Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

On-demand magnon resonance isolation in cavity magnonics

Cavity magnonics is a promising field focusing on the interaction between spin waves (magnons) and other types of signal. In cavity magnonics, isolation of magnons from the cavity to allow signal storage and processing fully in the magnonic domain is highly desired, but its realization is often hindered by the lack of necessary tunability of the interaction. This work shows that by using the collective mode of two yttrium iron garnet spheres and applying Floquet engineering, magnonic signals can be switched on demand to a magnon dark mode that is protected from the environment, enabling a variety of manipulation over the magnon dynamics. Furthermore, our demonstration can be scaled up to systems with an array of magnonic resonators, paving the way for large-scale programmable hybrid magnonic circuits.

42 ENGINEERING↗

Tuning Edge Localized Spin Waves in Magnetic Microstripes by Proximate Magnetic Structures.

The propagation of edge localized spin waves (E-SWs) in yttrium iron garnet (YIG; Y3Fe5O12) microstripes with and without magnetic microstructures in close proximity is investigated by micromagnetic simulations. A splitting of the dispersion curve with the presence of permalloy (Py; Ni81Fe19) stripe is observed. The results show that E-SWs on the two edges of YIG stripe have different wavelengths, group velocities, and decay lengths at the same frequencies. The role of the Py stripe was found to be the source of the inhomogeneous static dipolar field without dynamic coupling with YIG. This work opens new perspectives for the design of innovative spin wave interference-based logic devices.

Zhang, Zhizhi↗

Equation of state of a high-pressure phase of Gd 3 Ga 5 O 12

Gd 3 Ga 5 O 12 (GGG), which crystallizes in the garnet structure at ambient conditions, was observed to transform to a high-pressure phase at 88 GPa after laser heating at 1500 K. This new phase is stable at least up to 180 GPa, and can be preserved on decompression to 50 GPa. This phase is cubic and consistent with a perovskite structure of stoichiometry (Gd 0.75 Ga 0.25 )GaO 3 . The zero-pressure bulk modulus, K 0 , obtained from fitting to a Birch-Murnaghan equation of state is 373(5) GPa with a fixed pressure derivative K' 0 =4. At 170 GPa, the bulk modulus of perovskite-type GGG is 979(15) GPa, which is comparable to that of diamond at the same pressure [956(21) GPa] and consistent with recently reported shock-compression data for Gd 3 Ga 5 O 12 . The new high-pressure phase of Gd 3 Ga 5 O 12 is thus highly incompressible.

36 MATERIALS SCIENCE↗

Chiral charge pumping in graphene deposited on a magnetic insulator

Here, we demonstrate experimentally that a sizable chiral charge pumping can be achieved at room temperature in graphene/yttrium iron garnet (YIG) bilayer systems. The effect, which cannot be attributed to the ordinary spin pumping, reveals itself in the creation of a dc electric field/voltage in graphene as a response to the dynamic magnetic excitations (spin waves) in an adjacent out-of-plane magnetized YIG film. We show that the induced voltage changes its sign when the orientation of the static magnetization is reversed, clearly indicating the broken mirror reflection symmetry about the planes normal to the graphene/YIG interface. The strength of effect shows a nonmonotonous dependence on the spin-wave frequency, in agreement with the proposed theoretical model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of the spin-Seebeck effect at a topological-insulator/ferromagnetic-insulator interface

The spin-Seebeck effect refers to voltage signals induced in metals by thermally driven spin currents in adjacent magnetic systems. We present a theory of the spin-Seebeck signal in the case where the conductor that supports the voltage signal is the topologically protected two-dimensional surface-state system at the interface between a ferromagnetic insulator (FI) and a topological insulator (TI). Our theory uses a Dirac model for the TI surface states and assumes Heisenberg exchange coupling between the TI quasiparticles and the FI magnetization. The spin-Seebeck voltage is induced by the TI surface states scattering off the nonequilibrium magnon population at the surface of the semi-infinite thermally driven FI. Our theory is readily generalized to spin-Seebeck voltages in any two-dimensional conductor that is exchange-coupled to the surface of a FI. Surface-state carrier-density-dependent signal strengths calculated using Bi 2 Te 3 and yttrium iron garnet material parameters are consistent with recent experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for exotic short-range interactions using paramagnetic insulators

We describe a proposed experimental search for exotic spin-coupled interactions using a solid-state paramagnetic insulator. The experiment is sensitive to the net magnetization induced by the exotic interaction between the unpaired insulator electrons with a dense, nonmagnetic mass in close proximity. An existing experiment has been used to set limits on the electric dipole moment of the electron by probing the magnetization induced in a cryogenic gadolinium gallium garnet sample on application of a strong electric field. With suitable additions, including a movable source mass, this experiment can be used to explore “monopole-dipole” forces on polarized electrons with unique or unprecedented sensitivity. As a result, the solid-state, nonmagnetic construction, combined with the low-noise conditions and extremely sensitive magnetometry available at cryogenic temperatures could lead to a sensitivity over 10 orders of magnitude greater than exiting limits in the range below 1 mm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Length Scale of the Spin Seebeck Effect

We study the origin of the spin Seebeck effect in yttrium iron garnet (YIG) samples for film thicknesses from 20 nm to 50 μm at room temperature and 50 K. Our results exhibit a characteristic increase of the longitudinal spin Seebeck effect amplitude with the thickness of the insulating ferrimagnetic YIG, which levels off at a critical thickness that increases with decreasing temperature. The observed behavior cannot be explained as an interface effect or by variations of the material parameters. Comparison to numerical simulations of thermal magnonic spin currents yields qualitative agreement for the thickness dependence resulting from the finite magnon propagation length. This allows us to trace the origin of the observed signals to genuine bulk magnonic spin currents due to the spin Seebeck effect ruling out an interface origin and allowing us to gauge the reach of thermally excited magnons in this system for different temperatures. At low temperature, even quantitative agreement with the simulations is found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong Interlayer Magnon-Magnon Coupling in Magnetic Metal-Insulator Hybrid Nanostructures

We observe strong interlayer magnon-magnon coupling in an on-chip nanomagnonic device at room temperature. Ferromagnetic nanowire arrays are integrated on a 20-nm-thick yttrium iron garnet (YIG) thin film strip. Large anticrossing gaps up to 1.58 GHz are observed between the ferromagnetic resonance of the nanowires and the in-plane standing spin waves of the YIG film. Control experiments and simulations reveal that both the interlayer exchange coupling and the dynamical dipolar coupling contribute to the observed anticrossings. The coupling strength is tunable by the magnetic configuration, allowing the coherent control of magnonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of Magnon Polarons in a Uniaxial Antiferromagnetic Insulator

Magnon polarons, a type of hybridized excitations between magnons and phonons, were first reported in yttrium iron garnet as anomalies in the spin Seebeck effect responses. Here, we report an observation of antiferromagnetic (AFM) magnon polarons in a uniaxial AFM insulator Cr 2 O 3 . Despite the relatively higher energy of magnon than that of the acoustic phonons, near the spin-flop transition of ~ 6 T , the left-handed magnon spectrum shifts downward to hybridize with the acoustic phonons to form AFM magnon polarons, which can also be probed by the spin Seebeck effect. The spin Seebeck signal is founded to be enhanced due to the magnon polarons at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and basal twinning of topological insulator Bi 2 Se 3 grown by MBE onto crystalline Y 3 Fe 5 O 12

Whereas thin films of topological insulators grown by molecular beam epitaxy often display regular, triangular features, Bi 2 Se 3 films grown onto yttrium iron garnet (YIG) display much greater disorder. Here, we present observations of various types of disorder present in these films using atomic force microscopy and scanning transmission electron microscopy. Furthermore, the investigation reveals the presence of an amorphous metal oxide layer between the substrate and the film, which appears to smooth out the nanometer-scale undulations in the YIG surface. It also shows the existence of quasiordered arrays of heavy atoms in some interfacial regions, as well as rotations and tilting between adjacent grains and basal twinning at various heights in the film. Using density functional theory, we explore the impact of these prominent basal twins on the electronic structure of the film.

36 MATERIALS SCIENCE↗

Negligible magnetic losses at low temperatures in liquid phase epitaxy grown Y 3 Fe 5 O 12 films

Yttrium iron garnet (Y 3 Fe 5 O 12 ; YIG) has a unique combination of low magnetic damping, high spin-wave conductivity, and insulating properties that make it a highly attractive material for a variety of applications in the fields of magnetics and spintronics. While the room-temperature magnetization dynamics of YIG have been extensively studied, there are limited reports correlating the low-temperature magnetization dynamics to the material structure or growth method. Here, in this study, we investigate liquid phase epitaxy grown YIG films and their magnetization dynamics at temperatures down to 10 K. We show there is a negligible increase in the ferromagnetic resonance linewidth down to 10 K, which is unique when compared with YIG films grown by other deposition methods. From the broadband ferromagnetic resonance measurements, polarized neutron reflectivity, and scanning transmission electron microscopy, we conclude that these liquid phase epitaxy grown films have negligible rare-earth impurities present, specifically the suppression of Gd diffusion from the Gd 3 Ga 5 O 12 (GGG) substrate into the Y 3 Fe 5 O 12 film, and therefore negligible magnetic losses attributed to the slow-relaxation mechanism. Overall, liquid phase epitaxy YIG films have a YIG/GGG interface that is five times sharper and have ten times lower ferromagnetic resonance linewidths below 50 K than comparable YIG films by other deposition methods. Thus, liquid phase epitaxy grown YIG films are ideal for low-temperature experiments/applications that require low magnetic losses, such as quantum transduction and manipulation via magnon coupling.

36 MATERIALS SCIENCE↗

Unraveling the origin of antiferromagnetic coupling at YIG/permalloy interface

We investigate the structural and electronic origin of antiferromagnetic (AFM) coupling in the yttrium iron garnet (YIG) and permalloy (Ni 80 ⁢Fe 20 , Py) bilayer system at the atomic level. Ferromagnetic resonance (FMR) spectra reveal unique hybrid modes in samples prepared with surface ion milling, indicative of antiferromagnetic exchange coupling at the YIG/Py interface. Using atomic resolution scanning transmission electron microscopy (STEM), we found that AFM coupling appears at the YIG/Py interface of the tetrahedral YIG surface formed with ion milling. Here, the STEM measurements suggest that the interfacial AFM coupling is predominantly driven by an oxygen-mediated superexchange coupling mechanism, which is confirmed by the density-functional theory (DFT) calculations to be energetically favorable. Thus, the combined experimental and theoretical results reveal the critical role of interfacial atomic structure in determining the type of magnetic coupling in a YIG/ferromagnet heterostructure, and prove that the interfacial structure can be experimentally tuned by surface ion milling.

36 MATERIALS SCIENCE↗

Integrating ORNL’s HPC and Neutron Facilities with a Performance-Portable CPU/GPU Ecosystem

We explore the development of a performance-portable CPU/GPU ecosystem to integrate two of the US Department of Energy’s (DOE’s) largest scientific instruments, the Oak Ridge Leadership Computing facility and the Spallation Neutron Source (SNS), both of which are housed at Oak Ridge National Laboratory. We select a relevant data reduction workflow use-case to obtain the differential scattering cross-section from data collected by SNS’s CORELLI and TOPAZ instruments. We compare the current CPU-only production implementation using the Garnet Python multiprocess package based on the Mantid C++ framework against our proposed CPU/GPU implementation that uses the LLVM-based, just-in-time Julia scientific language and the JACC.jl performance-portable package. Two proxy apps were developed: (i) an app for extracting relevant Mantid kernels (MDNorm) in C++ and (ii) the Julia MiniVATES.jl miniapp. We present performance results for NVIDIA A100 and AMD MI100 GPUs and AMD EPYC 7513 and 7662 CPUs. The results provide insights for future generations of data reduction software that can embrace performance portability for an integrated research infrastructure across DOE’s experimental and computational facilities.

Hahn, Steven↗

A far‐red‐emitting (Gd,Y) 3 (Ga,Al) 5 O 12 :Mn 2+ ceramic phosphor with enhanced thermal stability for plant cultivation

Abstract As for plants, far‐red (FR) light with wavelength from 700 nm to 740 nm is critical for processes of photosynthesis and photomorphogenesis. Light‐controlled development depends on light to control cell differentiation, structural and functional changes, and finally converge into the formation of tissues and organs. Phosphor converted FR emission under LED excitation is a cost‐effective and high‐efficient way to provide artificial FR light source. With the aim to develop an efficient FR phosphor that can promote the plant growth, a series of gadolinium yttrium gallium garnet (GYGAG) transparent ceramic phosphors co‐doped with Mn 2+ and Si 4+ have been fabricated via chemical co‐precipitation method, followed sintered in O 2 and hot isostatic pressing in this work. Under UV excitation, the phosphor exhibited two bright and broadband red emission spectra due to Mn 2+ : 4 T 1 → 6 A 1 spin‐forbidden transition, and one of which located in the right FR region. And then, Ce 3+ ions were co‐doped as the activator to enhance the absorption at blue light region and the emission of Mn 2+ . It turns out that the emission band of GYGAG transparent ceramic phosphors matches well with the absorption band of phytochrome P FR , which means they are promising to be applied in plant cultivation light‐emitting diodes (LEDs) for modulating plant growth. Besides, the thermal stability of this material was investigated systematically, and an energy transferring model involves defects was also proposed to explain the phenomenon of abnormal temperature quenching.

Qiu, Xuting↗

High‐pressure phases in shock‐induced melt of the unique highly shocked LL 6 chondrite Northwest Africa 757

Abstract Northwest Africa 757 is unique in the LL chondrite group because of its abundant shock‐induced melt and high‐pressure minerals. Olivine fragments entrained in the melt transform partially and completely into ringwoodite. Plagioclase and Ca‐phosphate transform to maskelynite, lingunite, and tuite. Two distinct shock‐melt crystallization assemblages were studied by FIB ‐ TEM analysis. The first melt assemblage, which includes majoritic garnet, ringwoodite plus magnetite‐magnesiowüstite, crystallized at pressures of 20–25 GP a. The other melt assemblage, which consists of clinopyroxene and wadsleyite, solidified at ~15 GP a, suggesting a second veining event under lower pressure conditions. These shock features are similar to those in S6 L chondrites and indicate that NWA 757 experienced an intense impact event, comparable to the impact event that disrupted the L chondrite parent body at 470 Ma.

Hu, Jinping↗

Application of Abrasive-Waterjets for Machining Fatigue-Critical Aircraft Aluminum Parts

Current specifications require AWJ-cut aluminum parts for fatigue critical aerospace structures to go through subsequent processing due to concerns of degradation in fatigue performance. The requirement of secondary process for AWJ-machined parts greatly negates the cost effectiveness of waterjet technology. Some cost savings are envisioned if it can be shown that AWJ net cut parts have comparable durability properties as those conventionally machined. To revisit and upgrade the specifications for AWJ machining of aircraft aluminum, “Dog-bone” specimens, with and without secondary processes, were prepared for independent fatigue tests at Boeing and Pacific Northwest National Laboratory (PNNL). Test results show that the fatigue life is proportional to quality levels of machined edges or inversely proportional to the surface roughness Ra . Even at highest quality level, the average fatigue life of AWJ-machined parts is about 30% shorter than those of conventionally machined counterparts. Between two secondary processes, dry-grit blasting with aluminum oxide abrasives until the striation is removed visually yields excellent result. It actually prolongs the fatigue life of parts at least three times higher than that achievable with conventional machining. Dry-grit blasting is relatively simple and inexpensive to administrate and, equally important, alleviates the concerns of garnet embedment.

36 MATERIALS SCIENCE↗

Machining of Aircraft Titanium with Abrasive-Waterjets for Fatigue Critical Applications

Laboratory tests were conducted to determine the fatigue performance of AWJ-machined aircraft titanium. Dog-bone specimens machined with AWJs were prepared and tested with and without sanding and dry-grit blasting with Al2O3 as secondary processes. The secondary processes were applied to remove the visual appearance of AWJ-generated striations and to clean up the garnet embedment. The fatigue performance of AWJ-machined specimens was compared with baseline specimens machined with CNC milling. Fatigue test results not only confirmed the findings of the aluminum dog-bone specimens but also further enhance the fatigue performance. In addition, titanium is known to be notoriously difficult to cut with contact tools while AWJs cut it 34% faster than stainless steel. AWJ cutting and dry-grit blasting are shown to be a preferred combination for processing aircraft titanium that is fatigue critical.

aircraft↗