Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Effect of plasma parameters on characteristics of silicon nitride film deposited by single and dual frequency plasma enhanced chemical vapor deposition

This work investigates the deposition of hydrogenated amorphous silicon nitride films using various low-temperature plasmas. Utilizing radio-frequency (RF, 13.56 MHz) and ultra-high frequency (UHF, 320 MHz) powers, different plasma enhanced chemical vapor deposition processes are conducted in the mixture of reactive N{sub 2}/NH{sub 3}/SiH{sub 4} gases. The processes are extensively characterized using different plasma diagnostic tools to study their plasma and radical generation capabilities. A typical transition of the electron energy distribution function from single- to bi-Maxwellian type is achieved by combining RF and ultra-high powers. Data analysis revealed that the RF/UHF dual frequency power enhances the plasma surface heating and produces hot electron population with relatively low electron temperature and high plasma density. Using various film analysis methods, we have investigated the role of plasma parameters on the compositional, structural, and optical properties of the deposited films to optimize the process conditions. The presented results show that the dual frequency power is effective for enhancing dissociation and ionization of neutrals, which in turn helps in enabling high deposition rate and improving film properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultrahigh vacuum and low-temperature cleaning of oxide surfaces using a low-concentration ozone beam

We present a novel method of delivering a low-concentration (<15%) ozone beam to an ultra-high vacuum environment for the purpose of cleaning and dosing experimental samples through oxidation processing. The system described is safe, low-cost, and practical and overcomes the limitations of ozone transport in the molecular flow environment of high or ultrahigh vacuum whilst circumventing the use of pure ozone gas which is potentially highly explosive. The effectiveness of this method in removing surface contamination is demonstrated through comparison of high-temperature annealing of a simple oxide (MgO) in ozone and oxygen environments as monitored using quadrupole mass spectroscopy and Auger electron spectroscopy. Additionally, we demonstrate the potential of ozone for obtaining clean complex oxide surfaces without the need for high-temperature annealing which may significantly alter surface structure.

36 MATERIALS SCIENCE↗

Increasing the sampling efficiency of protein conformational transition using velocity-scaling optimized hybrid explicit/implicit solvent REMD simulation

The application of temperature replica exchange molecular dynamics (REMD) simulation on protein motion is limited by its huge requirement of computational resource, particularly when explicit solvent model is implemented. In the previous study, we developed a velocity-scaling optimized hybrid explicit/implicit solvent REMD method with the hope to reduce the temperature (replica) number on the premise of maintaining high sampling efficiency. In this study, we utilized this method to characterize and energetically identify the conformational transition pathway of a protein model, the N-terminal domain of calmodulin. In comparison to the standard explicit solvent REMD simulation, the hybrid REMD is much less computationally expensive but, meanwhile, gives accurate evaluation of the structural and thermodynamic properties of the conformational transition which are in well agreement with the standard REMD simulation. Therefore, the hybrid REMD could highly increase the computational efficiency and thus expand the application of REMD simulation to larger-size protein systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary study on applying the method of characteristics to pebble-bed HTR - 18637

Neutron transport in high temperature pebble-bed gas-cooled reactor, which is a promising generation IV reactor candidate with cylindrical core, graphite moderator and spherical TRISO coated particles fuel, is of great interest. However, the stochastic method namely Monte Carlo faces with tremendous simulation of particles and the conventional two-step method featured by homogenization only can give the scalar flux. In this paper, method of characteristics is trying to be applied to pebble bed reactor because of its advantages in arbitrary geometry and the ability to obtain solution in neutronically large domains. Some challenges occur when it comes to HTR. First, the amount of calculation and the memory requirement are huge due to the large quantities of spherical fuel and stochastic distribution of pebbles. Second, the arrangement of characteristics and ray tracing process is more complex comparing to LWR with cuboid geometry because the stochastic distribution of the spherical assemblies and the longer neutron mean free path in pebble bed HTR. Third, the treatment of the multiscale sphere fuel need be detail studied to determine the subdivision of flat source region. At present, preliminary research on this subject is undergoing. This paper is concentrated on the modeling of the pebble-bed reactor core by constructive solid geometry (CSG) which allows complex spatial models to be built using boolean operations, characteristics arrangement and the treatment of boundary condition. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermomechanical Processing for Improved Mechanical Properties of HT9 Steels

Thermomechanical processing (TMP) of ferritic–martensitic (FM) steels, such as HT9 (Fe–12Cr–1MoWV) steels, involves normalizing, quenching, and tempering to create a microstructure of fine ferritic/martensitic laths with carbide precipitates. HT9 steels are used in fast reactor core components due to their high-temperature strength and resistance to irradiation damage. However, traditional TMP methods for these steels often result in performance limitations under irradiation, including embrittlement at low temperatures (<~430 °C), insufficient strength and toughness at higher temperatures (>500 °C), and void swelling after high-dose irradiation (>200 dpa). This research aimed to enhance both fracture toughness and strength at high temperatures by creating a quenched and tempered martensitic structure with ultrafine laths and precipitates through rapid quenching and unconventional tempering. Mechanical testing revealed significant variations in strength and fracture toughness depending on the processing route, particularly the tempering conditions. Tailored TMP approaches, combining rapid quenching with limited tempering, elevated strength to levels comparable to nano-oxide strengthened ferritic alloys while preserving fracture toughness. For optimal properties in high-Cr steels for future reactor applications, this study recommends a modified tempering treatment, i.e., post-quench annealing at 500 °C or 600 °C for 1 h, possibly followed by a brief tempering at a slightly higher temperature.

36 MATERIALS SCIENCE↗

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗

Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles

Highly dispersible zinc oxide nanoparticles were produced in large quantity via a simple solution method. The effect of temperature and pH impact on as-prepared ZnO nanoparticles with respect to the morphological and optical characteristics has been investigated. The average particle size of ZnO nanoparticles increased with increasing annealing temperature. A sharp UV band-edge emission was observed in as-prepared ZnO nanoparticles with negligibly less intense deep level emission. However, upon annealing at high temperature in air, UV band-edge emission disappears with an evolution of a broad deep level emission in photoluminescence spectra. Similarly, by adjusting the pH of reaction medium from 4 to pH = 8 using ammonium hydroxide solution, particle size gets bigger and bigger leads to red-shift in UV band-edge emission and an appearance of deep level emission peak. At pH = 8, well resolved sharp X-ray diffraction peaks were observed with lower FWHM values due to higher crystallite sizes.

36 MATERIALS SCIENCE↗

From nGy to MGy - New dosimetry with LiF:Mg,Cu,P thermoluminescence detectors

One of the well known advantages of thermoluminescence (TL) detectors made of lithium fluoride doped with magnesium, copper and phosphorus (LiF:Mg,Cu,P) is their very high sensitivity to ionizing radiation. LiF:Mg,Cu,P detectors enable measurements of radiation doses from tens of nanograys up to a few kilograys, when the total saturation of the signal of the so-called main dosimetric peak occurs. Only recently, unprecedented high-temperature emission of LiF detectors heated to temperatures up to 600 Degree-Sign C, was observed after exposures to radiation doses ranging from 1 kGy to 1 MGy. For quantification of the glow-curve shape changes of LiF:Mg,Cu,P detectors in this range of doses and determination of the absorbed dose, the Ultra-High Temperature Ratio coefficient (UHTR) was defined. This newly established dosimetric method was tested in a range of radiation qualities, such as gamma radiation, electron and proton beams, thermal neutron fields and high-energy mixed fields around the SPS and PS accelerators at CERN. The new method for ultra-high dose range monitoring with a single LiF:Mg,Cu,P detector, which is capable of covering at least twelve orders of magnitude of doses, can be used for dosimetry at high energy accelerators, thermonuclear fusion technology facilities and has great potential for accident dosimetry in particular. A number of dosimetric sets with LiF:Mg,Cu,P detectors are currently installed around the LHC at CERN.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of the Cause of Low Blister Threshold Temperatures in the RERTR-12 and AFIP-4 Experiments

Blister–threshold testing of fuel plates is a standard method through which the safety margin for operation of plate-type in research and test reactors is assessed. The blister-threshold temperature is indicative of the ability of fuel to operate at high temperatures for short periods of time (transient conditions) without failure. This method of testing was applied to the newly developed U-Mo monolithic fuel system. Blister annealing studies on the U-Mo monolithic fuel plates began in 2007, with the Reduced Enrichment for Research and Test Reactors (RERTR)-6 experiment, and they have continued as the U-Mo fuel system has evolved through the research and development process. Blister anneal threshold temperatures from early irradiation experiments (RERTR-6 through RERTR-10) ranged from 400 to 500°C. These temperatures were projected to be acceptable for NRC-licensed research reactors and the high-power Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) based on current safety-analysis reports (SARs). Initial blister testing results from the RERTR-12 experiment capsules X1 and X2 showed a decrease in the blister-threshold temperatures. Blister threshold temperatures from this experiment ranged from 300 to 400°C. Selected plates from the AFIP-4 experiment, which was fabricated using a process similar to that used to fabricate the RERTR-12 experiment, also underwent blister testing to determine whether results would be similar. The measured blister-threshold temperatures from the AFIP-4 plates fell within the same blister-threshold temperature range measured in the RERTR-12 plates. Investigation of the cause of this decrease in bister threshold temperature is being conducted under the guidance of Idaho National Laboratory PLN-4155, “Analysis of Low Blister Threshold Temperatures in the RERTR-12 and AFIP-4 Experiments,” and is driven by hypotheses.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Centrosymmetric or Noncentrosymmetric? Transition Metals Talking in K 2 TGe 3 S 8 (T = Co, Fe)

Two new quaternary sulfides K 2 TGe 3 S 8 (T=Co, Fe) have been synthesized by a high-temperature solid-state routine and flux growth method. The crystal growth process of K 2 TGe 3 S 8 (T=Co, Fe) was elucidated by in-situ powder X-ray diffraction and DSC thermal analysis. The mm-sized crystals of K 2 TGe 3 S 8 (T=Co, Fe) were grown. K 2 CoGe 3 S 8 crystallizes in a new structure type in centrosymmetric space group P1¯ (No. 2) with unit cell parameters of a = 7.016(1) Å, b = 7.770(1)Å, c = 14.342(1) Å, α = 93.80(1)°, β = 92.65(1)°, γ = 114.04(1)°. K 2 FeGe 3 S 8 crystallizes in K 2 FeGe 3 Se 8 structure type and the noncentrosymmetric space group P2 1 (No. 4) with unit cell parameters of a = 7.1089(5)Å, b = 11.8823(8)Å, c = 16.7588(11)Å, β = 96.604(2)°. There is a high structural similarity between K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 . The larger volume coupled with higher degrees of distortion of [FeS 4 ] tetrahedra compared to [CoS 4 ] tetrahedra accounts for the structure’s shift from centrosymmetric to noncentrosymmetric. The theory simulation confirms that [TS 4 ]T= Co or Fe tetrahedra play a crucial role in controlling the structure and properties of K 2 TGe 3 S 8 (T = Co, Fe). The measured optical bandgaps of K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 are 2.1(1) eV and 2.6(1) eV respectively. K 2 FeGe 3 S 8 shows antiferromagnetic ordering at 24K while no magnetic ordering was detected in K 2 CoGe 3 S 8 . In conclusion, the magnetic measurements also demonstrate the divalent nature of transition metals in K 2 TGe 3 S 8 (T = Co, Fe).

36 MATERIALS SCIENCE↗

Monitoring microstructural evolution of alloy 617 with non-linear acoustics for remaining useful life prediction; multiaxial creep-fatigue and creep-ratcheting

The research built upon a prior investigation to develop a unified constitutive model for design-­by-­analysis of the intermediate heat exchanger (IHX) for a very high temperature reactor (VHTR) design of next generation nuclear plants (NGNPs). Model development requires a set of failure data from complex mechanical experiments to characterize the material behavior. Therefore uniaxial and multiaxial creep-­fatigue and creep-­ratcheting tests were conducted on the nickel-­base Alloy 617 at 850 and 950°C. The time dependence of material behavior, and the interaction of time dependent behavior (e.g., creep) with ratcheting, which is an increase in the cyclic mean strain under load-­controlled cycling, are major concerns for NGNP design. This research project aimed at characterizing the microstructure evolution mechanisms activated in Alloy 617 by mechanical loading and dwell times at elevated temperature. The acoustic harmonic generation method was researched for microstructural characterization. It is a nonlinear acoustics method with excellent potential for nondestructive evaluation, and even online continuous monitoring once high temperature sensors become available. It is unique because it has the ability to quantitatively characterize microstructural features well before macroscale defects (e.g., cracks) form. The nonlinear acoustics beta parameter was shown to correlate with microstructural evolution using a systematic approach to handle the complexity of multiaxial creep-­fatigue and creep-­ratcheting deformation. Mechanical testing was conducted to provide a full spectrum of data for: thermal aging, tensile creep, uniaxial fatigue, uniaxial creep-­fatigue, uniaxial creep-ratcheting, multiaxial creep-fatigue, and multiaxial creep-­ratcheting. Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), and Optical Microscopy were conducted to correlate the beta parameter with individual microstructure mechanisms. We researched application of the harmonic generation method to tubular mechanical test specimens and pipes for nondestructive evaluation. Tubular specimens and pipes act as waveguides, thus we applied the acoustic harmonic generation method to guided waves in both plates and shells. Magnetostrictive transducers were used to generate and receive guided wave modes in the shell sample and the received signals were processed to show the sensitivity of higher harmonic generation to microstructure evolution. Modeling was initiated to correlate higher harmonic generation with the microstructure that will lead to development of a life prediction model that is informed by the nonlinear acoustics measurements.

36 MATERIALS SCIENCE↗

Computationally aided, entropy-driven synthesis of highly efficient and durable multi-elemental alloy catalysts

Multi-elemental alloy nanoparticles (MEA-NPs) hold great promise for catalyst discovery in a virtually unlimited compositional space. However, rational and controllable synthesize of these intrinsically complex structures remains a challenge. Here, we report the computationally aided, entropy-driven design and synthesis of highly efficient and durable catalyst MEA-NPs. The computational strategy includes prescreening of millions of compositions, prediction of alloy formation by density functional theory calculations, and examination of structural stability by a hybrid Monte Carlo and molecular dynamics method. Selected compositions can be efficiently and rapidly synthesized at high temperature (e.g., 1500 K, 0.5 s) with excellent thermal stability. We applied these MEA-NPs for catalytic NH 3 decomposition and observed outstanding performance due to the synergistic effect of multi-elemental mixing, their small size, and the alloy phase. We anticipate that the computationally aided rational design and rapid synthesis of MEA-NPs are broadly applicable for various catalytic reactions and will accelerate material discovery.

36 MATERIALS SCIENCE↗

Optical Properties of Planar and Annular Ternary Superconducting Photonic Crystals in Near-Zero-Permittivity Operation Range

Optical properties of ternary superconducting planar/annular photonic crystals composed of a high-temperature superconductor and two dielectrics were theoretically investigated based on transfer matrix methods in Cartesian and cylindrical coordinates. Electrodynamics of superconductor were modelled using two-fluid model. It is of interest to observe that, for a planar structure, there exists an additional high reflectance band termed as superpolariton gap near the superconducting threshold wavelength for the TM wave at oblique incidences and some reflection dips also were found in the TM reflectance. However, the superpolariton gap and reflection dips were seen for an annular geometry at higher order azimuthal number. For an annular structure, the size of superpolariton gap can be controlled by simply adjusting the starting radius. Moreover, the superpolariton gap in both structures strongly depends on the operating temperature, different combinations of dielectric refractive indices, and thicknesses of dielectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isotopic temperature in spallation reactions

The possibility of applying the double-isotope-ratio method for calculating temperature to spallation products formed by high-energy protons is discussed. It is concluded that, at a specific incident-particle energy, spallation is characterized by a single temperature of the formation of products for targets in the mass range 56 {<=} A {<=} 208. No energy dependence of the temperature that was calculated by the double-isotope-ratio method was observed in the energy range 0.3 {<=} E {<=} 300 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron-phonon coupling strength from ab initio frozen-phonon approach

In this work, we propose a fast method for high-throughput screening of potential superconducting materials. The method is based on calculating metallic screening of zone-center phonon modes, which provides an accurate estimate for the electron-phonon coupling strength. This method is complementary to the recently proposed Rigid Muffin Tin (RMT) method, which amounts to integrating the electronphonon coupling over the entire Brillouin zone (as opposed to the zone center), but in a relatively inferior approximation. We illustrate the use of this method by applying it to MgB 2 , where the high-temperature superconductivity is known to be driven largely by the zone-center modes, and compare it to a sister compound AlB 2 . We further illustrate the usage of this descriptor by screening a large number of binary hydrides, for which accurate first-principle calculations of electron-phonon coupling have been recently published. Together with the RMT descriptor, this method opens a way to perform initial high-throughput screening in search of conventional superconductors via machine learning or data mining.

36 MATERIALS SCIENCE↗

A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability

Spectrally-selective solar absorbers are widely used in solar hot water and concentrating solar power (CSP) systems. However, their performance at high temperatures (>450 °C) is still not satisfactory due to high infrared (IR) emittance and lack of long-term thermal stability. In this work, we explore yttria-stabilized zirconia (YSZ) cermet-based spectrally-selective surfaces for high-temperature solar absorber applications. The developed multilayer selective surface comprises two sunlight-absorbing W–Ni–YSZ cermet layers with different W–Ni volume fractions inside the YSZ matrix, two anti-reflection coatings (ARCs), and one tungsten IR reflection layer for reduced IR emittance and improved thermal stability, deposited on a polished stainless steel (SS) substrate. The fabricated solar absorbers are tested for their long-term thermal stability at 600 °C. We find a distinct change in the surface morphology of the solar absorbers when oxygen is highly deficient in the YSZ-ARC layers. The oxygen deficiency can be effectively overcome through increasing the oxygen partial pressure during sputtering, which leads to a stable solar absorber with a solar absorptance of ~0.91 and a total hemispherical emittance of ~0.13 at 500 °C. Those values are obtained at the actual operating temperature using an absolute and direct method that measures the total hemispherical emittance with high accuracy. In contrast, most reports on solar absorber development in the literature to date use only near room-temperature spectroscopy techniques that have been shown to significantly underestimate the total hemispherical emittance. This makes our experimentally demonstrated total hemispherical emittance value the lowest ever reported for a high-temperature stable solar absorber with solar absorptance above 0.9.

14 SOLAR ENERGY↗

Ultraviolet surface plasmon-mediated low temperature hydrazine decomposition

Conventional methods require elevated temperatures in order to dissociate high-energy nitrogen bonds in precursor molecules such as ammonia or hydrazine used for nitride film growth. We report enhanced photodissociation of surface-absorbed hydrazine (N{sub 2}H{sub 4}) molecules at low temperature by using ultraviolet surface plasmons to concentrate the exciting radiation. Plasmonic nanostructured aluminum substrates were designed to provide resonant near field concentration at λ = 248 nm (5 eV), corresponding to the maximum optical cross section for hydrogen abstraction from N{sub 2}H{sub 4}. We employed nanoimprint lithography to fabricate 1 mm × 1 mm arrays of the resonant plasmonic structures, and ultraviolet reflectance spectroscopy confirmed resonant extinction at 248 nm. Hydrazine was cryogenically adsorbed to the plasmonic substrate in a low-pressure ambient, and 5 eV surface plasmons were resonantly excited using a pulsed KrF laser. Mass spectrometry was used to characterize the photodissociation products and indicated a 6.2× overall enhancement in photodissociation yield for hydrazine adsorbed on plasmonic substrates compared with control substrates. The ultraviolet surface plasmon enhanced photodissociation demonstrated here may provide a valuable method to generate reactive precursors for deposition of nitride thin film materials at low temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the confluence of ultrafast high-temperature sintering and flash sintering phenomena

Ultrafast high-temperature sintering (UHS) and flash sintering are novel methods for rapid sintering of ceramics, often completed in just a few seconds. Here, we show that both also share two additional features: an abrupt rise in electrical conductivity, which is electronic, and electroluminescence. More fundamentally, both are related to phonon physics where MD calculations have shown that proliferation of phonons at the edge of the Brillouin zone can induce Frenkel pairs without the application of electrical fields. Here, we show that, indeed, heating without the application of electric field, can also induce flash: Rapid heating processes of thin films of an oxide-salt deposited on silk fibers, with a propane torch, are shown to induce electronic conductivity, electroluminescence, and rapid sintering of the oxide. Further, the discussion in this article harkens back to two inventions, more than a century ago, which can now be related to flash and UHS: (i) the Nernst glow lamp circa 1900, made from zirconia, and (ii) the Welsbach mantle, constituted from ceria doped thorium oxide, in the late nineteenth century. Thus, the confluence between high heating rate and electric field induced flash phenomena links the past to the new. The emerging question is how injection of phonons that has been shown to create Frenkels can further induce high electronic conductivity and electroluminescence in oxides. Both electronic conductivity and luminescence are likely related to the generation of electron–hole pairs.

36 MATERIALS SCIENCE↗