Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Single photon energy dispersive x-ray diffraction

With the pressure range accessible to laser driven compression experiments on solid material rising rapidly, new challenges in the diagnosis of samples in harsh laser environments are emerging. When driving to TPa pressures (conditions highly relevant to planetary interiors), traditional x-ray diffraction techniques are plagued by increased sources of background and noise, as well as a potential reduction in signal. In this paper we present a new diffraction diagnostic designed to record x-ray diffraction in low signal-to-noise environments. By utilising single photon counting techniques we demonstrate the ability to record diffraction patterns on nanosecond timescales, and subsequently separate, photon-by-photon, signal from background. In doing this, we mitigate many of the issues surrounding the use of high intensity lasers to drive samples to extremes of pressure, allowing for structural information to be obtained in a regime which is currently largely unexplored.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Extrinsic mechanism for giant dielectric response in Ba{sub 0.70}Sr{sub 0.30}(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} ceramic

To obtain the high dielectric constant, the effect of sintering process on the electrical properties of Ba{sub 0.70}Sr{sub 0.30}(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} ceramics were investigated. X-ray diffraction pattern of the samples at room temperature shows a monoclinic structure. Microstructure analysis shows well-grown and dense microstructure in all the samples. We found giant dielectric constant (∼3.59 × 10{sup 5}) with low dielectric loss (∼0.49) at room temperature for 2 hr sintered sample at 1250 °C. The extrinsic phenomena like interfacial polarization due to space charge accumulation at grain boundaries are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure study of BaCe{sub 0.85}Y{sub 0.15}O{sub 3-Δ} as solid state fuel cell material

The structural details of powder, dense and porous samples of BaCe{sub 0.85}Y{sub 0.15}O{sub 3−δ} (BCY15) used recently in an innovative monolithic design of SOFC were studied from multiple Rietveld analysis of neutron and x-ray diffraction patterns. The 3-layered monolithic assembly built from BCY15 material works as oxide ion conductor in the oxygen space, as proton conductor in the hydrogen area and as mixed conductor in the central membrane. We find that in all the samples of studied BCY15 based materials there are no indications of difference in crystallographic symmetry and the structure refinements did produce best agreement factors in orthorhombic Pnma space group.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tilted fluctuation electron microscopy

Fluctuation electron microscopy (FEM) is a scanning nanodiffraction-based method that offers a unique approach to characterizing nanometer-scale medium-range order (MRO) in disordered materials. In addition to determining the degree of MRO, careful analysis of scanning nanodiffraction data can also be used to determine strain in thin film amorphous samples. We applied FEM to characterize the strain and MRO of magnetron sputtered amorphous tantalum (a-Ta) thin films over a range of tilt angles from 0° to 45° in order to measure any deviations between the in-plane and out-of-plane strain and MRO. We validate our approach using electron diffraction simulations of FEM experiments for a-Ta. We measure anisotropic strain in the simulated a-Ta diffraction patterns and find that the experimental a-Ta is isotropically strained within the accuracy of our method. Our approach provides a workflow for acquiring tilted scanning nanodiffraction data, determining the relative strain and ordering as a function of in- A nd out-of-plane directions, and removing any artifacts induced in FEM data due to strain. We also describe some limitations of the tilted FEM method when applied to thin films with very low strains.

36 MATERIALS SCIENCE↗

Time-resolved studies of the order-disorder phase transformations in rare-earth-transition metal intermetallics with 2-17 stoichiometry

High-temperature order-disorder transformations in R{sub 2}T{sub 17} and R{sub 2}T{sub 17}-M-C intermetallics with R = Pr, Sm, Dy, Tb; T = Co, Fe; and M = Zr, Nb were studied utilizing time-resolved synchrotron x-ray diffraction at the Advanced Photon Source (APS) at the U.S. Department of Energy's Argonne National Laboratory (Argonne, IL). High-energy synchrotron radiation provides intense, highly penetrating x-rays, which are ideal for in situ studies of phase transformations. Alloying additions are used to stabilize formation of metastable phases; their influence on order recovery was investigated. The experimental setup utilized Debye-Scherrer geometry; specimens were heated at a rate of 10 K/min. Full-profile diffraction patterns collected every 10 s were refined in sequence using the Rietveld method to track changes of lattice parameters and phase assemblages during heating. Sharp changes observed in the evolution of temperature-dependent lattice parameters suggested formation of ordered structure via nucleation and growth. Both 2-17 polymorphs co-existed in light and heavy rare-earth systems at high temperatures. The presence of alloying additions in the solid solution greatly influenced long-range order formation.

43 PARTICLE ACCELERATORS↗

Spin Reorientation in Antiferromagnetic Layered FePt 5 P

FePt 5 P, a substitutional variant of the anti-CeCoIn 5 structure type in the space group P4/mmm, was synthesized by a high-temperature solid-state method and structurally characterized by X-ray diffraction. FePt 5 P contains layers of FePt 12 clusters formed by magnetically active Fe and heavy Pt with strong spin-orbit coupling (SOC); the layers are separated by P atoms. The various Fe–Pt distances in FePt 12 clusters generate complex magnetic orders in FePt 5 P. According to temperature-dependent magnetic and specific heat measurements, FePt 5 P shows a stripe-type antiferromagnetic order at T N ≈ 90 K, which is also confirmed by resistivity measurements. Furthermore, a spin reorientation occurs at ~74 and ~68 K in and out of the ab plane based on the specific heat measurements. The temperature-dependent neutron powder diffraction patterns demonstrate the antiferromagnetic order in FePt 5 P, and the spins orientate up to 58.4° with respect to the c axis at 10 K. First-principles calculations of FePt 5 P show the band splitting at the Fermi level by strong SOC and the s–d hybridization between P and Fe/Pt electrons enhances the structural stability and affects the magnetic ordering.

36 MATERIALS SCIENCE↗

Ferrimagnetism in strained Fe{sub 2}As thin films on Si(001)

We present the structural and magnetic properties of Fe{sub 2}As thin films grown on Si(100) by molecular beam epitaxy. From the reflection high-energy electron diffraction and x-ray diffraction patterns, the orientation of Fe{sub 2}As film on Si(100) was found to be a c-axis in the tetragonal crystal structure. The tetragonal Fe{sub 2}As thin film exhibited ferrimagnetic (FIM) ordering at room temperature. The magnetic moment of Fe{sub 2}As was 0.1 {mu}{sub B}/unit cell determined from the saturated magnetic moment. The observed FIM in Fe{sub 2}As films was attributed to the strain in the film.

36 MATERIALS SCIENCE↗

Facile route of biopolymer mediated ferrocene (FO) nanoparticles in aqueous dispersion

In this paper, we present a facile method for production stable aqueous dispersion of ferrocene (FO) nanoparticles. Ferrocene compounds were employed to achieve stable nanodispersions, stabilized with three different biopolymers namely, alginate, CM-dextran and chitosan. The nanoparticles produce are spherical, less than 10 nm in mean diameter and highly stable without any sedimentation. Fourier infrared transform (FTIR) and X-ray diffraction (XRD) studies confirmed the purity of ferrocene nanoparticles there is no modifications occur during the preparation route. FTIR spectra results were consistent with the presence of absorption band of cyclopentadienyl ring (C{sub 5}H{sub 5}{sup −} ion) which assigned to ν(C-C) vibrations (1409 cm-1), δ(C-H) stretching at 1001 cm{sup −1} and π(C-H) vibrations at 812 cm{sup −1}. Furthermore, all functional group for biopolymers such as C O from carboxyl group of CM-dextran and sodium alginate appears at 1712 cm{sup −1} and 1709 cm{sup −1} respectively, indicating there are steric repulsion interactions for particles stabilization. Powder X-ray diffraction patterns of sedimented samples of the biopolymers-stabilized ferrocene (FO) showed all reflections which were indexed respectively to the (−110), (001), (−201), (−111), (200), (−211), (210), (120) and (111) according to the monoclinic phase ferrocene. This confirmed that the products obtained were of high purity of Fe and EDAX analysis also suggests that the presence of the Fe element in the colloidal dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superhard Monoclinic Polymorph of Carbon

We report a novel phase of carbon possessing a monoclinic C2/m structure (8 atoms/cell) identified using an ab initio evolutionary structural search. This polymorph, which we call M-carbon, is related to the (2x1) reconstruction of the (111) surface of diamond and can also be viewed as a distorted (through sliding and buckling of the sheets) form of graphite. It is stable over cold-compressed graphite above 13.4 GPa. The simulated x-ray diffraction pattern and near K-edge spectroscopy are in satisfactory agreement with the experimental data [W.L. Mao et al., Science 302, 425 (2003)] on overcompressed graphite. The hardness and bulk modulus of this new carbon polymorph are calculated to be 83.1 and 431.2 GPa, respectively, which are comparable to those of diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study on the High-Pressure Behavior of Goethite up to 32 GPa Using X-Ray Diffraction, Raman, and Electrical Impedance Spectroscopy

Goethite is a major iron-bearing sedimentary mineral on Earth. In this study, we conducted in situ high-pressure x-ray diffraction, Raman, and electrical impedance spectroscopy measurements of goethite using a diamond anvil cell (DAC) at room temperature and high pressures up to 32 GPa. We observed feature changes in both the Raman spectra and electrical resistance at about 5 and 11 GPa. However, the x-ray diffraction patterns show no structural phase transition in the entire pressure range of the study. The derived pressure-volume (P-V) data show a smooth compression curve with no clear evidence of any second-order phase transition. Fitting the volumetric data to the second-order Birch–Murnaghan equation of state yields V 0 = 138.9 ± 0.5 Å 3 and K 0 = 126 ± 5 GPa.

58 GEOSCIENCES↗

On the microstructure and symmetry of apparently hexagonal BaAl{sub 2}O{sub 4}

The P6{sub 3} (a=2a{sub p}, b=2b{sub p}, c=c{sub p}) crystal structure reported for BaAl{sub 2}O{sub 4} at room temperature has been carefully re-investigated by a combined transmission electron microscopy and neutron powder diffraction study. It is shown that the poor fit of this P6{sub 3} (a=2a{sub p}, b=2b{sub p}, c=c{sub p}) structure model for BaAl{sub 2}O{sub 4} to neutron powder diffraction data is primarily due to the failure to take into account coherent scattering between different domains related by enantiomorphic twinning of the P6{sub 3}22 parent sub-structure. Fast Fourier transformation of [0 0 1] lattice images from small localized real space regions ({approx}10 nm in diameter) are used to show that the P6{sub 3} (a=2a{sub p}, b=2b{sub p}, c=c{sub p}) crystal structure reported for BaAl{sub 2}O{sub 4} is not correct on the local scale. The correct local symmetry of the very small nano-domains is most likely orthorhombic or monoclinic. - Graphical abstract: The electron diffraction pattern of BaAl{sub 2}O{sub 4} (left) is compatible with the 3-q superstructure corresponding to the conventional P6{sub 3}, a=2a{sub p} structure (p refers to the tridymite-related parent P6{sub 3}22 structure). Fast Fourier transforms (right) of small domains of lattice images, however, show that the local structure in fact is single q, and that true symmetry is monoclinic or orthorhombic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

90° Rotation of orbital stripes in bilayer manganite PrCa{sub 2}Mn{sub 2}O{sub 7} studied by in situ transmission electron microscopy

We present an in situ transmission electron microscopy study on the half-doped bilayer manganite PrCa{sub 2}Mn{sub 2}O{sub 7} to reveal the rotation process of the orbital stripes. Between the reported initial and final ordering phases, we identified an intermediate state with two sets of satellite spots to bridge the 90° rotation of the orbital stripes. Furthermore, we determined that the rotation of the orbital stripes does not always occur. Some restricted conditions for the orbital rotation to occur were found and reasons are discussed. - Graphical abstract: The intermediate state of the thermally induced 90° rotation of orbital stripes between two charge/orbital ordering CO1 and CO2 phase in the bilayer manganite PrCa{sub 2}Mn{sub 2}O{sub 7} is revealed by in situ TEM. A new state with two sets of satellite spots in the [001] electron diffraction patterns is found to bridge this transition. The reasons to this transition are explained. Highlights: ► Intermediate states to bridge the 90° rotation of the orbital stripes in bilayer manganite PrCa{sub 2}Mn{sub 2}O{sub 7} were identified. ► Some restricted conditions for the orbital rotation to occur were found and reasons were discussed. ► The reported CO2 phase at high temperatures in PrCa{sub 2}Mn{sub 2}O{sub 7} can also exist at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of solubility YAG:Nd nanocrystals in glass matrix

Highlights: {yields} The mixture of borate glass powder and YAG:5%Nd{sup 3+} nanocrystals was prepared. {yields} The samples were formed into pallets and annealed at different temperatures. {yields} The luminescence properties of composites depends crucially on annealing temperature. -- Abstract: The nanocomposites of Y{sub 3}Al{sub 5}O{sub 12}:Nd{sup 3+} (YAG:Nd) incorporated in borate glass were obtained. The single phase of YAG:Nd nanocrystals were obtained by sol-gel method. The borate glass was melted first and ground up then mixed with the nanocrystals. The samples were formed into pellets under pressure and were annealed in temperatures from the range 550-800 {sup o}C. The X-ray diffraction patterns show that together with increasing the temperature the contribution of Y{sub 3}Al{sub 5}O{sub 12} phase decreases and the new YBa{sub 3}B{sub 9}O{sub 19} phase is observed. The luminescence measurements indicates that the band structures and distribution of band intensities of glass-YAG:Nd nanocrystal composites depends crucially on annealing temperature.

36 MATERIALS SCIENCE↗

Observations of two-dimensional monolayer zinc oxide

Highlights: • Synthesis of planer ZnO nanostructure. • Observation of multilayered and monolayer ZnO. • DFT calculation of (10-10), (11-20) and (0 0 0 1) planes of ZnO. • Stability of non-polar (10-10) and (11-20) planes of ZnO. - Abstract: This letter reports the observations of planar two-dimensional ZnO synthesized using the hydrothermal growth technique. High-resolution transmission electron microscopy revealed the formation of a two-dimensional honeycomb lattice and aggregated structures of layered ZnO. The nonpolar (10-10) and (11-20) planes were present in the X-ray diffraction patterns, but the characteristic (0 0 0 1) peak of bulk ZnO was absent. The study found that nonpolar freestanding ZnO structures composed of a single or few layers may be more stable and may have a higher probability of formation than their polar counterparts. The stability of the nonpolar two-dimensional hexagonal ZnO slabs is supported by density functional theory studies.

36 MATERIALS SCIENCE↗

Electric and dielectric properties of Bi-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Pure and Bi-doped Bi{sub x}CaCu{sub 3}Ti{sub 4}O{sub 12+1.5x} (BCCTO, x=0, 0.15, 0.25, and 0.3) ceramics were fabricated by the solid-state sintering method. The results indicate that the additional bismuth has a great influence on both the microstructures and the electric properties. A new phase (Bi{sub 4}Ti{sub 3}O{sub 12}) can be observed in the doped samples from the x-ray diffraction patterns. Additionally, the CCTO gain size can be controlled by bismuth content. All of the BCCTO samples show high dielectric permittivity ({approx}10{sup 4} at 10{sup 3} Hz) and varistor effect, and the relaxation peak shifts to higher frequency. The resistance rises with the increase in bismuth, and the activation energy at the grain boundary is reduced from 0.65 to 0.47 eV.

36 MATERIALS SCIENCE↗

Modification of surface functionality and interlayer spacing of multi-walled carbon nanotubes using {gamma}-rays

The surface functionality and interlayer spacing changes induced by {gamma}-ray irradiation were investigated in multi-walled carbon nanotubes (MWCNTs). The modification effect of MWCNTs irradiated in air and epoxy chloropropane (ECP) was characterized by x-ray photoelectron spectroscopy, Raman spectroscopy, and x-ray diffraction. The results indicated that {gamma}-ray irradiation in two different media improved the amount of oxygen-containing functional groups on nanotube surface, and the irradiation in ECP was more efficient. Compared with the pristine MWCNTs, the MWCNTs irradiated in air exhibited a decrease in width of G band and intensity ratio of D to G band in the Raman spectra and an increase in intensity and diffraction angle of (002) characteristic x-ray peak. However, the MWCNTs tended to show the opposite behaviors in Raman spectra and x-ray diffraction patterns after they were irradiated in ECP. This preliminary study suggests that {gamma}-ray irradiation in air can meaningfully decrease the interlayer distance of MWCNTs and improve the graphitization of MWCNTs, while irradiation in ECP disorders and breaks the structure of MWCNTs. It is worth expecting that MWCNTs can be functionalized by {gamma}-rays in reactive liquid and also be employed for preventing {gamma}-ray radiation from reaching sensitive materials at least for short term experiments in air.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of porous structured ZnO thin film for dye sensitized solar cell applications

Zinc oxide (ZnO) and zinc oxide/eosin yellow (ZnO/EY) thin films were potentiostatically deposited onto fluorine doped tin oxide (FTO) glass substrate. Effect of eosin yellow dye on structural, morphological and optical properties was studied. X-ray diffraction patterns, micro Raman spectra and photoluminescence (PL) spectra reveal hexagonal wurtzite structure with less atomic defects in 101 plane orientation of the ZnO/EY film. Scanning electron microscopy (SEM) images show flower for ZnO and porous like structure for ZnO/EY thin film, respectively. DSSC was constructed and evaluated by measuring the current density verses voltage curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulsed laser deposition nickel oxide on crystalline silicon as hole selective contacts

In this work, the authors report the use of pulsed laser deposition to fabricate nickel oxide layers on silicon and assess the applicability of this structure as a hole selective contact. Films were deposited at temperatures of 300, 500, 700, and 900 °C. Results from reflective high energy electron diffraction patterns indicate increasing crystallinity with temperature up to 500 °C. However, layers deposited at 900 °C are amorphous. Nevertheless, results from atomic force microscopy, contact resistance measurements, and photoluminescence lifetime imaging indicate that films deposited at 900 °C have the best film smoothness, lowest specific contact resistivity, and highest lifetimes, and therefore, they are best suited for hole selective contact applications. Kelvin probe force microscopy and x-ray photoelectron spectroscopy were also carried out to study the effects of deposition temperature.

42 ENGINEERING↗