SEARCH · Search NASA

Results for “Finite difference scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Application of direct solvers to unstructured meshes for the Euler and Navier-Stokes equations using upwind schemes

The application of Newton iteration to inviscid and viscous airfoil calculations on unstructured meshes is examined. A cell-centered finite volume scheme is employed on an unstructured mesh consisting of triangles. Roe's flux difference splitting scheme is used to compute the inviscid fluxes. Higher order accuracy is achieved by an interpolation procedure that makes use of auxiliary gradients. The efficient solution of the sparse linear system of equations which arises upon linearization in time is addressed. Results are presented for inviscid and viscous test cases. The complications which arise due to the introduction of nonlinear limiters are addressed.

Venkatakrishnan, V.↗

NASA NTRS1989

A simple algebraic grid adaptation scheme with applications to two- and three-dimensional flow problems

An algebraic adaptive grid scheme based on the concept of arc equidistribution is presented which provides high flowfield resolution when applied to two-dimensional and three-dimensional flow problems. The present scheme locally adjusts the grid density using gradients of selected flow variables from either finite difference or finite volume calculations, and it can specify user-prescribed grid stretching such that control of the grid spacing can be maintained in areas of known flowfield behavior. A robust and efficient grid smoothing technique has been incorporated into the adaptive grid routine.

Hsu, Andrew T.↗

NASA NTRS1994

Eulerian-Lagrangian Simulations of Transonic Flutter Instabilities

This paper presents an overview of recent applications of Eulerian-Lagrangian computational schemes in simulating transonic flutter instabilities. This approach, the fluid-structure system is treated as a single continuum dynamics problem, by switching from an Eulerian to a Lagrangian formulation at the fluid-structure boundary. This computational approach effectively eliminates the phase integration errors associated with previous methods, where the fluid and structure are integrated sequentially using different schemes. The formulation is based on Hamilton's Principle in mixed coordinates, and both finite volume and finite element discretization schemes are considered. Results from numerical simulations of transonic flutter instabilities are presented for isolated wings, thin panels, and turbomachinery blades. The results suggest that the method is capable of reproducing the energy exchange between the fluid and the structure with significantly less error than existing methods. Localized flutter modes and panel flutter modes involving traveling waves can also be simulated effectively with no a priori knowledge of the type of instability involved.

Bendiksen, Oddvar O.↗

DOE OSTI2017

An immersed boundary method for fluid–structure interaction with compressible multiphase flows

This paper presents a two-dimensional immersed boundary method for fluid–structure interaction with compressible multiphase flows involving large structure deformations. This method involves three important parts: flow solver, structure solver and fluid–structure interaction coupling. In the flow solver, the compressible multiphase Navier–Stokes equations for ideal gases are solved by a finite difference method based on a staggered Cartesian mesh, where a fifth-order accuracy Weighted Essentially Non-Oscillation (WENO) scheme is used to handle spatial discretization of the convective term, a fourth-order central difference scheme is employed to discretize the viscous term, the third-order TVD Runge–Kutta scheme is used to discretize the temporal term, and the level-set method is adopted to capture the multi-material interface. In this work, the structure considered is a geometrically non-linear beam which is solved by using a finite element method based on the absolute nodal coordinate formulation (ANCF). The fluid dynamics and the structure motion are coupled in a partitioned iterative manner with a feedback penalty immersed boundary method where the flow dynamics is defined on a fixed Lagrangian grid and the structure dynamics is described on a global coordinate. We perform several validation cases (including fluid over a cylinder, structure dynamics, flow induced vibration of a flexible plate, deformation of a flexible panel induced by shock waves in a shock tube, an inclined flexible plate in a hypersonic flow, and shock-induced collapse of a cylindrical helium cavity in the air), and compare the results with experimental and other numerical data. The present results agree well with the published data and the current experiment. Finally, we further demonstrate the versatility of the present method by applying it to a flexible plate interacting with multiphase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1984

Applications of a conservative zonal scheme to transient and geometrically complex problems

A conservative zoning technique, wherein the flow field for a finite-difference calculation is divided into several regions to simplify grid generation, is discussed and is applied in the solution of a two-dimensional problem of complex topology. Calculations are performed on two zonal, or patched, grid systems for the supersonic flow over a double-airfoil configuration. The solution is smooth and continuous across the zonal interfaces, and shock waves pass through the boundaries without distortion. In addition, the time-accuracy of the zonal-boundary method is verified by a two-zone cyclinder calculation with a stationary inner and a rotating outer mesh.The feasibility of the zonal approach for use in the solution of geometrically complex and unsteady problems is thus demonstrated.

Hessenius, K. A.↗

NASA NTRS1985

Finite difference methods for reducing numerical diffusion in TEACH-type calculations

A methodological evaluation for two-finite differencing schemes for computer-aided gas turbine design is presented. The two computational schemes include; a Bounded Skewed Finite Differencing Scheme (BSUDS); and a Quadratic Upwind Differencing Scheme (QSDS). In the evaluation, the derivations of the schemes were incorporated into two-dimensional and three-dimensional versions of the Teaching Axisymmetric Characteristics Heuristically (TEACH) computer code. Assessments were made according to performance criteria for the solution of problems of turbulent, laminar, and coannular turbulent flow. The specific performance criteria used in the evaluation were simplicity, accuracy, and computational economy. It is found that the BSUDS scheme performed better with respect to the criteria than the QUDS. Some of the reasons for the more successful performance BSUDS are discussed.

Syed, S. A.↗

NASA NTRS1986

Applications of a Conservative Zonal Scheme to Transient and Geometrically Complex Problems

A conservative zoning technique, wherein the flow field for a finite-difference calculation is divided into several regions to simplify grid generation, is discussed and is applied in the solution of a two-dimensional problem of complex topology. Calculations are performed on two zonal, or patched, grid systems for the supersonic flow over a double-airfoil configuration. The solution is smooth and continuous across the zonal interfaces, and shock waves pass through the boundaries without distortion. In addition, the time accuracy of the zonal boundary method is verified by a two-zone cylinder calculation with a stationary inner and a rotating outer mesh. The feasibility of the zonal approach for use in the solution of geometrically complex and unsteady problems is thus demonstrated.

Hessenius, Kristin A.↗

DOE OSTI2017

A compatible high-order meshless method for the Stokes equations with applications to suspension flows

A stable numerical solution of the steady Stokes problem requires compatibility between the choice of velocity and pressure approximation that has traditionally proven problematic for meshless methods. Here in this work, we present a discretization that couples a staggered scheme for pressure approximation with a divergence-free velocity reconstruction to obtain an adaptive, high-order, finite difference-like discretization that can be efficiently solved with conventional algebraic multigrid techniques. We use analytic benchmarks to demonstrate equal-order convergence for both velocity and pressure when solving problems with curvilinear geometries. In order to study problems in dense suspensions, we couple the solution for the flow to the equations of motion for freely suspended particles in an implicit monolithic scheme. The combination of high-order accuracy with fully-implicit schemes allows the accurate resolution of stiff lubrication forces directly from the solution of the Stokes problem without the need to introduce sub-grid lubrication models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1990

Dynamical approach study of spurious steady-state numerical solutions of nonlinear differential equations. Part 1: The ODE connection and its implications for algorithm development in computational fluid dynamics

Spurious stable as well as unstable steady state numerical solutions, spurious asymptotic numerical solutions of higher period, and even stable chaotic behavior can occur when finite difference methods are used to solve nonlinear differential equations (DE) numerically. The occurrence of spurious asymptotes is independent of whether the DE possesses a unique steady state or has additional periodic solutions and/or exhibits chaotic phenomena. The form of the nonlinear DEs and the type of numerical schemes are the determining factor. In addition, the occurrence of spurious steady states is not restricted to the time steps that are beyond the linearized stability limit of the scheme. In many instances, it can occur below the linearized stability limit. Therefore, it is essential for practitioners in computational sciences to be knowledgeable about the dynamical behavior of finite difference methods for nonlinear scalar DEs before the actual application of these methods to practical computations. It is also important to change the traditional way of thinking and practices when dealing with genuinely nonlinear problems. In the past, spurious asymptotes were observed in numerical computations but tended to be ignored because they all were assumed to lie beyond the linearized stability limits of the time step parameter delta t. As can be seen from the study, bifurcations to and from spurious asymptotic solutions and transitions to computational instability not only are highly scheme dependent and problem dependent, but also initial data and boundary condition dependent, and not limited to time steps that are beyond the linearized stability limit.

Yee, H. C.↗

NASA NTRS1991

Dynamical approach study of spurious steady-state numerical solutions of nonlinear differential equations. I - The dynamics of time discretization and its implications for algorithm development in computational fluid dynamics

Yee, H. C.↗

DOE OSTI2018

FELIX-2.0: New version of the finite element solver for the time dependent generator coordinate method with the Gaussian overlap approximation

The time-dependent generator coordinate method (TDGCM) is a powerful method to study the largeamplitude collective motion of quantum many-body systems such as atomic nuclei. Under the GaussianOverlap Approximation (GOA), the TDGCM leads to a local, time-dependent Schrödinger equation in amulti-dimensional collective space. In this paper, we present the version 2.0 of the code FELIX that solvesthe collective Schrödinger equation in a finite element basis. This new version features: (i) the ability tosolve a generalized TDGCM+GOA equation with a metric term in the collective Hamiltonian, (ii) supportfor new kinds of finite elements and different types of quadrature to compute the discretized Hamiltonianand overlap matrices, (iii) the possibility to leverage the spectral element scheme, (iv) an explicit Krylovapproximation of the time propagator for time integration instead of the implicit Crank–Nicolson methodimplemented in the first version, (v) an entirely redesigned workflow. We benchmark this release on ananalytic problem as well as on realistic two-dimensional calculations of the low-energy fission of240Puand256Fm. Low to moderate numerical precision calculations are most efficiently performed with simplexelements with a degree 2 polynomial basis. Higher precision calculations should instead use the spectralelement method with a degree 4 polynomial basis. We emphasize that in a realistic calculation of fissionmass distributions of240Pu, FELIX-2.0 is about 20 times faster than its previous release (within a numericalprecision of a few percents).

Regnier, D.↗

DOE OSTI2023

A finite element method for angular discretization of the radiation transport equation on spherical geodesic grids

Discrete ordinate (S N ) and filtered spherical harmonics (FP N ) based schemes have been proven to be robust and accurate in solving the Boltzmann transport equation but they have their own strengths and weaknesses in different physical scenarios. We present a new method based on a finite element approach in angle that combines the strengths of both methods and mitigates their disadvantages. The angular variables are specified on a spherical geodesic grid with functions on the sphere being represented using a finite element basis. A positivity-preserving limiting strategy is employed to prevent non-physical values from appearing in the solutions. Here, the resulting method is then compared with both S N and FP N schemes using four test problems and is found to perform well when one of the other methods fail.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1994

Pseudospectral collocation methods for fourth order differential equations

Collocation schemes are presented for solving linear fourth order differential equations in one and two dimensions. The variational formulation of the model fourth order problem is discretized by approximating the integrals by a Gaussian quadrature rule generalized to include the values of the derivative of the integrand at the boundary points. Collocation schemes are derived which are equivalent to this discrete variational problem. An efficient preconditioner based on a low-order finite difference approximation to the same differential operator is presented. The corresponding multidomain problem is also considered and interface conditions are derived. Pseudospectral approximations which are C1 continuous at the interfaces are used in each subdomain to approximate the solution. The approximations are also shown to be C3 continuous at the interfaces asymptotically. A complete analysis of the collocation scheme for the multidomain problem is provided. The extension of the method to the biharmonic equation in two dimensions is discussed and results are presented for a problem defined in a nonrectangular domain.

Malek, Alaeddin↗

DOE OSTI2021

Optimizing multigrid reduction-in-time and Parareal coarse-grid operators for linear advection

Parallel-in-time methods, such as multigrid reduction-in-time (MGRIT) and Parareal, provide an attractive option for increasing concurrency when simulating time-dependent partial differential equations (PDEs) in modern high-performance computing environments. While these techniques have been very successful for parabolic equations, it has often been observed that their performance suffers dramatically when applied to advection-dominated problems or purely hyperbolic PDEs using standard rediscretization approaches on coarse grids. In this paper, we apply MGRIT or Parareal to the constant-coefficient linear advection equation, appealing to existing convergence theory to provide insight into the typically nonscalable or even divergent behavior of these solvers for this problem. To overcome these failings, we replace rediscretization on coarse grids with improved coarse-grid operators that are computed by applying optimization techniques to approximately minimize error estimates from the convergence theory. Therefore, one of our main findings is that, in order to obtain fast convergence as for parabolic problems, coarse-grid operators should take into account the behavior of the hyperbolic problem by tracking the characteristic curves. Our approach is tested for schemes of various orders using explicit or implicit Runge–Kutta methods combined with upwind-finite-difference spatial discretizations. In all cases, we obtain scalable convergence in just a handful of iterations, with parallel tests also showing significant speed-ups over sequential time-stepping.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1975

ALARM: A highly efficient eigenvalue extraction routine for very large matrixes

A highly efficient computer program, called ALARM, for the determination of eigenvalues and eigenvectors of large symmetric matrices (over 10,000 degrees of freedom), was described. As such, it is highly useful for analyzing complex finite element and finite difference idealizations encountered in structural dynamics and acoustic probelms. The program is based upon a scheme which reduces a large matrix to an equivalent tridiagonal one of much smaller size. The main strength of the algorithm lies in its ability to retain all the information required to obtain the eigenvalues at either end of the original matrix spectrum.

Ojalvo, I. U.↗

NASA NTRS1989

The design and application of upwind schemes on unstructured meshes

Solution and mesh generation algorithms for solving the Euler equations on unstructured meshes consisting of triangle and quadrilateral control volumes are presented. Cell-centered and mesh-vertex upwind finite-volume schemes are developed which utilize multi-dimensional monotone linear reconstruction procedures. These algorithms differ from existing algorithms (even on structured meshes). Numerical results in two dimensions are presented.

Barth, Timothy J.↗

NASA NTRS1989

Numerical simulation of flow over a hypersonic aircraft using an explicit upwind PNS solver

A hypersonic flow field over a generic airplane configuration is simulated by solving the Parabolized Navier-Stokes (PNS) equations. The finite difference solution of the PNS equations is calculated using a noniterative space marching, explicit, upwind scheme recently developed by the authors. Special gridding techniques are used which allowed the sharp changes in surface geometry of the airplane configuration to be modelled without smoothing of corners. Comparisons of the PNS results to a solution of the Navier-Stokes equations demonstrates a good agreement of the numerical results in approximately 1/6 of the cpu time. This paper demonstrates that the explicit upwind algorithm for solving the PNS equations is an efficient method for simulating hypersonic flow fields about complete airplane configurations and should be considered as an alternative to solving the Navier-Stokes equations for flow fields where the PNS equations are valid.

Korte, John J.↗

NASA NTRS1992

CFD Simulations Of Sonic Booms In Near And Mid Fields

Report discusses computational fluid dynamics (CFD) to simulate generation and propagation of sonic booms in near- and mid-field regions of supersonic flows about simplified bodies representative of advanced airplanes. Parabolized Navier-Stokes equations integrated by implicit, approximate-factorization, finite-volume algorithm in which crossflow inviscid fluxes evaluated by Roe's flux-difference-splitting scheme. Near-field solutions obtained by applying algorithm to flows immediately surrounding bodies. Solutions transferred to computer codes based on Whitham"s F-function theory for extrapolation to far-field.

Cheung, Samson H.↗