit for purpose. Experimental data acquisition platforms must make the same investments in software infrastructure that the simulation community made decades ago to take advantage of high-performance computing (HPC) if they hope to realize the full potential of the latest advances made in detector technology. This requires rethinking the design and deployment of hardware, moving away from small, fixed commodity computing capabilities with closed interfaces to open, modular, scalable systems designed for parallelism and throughput. The technical approach will leverage best-in-class open source technologies, and develop new approaches strategically to build an open source platform for experimental data acquisition targeting high data rate electron microscopy. The project will develop a software platform that uses the power and performance of modern HPC resources to ingest the large volume of data produced by electron microscopes using direct electron detectors. A set of configurable pipelines will be used to enable the processing to be tailored to the problem being investigated with builtin visualization of data at interactive rates. This project will leverage investments made by the DOE and other agencies to provide a powerful software platform for the experimental data community working with most powerful electron microscopes, such as 4D STEM detectors. It will create a platform that serves as a reference for the community. Permissive open source licensing will make the platform available to all, with a simple deployment strategy offering the ability to keep data close to where it is generated. This advanced software platform will require customization for each deployment, creating opportunities for software services that are typically offered to extend open source software platforms.

97 MATHEMATICS AND COMPUTING↗

Development and Operation of a High Throughput Computer Hard Disk Drive Recycling Enterprise (CRADA NFE-16-05989)

The aim of this collaborative effort is to develop, construct and operate a high throughput computer hard disc drive (HDD) recycling system. Research conducted as part of the Critical Materials Institute (CMI), a Department of Energy (DOE) Energy Innovation Hub, has revealed the economic rationale and the necessary technology for a potentially viable HDD recycling enterprise. Moreover, the very notion of CMI is the development of replacement sources of rare earth critical materials that enable the U.S. to become less dependent on single source supplies. Focused on end-of-life (EOL) consumer products containing rare earth permanent magnets, this cooperative endeavor will develop, construct and operate a highly automated recycling process. Demonstrating economically viable recycling of high value products is largely an untapped resource in the U.S. Recycling HDDs to recover rare earth magnets and other valuable materials (e.g. aluminum, steel, printed circuit boards, copper, etc.) presents a new opportunity to satisfy U.S. demand for highly desirable commodities. The goal of this cooperative research and development agreement (CRADA) project is to create a commercial HDD recycling enterprise that changes the landscape of rare earth magnet material and magnet availability for U.S. manufacturers. Underpinning this primary goal is the development and demonstration of an economic HDD recycling process that provides a significant and alternative supply of rare earth magnets that is not dependent upon foreign sourcing. Oak Ridge National Laboratory (ORNL) has researched the technology options and down selected specific sub-process technologies based upon throughput and economic potential. The participant, however, brings significant process design, development and operational experience that may result in process improvement or optimization strategies that will be explored in collaboration with the contractor. The final outcome of this CRADA is a system/process for recycling large quantities of HDDs. The technology is available for commercial scale-up.

42 ENGINEERING↗

Conversion of cellulosic biomass-based sugars to mevalonate for downstream chemical upgrading and market development

In collaboration with Visolis, ABPDU researchers have demonstrated a viable path for conversion of cellulosic feedstocks into renewable precursors for commodity fuels and chemicals. This process was demonstrated with equal success for both glucose and xylose conversion. Following proof of concept in 2L bioreactors, the process was scaled and demonstrated in a 50L bioreactor.

09 BIOMASS FUELS↗

Developing renewable free fatty acid surfactants to form diesel blendstocks

Sylvatex technology blends renewable components into diesel to create a low-carbon, blended fuel with significantly cleaner emissions. Sylvatex MicroX blendstock uses low-cost inputs to produce both the fuel additive and alternative fuel products. LBNL worked with to evaluate various hydrolysates and explore different feedstocks that can be grown as commodities and used to produce the renewable surfactant.

09 BIOMASS FUELS↗

Impacts of High Variable Renewable Energy Futures on Electric-Sector Decision Making: Demand-Side Effects

Previous work by the Berkeley Lab describes how high shares of variable renewable energy (VRE) such as wind and solar power could change wholesale electricity price dynamics. These include the timing of when electricity is cheap or expensive, locational differences in the cost of electricity, and the degree of regularity or predictability in those costs. Many decentralized decision-makers on the demand-side may not yet have considered the implications of these possible future changes. In this report, we evaluate the sensitivity of a set of demand-side decisions to different levels of VRE penetration ranging from a low of 5-20% to a high of 40-50%. The analysis builds on hourly wholesale energy and capacity prices in different VRE scenarios for four wholesale markets in the United States for the year 2030 (CAISO, ERCOT, NYISO, and SPP). The principal question for this exploration is whether private and public electric-sector decisions that are made based on assumptions reflecting low VRE levels still achieve their intended objective in a high VRE scenario with 40-50% wind and solar? This scoping report evaluates the impacts of changing patterns of peak system needs on the benefits of demand reductions by examining the altered value of different energy efficiency (EE) measures. Similarly, we investigate new opportunities for large energy consumers that may arise from periods with very low wholesale electricity prices. We calculate the value of new process investments (e.g., hydrogen production and other generalized electro-commodities), showcase the varying value of new product storage investments (such as reservoir extensions at a desalination plant), and estimate the benefits of increased process flexibility that uses electricity as a process-input in addition to traditional fossil fuels (e.g., district energy systems). Finally, many decentralized decision-makers and end-use customers are not directly exposed to wholesale electricity prices but instead receive price signals from their retail electricity rates. As wind and solar shares increase, we compare the economic efficiency of flat retail rates relative to more dynamic time-of-use tariffs with and without critical peak-pricing events.

14 SOLAR ENERGY↗

FY20 ASC IC L2 Milestone 7180: Performance Portability of SIERRA Mechanics Applications to ATS-1 and ATS-2. Executive Summary

The overall goal of this work was to accelerate simulations supporting the nuclear deterrence (ND) mission through improved performance of key algorithms in the ASC IC Sierra multi-physics application suite. This work focused on porting and optimizing algorithms for the graphics processing units (GPU) on the second ASC advanced technology system (ATS-2), while maintaining or improving performance on commodity technology systems (CTS) and ATS-1. Furthermore, these algorithmic developments used the ASC developed Kokkos performance portability abstraction library to maintain high performance across platforms using identical code, and enable sustainable reduced-cost migration and performance optimization to emerging hardware.

97 MATHEMATICS AND COMPUTING↗

Snowmass Letter of Interest - Cloud Computing - CompF4

The world currently spends more than $30B per quarter on the consumption of Cloud Computing services. This is 17 times the size of the entire FY20 budget for the Office of Science at the Department of Energy. These resources have been successfully used for scientific computing in HEP and elsewhere under a pay-as-you-go model where users are billed monthly based on the resources they have consumed. There are a wide range of Cloud services, but we categorize them into “capability” and “capacity”. Capability services represent a unique set of features that we have not provisioned on-premises for a variety of reasons (cost-effectiveness, power consumption, proprietary solutions, etc.) Capacity services are services that allow us to scale out commodity services; historically we have focused on high-throughput (batch) computing.

97 MATHEMATICS AND COMPUTING↗

Analysis and Planning Framework for Nuclear Plant Transformation

Commercial nuclear power in the United States has been an unqualified success by any measure, providing low cost, carbon-free, and safe baseload electricity for decades. The industry today is at the peak of its historical performance in terms of generation output, reliable operations, and demonstrated nuclear safety. However, it is no longer among the lowest-cost electric generation sources with the emergence of subsidized renewables and shale gas generation. The business model that has served the operating nuclear fleet so well over its life is now a drag on cost performance due to its reliance on a large highly skilled labor force. In contrast, digital technology and innovation are enabling dramatic efficiencies in energy production, resulting in fierce competition for a commodity such as electricity. The nuclear power industry has responded to this challenge with many initiatives to improve efficiency and modernize plant equipment, especially where reliability and obsolescence issues are pressing. However, it would be a missed opportunity to merely modernize the plant components and the work processes of an outdated business model that was formulated to manage the technology of the 1960s. Rather, the greater opportunity is to transform that business model to one that fully exploits the capabilities of modern digital technology, resulting in substantially lower production costs and sustainable market viability. One successful example of such transformation is the concept of Integrated Operations, which was introduced into the North Sea oil and gas industry a couple of decades ago when the profitability of operating these fields was severely threatened by low world petroleum prices and the high overhead of operating the offshore oil and gas platforms. This effort resulted in significant changes to how these oil fields were operated and allowed the industry to continue profitable operation of these platforms. This example has some remarkable parallels to the U.S. commercial nuclear industry as described in the next section. This report provides an analysis and planning framework for such a nuclear plant operating model transformation based on the transferable learnings from the North Sea transformation. This framework is termed Integrated Operations for Nuclear or ION. This report describes the key principles and methods of Integrated Operations and how they are being applied in a collaboration between the DOE Light Water Reactor Sustainability Program and Xcel Energy in an initiative to transform its operating model for performance improvement and long-term sustainability. It describes a method to bring the operating costs of a nuclear fleet in line with market-based pricing, transforming work functions to reduce cost with technology innovations. This initiative will continue over the next several years in the detailed development of transformative concepts for nuclear plants, which will be published as follow-up to this initial report on Integrated Operations for Nuclear.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sources of Propane Consumed in California

Project Scope: The objective of this study is to specify the sources of propane consumed in California. It answers the questions, where does the propane used in California come from and how was it produced? The results of this study provide comprehensive, transparent, and verifiable estimates, based on the 2018 market. The information provided in this report is suitable for use to assess the life cycle carbon intensity of propane used as a transportation fuel in California. As the 2009 Low Carbon Fuel Standard (LCFS) aims to reduce California’s greenhouse gas (GHG) emissions and other smog-forming and toxic air pollutants, the appropriate designation of carbon intensity for propane as a transportation fuel is important for evaluating propane’s potential to contribute to GHG goals and understandings in the context of various actions. This study focuses on estimating the shares of total propane consumed in the state of California produced from petroleum refineries, natural gas plants, and bituminous sands sources inside California and elsewhere. Results: An estimated 590 million gallons of propane were consumed in California in 2018, of which, 59.5% originated from refinery production and 40.5% originated from natural gas plants. The majority of this was sourced from refinery production in California, 334 million gallons. Most of the propane imported to California for consumption was sourced from natural gas plants, 113 million gallons, with over half of the imported volume sourced from Canada. The volume sourced from bituminous sand upgrader and fractionator operations was negligible. Details from this analysis are presented in the table below which provides an overview of the propane flows estimated in this study by region and production method. The shares and volumes presented here represent a snapshot for 2018. A significant increase in propane demand, such as could be caused by increased use of propane as a transportation fuel in the state, would affect California’s propane production, imports, and exports. The method and data sources used for the estimates provided in this report also provide the framework which could be used for future updates. Key Method Considerations: The values presented here are based on a two-step approach where the first step was to determine the flows of propane into and out of California from different regions and the second step was to estimate the propane production methods in each region. A volume balance approach is used as the primary method for tracking the volume of propane in and out of California as propane production and import volumes are available by Petroleum Administration of Defense District (PADD) from EIA and neither inter-PADD propane transfers nor state-specific non-prime supplier consumption are available from a public data source. The volume balance performed for this study covered PADD 5 (the West Coast), which includes Arizona, California, Nevada, Oregon, and Washington. The volume balance used all available public datasets to determine propane production, imports, exports, and consumption. Volumes unaccounted for by these datasets were estimated using the resulting volume balance by assuming market equilibrium. Consumption within each state in PADD 5 was estimated based on known import, export, and production volumes and this amount was used to develop the volume balance. EIA only tracks consumption at the state level by prime supplier sales. The volume balance approach provides the basis to correct for additional propane consumed in-states where propane is transferred to California. To determine the California propane sources and trade in 2018. volume of propane consumed in California, the volume balance approach is again used where it was estimated all imported volumes not specifically flagged for re-export were consumed, and the remaining consumption was produced in-state. The California Energy Commission (CEC) provided the total volume of propane imported and exported from California in 2018; this volume data set along with commodity tracking from the Canada Energy Regulator (CER) and the International Trade Commission (ITC) which tracks port of entry and final destination was used to determine where propane originated from and where it was ultimately consumed. For example, the CER tracks propane leaving Canada and entering each state within the U.S. Imported propane from Canada to California – marked for California – is assumed to be consumed in California. When no further data were available, import volumes were assumed to be consumed in California without pass-through (i.e., no propane imported to California was directly sold and exported). In most cases, the production method for each propane source region was applied to the volume of propane transferred to California. In other words, the shares of propane sourced from natural gas and refineries for each production region was assigned to California imports based on their contribution to the total volume flows into California to determine the production method for propane consumed in-state. For volumes imported into California from PADD 4, Washington State, Canada, and the rest of the world (Argentina, Chile, Norway, Peru, South Korea, and Trinidad and Tobago), the volumes sourced from petroleum refineries and natural gas plants reflect the either production ratio for the region or, in cases where the sources specific to the amounts exported to California could be determined, the sources specific to the volumes transferred to California.

03 NATURAL GAS↗

A Scalable Solution Framework for Stochastic Transmission and Generation Planning Problems. Draft

Current commercial software tools for transmission and generation investment planning have limited stochastic modeling capabilities. Because of this limitation, electric power utilities generally rely on scenario planning heuristics to identify potentially robust and cost effective investment plans for a broad range of system, economic, and policy conditions. Several research studies have shown that stochastic models perform significantly better than deterministic or heuristic approaches, in terms of overall costs. However, there is a lack of practical solution approaches to solve such models. In this paper we propose a scalable decomposition algorithm to solve stochastic transmission and generation planning problems, respectively considering discrete and continuous decision variables for transmission and generation investments. Given stochasticity restricted to loads and wind, solar, and hydro power output, we develop a simple scenario reduction framework based on a clustering algorithm, to yield a more tractable model. The resulting stochastic optimization model is decomposed on a scenario basis and solved using a variant of the Progressive Hedging (PH) algorithm. We perform numerical experiments using a 240-bus network representation of the Western Electricity Coordinating Council in the US. Although convergence of PH to an optimal solution is not guaranteed for mixed-integer linear optimization models, we find that it is possible to obtain solutions with acceptable optimality gaps for practical applications. Our numerical simulations are performed both on a commodity workstation and on a high-performance cluster. The results indicate that large-scale problems can be solved to a high degree of accuracy in at most two hours of wall clock time.

24 POWER TRANSMISSION AND DISTRIBUTION↗