SEARCH · Search NASA

Results for “FORESTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Future climate doubles the risk of hydraulic failure in a wet tropical forest

Summary Future climate presents conflicting implications for forest biomass. We evaluate how plant hydraulic traits, elevated CO 2 levels, warming, and changes in precipitation affect forest primary productivity, evapotranspiration, and the risk of hydraulic failure. We used a dynamic vegetation model with plant hydrodynamics (FATES‐HYDRO) to simulate the stand‐level responses to future climate changes in a wet tropical forest in Barro Colorado Island, Panama. We calibrated the model by selecting plant trait assemblages that performed well against observations. These assemblages were run with temperature and precipitation changes for two greenhouse gas emission scenarios (2086–2100: SSP2‐45, SSP5‐85) and two CO 2 levels (contemporary, anticipated). The risk of hydraulic failure is projected to increase from a contemporary rate of 5.7% to 10.1–11.3% under future climate scenarios, and, crucially, elevated CO 2 provided only slight amelioration. By contrast, elevated CO 2 mitigated GPP reductions. We attribute a greater variation in hydraulic failure risk to trait assemblages than to either CO 2 or climate. Our results project forests with both faster growth (through productivity increases) and higher mortality rates (through increasing rates of hydraulic failure) in the neo‐tropics accompanied by certain trait plant assemblages becoming nonviable.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Soil Chamber Fluxes (CO2 and CH4) across a catena in the Luquillo Experimental Forest, Puerto Rico

Wet tropical forest soils contribute significantly to global emissions of carbon dioxide (CO2) and methane (CH4). Landscape topography largely influences the rate of CO2 versus CH4 emissions from wet tropical forest soils. This dataset contains soil chamber fluxes of CO2 and CH4 from 2016 (April 5 through July 18) across a catena in the Luquillo Experimental Forest, Puerto Rico. Soil CO2 fluxes followed the trend of ridge>slope>valley. However, soil CH4 emissions followed the opposite trend, where valley soils served as the major source of CH4 emissions. This dataset can improve our understanding of greenhouse gas (CO2 and CH4) emissions associated with complex topography in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Data for Regier et al. (2025), "Short-term experimental flooding impacts soil biogeochemistry but not aboveground vegetation in a coastal forest"

Rising sea levels and intensifying storms increase flooding pressure on coastal forests, but the mechanisms that drive coastal forest mortality remain unclear. This study used an ecosystem-scale manipulation (TEMPEST, Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments) to simulate hurricane-level flooding of a coastal forest and explore the individual and interactive impacts of inundation and salinity. This dataset comprises the results reported by Regier et al. (2025) in their paper "Short-term experimental flooding impacts soil biogeochemistry but not aboveground vegetation in a coastal forest." It consists of measurements of:- Belowground conductance- Soil dissolved oxygen and redox- Soil and tree greenhouse gas fluxes- Leaf photosynthesis, stomatal conductance, and intercellular carbon dioxide- Sap flux- Soil volumetric water content and electrical conductivityAll files are plain-text CSV (comma separated value) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2017

Modeling the temporal dynamics of nonstructural carbohydrate pools in forest trees

Trees store carbohydrates, in the form of sugars and starch, as reserves to be used to power both future growth as well as to support day-to-day metabolic functions. These reserves are particularly important in the context of how trees cope with disturbance and stress—for example, as related to pest outbreaks, wind or ice damage, and extreme climate events. In this project, we measured the size of carbon reserves in forest trees, and determined how quickly these reserves are used and replaced—i.e., their “turnover time”. Our work was conducted at Harvard Forest, a temperate deciduous forest in central Massachusetts. Through field sampling, laboratory-based chemical analyses, and allometric modeling, we scaled these measurements up to whole-tree NSC budgets. We used these data to test and improve computer simulation models of carbon flow through forest ecosystems. Our modeling focused on the mathematical representation of these stored carbon reserves, and we examined the sensitivity of model performance to different model structures. This project contributes to DOE’s goal to improve next-generation models of the earth system, and to understand the impacts of climate change on terrestrial ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2018

Waste to Wisdom: Utilizing Forest Residues for the Production of Bioenergy and Biobased Products

The Waste to Wisdom project was part of the Biomass Research and Development Initiative (BRDI) and funded by the Department of Energy (DE-EE0006297) at an amount of $5.8 million. Our interdisciplinary research team, consisting of academics, business professionals, and land managers, worked together for about four years (September 2013 to December 2017) to: 1) conduct field-based experiments to develop innovative tools and systems that improve the economics, accessibility, and production of quality feedstocks from forest residues, 2) develop and test stand-alone in-woods or near-the forest biomass conversion technologies (BCTs) for the production of biochar, torrefied wood, and briquettes, and 3) perform analyses to evaluate the economic feasibility of commercial deployment of BCTs and to quantify the life cycle economic and environmental benefits of utilizing forest residues with BCTs for the production of bioenergy and bioproducts. The research papers presented in this Special Issue cover key aspects of the research efforts and findings made by the project team. We encourage the audience to visit the project web site (http://wastetowisdom.com/) to learn more about the team’s research on feedstock development, biomass conversion technologies, and the financial and environmental benefits of utilizing forest residues for production of bioenergy and biobased products.

09 BIOMASS FUELS↗

DOE OSTI2013

Empirical and process-based approaches to climate-induced forest mortality models

Globally, forests store ~45% of carbon sequestered terrestrially, contribute more to the terrestrial sink per area than any other land cover type, and assimilate an important portion of anthropogenic emissions. Forests exert strong biophysical control on climate via surface energy balance, and the hydrological cycle. Widespread forest mortality in response to drought, increased temperatures, and infestation of tree pests has been observed globally, potentially threatening forests' regulation of climate. This threat has prompted great interest in understanding and predicting tree mortality due to climate variability and change, especially drought. Initial tests of hydraulic failure (mortality caused by irreversible loss of xylem conductivity from air embolism), carbon starvation (mortality due to carbohydrate limitation), insect attacks, wildfire, and their interdependence, suggest proximal causes of mortality are likely complex, co-occurring, interrelated, and variable with tree species. While the interdependent roles of carbon and water in plant mortality are consistently observed, this work is continuously prompting new questions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Lifecycle Assessment and Techno-Economic Analysis of Biochar Pellet Production from Forest Residues and Field Application

Biochar produced from low-value forest biomass can provide substantial benefits to ecosystems and mitigate climate change-induced risks such as forest fires. Forest residues from restoration activities and timber harvest and biochar itself are bulky and thus incur high logistic costs, so are considered major bottlenecks for the commercialization of the biochar industry. The objectives of this study were to assess the environmental footprints and techno-economic feasibility of converting forest residues in Pacific Northwest United States into biochar pellets using portable systems followed by delivery of the final product to end-users for land application (dispersion). Two portable systems (Biochar Solutions Incorporated (BSI) and Air Curtain Burner (ACB)) were considered for biochar production. A cradle-to-grave lifecycle assessment (LCA) and a discounted cash flow analysis method were used to quantify the environmental impacts and minimum selling price (MSP) of biochar. The global warming (GW) impact of biochar production through BSI and ACB was estimated to be 306–444, and 750–1016 kgCO₂eq/tonne biochar applied to the field, respectively. The MSP of biochar produced through BSI and ACB was 1674–1909 and 528–1051 USD/tonne biochar applied to the field, respectively. Pelletizing of biochar reduced GW impacts during outbound logistics (~8–20%) but increased emissions during pelletizing (~1–9%). Results show the BSI system was a more viable option in terms of GW impact, whereas the ACB system can produce biochar with lower MSP. The results of the study conclude that the production of biochar pellets through the two portable systems and applied to fields can be both an environmentally beneficial and economically viable option.

09 BIOMASS FUELS↗

NASA NTRS1994

(abstract) Characterization of Tree Water Status and Dielectric Constant Changes of North American Boreal Forests in Combination with Synthetic Aperture Radar Remote Sensing

The occurrence and magnitude of temporal and spatial tree water status changes in the boreal environment were studied in a floodplain forest in Alaska and in four forest types of Central Canada. Under limited water supply conditions from the rooted soil zone in early spring (freeze/thaw transition) and during summer, trees show declining water potentials. Coincidental change in tree water potential, tree transpiration and tree dielectric constant had been observed in previous studies performed in Mediterranean ecotones. If radar is sensitive to chances in tree water status as reflected through changes in dielectric constant, then radar remote sensing could be used to monitor the water status of forests. The SAR imagery is examined to determine the response of the radar backscatter to the ground based observations of the water status of forest canopies. Comparisons are made between stands and also along the large North-South gradient between sites. Data from SAR are used to examine the radar response to canopy physiological state as related to vegetation freeze/thaw and growing season length.

remote sensing imaging↗

NASA NTRS1993

(abstract) Monitoring Seasonal Change in Taiga Forests Using ERS-1 SAR Data

Sensitivity of radar backscatter to the dielectric and geometric character of forested regions suggests significant changes in backscatter are expected with season due to freezing temperatures, snow, wind, leaf fall, and drought. The first European Remote Sensing Satellite, ERS-1, offers a unique opportunity to monitor a complete seasonal cycle for the Alaskan taiga forest ecosystem with synthetic aperture radar. During the 3-day repeat Commissioning Phase of ERS-1, from August 1991to December 1991, ERS-1 SAR data were collected in the region of Manley Hot Springs, Alaska, along the Tanana River, west of Fairbanks. In parallel with the SAR data collection, meteorological data from three weather stations positioned in three forest stands were collected continuously along with in situ measurements of the dielectric and moisture properties of the canopy and of ground cover which were collected during each overflight. The in situ data were collected in floodplain forest stands dominated by balsam poplar, white spruce, and black spruce. These results from the Commissioning Phase as well as preliminary results from the 35-day Repeat Phase will be presented.

characteristics geometric characteristics moisture↗

NASA NTRS2014

Deciphering the Precision of Stereo IKONOS Canopy Height Models for U.S. Forests with G-LiHT Airborne LiDAR

Few studies have evaluated the precision of IKONOS stereo data for measuring forest canopy height. The high cost of airborne light detection and ranging (LiDAR) data collection for large area studies and the present lack of a spaceborne instrument lead to the need to explore other low cost options. The US Government currently has access to a large archive of commercial high-resolution imagery, which could be quite valuable to forest structure studies. At 1 m resolution, we here compared canopy height models (CHMs) and height data derived from Goddard's airborne LiDAR Hyper-spectral and Thermal Imager (G-LiHT) with three types of IKONOS stereo derived digital surface models (DSMs) that estimate CHMs by subtracting National Elevation Data (NED) digital terrain models (DTMs). We found the following in three different forested regions of the US after excluding heterogeneous and disturbed forest samples: (1) G-LiHT DTMs were highly correlated with NED DTMs with R (sup 2) greater than 0.98 and root mean square errors (RMSEs) less than 2.96 m; (2) when using one visually identifiable ground control point (GCP) from NED, G-LiHT DSMs and IKONOS DSMs had R (sup 2) greater than 0.84 and RMSEs of 2.7 to 4.1 m; and (3) one GCP CHMs for two study sites had R (sup 2) greater than 0.7 and RMSEs of 2.6 to 3 m where data were collected less than four years apart. Our results suggest that IKONOS stereo data are a useful LiDAR alternative where high-quality DTMs are available.

IKONOS↗

NASA NTRS2018

The Impacts of Recent Drought on Fire, Forest Loss, and Regional Smoke Emissions in Lowland Bolivia

In the southern Amazon relationships have been established among drought, human activities that cause forest loss, fire, and smoke emissions. We explore the impacts of recent drought on fire, forest loss, and atmospheric visibility in lowland Bolivia. To assess human influence on fire, we consider climate, fire, and vegetation dynamics in an area largely excluded from human activities since 1979, Noel Kempff Mercado National Park (NK) in northeastern Bolivia. We use data from five sources: the Moderate Resolution Imaging Spectroradiometer Collection 6 active fire product (2001-2015) (MODIS C6), Global Fire Weather Database (GFWED) data (1982-2015), MODIS land cover data (2001-2010), MODIS forest loss data (2000-2012), and the regional extinction coefficient for the southwestern Amazon (i.e., B(sub ext)), which is derived from horizontal visibility data from surface stations at the World Meteorological Organization (WMO) level (1973-2015). The B(sub ext) is affected by smoke and acts as a proxy for visibility and regional fire emissions. In lowland Bolivia from 2001 to 2015, interannual Drought Code (DC) variability was linked to fire activity, while from 1982 to 2015, interannual DC variability was linked to B(sub ext). From 2001 to 2015, the B(sub ext) and MODIS C6 active fire data for lowland Bolivia captured fire seasonality, and covaried between low- and high-fire years. Consistent with previous studies, our results suggest B(sub ext)t can be used as a longer-term proxy of regional fire emissions in southwestern Amazonia. Overall, our study found drought conditions were the dominant control on interannual fire variability in lowland Bolivia, and fires within NK were limited to the Cerrado and seasonally inundated wetland biomes. Our results suggest lowland Bolivian tropical forests were susceptible to human activities that may have amplified fire during drought. Human activities and drought need to be considered in future projections of southern Amazonian fire, in regard to carbon emissions and global climate.

Forest Loss↗

NASA NTRS2019

On Promoting the Use of Lidar Systems in Forest Ecosystem Research

Forest structure is an important driver of ecosystem dynamics, including the exchange of carbon, water and energy between canopies and the atmosphere. Structural descriptors are also used in numerous studies of eco-logical processes and ecosystem services. Over the last 20+ years, lidar technology has fundamentally changed the way we observe and describe forest structure, and it will continue to impact the ways in which we investigate and monitor the relations between forest structure and functions. Here we present the currently available lidar system types (ground, air, and space-based), we highlight opportunities and challenges associated with each system, as well as challenges associated with a wider use of lidar technology and wider availability of lidar derived products. We also suggest pathways for lidar to further contribute to addressing questions in forest ecosystem science and increase benefits to a wider community of researchers.

Lidar systems↗

NASA NTRS2021

Large-Scale High-Resolution Coastal Mangrove Forests Mapping Across West Africa With Machine Learning Ensemble and Satellite Big Data

Coastal mangrove forests provide important ecosystem goods and services, including carbon sequestration, biodiversity conservation, and hazard mitigation. However, they are being destroyed at an alarming rate by human activities. To characterize mangrove forest changes, evaluate their impacts, and support relevant protection and restoration decision making, accurate and up-to-date mangrove extent mapping at large spatial scales is essential. Available large-scale mangrove extent data products use a single machine learning method commonly with 30 m Landsat imagery, and significant inconsistencies remain among these data products. With huge amounts of satellite data involved and the heterogeneity of land surface characteristics across large geographic areas, finding the most suitable method for large-scale high-resolution mangrove mapping is a challenge. The objective of this study is to evaluate the performance of a machine learning ensemble for mangrove forest mapping at 20 m spatial resolution across West Africa using Sentinel-2 (optical) and Sentinel-1 (radar) imagery. The machine learning ensemble integrates three commonly used machine learning methods in land cover and land use mapping, including Random Forest (RF), Gradient Boosting Machine (GBM), and Neural Network (NN). The cloud-based big geospatial data processing platform Google Earth Engine (GEE) was used for pre-processing Sentinel-2 and Sentinel-1 data. Extensive validation has demonstrated that the machine learning ensemble can generate mangrove extent maps at high accuracies for all study regions in West Africa (92%–99% Producer’s Accuracy, 98%–100% User’s Accuracy, 95%–99% Overall Accuracy). This is the first-time that mangrove extent has been mapped at a 20 m spatial resolution across West Africa. The machine learning ensemble has the potential to be applied to other regions of the world and is therefore capable of producing high-resolution mangrove extent maps at global scales periodically.

coastal environment↗

NASA NTRSDate not supplied

Vegetation Heights for Landsat Land Cover Classes in the Interior Boreal Forest Region of Alaska

Accurate determination and mapping of vegetation height is a prerequisite for regional estimations of above ground biomass, carbon pool dynamics, and improved modeling of future climate-vegetation-soil interactions. This study combined land cover class maps (at 30-m pixel resolution) derived from Landsat image bands with canopy vegetation heights detected at 1-m resolution from NASA G-LiHT Lidar flights, both from the year 2014 for the Middle Tanana Valley near Fairbanks, Alaska. The statistical distributions and structural attributes from Lidar plant heights were derived and refined for all Landsat vegetation classes. Results showed that the tallest cover classes in this region were deciduous forests (dominated by birch and aspen), followed by evergreen spruce and wooded wetlands. Open shrubland and herbaceous cover areas were determined to be 2 - 5 m shorter, on average, than these boreal forest stands. Tall shrubland cover areas were slightly shorter than most spruce-dominated evergreen forest areas. Nearly 60% of all low shrubland and herbaceous wetland pixels were detected with at least one tree crown greater than 10 m tall. This was in contrast to evergreen and deciduous forest classes that showed 88% of stands with at least one tree crown greater than 10 m tall.

Vegetation↗

NASA NTRS2020

Forest Potential Productivity Mapping by Linking Remote-Sensing-Derived Metrics to Site Variables

A fine-resolution region-wide map of forest site productivity is an essential need for effective large-scale forestry planning and management. In this study, we incorporated Sentinel-2 satellite data into an increment-based measure of forest productivity (biomass growth index (BGI)) derived from climate, lithology, soils, and topographic metrics to map improved BGI (iBGI) in parts of North American Acadian regions. Initially, several Sentinel-2 variables including nine single spectral bands and 12 spectral vegetation indices (SVIs) were used in combination with forest management variables to predict tree volume/ha and height using Random Forest. The results showed a 10–12 % increase in out of bag (OOB) r2when Sentinel-2 variables were included in the prediction of both volume and height together with BGI. Later, selected Sentinel-2 variables were used for biomass growth prediction in Maine, USA and New Brunswick, Canada using data from 7738 provincial permanent sample plots. The Sentinel-2 red-edge position (S2REP) index was identified as the most important variable over others to have known influence on site productivity. While a slight improvement in the iBGI accuracy occurred compared to the base BGI model (~2%), substantial changes to coefficients of other variables were evident and some site variables became less important when S2REP was included.

site productivity↗

DOE OSTI2016

Forest Resources

Forest biomass is an abundant biomass feedstock that complements the conventional forest use of wood for paper and wood materials. It may be utilized for bioenergy production, such as heat and electricity, as well as for biofuels and a variety of bioproducts, such as industrial chemicals, textiles, and other renewable materials. The resources within the 2016 Billion-Ton Report include primary forest resources, which are taken directly from timberland-only forests, removed from the land, and taken to the roadside.

Forest Resources Factsheet↗

DOE OSTI2017

Sapling growth rates reveal conspecific negative density dependence in a temperate forest

Local tree species diversity is maintained in part by conspecific negative density dependence (CNDD). This pervasive mechanism occurs in a variety of forms and ecosystems, but research to date has been heavily skewed toward tree seedling survival in tropical forests. To evaluate CNDD more broadly, we investigated how sapling growth rates were affected by conspecific adult neighbors in a fully mapped 25.6 ha temperate deciduous forest. We examined growth rates as a function of the local adult tree neighborhood (via spatial autoregressive modeling) and compared the spatial positioning of faster-growing and slower-growing saplings with respect to adult conspecific and heterospecific trees (via bivariate point pattern analysis). In addition, to determine whether CNDD-driven variation in growth rates leaves a corresponding spatial signal, we extended our point pattern analysis to a static, growth-independent comparison of saplings and the next larger size class. We found that negative conspecific effects on sapling growth were most prevalent. Five of the nine species that were sufficiently abundant for analysis exhibited CNDD, while only one species showed evidence of a positive conspecific effect, and one or two species, depending on the analysis, displayed heterospecific effects. There was general agreement between the autoregressive models and the point pattern analyses based on sapling growth rates, but point pattern analyses based on single-point-in-time size classes yielded results that differed markedly from the other two approaches. Our work adds to the growing body of evidence that CNDD is an important force in temperate forests, and demonstrates that this process extends to sapling growth rates. Further, our findings indicate that point pattern analyses based solely on size classes may fail to detect the process of interest (e.g., neighborhood-driven variation in growth rates), in part due to the confounding of tree size and age.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Phosphorus sorption and its environmental predictors across pantropical forest soils sampled over the past decade

Tropical forest productivity is frequently constrained by soil phosphorus (P) availability, yet global Land Surface Model (LSM), which are used to simulate ecosystem processes, still represent P cycling in tropical regions only in a limited way, largely because of scarce observational data. Phosphorus adsorption and desorption of dissolved inorganic P to and from soil minerals (hereafter termed sorption), is an important process for predicting how much P is available to plants. This dataset was created to improve predictions of soil P sorption in tropical soils by identifying the isotherm equation that best describes pantropical soils. It includes raw measurements of environmental variables, such as soil properties and climate, together with P sorption data collected from 40 forest soil pits from 9 Forest Global Earth Observatory (ForestGEO) sites across 7 tropical countries during 2018-2022. The data are organized by site, country, and continent. Each site may include several soil pits. For each pit, P sorption was measured across a range of soil P concentrations to build sorption isotherm curves, typically with about 6 to 8 measurements per curve. While sorbed P varies across these concentration levels, the other environmental variables remain constant at the plot level.

Aluminum oxide↗