Search NASA⌕ Search

SEARCH · Search NASA

Results for “Importance Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Desorption Behavior of Carbon Tetrachloride and Chloroform in contaminated Low Organic Carbon Aquifer Sediments

Experimental determination of contaminant behavior in deep aquifer sediments is challenging because of the cost and difficulty associated with sample collection. On the other hand, parameter values important to contaminant transport (e.g., distribution coefficient) derived from such sediments may be more accurate than those determined by estimation methods. Furthermore, experiments performed with sediments where the contaminants have been in contact with the sediments for decades are more likely to reveal kinetic controls on contaminant transport not as readily revealed in short contact time experiments. We report the first measurements of CCl4 and CHCl3 distribution coefficients in contaminated Hanford sediments with varying physical/chemical properties.

54 ENVIRONMENTAL SCIENCES↗

Numerical modeling of elution peak profiles in supercritical fluid chromatography. Part I-Elution of an unretained tracer

When chromatography is carried out with high-density carbon dioxide as the main component of the mobile phase (a method generally known as 'supercritical fluid chromatography' or SFC), the required pressure gradient along the column is moderate. However, this mobile phase is highly compressible and, under certain experimental conditions, its density may decrease significantly along the column. Such an expansion absorbs heat, cooling the column, which absorbs heat from the outside. The resulting heat transfer causes the formation of axial and radial gradients of temperature that may become large under certain conditions. Due to these gradients, the mobile phase velocity and most physico-chemical parameters of the system (viscosity, diffusion coefficients, etc.) are no longer constant throughout the column, resulting in a loss of column efficiency, even at low flow rates. At high flow rates and in serious cases, systematic variations of the retention factors and the separation factors with increasing flow rates and important deformations of the elution profiles of all sample components may occur. The model previously used to account satisfactorily for the effects of the viscous friction heating of the mobile phase in HPLC is adapted here to account for the expansion cooling of the mobile phase in SFC and is applied to the modeling of the elution peak profiles of an unretained compound in SFC. The numerical solution of the combined heat and mass balance equations provides temperature and pressure profiles inside the column, and values of the retention time and efficiency for elution of this unretained compound that are in excellent agreement with independent experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical modeling of the elution peak profiles of retained solutes in supercritical fluid chromatography

In supercritical fluid chromatography (SFC), the significant expansion of the mobile phase along the column causes the formation of axial and radial gradients of temperature. Due to these gradients, the mobile phase density, its viscosity, its velocity, its diffusion coefficients, etc. are not constant throughout the column. This results in a nonuniform flow velocity distribution, itself causing a loss of column efficiency in certain cases, even at low flow rates, as they do in HPLC. At high flow rates, an important deformation of the elution profiles of the sample components may occur. The model previously used to account satisfactorily for the retention of an unsorbed solute in SFC is applied to the modeling of the elution peak profiles of retained compounds. The numerical solution of the combined heat and mass balance equations provides the temperature and the pressure profiles inside the column and values of the retention time and the band profiles of retained compounds that are in excellent agreement with independent experimental data for large value of mobile phase reduced density. At low reduced densities, the band profiles can strongly depend on the column axial distribution of porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation kinetics model for metals

We develop a new model for phase transformation kinetics in metals by generalizing the Levitas–Preston (LP) phase field model of martensite phase transformations (see Levitas and Preston (2002a,b) and Levitas et al. (2003)) to arbitrary pressure. Furthermore, we account for and track: the interface speed of the pressure-driven phase transformation, properties of critical nuclei, as well as nucleation at grain sites and on dislocations and homogeneous nucleation. The volume fraction evolution of each phase is described by employing KJMA (Kolmogorov, 1937; Johnson and Mehl, 1939; Avrami, 1939, 1940, 1941) kinetic theory. We then test our new model for iron under ramp loading conditions and compare our predictions for the α → ϵ iron phase transition to experimental data of Smith et al. (2013). In conclusion, more than one combination of material and model parameters (such as dislocation density and interface speed) led to good agreement of our simulations to the experimental data, thus highlighting the importance of having accurate microstructure data for the sample under consideration.

36 MATERIALS SCIENCE↗

Water Calibration Measurements for Neutron Radiography: Application to Water Content Quantification in Porous Media

Using neutron radiography, the measurement of water thickness was performed using aluminum (Al) water calibration cells at the High Flux Isotope Reactor (HFIR) Cold-Guide (CG) 1D neutron imaging facility at Oak Ridge National Laboratory, Oak Ridge, TN, USA. Calibration of water thickness is an important step to accurately measure water contents in samples of interest. Neutron attenuation by water does not vary linearly with thickness mainly due to beam hardening and scattering effects. Transmission measurements for known water thicknesses in water calibration cells allow proper correction of the underestimation of water content due to these effects. As anticipated, strong scattering effects were observed for water thicknesses greater than 2 mm when the water calibration cells were positioned close to the face of the detector / scintillator (0 and 2.4 cm away, respectively). The water calibration cells were also positioned 24 cm away from the detector face. These measurements resulted in less scattering and this position (designated as the sample position) was used for the subsequent experimental determination of the neutron attenuation coefficient for water. Neutron radiographic images of moist Flint sand in rectangular and cylindrical containers acquired at the sample position were used to demonstrate the applicability of the water calibration. Cumulative changes in the water volumes within the sand columns during monotonic drainage determined by neutron radiography were compared with those recorded by direct reading from a burette connected to a hanging water column. In general, the neutron radiography data showed very good agreement with those obtained volumetrically using the hanging water-column method. These results allow extension of the calibration equation to the quantification of unknown water contents within other samples of porous media.

Kang, Misun↗

Reactive Transport Modeling of Shale–Fluid Interactions after Imbibition of Fracturing Fluids

Injection of hydraulic fracturing fluid (HFF) into shale formations for unconventional oil/gas production results in chemical reactions in the shale matrix. Our recent experimental study determined the depths to which different types of reactions between the shale matrix and the HFF extended. In the present study, we built continuum-scale reactive transport models to understand the coupling of chemical reactions and the transport of aqueous species in these shale–HFF systems. Calibration of the model with our previous experimental results reveals that it takes hours to months for the shale matrix to completely neutralize the imbibed acids, depending primarily upon the carbonate content of the shale. Both the HFF pH and pore pH affect the location of barite precipitation, resulting in unique barite precipitation profiles extending millimeters into calcite-rich Eagle Ford shale but only tens of micrometers into low-carbonate Marcellus shale. In addition, dissolved oxygen and extracted bitumen are key to reproducing the experimental observation of Fe(III) (oxyhydr)oxide formation in the shale matrix as a result of pyrite dissolution in the shales. A comparison between the modeling results of porosity in the present study to experimentally measured permeabilities in our previous study suggests that chemical reactions occurring at a greater depth than the observable reaction zone might have impacted permeability. Our model serves as a benchmark for efficiently modeling water–rock interactions in similar systems where bulk rock samples react with a solution in batch reactors. Important reactive transport processes were ascertained via modeling, which allows for quantitative prediction of shale–HFF interactions in shale matrices given the shale and HFF compositions.

58 GEOSCIENCES↗

Shifts in Carbon Emissions Versus Sequestration From Hydropower Reservoirs in the Southeastern United States

Reservoirs are a significant source of carbon (C) to the atmosphere, but their emission rates vary in space and time. Here we compared C emissions via diffusive and ebullitive pathways at several stations in six large hydropower reservoirs in the southeastern US that were previously sampled in summer 2012. We found that carbon dioxide (CO 2 ) diffusion was the dominant flux pathway during 2012 and 2022, with only three exceptions where methane (CH 4 ) diffusion or CH 4 ebullition dominated. CH 4 diffusion rates were positively associated with water temperature. However, we found no clear predictors of CH 4 ebullition, which had extremely high variability, with rates ranging from 0 to 739 mg C m -2 day -1 . For CO 2 diffusion, the direction of the flux shifted between 2012 and 2022, where all but three stations across all reservoirs emitted CO 2 in summer 2012, but every station sequestered CO 2 in summer 2022. Here, indicators of greater algal production were associated with CO 2 sequestration, including surface chlorophyll- a concentration, surface dissolved oxygen saturation, and pH. Additional sampling campaigns outside the summer season highlighted the importance of seasonal phenology in primary production on the direction of CO 2 diffusive fluxes, which shifted to positive CO 2 fluxes by the end of August as productivity decreased. Our results demonstrate the importance of capturing CO 2 sequestration in field and modeling measurements and understanding the seasonal drivers of these estimates. Measuring C emissions from multiple pathways in reservoirs and understanding their spatiotemporal responses and variability are vital to reducing uncertainties in global upscaling efforts.

13 HYDRO ENERGY↗

Subsurface hydrocarbon degradation strategies in low- and high-sulfate coal seam communities identified with activity-based metagenomics

Environmentally relevant metagenomes and BONCAT-FACS derived translationally active metagenomes from Powder River Basin coal seams were investigated to elucidate potential genes and functional groups involved in hydrocarbon degradation to methane in coal seams with high- and low-sulfate levels. An advanced subsurface environmental sampler allowed the establishment of coal-associated microbial communities under in situ conditions for metagenomic analyses from environmental and translationally active populations. Metagenomic sequencing demonstrated that biosurfactants, aerobic dioxygenases, and anaerobic phenol degradation pathways were present in active populations across the sampled coal seams. In particular, results suggested the importance of anaerobic degradation pathways under high-sulfate conditions with an emphasis on fumarate addition. Under low-sulfate conditions, a mixture of both aerobic and anaerobic pathways was observed but with a predominance of aerobic dioxygenases. The putative low-molecular-weight biosurfactant, lichysein, appeared to play a more important role compared to rhamnolipids. The methods used in this study—subsurface environmental samplers in combination with metagenomic sequencing of both total and translationally active metagenomes—offer a deeper and environmentally relevant perspective on community genetic potential from coal seams poised at different redox conditions broadening the understanding of degradation strategies for subsurface carbon.

59 BASIC BIOLOGICAL SCIENCES↗

Figures of merit for focusing mega-electron-volt ion beams in biomedical imaging and proton beam writing

A figure of merit (FOM) has been developed for focusing quadrupole multiplet lenses for ion micro- and nanobeam systems. The method which is based on measurement of the central peak of the two-dimensional autocorrelation function of an image provides separate FOM for the horizontal and vertical directions. The approach has been tested by comparison with the edge widths obtained by nonlinear fitting the edge widths of a Ni grid and found to be reliable. The FOM has the important advantage for ion beam imaging of biomedical samples that the fluence needed is considerably lower than for edge fitting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation Of Ortho-Positronium Intensity With Doppler Broadening For Rubber Above And Below The Glass Transition Temperature

Previous research has demonstrated a correlation between the Doppler broadening S parameter and the intensity of the ortho-positronium lifetime component in polymers that depends on the composition of the polymer. On the other hand, rubber polymers do not show this correlation and behave more like liquids for which the S parameter is essentially independent of the ortho-positronium intensity. The bubble model has been suggested as an explanation of the lack of correlation in analogy with liquids, but the bubble model applied to rubber is controversial. There are two important differences between the rubber and the polymers samples: first, the rubber samples at room temperature were all above the glass transition temperature (T{sub G}). Second, the rubber samples all contained sulfur and were vulcanized. These differences were investigated by first measuring the S parameter for six rubber samples below T{sub G} where the bubble model would not be expected to work. Second, raw rubber samples that did not contain any sulfur and were unvulcanized were studied at room temperature. The results show that the lack of correlation between the S parameter and the ortho-positronium intensity previously observed for vulcanized rubber is due to the inhibition of positronium formation by the sulfur in the vulcanized rubber samples rather than to the rubber being above T{sub G}.

36 MATERIALS SCIENCE↗

Automation of a high-speed imaging setup for differential viscosity measurements

We present the automation of a setup previously used to assess the viscosity of pleural effusion samples and discriminate between transudates and exudates, an important first step in clinical diagnostics. The presented automation includes the design, testing, and characterization of a vacuum-actuated loading station that handles the 2 mm glass spheres used as sensors, as well as the engineering of electronic Printed Circuit Board (PCB) incorporating a microcontroller and their synchronization with a commercial high-speed camera operating at 10 000 fps. The hereby work therefore focuses on the instrumentation-related automation efforts as the general method and clinical application have been reported earlier [Hurth et al., J. Appl. Phys. 110, 034701 (2011)]. In addition, we validate the performance of the automated setup with the calibration for viscosity measurements using water/glycerol standard solutions and the determination of the viscosity of an “unknown” solution of hydroxyethyl cellulose.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Predicting proton titration in cationic micelle and bilayer environments

Knowledge of the protonation behavior of pH-sensitive molecules in micelles and bilayers has significant implications in consumer product development and biomedical applications. However, the calculation of pK{sub a}’s in such environments proves challenging using traditional structure-based calculations. Here we apply all-atom constant pH molecular dynamics with explicit ions and titratable water to calculate the pK{sub a} of a fatty acid molecule in a micelle of dodecyl trimethylammonium chloride and liquid as well as gel-phase bilayers of diethyl ester dimethylammonium chloride. Interestingly, the pK{sub a} of the fatty acid in the gel bilayer is 5.4, 0.4 units lower than that in the analogous liquid bilayer or micelle, despite the fact that the protonated carboxylic group is significantly more desolvated in the gel bilayer. This work illustrates the capability of all-atom constant pH molecular dynamics in capturing the delicate balance in the free energies of desolvation and Coulombic interactions. It also shows the importance of the explicit treatment of ions in sampling the protonation states. The ability to model dynamics of pH-responsive substrates in a bilayer environment is useful for improving fabric care products as well as our understanding of the side effects of anti-inflammatory drugs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The characteristic assessment of spent ion exchange resin from PUSPATI TRIGA REACTOR (RTP) for immobilization process

In this paper, spent ion exchange resin generated from PUSPATI TRIGA reactor (RTP) in Malaysian Nuclear Agency were characterized based on the water content, radionuclide content and radionuclide leachability. The result revealed that the water content in the spent resin is 48%. Gamma spectrometry analysis indicated the presence of {sup 134}Cs, {sup 137}Cs, {sup 152}Eu, {sup 54}Mn, {sup 58}Co, {sup 60}Co and {sup 65}Zn. The leachability test shows a small concentrations (<1 Bq/l) of {sup 152}Eu and {sup 134}Cs were leached out from the spent resin while {sup 60}Co activity concentrations slightly exceeded the limit generally used for industrial wastewater i.e. 1 Bq/l. Characterization of spent ion exchange resin sampled from RTP show that this characterization is important as a basis to immobilize this radioactive waste using geopolymer technology.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measuring the depth profiles of strain/composition in AlGaN-graded layer by high-resolution x-ray diffraction

Here, we demonstrate X-ray fitting through kinematical simulations of the intensity profiles of symmetric reflections for epitaxial compositionally graded layers of AlGaN grown by molecular beam epitaxy pseudomorphically on [0001]-oriented GaN substrates. These detailed simulations depict obvious differences between changes in thickness, maximum concentration, and concentration profile of the graded layers. Through comparison of these simulations with as-grown samples, we can reliably determine these parameters, most important of which are the profiles of the concentration and strain which determine much of the electrical properties of the film. In addition to learning about these parameters for the characterization of thin film properties, these fitting techniques create opportunities to calibrate growth rates and control composition profiles of AlGaN layers with a single growth rather than multiple growths as has been done traditionally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Seebeck Coefficient and Phonon Drag in Silicon

We present a theory of the phonon-drag Seebeck coe cient in nondegenerate semiconductors, and apply it to silicon for temperatures 30 < T < 300K. Our calculation uses only parameters from the literature, and previous calculations of the phonon lifetime. We nd excellent agreement with the measurements of Geballe and Hull [Phys.Rev. 98, 940 (1955)]. The phonon-drag term dominates at low temperature, and shows an important dependence on the dimensions of the experimental sample.

36 MATERIALS SCIENCE↗

Study of trap levels in β-Ga 2 O 3 by thermoluminescence spectroscopy

Electronic defects with shallow and deep levels in β-Ga 2 O 3 single crystals were investigated by thermoluminescence (TL) spectroscopy. Undoped, Fe-doped, Sn-doped, and Mg-doped β-Ga 2 O 3 single crystals grown by different methods were studied, and thermal activation energies of defects were calculated using the initial rise method. Hall-effect measurements and optical absorption spectroscopy were performed to determine the electrical transport properties and optical bandgaps. It was found that the dopants do not have any effect on the bandgap energy, which is important for comparing the trap levels in the samples. Three deep trap levels were found in the undoped crystals; the activation energy, ED, and concentration of defect centers for all of them have slightly changed after doping with Fe and Mg. Fe doping induced an additional defect center with activation energy of 0.62 eV. The measurements revealed the absence of TL emission in Sn doped crystals indicating that Sn doping may quench luminescence centers or modified some original electronic defects to inactive electron traps. The second interpretation “decrease of traps” may align with the successful incorporation of Sn as a donor and the high conductivity of Sn doped crystals revealed from Hall-effect measurements. This work also illustrates that the semi-insulating characteristics of Fe and Mg doped Ga 2 O 3 are associated with the increase of the concentration of original traps in the crystal as well as the formation of new electron traps acting as deep acceptors. Recombination centers in all crystals are assumed to be associated with iron impurities.

74 ATOMIC AND MOLECULAR PHYSICS↗

Efficient construction of generalized master equation memory kernels for multi-state systems from nonadiabatic quantum-classical dynamics

Techniques derived from the generalized quantum master equation (GQME) framework have provided the basis for elucidating energy and charge transfer in systems ranging from molecular solids to photosynthetic complexes. Recently, the nonperturbative combination of the GQME with quantum-classical methods has resulted in approaches whose accuracy and efficiency exceed those of the original quantumclassical schemes while offering significant accuracy improvements over perturbative expansions of the GQME. In this work, we show that, while the non-Markovian memory kernel required to propagate the GQME scales quartically with the number of subsystem states, the number of trajectories required scales at most quadratically when using quantum-classical methods to construct the kernel. We then present an algorithm that allows further acceleration of the quantum-classical GQME by offering a way to selectively sample the kernel matrix elements that are most important to the process of interest. We demonstrate the utility of these advances by applying the combination of Ehrenfest mean field theory with the GQME (MF-GQME) to models of the Fenna-Matthews-Olson (FMO) complex and the light harvesting complex II (LHCII), with 7 and 14 states, respectively. This allows us to show that the MF-GQME is able to accurately capture all the relevant dynamical time scales in LHCII: the initial nonequilibrium population transfer on the femtosecond time scale, the steady state-type trapping on the picosecond time scale, and the long time population relaxation. Remarkably, all of these physical effects spanning tens of picoseconds can be encoded in a memory kernel that decays only after ~65 fs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗