Search NASA⌕ Search

SEARCH · Search NASA

Results for “INDUCTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Properties and etching rates of negative ions in inductively coupled plasmas and dc discharges produced in Ar/SF{sub 6}

Negative ion production is investigated in a chamber with transversal magnetic filter operated in dc or inductively coupled plasma (ICP) modes in Ar/SF{sub 6} gas mixtures. Plasma parameters are evaluated by mass spectrometry and Langmuir probe for different discharge conditions. The density ratio of negative ion to electron exceeded 300 in dc mode while it was below 100 in the ICP mode. The possibility to apply a large positive bias to an electrode without affecting the plasma potential and the transition from a negative sheath to anodic glow are also investigated. The etching rates by positive and negative ions are evaluated on silicon substrate for different Ar/SF{sub 6} gas ratios. The etching rate by negative ions was with less than 5% smaller than that by positive ions.

36 MATERIALS SCIENCE↗

Experimental investigation of edge-to-center density ratio in inductively coupled plasmas

Edge-to-center density ratios were measured by using a floating harmonics method in inductively coupled plasma (ICP) and were compared to the theoretical model. As the gas pressure increased, the plasma density at the center increased. However, plasma density at the edge showed a different trend; it had a maximum value at 10 mTorr with increasing gas pressures, regardless of ICP powers. This unexpected result could be explained by a global power balance equation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experiments and global model of inductively coupled rf Ar/N{sub 2} discharges

Experiments with a Langmuir probe and optical emission spectroscopy are carried out in inductively coupled rf (13.56 MHz) Ar/N{sub 2} discharges at three total pressures of 30, 60, and 110 mTorr, varying the Ar fractions from 50% to 95%. The electron energy probability functions (EEPFs) measured at all Ar fractions can be approximated using different exponentials in the bulk and high-energy regions, resulting in two temperature approximation of the measured EEPFs. The electron density slightly increases with increasing the Ar fraction at the Ar fractions below 70%, beyond which it relatively abruptly increases. On the other hand, the electron temperatures gradually decrease with the increase in the Ar fraction. The vibrational temperature does not strongly depend on the Ar fraction, whereas the rotational temperature gradually increases with the increase in the Ar fraction. The density of nitrogen atoms remains constant at the Ar fractions below 80%, beyond which it monotonically decreases with increasing the Ar fraction. A global model for electropositive plasma is used in order to investigate the plasma chemistry in Ar/N{sub 2} discharges assuming the Maxwellian electron energy distribution. The model results are compared with the experimental results, obtaining reasonably good agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear enhancement of plasma density in linear combination of multiple collisional internal inductively coupled plasma sources

The nonlinear enhancement of plasma density in a combination of two and four collisional internal inductively coupled plasma sources has been experimentally investigated at different mediate gas pressures and radio-frequency powers, where each source can be considered as independent and the combination is linear. In the nonlinear enhancement phenomenon, the plasma density distribution in combination is not only larger than that of every individual source, but also larger than the linear summation of them in most region of the midplane. The nonlinear enhancement effect in the center of the midplane has stronger functional relation to the plasma density and is sensitive to the arrangement method, while it is weakly affected by the neutral particle density. Meanwhile, the electron temperature approximately keeps constant during the antenna's individual to combinational discharge. Furthermore, a nonlinear diffusion model including the multistep ionization is applied to describe the nonlinear enhancement phenomenon in linear combination, of which the solutions are good consistent with the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical and electrical characterization of pulse-modulated argon atmospheric-pressure inductively coupled microplasma jets

The critical parameters determining the generation of the pulse-modulated argon atmospheric-pressure inductively coupled plasma (AP-ICP) microjet were studied by varying the power, P, pulse-modulation frequency, f, and duty ratio, DR. The temporal changes in the net output power, P{sub net}, monitored between the very high frequency power supply and matching network by an rf sampler, and ArI 4s{sup '}[1/2]{sub 1}{sup O}-4p{sup '}[1/2]{sub 0} emission from the antenna were measured to elucidate the behavior of this plasma. The AP-ICP microjet, which produces high-density (0.9-1.1x10{sup 15} cm{sup -3}) nonequilibrium plasma, consists of an alumina discharge tube with the inner diameter of 0.8 mm. The generation diagram of the pulse-modulated plasma was created by having f as the horizontal axis and DR as the vertical axis while varying P up to 50 W. At f{<=}10 kHz, the plasma was generated at above the linear lines of f and DR, which indicated the existence of the critical power-off period of approximately 80 {mu}s. At f>10 kHz, the pulse-modulated plasma was produced above constant DR and almost independent of f. The time-averaged power, P, which is the product of P and DR, had to be more than 8-10 W to sustain the pulse-modulated plasma. From the measurement of the temporal changes in the net power and ArI emission, the dynamic behavior of the pulse-modulated plasma was revealed as follows. The prebreakdown period was present for {approx}5 {mu}s after the power was turned on. Once the plasma was generated, the impedance was changed and the reflected power gradually decreased. A strong emission peak was observed immediately after the breakdown, followed by the gradual increase up to the steady state. Finally, the intense afterpeak was observed at 0.8 {mu}s after the power was turned off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional particle-in-cell Monte Carlo simulation of a miniature inductively coupled plasma source

Two-dimensional axisymmetric particle-in-cell simulations with Monte Carlo collision calculations (PIC-MCC) have been conducted to investigate argon microplasma characteristics of a miniature inductively coupled plasma source with a 5-mm-diameter planar coil, where the radius and length are 5 mm and 6 mm, respectively. Coupling the rf-electromagnetic fields to the plasma is carried out based on a collisional model and a kinetic model. The former employs the cold-electron approximation and the latter incorporates warm-electron effects. The numerical analysis has been performed for pressures in the range 370-770 mTorr and at 450 MHz rf powers below 3.5 W, and then the PIC-MCC results are compared with available experimental data and fluid simulation results. The results show that a considerably thick sheath structure can be seen compared with the plasma reactor size and the electron energy distribution is non-Maxwellian over the entire plasma region. As a result, the distribution of the electron temperature is quite different from that obtained in the fluid model. The electron temperature as a function of rf power is in a reasonable agreement with experimental data. The pressure dependence of the plasma density shows different tendency between the collisional and kinetic model, implying noncollisional effects even at high pressures due to the high rf frequency, where the electron collision frequency is less than the rf driving frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionization in inductively coupled argon plasmas studied by optical emission spectroscopy

Contribution of stepwise ionization to total ionization was experimentally investigated in low-pressure inductively coupled argon plasmas. In the pressure range 3-50 mTorr, optical emission spectroscopy was employed to determine metastable fractions (metastable density relative to ground state density) by measuring the emission intensity of selected lines. The measured metastable fractions were in good agreement with the calculation, showing a dependence on the discharge pressure. The rate of stepwise ionization was estimated from the excited level densities (measurements and model predictions) and their ionization rate coefficients. It is observed that at relatively low discharge pressures (<10 mTorr) the ionization is mainly provided by the direct ionization, whereas at higher pressure the stepwise ionization is predominant with increasing absorbed power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of an inductively coupled nitrogen-argon plasma by Langmuir probe combined with optical emission spectroscopy

The properties of low-pressure inductively coupled nitrogen-argon plasmas were investigated by using a Langmuir probe combined with optical emission spectroscopy (OES) under the conditions of pressures in the range of 1-30 mTorr and applied rf powers of 200-600 W. In the experiments, the argon was introduced as an actinometer and as an adding gas. The effect of the argon content in the gas mixture was examined in the range of 5%-80%. The electron energy probability function (EEPF), the electron density, and the electron temperature were obtained by using an rf-compensated Langmuir probe. The dissociation fractions were obtained from the OES actinometry. The electron temperature was also obtained by OES corona model and compared with that measured by the probe. The second positive and first negative systems of spectral bands from nitrogen molecules were analyzed to estimate the vibrational and rotational temperatures. The effects of the control parameters on the plasma parameters and dissociation fraction were investigated. While the calculated nitrogen atom density increased with power, it exhibited a maximum value near the Ar content of 30%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid simulations of frequency effects on nonlinear harmonics in inductively coupled plasma

A fluid model is self-consistently established to investigate the harmonic effects in an inductively coupled plasma, where the electromagnetic field is solved by the finite difference time domain technique. The spatiotemporal distribution of harmonic current density, harmonic potential, and other plasma quantities, such as radio frequency power deposition, plasma density, and electron temperature, have been investigated. Distinct differences in current density have been observed when calculated with and without Lorentz force, which indicates that the nonlinear Lorentz force plays an important role in the harmonic effects, especially at low frequencies. Moreover, the even harmonics are larger than the odd harmonics both in the current density and the potential. Finally, the dependence of various plasma quantities with and without the Lorentz force on various driving frequencies is also examined. It is shown that the deposited power density decreases and the depth of penetration increases slightly because of the Lorentz force. The electron density increases distinctly while the electron temperature remains almost the same when the Lorentz force is taken into account.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A self-consistent global model of solenoidal-type inductively coupled plasma discharges including the effects of radio-frequency bias power

We developed a self-consistent global simulator of solenoidal-type inductively coupled plasma discharges and observed the effect of the radio-frequency (rf) bias power on the plasma density and the electron temperature. We numerically solved a set of spatially averaged fluid equations for charged particles, neutrals, and radicals. Absorbed power by electrons is determined by using an analytic electron heating model including the anomalous skin effect. To analyze the effects of rf bias power on the plasma properties, our model also combines the electron heating and global transport modules with an rf sheath module in a self-consistent manner. The simulation results are compared with numerical results by using the commercial software package cfd-ace + (ESI group) and experimental measurements by using a wave cutoff probe and a single Langmuir probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion diode performance on a positive polarity inductive voltage adder with layered magnetically insulated transmission line flow

A pinch-reflex ion diode is fielded on the pulsed-power machine Mercury (R. J. Allen, et al., 15th IEEE Intl. Pulsed Power Conf., Monterey, CA, 2005, p. 339), which has an inductive voltage adder (IVA) architecture and a magnetically insulated transmission line (MITL). Mercury is operated in positive polarity resulting in layered MITL flow as emitted electrons are born at a different potential in each of the adder cavities. The usual method for estimating the voltage by measuring the bound current in the cathode and anode of the MITL is not accurate with layered flow, and the interaction of the MITL flow with a pinched-beam ion diode load has not been studied previously. Other methods for determining the diode voltage are applied, ion diode performance is experimentally characterized and evaluated, and circuit and particle-in-cell (PIC) simulations are performed. Results indicate that the ion diode couples efficiently to the machine operating at a diode voltage of about 3.5 MV and a total current of about 325 kA, with an ion current of about 70 kA of which about 60 kA is proton current. It is also found that the layered flow impedance of the MITL is about half the vacuum impedance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

E-H mode transition in low-pressure inductively coupled nitrogen-argon and oxygen-argon plasmas

This work investigates the characteristics of the E-H mode transition in low-pressure inductively coupled N{sub 2}-Ar and O{sub 2}-Ar discharges using rf-compensated Langmuir probe measurements and optical emission spectroscopy (OES). As the ICP power increases, the emission intensities from plasma species, the electron density, the electron temperature, and the plasma potential exhibit sudden changes. The Ar content in the gas mixture and total gas pressure have been varied in an attempt to fully characterize the plasma parameters. With these control parameters varying, the changes of the transition threshold power and the electron energy distribution function (EEDF) are explored. In N{sub 2}-Ar and O{sub 2}-Ar discharges at low-pressures of several millitorr, the transition thresholds are observed to decrease with Ar content and pressure. It is observed that in N{sub 2}-Ar plasmas during the transition, the shape of the EEDF changes from an unusual distribution with a flat hole near the electron energy of 3 eV in the E mode to a Maxwellian distribution in the H mode. However, in O{sub 2} -Ar plasmas, the EEDFs in the E mode at low Ar contents show roughly bi-Maxwellian distributions, while the EEDFs in the H mode are observed to be nearly Maxwellian. In the E and H modes of O{sub 2}-Ar discharges, the dissociation fraction of O{sub 2} molecules is estimated using optical emission actinometry. During the E-H mode transition, the dissociation fraction of molecules is also enhanced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron density measurement of inductively coupled plasmas by terahertz time-domain spectroscopy (THz-TDS)

The electron densities of argon inductively coupled plasmas were measured by terahertz time-domain spectroscopy (THz-TDS). At a low pressure, the electron densities were also measured with a Langmuir-type double probe and the validity of THz-TDS electron-density measurement in a plasma has been corroborated. As the input radio-frequency (RF) power increases, the plasma density and gas temperature increase, which makes the probe measurement less reliable or even impossible, due to the large heat load to the probe surface. On the contrary, the THz-TDS measurement is unaffected by the gas temperature and becomes more reliable due to the higher electron density at higher input power for plasma generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of mesh bias on the properties of the lateral conductivity of intrinsic microcrystalline silicon films deposited by low-frequency inductively coupled plasma

A meshgrid is installed to study the effect of mesh bias on the lateral conductivity properties of intrinsic microcrystalline silicon films deposited by low frequency inductively coupled plasma. When a mesh bias is increased from 0 to -15 V, the dark conductivity remarkably decreases by three orders of magnitude, whereas the ratio of the photo and dark conductivity improves by one order. On contrary, the applied substrate bias has only a marginal effect on the lateral conductivity. It is revealed from the measured electron energy distribution functions that the sheath layer induced ion bombardment is responsible for the drastic change.

36 MATERIALS SCIENCE↗

A comprehensive study of different gases in inductively coupled plasma torch operating at one atmosphere

A numerical study is done to understand the possible operating regimes of RF-ICP torch (3 MHz, 50 kW) using different gases for plasma formation at atmospheric pressure. A two dimensional numerical simulation of RF-ICP torch using argon, nitrogen, oxygen, and air as plasma gas has been investigated using computational fluid dynamic (CFD) software fluent{sup (c)}. The operating parameters varied here are central gas flow, sheath gas flow, RF-power dissipated in plasma, and plasma gas. The temperature contours, flow field, axial, and radial velocity profiles were investigated under different operating conditions. The plasma resistance, inductance of the torch, and the heat distribution for various plasma gases have also been investigated. The plasma impedance of ICP torch varies with different operating parameters and plays an important role for RF oscillator design and power coupling. These studies will be useful to decide the design criteria for ICP torches required for different material processing applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress-induced VO{sub 2} films with M2 monoclinic phase stable at room temperature grown by inductively coupled plasma-assisted reactive sputtering

We report on growth of VO{sub 2} films with M2 monoclinic phase stable at room temperature under atmospheric pressure. The films were grown on quartz glass and Si substrates by using an inductively coupled plasma-assisted reactive sputtering method. XRD-sin{sup 2}{Psi} measurements revealed that the films with M2 phase are under compressive stress in contrast to tensile stress of films with M1 phase. Scanning electron microscopy observations revealed characteristic crystal grain aspects with formation of periodical twin structure of M2 phase. Structural phase transition from M2 to tetragonal phases, accompanied by a resistance change, was confirmed to occur as the temperature rises. Growth of VO{sub 2} films composed of M2 phase crystalline is of strong interest for clarifying nature of Mott transition of strongly correlated materials.

36 MATERIALS SCIENCE↗

Radio frequency-power and the ring-mode to red-mode transition in an inductively coupled plasma

The optical output of an alkali-metal inductively coupled plasma (alkali-ICP) plays an important role in both atomic magnetometers and atomic clocks, producing these devices' atomic signals through optical pumping. Unfortunately, though the alkali-ICP's optical pumping efficiency grows exponentially with temperature, at relatively high temperatures ({approx}140 deg. C) the discharge transitions from ''ring mode'' to ''red mode'', which is a spectral change in the plasma's output that corresponds broadly to a transition from ''good emission'' for optical pumping to ''poor emission.'' Recently, evidence has accumulated pointing to radiation trapping as the mechanism driving the ring-mode to red-mode transition, suggesting that the phenomenon is primarily linked to the alkali vapor's temperature. However, observations of the transition made in the 1960 s, demonstrating that the ICP temperature associated with the transition depended on rf-power, would appear to cast doubt on this mechanism. Here, we carefully investigate the influence of rf-power on the ring-mode to red-mode transition, finding that rf-power only affects the transition through discharge heating. Thus, the present work shows that the primary effect of rf-power on the ring-mode to red-mode transition can be understood in terms of the radiation trapping mechanism.

74 ATOMIC AND MOLECULAR PHYSICS↗

Non-inductive current start-up assisted by energetic electrons in Q-shu University experiment with steady-state spherical tokamak

After intensive discharge cleaning of the chamber wall, non-inductive current start-up experiments have been successfully performed in QUEST in moderate vertical fields of about 1.0-1.5 mT with positive n-index. Simultaneously, with increasing plasma current, an asymmetric toroidal flow of energetic electrons was observed and direct measurements of current driven by this asymmetric flow were taken with a newly developed Langmuir probe technique. A numerical study of the energetic electron orbits indicates that the total current is enough to play a dominant role in the formation of a closed flux surface in QUEST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗