Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Tuning Sugarcane Bagasse Biochar into a Potential Carbon Black Substitute for Polyethylene Composites

One of the most used carbonaceous materials by industry are carbon blacks, which have technological applications in polymeric composites, coatings and paints, electric and electrochemical devices. One drawback is that they are produced from fossil fuels. Although biochars are also carbonaceous materials some disadvantages like their larger particles size, high ash content and highly oxygenated surface must be overcome to enable their use as substitute of carbon blacks in composites. Sugarcane bagasse biochar was used to produce carbonaceous materials to substitute carbon blacks. Milling of biochar decreased particle size from several hundreds of micrometers to 100–500 nm and narrowed its size distribution. Chemical leaching reduced the inorganic compounds and ash content by almost 20%. Great advance was achieved when biochar was thermally annealed in alcohol vapor atmosphere which resulted in biochar-based material with very low oxygenated carbon species at particles surface and turned them hydrophobic. Almost no C–O/C=O and O–C=O peaks components were observed at the X-ray photoelectron spectroscopy spectrum. Reactive thermal annealing of the biochar based additive was a key procedure to obtain polyethylene composites (5% loading) with mechanical, thermal and colorimetric properties very close to the ones prepared with the carbon black from fossil fuels.

36 MATERIALS SCIENCE↗

Growth Rates of Global Energy Systems and Future Outlooks

The world is interconnected and powered by a number of global energy systems using fossil, nuclear, or renewable energy. This study reviews historical time series of energy production and growth for various energy sources. It compiles a theoretical and empirical foundation for understanding the behaviour underlying global energy systems' growth. The most extreme growth rates are found in fossil fuels. The presence of scaling behaviour, i.e. proportionality between growth rate and size, is established. The findings are used to investigate the consistency of several long-range scenarios expecting rapid growth for future energy systems. The validity of such projections is questioned, based on past experience. Finally, it is found that even if new energy systems undergo a rapid 'oil boom'-development-i.e. they mimic the most extreme historical events-their contribution to global energy supply by 2050 will be marginal.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Optimal control of anthropogenic carbon dioxide emissions through technological options: a modeling study

The anthropogenic emission of carbon dioxide (CO{sub 2}) is the prime culprit for the menace of global warming. To achieve the goal of mitigation of global warming, it is crucial to curb the anthropogenic carbon dioxide emissions. The prime anthropogenic source of CO{sub 2} is fossil fuel burning. In this paper, we propose a nonlinear mathematical model to study the impact of technological options, used for the reduction of CO{sub 2} emissions from fossil fuel burning and industrial processes, on the control of atmospheric CO{sub 2}. In the modeling process, it is assumed that the technological options are implemented to curb the CO{sub 2} emissions from the source at a rate proportional to the anthropogenic CO{sub 2} emissions. Model analysis reveals that the atmospheric level of CO{sub 2} can be effectively reduced by increasing the implementation rate of technological options and their efficiency. The strategies which optimally reduce atmospheric CO{sub 2} levels while minimizing the cost associated with the implementation of technological options are identified using optimal control theory. Numerical simulation has been carried out to illustrate theoretical results.

54 ENVIRONMENTAL SCIENCES↗

Biocatalysts: Beautiful creatures

Highlights: Black-Right-Pointing-Pointer Enzymes are vital tools. Black-Right-Pointing-Pointer Bifunctional enzymes. Black-Right-Pointing-Pointer Peculiar biocatalysts. -- Abstract: The chemical industry has come under increasing pressure to make chemical production more eco-friendly and independent to fossil resources. The development of industrial processes based on micro-organisms can especially help to eliminate the use or the generation of hazardous substances and can support the transition from dependence on fossil resources towards real sustainable and eco-safety industrial processes. The biocatalysts are the best solution given by nature that can be used to improve some biotechnological applications. In this research review, we report some peculiar properties of biocatalysts, implicated in a range of metabolic pathways and biotechnological tools.

60 APPLIED LIFE SCIENCES↗

Integrated solar thermochemical reaction system for steam methane reforming

Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heat exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.

03 NATURAL GAS↗

Life cycle impact assessment of artisanal sandstone mining on the environment and health of mine workers

Highlights: • Life cycle assessment (LCA) of artisanal sandstone mining in South Africa • Impact assessment of sandstone mining activities on environment and health • Fossil fuel and coal generated electricity are major non-renewable energy sources • Diesel fuel combustion during transportation phase contributed to major emissions • Silicosis and musculoskeletal problems are most common health issues - Abstract: Artisanal and small scale mining (ASM) is considered as a means to support and improve the quality of rural life, and is often the only activity that local communities have to sustain themselves. It is important to understand the nature of ASM and associated environmental effects in order to make informed decisions on the management, licensing and policy formulation of the ASM sector. Compared to other mined commodities such as, gold or diamond, the studies focusing on environmental and health impacts of sandstone mining are limited. This study used life cycle assessment (LCA) tool to evaluate the overall impact of artisanal sandstone mining (ASAM) on the environment and human health. The impact categories assessed in the study included: resource depletion, global warming, ozone layer depletion and acidification. It was observed that the impact of ASAM on the environment was minimal, however the high physical demand of the work negatively affected the health of the miners. The most common health related issues with the miners was observed to be silicosis and musculoskeletal problems. Fossil fuel used during transportation was observed to be the highest contributor for most of the impact categories.

54 ENVIRONMENTAL SCIENCES↗

Separation of CO2 from flue gas using electrochemical cells

Past research with high temperature molten carbonate electrochemical cells has shown that carbon dioxide can be separated from flue gas streams produced by pulverized coal combustion for power generation. However, the presence of trace contaminants, i.e., sulfur dioxide and nitric oxides, will impact the electrolyte within the cell. If a lower temperature cell could be devised that would utilize the benefits of commercially-available, upstream desulfurization and denitrification in the power plant, then this CO2 separation technique can approach more viability in the carbon sequestration area. Recent work has led to the assembly and successful operation of a low temperature electrochemical cell. In the proof-of-concept testing with this cell, an anion exchange membrane was sandwiched between gas-diffusion electrodes consisting of nickel-based anode electrocatalysts on carbon paper. When a potential was applied across the cell and a mixture of oxygen and carbon dioxide was flowed over the wetted electrolyte on the cathode side, a stream of CO2 to O2 was produced on the anode side, suggesting that carbonate/ bicarbonate ions are the CO2 carrier in the membrane. Since a mixture of CO2 and O2 is produced, the possibility exists to use this stream in oxy-firing of additional fuel. From this research, a novel concept for efficiently producing a carbon dioxide rich effluent from combustion of a fossil fuel was proposed. Carbon dioxide and oxygen are captured from the flue gas of a fossilfuel combustor by one or more electrochemical cells or cell stacks. The separated stream is then transferred to an oxy-fired combustor which uses the gas stream for ancillary combustion, ultimately resulting in an effluent rich in carbon dioxide. A portion of the resulting flow produced by the oxy-fired combustor may be continuously recycled back into the oxy-fired combustor for temperature control and an optimal carbon dioxide rich effluent

Keywords: Carbon dioxide sequestration Carbon capt↗

Combustion-Assisted CO2 Capture Using MECC Membranes

Mixed Electron and Carbonate ion Conductor (MECC) membranes have been proposed as a means to separate CO2 from power plant flue gas. Here a modified MECC CO2 capture process is analyzed that supplements retentate pressurization and permeate evacuation as a means to create a CO2 driving force with a process assisted by the catalytic combustion of syngas on the permeate side of the membrane. The combustion reactions consume transported oxygen, making it unavailable for the backwards transport reaction. With this change, the MECC capture system becomes exothermic, and steam for electricity production may be generated from the waste heat. Greater than 90% of the CO2 in the flue gas may be captured, and a compressed CO2 product stream is produced. A fossil-fueled power plant using this process would consume 14% more fuel per unit electricity produced than a power plant with no CO2 capture system, and has the potential to meet U.S. DOE s goal that deployment of a CO2 capture system at a fossil-fueled power plant should not increase the cost of electricity from the combined facility by more than 30%.

20 FOSSIL-FUELED POWER PLANTS↗

Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25-207 kg CO{sub 2}-eq t{sup -1} rw. Within all process stages, the emission of fossil CO{sub 2} from the combustion of MSW was the main contributor (111-254 kg CO{sub 2}-eq t{sup -1} rw), while the substitution of electricity reduced the GHG emissions by 150-247 kg CO{sub 2}-eq t{sup -1} rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.

54 ENVIRONMENTAL SCIENCES↗

Nuclear Energy and the Environment

A renewed global interest in nuclear power is underway due to concerns about the contribution of combustion of fossil fuels to climate change and the unreliability of the supply of fossil fuels. Nuclear power is currently an important source of carbon-free, safe, and domestic energy in many countries. However, concerns about nuclear waste disposal and the proliferation of nuclear weapons have hindered its expanded use and continued development. As world demand for energy continues to rise, it is recognized that nuclear energy will be required to meet this demand in an environmentally sustainable manner. Responsible management of nuclear wastes, more efficient processes for conversion of uranium to energy, and effective and secure techniques for recycling used nuclear fuel are some of the key issues which must be addressed in order to develop sustainable nuclear energy technologies for the 21st century. This book is based on the papers presented at a recent and very successful symposium entitled Nuclear Energy and the Environment held at the 238th American Chemical Society (ACS) National Meeting in Washington, DC, August 16-20, 2009. The 3-day ACS symposium was well attended with participants from Canada, France, Germany, Japan, Sweden, Taiwan, and the USA discussing research ideas and progress in separation of actinides and fission products, green separation techniques, radiation effects, and repository chemistry. This book starts with an overview of challenges in actinide separation chemistry for advanced nuclear fuel cycles and roadmaps of new cleanup technologies by the U.S. Department of Energy. It is followed by 3 sections covering recent research and development in separations chemistry, radiation chemistry, and repository chemistry. The book documents reasons to be optimistic for the future of nuclear power and challenges facing nuclear scientists and engineers today.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Rapid growth in CO2 emissions after the 2008-2009 global financial crisis

Global carbon dioxide emissions from fossil-fuel combustion and cement production grew 5.9% in 2010, surpassed 9 Pg of carbon (Pg C) for the first time, and more than offset the 1.4% decrease in 2009. The impact of the 2008 2009 global financial crisis (GFC) on emissions has been short-lived owing to strong emissions growth in emerging economies, a return to emissions growth in developed economies, and an increase in the fossil-fuel intensity of the world economy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Misrepresentation of the IPCC CO2 emission scenarios

Estimates of recent fossil fuel CO2 emissions have been compared with the IPCC SRES (Special Report on Emission Scenarios) emission scenarios that had been developed for analysis of future climate change, impacts and mitigation. In some cases this comparison uses averages across subgroups of SRES scenarios and for one category of greenhouse gases (industrial sources of CO2). That approach can be misleading and cause confusion as it is inconsistent with many of the papers on future climate change projections that are based on a specific subset of closely scrutinized SRES scenarios, known as illustrative marker scenarios. Here, we show that comparison between recent estimates of fossil fuel emissions trends and the SRES illustrative marker scenarios leads to the conclusion that recent trends are not outside the SRES range. Furthermore, the recent economic downturn appears to have brought actual emission back toward the middle of the SRES illustrative marker scenarios. We also note that SRES emission scenarios are designed to reflect potential alternative long-term trends in a world without climate policy intervention and the trend in the resulting climate change is not sensitive to short-term fluctuations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hydrogen generation under visible light using nitrogen doped titania anodes

Hydrogen is among several energy sources that will be needed to replace the quickly diminishing fossil fuels. Free hydrogen is not available naturally on earth and the current processes require a fossil fuel, methane, to generate hydrogen. Electrochemical splitting of water on titania proposed by Fujishima suffers from low efficiency. The efficiency could be enhanced if full sun spectrum can be utilized. Using pulsed laser deposition technique we synthesized nitrogen doped titanium dioxide (TiO{sub 2-x}N{sub x}) thin films with improved visible light sensitivity. The photoactivity was found to be N concentration dependent. Hydrogen evolution was observed under visible light irradiation (wavelength > 390 nm) without the presence of any organic electron donor.

03 NATURAL GAS↗

Comparative study of microfacies variation in two samples from the Chittenango member, Marcellus shale subgroup, western New York state, USA

This study demonstrates the significant lithologic variations that occur within the two shale samples from the Chittenango member of the Marcellus shale formation from western New York State in terms of mineralogical composition, type of lamination, pyrite occurrences and fossil content using thin section detailed description and field emission Scanning electron microscope (FESEM) with energy dispersive X-Ray Spectrum (EDX). This study is classified samples as laminated clayshale and fossiliferous carbonaceous shale. The most important detrital constituents of these shales are the clay mineral illite and chlorite, quartz, organic matter, carbonate mineral, and pyrite. The laminated clayshale has a lower amount of quartz and carbonate minerals than fossiliferous carbonaceous shale while it has a higher amount of clay minerals (chlorite and illite) and organic matter. FESEM analysis confirms the presence of chlorite and illite. The fossil content in the laminated clayshale is much lower than the fossiliferous carbonaceous shale. This can provide greater insights about variations in the depositional and environmental factors that influenced its deposition. This result can be compiled with the sufficient data to be helpful for designing the horizontal wells and placement of hydraulic fracturing in shale gas exploration and production.

58 GEOSCIENCES↗

Economic carbon cycle feedbacks may offset additional warming from natural feedbacks

As the Earth warms, carbon sinks on land and in the ocean will weaken, thereby increasing the rate of warming. Although natural mechanisms contributing to this positive climate–carbon feedback have been evaluated using Earth system models, analogous feedbacks involving human activities have not been systematically quantified. Here we conceptualize and estimate the magnitude of several economic mechanisms that generate a carbon–climate feedback, using the Kaya identity to separate a net economic feedback into components associated with population, GDP, heating and cooling, and the carbon intensity of energy production and transportation. We find that climate-driven decreases in economic activity (GDP) may in turn decrease human energy use and thus fossil fuel CO 2 emissions. In a high radiative forcing scenario, such decreases in economic activity reduce fossil fuel emissions by 13% this century, lowering atmospheric CO 2 by over 100 ppm in 2100. The natural carbon–climate feedback, in contrast, increases atmospheric CO 2 over this period by a similar amount, and thus, the net effect including both feedbacks is nearly zero. Our work highlights the importance of improving the representation of climate–economic feedbacks in scenarios of future change. Although the effects of climate warming on the economy may offset weakening land and ocean carbon sinks, a loss of economic productivity will have high societal costs, potentially increasing wealth inequity and limiting resources available for effective adaptation.

54 ENVIRONMENTAL SCIENCES↗

Brilliant angle-independent structural colours preserved in weevil scales from the Swiss Pleistocene

Extant weevils exhibit a remarkable colour palette that ranges from muted monochromatic tones to rainbow-like iridescence, with the most vibrant colours produced by three-dimensional photonic nanostructures housed within cuticular scales. Although the optical properties of these nanostructures are well understood, their evolutionary history is not fully resolved, in part due to a poor knowledge of their fossil record. Here, we report three-dimensional photonic nanostructures preserved in brightly coloured scales of two weevils, belonging to the genus Phyllobius or Polydrusus , from the Pleistocene (16–10 ka) of Switzerland. The scales display vibrant blue, green and yellow hues that resemble those of extant Phyllobius/Polydrusus . Scanning electron microscopy and small-angle X-ray scattering analyses reveal that the subfossil scales possess a single-diamond photonic crystal nanostructure. In extant Phyllobius/Polydrusus , the near-angle-independent blue and green hues function primarily in crypsis. The preservation of far-field, angle-independent structural colours in the Swiss subfossil weevils and their likely function in substrate matching confirm the importance of investigating fossil and subfossil photonic nanostructures to understand the evolutionary origins and diversification of colours and associated behaviours (e.g. crypsis) in insects.

54 ENVIRONMENTAL SCIENCES↗

Synchrotron X-ray absorption spectroscopy of melanosomes in vertebrates and cephalopods: implications for the affinity of Tullimonstrum

Screening pigments are essential for vision in animals. Vertebrates use melanins bound in melanosomes as screening pigments, whereas cephalopods are assumed to use ommochromes. In this work, preserved eye melanosomes in the controversial fossil Tullimonstrum (Mazon Creek, IL, USA) are partitioned by size and/or shape into distinct layers. These layers resemble tissue-specific melanosome populations considered unique to the vertebrate eye. Here, we show that extant cephalopod eyes also show tissue-specific size- and/or shape-specific partitioning of melanosomes; these differ from vertebrate melanosomes in the relative abundance of trace metals and in the binding environment of copper. Chemical signatures of melanosomes in the eyes of Tullimonstrum more closely resemble those of modern cephalopods than those of vertebrates, suggesting that an invertebrate affinity for Tullimonstrum is plausible. Melanosome chemistry may thus provide insights into the phylogenetic affinities of enigmatic fossils where melanosome size and/or shape are equivocal.

59 BASIC BIOLOGICAL SCIENCES↗