Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON INTERACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Electron spin-interaction effects on the ponderomotive magnetization and radiation in degenerate quantum plasmas

The spin interaction effects on the Karpman-Washimi ponderomotive magnetization are investigated in quantum plasmas. The induced Karpman-Washimi magnetization and cyclotron frequency due to the ponderomotive interaction are obtained as functions of the electron quantum wave length, Fermi wave number, wave frequency, and wave number. It is found that the spin interaction correction significantly enhances the Karpman-Washimi magnetization. It is also found the Karpman-Washimi magnetization increases with increasing Fermi wave number. In addition, it is found that the spin correction effect strongly enhances the radiation spectrum. It would be expected that the Karpman-Washimi interaction can be a possible terahertz radiation mechanism in a quantum plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Platinum Monolayer on IrFe Core-Shell Nanoparticle Electrocatalysts for the Oxygen Reduction Reaction

We synthesized high activity and stability platinum monolayer on IrFe core-shell nanoparticle electrocatalysts. Carbon-supported IrFe core-shell nanoparticles were synthesized by chemical reduction and subsequent thermal annealing. The formation of Ir shells on IrFe solid-solution alloy cores has been verified by scanning transmission electron microscopy coupled with energy-loss spectroscopy (EELS) and in situ X-ray absorption spectroscopy. The Pt monolayers were deposited on IrFe core-shell nanoparticles by galvanic replacement of underpotentially deposited Cu adatoms on the Ir shell surfaces. The specific and Pt mass activities for the ORR on the Pt monolayer on IrFe core-shell nanoparticle electrocatalyst are 0.46 mA/cm{sup 2} and 1.1 A/mg{sub Pt}, which are much higher than those on a commercial Pt/C electrocatalyst. High durability of Pt{sub ML}/IrFe/C has also been demonstrated by potential cycling tests. These high activity and durability observed can be ascribed to the structural and electronic interaction between the Pt monolayer and the IrFe core-shell nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic electron acceleration by oblique whistler waves

Test-particle simulations of electrons interacting with finite-amplitude, obliquely propagating whistler waves are carried out in order to investigate the acceleration of relativistic electrons by these waves. According to the present findings, an efficient acceleration of relativistic electrons requires a narrow range of oblique propagation angles, close to the whistler resonance cone angle, when the wave amplitude is held constant at relatively low value. For a constant wave propagation angle, it is found that a range of oblique whistler wave amplitudes permits the acceleration of relativistic electrons to O(MeV) energies. An initial distribution of test electrons is shown to form a power-law distribution when plotted in energy space. It is also found that the acceleration is largely uniform in electron pitch-angle space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagrammatic Monte Carlo Approach to Real‐frequency Response Functions and the Spin‐Fermion Model of Hot Spots (Final Report)

This three‐year research project was focused on two outstanding condensed matter problems (i) Real‐frequency response functions in Coulomb systems at finite temperature, and Fermi surface (FS) reconstruction in the Spin-Fermion (SF) model. The uniform electron gas (jellium) model, describing electrons interacting via long‐range Coulomb forces on positive neutralizing background, is fundamentally important both for understanding the physics of correlated electrons and for formulation of the time‐dependent density functional theory (TDDFT). The spin-fermion model has found a wide range of applications in the physics of cuprates and iron‐based superconductors to explain the “strange metal" behavior and to suggest a possible pairing mechanism for high‐temperature superconductivity. The project’s goals were development and application of the Diagrammatic Monte Carlo (DiagMC) techniques for solving the above problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pellet interaction with runaway electrons

We describe results from recent experiments studying interaction of solid polystyrene pellets with a runaway electron current channel generated after cryogenic argon pellet rapid shutdown of DIII-D. Fast camera imaging shows the pellet trajectory and continuum emission from the subsequent explosion, with geometric calibration providing detailed explosion analysis and runaway energy. Electron cyclotron emission also occurs, associated with knock-on electrons broken free from the pellet by RE which then accelerate and runaway, and also with a short lived hot plasma blown off the pellet surface. In addition, we compare heating and explosion times from observations and a model of pellet heating and breakdown by runaway interaction. (C) 2011 Elsevier B.V. All rights reserved

43 PARTICLE ACCELERATORS↗

Nano-engineered electron–hole exchange interaction controls exciton dynamics in core–shell semiconductor nanocrystals

A strong electron–hole exchange interaction (EI) in semiconductor nanocrystals (NCs) gives rise to a large (up to tens of meV) splitting between optically active (‘bright’) and optically passive (‘dark’) excitons. This dark–bright splitting has a significant effect on the optical properties of band-edge excitons and leads to a pronounced temperature and magnetic field dependence of radiative decay. Here we demonstrate a nanoengineering-based approach that provides control over EI while maintaining nearly constant emission energy. We show that the dark– bright splitting can be widely tuned by controlling the electron–hole spatial overlap in core– shell CdSe/CdS NCs with a variable shell width. In thick-shell samples, the EI energy reduces to <250µeV, which yields a material that emits with a nearly constant rate over temperatures from 1.5 to 300K and magnetic fields up to 7T. The EI-manipulation strategies demonstrated here are general and can be applied to other nanostructures with variable electron–hole overlap.

14 SOLAR ENERGY↗

Anisotropic Two-Dimensional Disordered Wigner Solid

The interplay between the Fermi sea anisotropy, electron-electron interaction, and localization phenomena can give rise to exotic many-body phases. An exciting example is an anisotropic two-dimensional (2D) Wigner solid (WS), where electrons form an ordered array with an anisotropic lattice structure. Such a state has eluded experiments up to now as its realization is extremely demanding: First, a WS entails very low densities where the Coulomb interaction dominates over the kinetic (Fermi) energy. Attaining such low densities while keeping the disorder low is very challenging. Second, the low-density requirement has to be fulfilled in a material that hosts an anisotropic Fermi sea. Here, we report transport measurements in a clean (low-disorder) 2D electron system with anisotropic effective mass and Fermi sea. The data reveal that at extremely low electron densities, when the r s parameter, the ratio of the Coulomb to the Fermi energy, exceeds ≃ 38, the current-voltage characteristics become strongly nonlinear at small dc biases. Several key features of the nonlinear characteristics, including their anisotropic voltage thresholds, are consistent with the formation of a disordered, anisotropic WS pinned by the ubiquitous disorder potential.

42 ENGINEERING↗

Numerically exact full counting statistics of the nonequilibrium Anderson impurity model

The time-dependent full counting statistics of charge transport through an interacting quantum junction is evaluated from its generating function, controllably computed with the inchworm Monte Carlo method. Exact noninteracting results are reproduced; then, we continue to explore the effect of electron-electron interactions on the time-dependent charge cumulants, first-passage time distributions, and n-electron transfer distributions. We observe a crossover in the noise from Coulomb blockade to Kondo-dominated physics as the temperature is decreased. In addition, we uncover long-tailed spin distributions in the Kondo regime and analyze queuing behavior caused by correlations between single-electron transfer events

36 MATERIALS SCIENCE↗

Radiation Protection Around High-intensity Laser Interactions with Solid Targets

Interaction of a high-intensity optical laser with a solid target can generate an ionizing radiation hazard in the form of high-energy "hot" electrons and bremsstrahlung, resulting from hot electrons interacting with the target itself and the surrounding target chamber. Previous studies have characterized the bremsstrahlung dose yields generated by such interactions for lasers in the range of 10 17 to 10 22 W cm -2 using particle-in-cell code EPOCH and Monte Carlo code FLUKA. Electron measurements based on a depth-dose approach are presented for two laser intensities, which indicate a Maxwellian distribution is more suitable for estimating the hot electrons' energy distribution. Also, transmission factors for the resulting bremsstrahlung for common shielding materials are calculated with FLUKA, and shielding tenth-value-layer thicknesses are also derived. In combination with the bremsstrahlung dose yield, the tenth-value layers provide radiation protection programs the means to evaluate radiation hazards and design shielding for high-intensity laser facilities.

61 RADIATION PROTECTION AND DOSIMETRY↗

Spectral Quadrature method for accurate O ( N ) electronic structure calculations of metals and insulators

We present the Clenshaw–Curtis Spectral Quadrature (SQ) method for real-space O(N) Density Functional Theory (DFT) calculations. In this approach, all quantities of interest are expressed as bilinear forms or sums over bilinear forms, which are then approximated by spatially localized Clenshaw–Curtis quadrature rules. This technique is identically applicable to both insulating and metallic systems, and in conjunction with local reformulation of the electrostatics, enables the O(N) evaluation of the electronic density, energy, and atomic forces. The SQ approach also permits infinite-cell calculations without recourse to Brillouin zone integration or large supercells. We employ a finite difference representation in order to exploit the locality of electronic interactions in real space, enable systematic convergence, and facilitate large-scale parallel implementation. In particular, we derive expressions for the electronic density, total energy, and atomic forces that can be evaluated in O(N) operations. We demonstrate the systematic convergence of energies and forces with respect to quadrature order as well as truncation radius to the exact diagonalization result. In addition, we show convergence with respect to mesh size to established O(N 3 ) planewave results. In conclusion, we establish the efficiency of the proposed approach for high temperature calculations and discuss its particular suitability for large-scale parallel computation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Is solid copper oxalate a spin chain or a mixture of entangled spin pairs?

Macroscopic assemblies of interacting spins give rise to a broad spectrum of behaviors determined by the spatial arrangement of the magnetic sites and the electronic interactions between them. Compounds of copper (II), in which each copper carries spin 1/2, exhibit a vast variety of physical properties. For antiferromagnetically coupled spin sites, there are two limiting scenarios: spin chains in which the spins can exhibit a long-range order or a mixture of dimers in which the spins within each pair are entangled but do not communicate with the spins from other dimers. In principle, the two types can be distinguished on the basis of experimental observations and modeling using empirically parameterized effective Hamiltonians, but in practice, ambiguity may persist for decades, as is the case for copper oxalate. Here we use high-level ab initio calculations to establish the validity of the nearest-site Heisenberg model and to predict the interaction strength between the magnetic sites. Finally, the computed magnetic susceptibility provides an unambiguous interpretation of magnetic experiments performed throughout half a century, clearly supporting the infinite spin-chain behavior of solid copper oxalate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHGNet as a pretrained universal neural network potential for charge-informed atomistic modelling

Large-scale simulations with complex electron interactions remain one of the greatest challenges for atomistic modelling. Although classical force fields often fail to describe the coupling between electronic states and ionic rearrangements, the more accurate ab initio molecular dynamics suffers from computational complexity that prevents long-time and large-scale simulations, which are essential to study technologically relevant phenomena. Here we present the Crystal Hamiltonian Graph Neural Network (CHGNet), a graph neural network-based machine-learning interatomic potential (MLIP) that models the universal potential energy surface. CHGNet is pretrained on the energies, forces, stresses and magnetic moments from the Materials Project Trajectory Dataset, which consists of over 10 years of density functional theory calculations of more than 1.5 million inorganic structures. The explicit inclusion of magnetic moments enables CHGNet to learn and accurately represent the orbital occupancy of electrons, enhancing its capability to describe both atomic and electronic degrees of freedom. We demonstrate several applications of CHGNet in solid-state materials, including charge-informed molecular dynamics in Li x MnO 2 , the finite temperature phase diagram for Li x FePO 4 and Li diffusion in garnet conductors. We highlight the significance of charge information for capturing appropriate chemistry and provide insights into ionic systems with additional electronic degrees of freedom that cannot be observed by previous MLIPs.

36 MATERIALS SCIENCE↗

Role of composition and structure on the properties of metal/multifunctional ceramic interfaces

The formation of intermetallic secondary phases, such as Pt{sub 3}Pb, has been observed experimentally at PbTiO{sub 3}/Pt and Pb(Zr,Ti)O{sub 3}/Pt, or PZT/Pt, interfaces. Density functional theory calculations are used here to calculate the work of adhesion of these interfacial systems with and without the secondary intermetallic phase. The charge density maps of the interfaces reveal the electronic interactions at the interface and the impact of the secondary phase. In addition, Bader charge analysis provides a quantitative assessment of electron transfer from the perovskites to the Pt. Analysis of the band diagrams indicates an increase of the potential barrier associated with electron transfer due to the formation of the Pt{sub 3}Pb at PZT/Pt interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interaction matrix element fluctuations in quantum dots

In the Coulomb blockade regime of a ballistic quantum dot, the distribution of conductance peak spacings is well known to be incorrectly predicted by a single-particle picture; instead, matrix element fluctuations of the residual electronic interaction need to be taken into account. In the normalized random-wave model, valid in the semiclassical limit where the number of electrons in the dot becomes large, we obtain analytic expressions for the fluctuations of two-body and one-body matrix elements. However, these fluctuations may be too small to explain low-temperature experimental data. We have examined matrix element fluctuations in realistic chaotic geometries, and shown that at energies of experimental interest these fluctuations generically exceed by a factor of about 3-4 the predictions of the random wave model. Even larger fluctuations occur in geometries with a mixed chaotic-regular phase space. These results may allow for much better agreement between the Hartree-Fock picture and experiment. Among other findings, we show that the distribution of interaction matrix elements is strongly non-Gaussian in the parameter range of experimental interest, even in the random wave model. We also find that the enhanced fluctuations in realistic geometries cannot be computed using a leading-order semiclassical approach, but may be understood in terms of short-time dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advances and Challenges of SCAN and r 2 SCAN Density Functionals in Transition‐Metal Compounds

ABSTRACT Transition‐metal compounds (TMCs) with open‐shell d ‐electrons are characterized by a complex interplay of lattice, charge, orbital, and spin degrees of freedom, giving rise to various fascinating applications. Often exhibiting exotic properties, these compounds are commonly classified as correlated systems due to strong inter‐electronic interactions called Hubbard U . This inherent complexity presents significant challenges to Kohn‐Sham density functional theory (KS‐DFT), the most widely used electronic structure method in condensed matter physics and materials science. While KS‐DFT is, in principle, exact for the ground‐state total energy, its exchange‐correlation energy must be approximated in practice. The mean‐field nature of KS implementations, combined with the limitations of current exchange‐correlation density functional approximations, has led to the perception that DFT is inadequate for correlated systems, particularly TMCs. Consequently, a common workaround involves augmenting DFT with an on‐site Hubbard‐like U correction. In recent years, the strongly constrained and appropriately normed (SCAN) density functional, along with its refined variant r 2 SCAN, has achieved remarkable progress in accurately describing the structural, energetic, electronic, magnetic, and vibrational properties of TMCs, challenging the traditional perception of DFT's limitations. This review explores the design principles of SCAN and r 2 SCAN, highlights their key advancements in studying TMCs, explains the mechanisms driving these improvements, and addresses the remaining challenges in this evolving field.

Zhang, Yubo [Minjiang Collaborative Center for The↗

Imaging emergent heavy Dirac fermions of a topological Kondo insulator

The interplay between strong electron interactions and band topology is a new frontier in the search for exotic quantum phases. The Kondo insulator SmB 6 has emerged as a promising platform because its correlation-driven bulk gap is predicted to host topological surface modes entangled with f electrons, spawning heavy Dirac fermions. Unlike the conventional surface states of non-interacting topological insulators, heavy Dirac fermions are expected to harbour spontaneously generated quantum anomalous Hall states, non-Abelian quantum statistics, fractionalization and topological order. Yet, the small energy scales required to probe heavy Dirac fermions have complicated their experimental realization. Here we use high-energy-resolution spectroscopic imaging in real and momentum space on SmB 6 . On cooling below 35 K, we observe the opening of an insulating gap that expands to 14 meV at 2 K. Within the gap, we image the formation of linearly dispersing surface states with effective masses reaching 410 ± 20 m e (where me is the mass of the electron). Our findings demonstrate the presence of correlation-driven heavy surface states in SmB 6 , in agreement with theoretical predictions. Their high effective mass translates to a large density of states near zero energy, which magnifies their susceptibility to the anticipated novel orders and their potential utility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extending quantum-mechanical benchmark accuracy to biological ligand-pocket interactions

Predicting the binding affinity of ligands to protein pockets is key in the drug design pipeline. The flexibility of ligand-pocket motifs arises from a range of attractive and repulsive electronic interactions during binding. Accurately accounting for all interactions requires robust quantum-mechanical (QM) benchmarks, which are scarce for ligand-pocket systems. Additionally, disagreement between “gold standard” Coupled Cluster (CC) and Quantum Monte Carlo (QMC) methods casts doubt on many benchmarks for larger non-covalent systems. We introduce the “QUantum Interacting Dimer” (QUID) benchmark framework containing 170 non-covalent (non-)equilibrium systems modeling chemically and structurally diverse ligand-pocket motifs. Symmetry-adapted perturbation theory shows that QUID broadly covers non-covalent binding motifs and energetic contributions. Robust binding energies are obtained using complementary CC and QMC methods, achieving agreement of 0.5 kcal/mol. The benchmark data analysis reveals that several dispersion-inclusive density functional approximations provide accurate energy predictions, though their atomic van der Waals forces differ in magnitude and orientation. Contrarily, semiempirical methods and empirical force fields require improvements in capturing non-covalent interactions (NCIs) for out-of-equilibrium geometries. The wide span of NCIs, highly accurate interaction energies, and analysis of molecular properties take QUID beyond the “gold standard” for QM benchmarks of ligand-protein systems.

Puleva, Mirela [University of Luxembourg, Luxembou↗

Atomic-scale imaging and electronic structure determination of catalytic sites on Pd/Cu near surface alloys

Water-gas shift chemistry provides a useful method for producing hydrogen from coal; however, fuel cell applications demand that this hydrogen be free of impurities. Due to their unique properties, Pd/Cu alloys represent an import class of materials used for H purification membranes and also serve as the active metals in many heterogeneous catalysts. Little is known about how Pd and Cu interact electronically in these mixed systems and there is debate in the literature over the direction of charge transfer between the two species. This study used the differential conductance (dI/dV) spectroscopy capabilities of a low-temperature scanning tunneling microscope (STM) to investigate the atomic-scale electronic structure of Pd/Cu surface alloys. dI/dV spectroscopy gives a direct measure of the local density of states of surface sites with subnanometer precision. Results from this work demonstrate that individual, isolated Pd atoms in a Cu lattice are almost electronically identical to their host atoms. Over an energy range that spans 1 eV on either side of the Fermi level, the only significant electronic difference between isolated Pd and their host Cu atoms is that Pd atoms have a very slightly depleted electron density in the region of the Cu surface state maximum.

01 COAL, LIGNITE, AND PEAT↗