Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Preparation and characterization of (SBA-15)-La{sub 2}O{sub 3} host-guest composite materials

Lanthanum oxide was successfully incorporated into an SBA-15 mesoporous molecular sieve via the microwave-assisted synthesis method (MASM) for the first time, and was compared with liquid-phase grafting and thermal diffusion methods. A series of characterizations were used to characterize the prepared materials. The results showed that the preparation of (SBA-15)-La{sub 2}O{sub 3} host-guest composite materials by MASM has the advantages of simpler operation, higher efficiency and more plentiful lanthanum oxide could be incorporated into SBA-15 compared with other methods. In the prepared host-guest (SBA-15)-La{sub 2}O{sub 3} materials, the frameworks of the host molecular sieve were kept intact, their structures were still kept high ordered and the guest lanthanum oxide locates inside the pores of the SBA-15. The sizes of the prepared (SBA-15)-La{sub 2}O{sub 3} samples were 340-357 nm. The prepared host-guest composite materials show the properties of luminescence, and the luminescent intensities are about 2 times of bulk La{sub 2}O{sub 3}. - Graphical abstract: Lanthanum oxide was successfully incorporated into SBA-15 mesoporous molecular sieve via the microwave-assisted synthesis method (MASM) for the first time. The results showed that the preparation of (SBA-15)-La{sub 2}O{sub 3} host-guest composite materials by MASM has the advantages of simpler operation, higher efficiency and more plentiful lanthanum oxide can be incorporated into SBA-15 compared with other methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural analysis of the microporous semiconductor K-SBC-1 during its reversible sorption of water

The reversible sorption of water molecules in the crystalline microporous semiconductor K-SBC-1 was investigated using temperature-resolved single-crystal XRD analysis. Three crystallographic sites of adsorbed water molecules, differing in adsorption strength, were discovered in the pores of K-SBC-1. The least tightly bound is located at the centre of the {l_brace}Sb{sub 12}O{sub 18}{r_brace} tube and begins to desorb around 50 deg. C. Above 200 deg. C the more strongly bound water molecules rearrange from their potassium-coordinating positions to the centre of the tube, thus obtaining the characteristics of the loosely bound water, and desorb thereafter. At 240 deg. C approximately 10% of the water has desorbed, leaving the host framework of K-SBC-1 intact. Upon re-adsorption of water at room temperature the molecules preferentially adsorb at sites in the centre of the {l_brace}Sb{sub 12}O{sub 18}{r_brace} tube. This shows that a heat treatment of 240-300 deg. C activates K-SBC-1 for sorption and explains the observed facile desorption of water from activated samples. - Graphical abstract: Three crystallographic adsorption sites for water are found in the crystalline microporous semiconductor K-SBC-1. Upon heating to 240 deg. C the material desorbs enough strongly bound water to become activated for reversible sorption at room temperature, due to redistribution of water occupancy between the strong and weak adsorption sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure response of vacancy ordered maghemite ({gamma}-Fe{sub 2}O{sub 3}) and high pressure transformed hematite ({alpha}-Fe{sub 2}O{sub 3})

Combined XRD and Moessbauer effect spectroscopy studies to high pressures of {approx}30 GPa of vacancy ordered maghemite are presented. The vacancy ordered superstructure is robust and remains intact up to the pressure-induced onset transition to hematite at 13-16 GPa. The pressure transformed hematite is shown to be crystallographically textured, unlike the randomised low pressure maghemite phase. This arises out of a pressure or stress instigated topotactic transformation of the cubic-spinel to hexagonal-corundum structure. The textured sample permits us to obtain information on the spin reorientation behavior of the pressure transformed hematite in compression and decompression sequences. Spin reorientation is restricted to {approx}15 Degree-Sign over wide pressure ranges, attributable to the effect of entrapped vacancies in the high pressure structure. Thus there are structural and magnetic peculiarities specific to pressure transformed hematite not evident in pressurized hematite starting material. These are triggered by the maghemite{yields}hematite transformation. - Graphical abstract: Pressure instigated topotactic transformation of vacancy ordered {gamma}-Fe{sub 2}O{sub 3}{yields}{alpha}-Fe{sub 2}O{sub 3}. There is restricted spin (B{sub hf}) reorientation in the new pressure transformed hematite due to entrapped vacancies. The change in direction of V{sub zz} signifies a distortion of the FeO{sub 6} octahedral local environment. Highlights: Black-Right-Pointing-Pointer Robust vacancy ordered superstructure in maghemite to high pressures. Black-Right-Pointing-Pointer Pressure instigated topotactic transformation to hematite and subsequent texture. Black-Right-Pointing-Pointer Defect trapping in the pressure transformed hematite. Black-Right-Pointing-Pointer Entrapped defects restricts spin reorientation in pressure transformed hematite. Black-Right-Pointing-Pointer Contrasting behavior with pressurized hematite starting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion-induced structural transformation of a sulfate-incorporated 2D Cd(II)–organic framework

A Cd(II)–organic framework {[Cd_2(tpim)_4(SO_4)(H_2O)_2]·(SO_4)·21H_2O}{sub n} (1) was synthesized by reacting CdSO{sub 4}·8/3H{sub 2}O and 2,4,5-tri(4-pyridyl)imidazole (tpim) under hydrothermal conditions. A structural analysis showed that compound 1 adopts a layered structure in which the [Cd(tpim){sub 2}]{sub n} chains are linked by sulfate anions. These 2D layers are further packed into a 3D supramolecular framework via π–π interactions. The structure contains two types of SO{sub 4}{sup 2−} anions, i.e., bridging SO{sub 4}{sup 2−} and free SO{sub 4}{sup 2−} anions, the latter of which are included in the large channels of the framework. Compound 1 exhibits interesting anion exchange behavior. In the presence of SCN{sup −} anions, both the bridging and free SO{sub 4}{sup 2−} anions in 1 were completely exchanged by SCN{sup −} ligands to form a 1D species [Cd(tpim){sub 2}(SCN){sub 2}] (1A), in which the SCN{sup –} moieties function as a monodentate ligand. On the other hand, when compound 1 was ion exchanged with N{sub 3}{sup −} anions in aqueous solution, the bridging SO{sub 4}{sup 2−} moieties remained intact, and only the free guest SO{sub 4}{sup 2−} were replaced by N{sub 3}{sup −} anions. The gas adsorption behavior of the activated compound 1 was also investigated. - Highlights: • An interesting anion-induced structural transformation of a sulfate-incorporated 2D Cd(II)–organic framework is reported. • The sulfate-incorporated 2D layer compound exhibits very different anion exchange behavior with respect to SCN{sup −} and N{sub 3}{sup −}. • Both the bridging and free SO{sub 4}{sup 2−} anions in the 2D structure were completely exchanged by SCN{sup −} ligands, resulting in the formation of a 1D species. However, in the case of N{sub 3}{sup −} anions, only the free guest SO{sub 4}{sup 2−} in the structure was replaced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal annealing dynamics of carbon-coated LiFePO{sub 4} nanoparticles studied by in-situ analysis

The thermal behavior of core-shell carbon-coated lithium iron phosphate (LiFePO{sub 4}-C) nanoparticles made by flame spray pyrolysis (FSP) during annealing was investigated by in-situ transmission electron microscopy (TEM), in-situ X-ray powder diffraction (XRD) as well as ex-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Crystallization of the initially glassy LiFePO{sub 4}-C nanoparticles starts at quite low temperatures (T=400 °C), forming single crystals inside the confinement of the carbon shell. Upon increasing the temperature to T≥700 °C, LiFePO{sub 4} starts to diffuse through the carbon shell resulting in cavities inside the mostly intact carbon shell. By increasing the temperature further to T≥800 °C, the initial core-shell morphology converts into open carbon shells (flakes and cenospheres) and bulky LiFePO{sub 4} particles (diameter in the range 300–400 nm), in agreement with ex-situ experiments. - Graphical abstract: TEM images of a typical sample area recorded at room temperature and after heating in-situ heating reveal the growth of particles and the formation of empty carbon cages. - Highlights: • LiFePO{sub 4} coated by a carbon shell is produced by flame spray pyrolysis. • The amorphous LiFePO{sub 4} starts to crystallize at 400 °C as revealed by in-situ XRD. • Crystal growth was visualized by TEM heating experiments. • The formation of empty carbon cages starts at 700 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of layered zinc hydroxide nitrate and zinc/nickel double hydroxide salts in the removal of chromate ions from solutions

Layered zinc hydroxide nitrate (ZnHN) and Zn/Ni layered double hydroxide salts were synthesized and used to remove chromate ions from solutions at pH 8.0. The materials were characterized by many instrumental techniques before and after chromate ion removal. ZnHN decomposed after contact with the chromate solution, whereas the layered structure of Zn/Ni hydroxide nitrate (Zn/NiHN) and Zn/Ni hydroxide acetate (Zn/NiHA) remained their layers intact after the topotactic anionic exchange reaction, only changing the basal distances. ZnHN, Zn/NiHN, and Zn/NiHA removed 210.1, 144.8, and 170.1 mg of CrO{sub 4}{sup 2−}/g of material, respectively. Although the removal values obtained for Zn/NiHN and Zn/NiHA were smaller than the values predicted for the ideal formulas of the solids (194.3 and 192.4 mg of CrO{sub 4}{sup 2−}/g of material, respectively), the measured capacities were higher than the values achieved with many materials reported in the literature. Kinetic experiments showed the removal reaction was fast. To facilitate the solid/liquid separation process after chromium removal, Zn/Ni layered double hydroxide salts with magnetic supports were also synthesized, and their ability to remove chromate was evaluated. - Highlights: • Zinc hydroxide nitrate and Zn/Ni hydroxide nitrate or acetate were synthesized. • The interlayer anions were replaced by chromate anions at pH=8.0. • Only Zn/Ni hydroxide nitrate or acetate have the structure preserved after exchange. • Fast exchange reaction and high capacity of chromate removal were observed. • Magnetic materials were obtained to facilitate the solids removal the from solutions.

36 MATERIALS SCIENCE↗

An alternative review of facts, coincidences and past and future studies of the Lusi eruption

The cause of the Lusi mud eruption remains controversial. The review by Miller and Mazzini (2017) firmly dismisses a role of drilling operations at the adjacent Banjarpanji-1 well and argues that the eruption was triggered by the M6.3 Yogyakarta earthquake some 254 km away. We disagree with these conclusions. Here, we review drilling data and the daily drilling reports, which clearly confirm that the wellbore was not intact and that there was a subsurface blowout. Downhole pressure data from Lusi directly witness the birth of Lusi at the surface on the 29th of May 2006, indicating a direct connection between the well and the eruption. Furthermore, the daily drilling reports specifically state that Lusi activity was visibly altered on three separate occasions by attempts to kill the eruption by pumping dense fluid down the BJP-1 well, providing further evidence of a connection between the wellbore and Lusi. By comparison with other examples of newly initiated mud eruptions elsewhere by other earthquakes, the Yogyakarta earthquake was far away given its magnitude. The seismic energy density of the Yogyakarta earthquake was only 0.0043 J/m 3 , which is less than a quarter of the minimum 0.019 J/m 3 seismic energy density that has ever been inferred to trigger other mud eruptions. We show that the Lusi area had previously experienced other shallow earthquakes with similar frequencies and stronger ground shaking that did not trigger an eruption. The data from the BJP-1 well indicates that there was no prior hydrodynamic connection between deep overpressured hydrothermal fluids and the shallow Kalibeng clays, and that there was no evidence of any liquefaction or remobilization of the Kalibeng clays induced by the earthquake. We thus strongly favor initiation by drilling and not an earthquake.

02 PETROLEUM↗

Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds

This work investigates the effects of molybdenum nanoparticles on the growth of interfacial intermetallic compound between Sn-3.8Ag-0.7Cu solder and copper substrate during multiple reflow. Molybdenum nanoparticles were mixed with Sn-3.8Ag-0.7Cu solder paste by manual mixing. Solder samples were reflowed on a copper substrate in a 250 Degree-Sign C reflow oven up to six times. The molybdenum content of the bulk solder was determined by inductive coupled plasma-optical emission spectrometry. It is found that upon the addition of molybdenum nanoparticles to Sn-3.8Ag-0.7Cu solder, the interfacial intermetallic compound thickness and scallop diameter decreases under all reflow conditions. Molybdenum nanoparticles do not appear to dissolve or react with the solder. They tend to adsorb preferentially at the interface between solder and the intermetallic compound scallops. It is suggested that molybdenum nanoparticles impart their influence on the interfacial intermetallic compound as discrete particles. The intact, discrete nanoparticles, by absorbing preferentially at the interface, hinder the diffusion flux of the substrate and thereby suppress the intermetallic compound growth. - Highlights: Black-Right-Pointing-Pointer Mo nanoparticles do not dissolve or react with the SAC solder during reflow. Black-Right-Pointing-Pointer Addition of Mo nanoparticles results smaller IMC thickness and scallop diameter. Black-Right-Pointing-Pointer Mo nanoparticles influence the interfacial IMC through discrete particle effect.

36 MATERIALS SCIENCE↗

Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites

Highlights: • The NiTi-based composites were in-situ synthesized by SLM. • Ni{sub 4}Ti{sub 3} could tailor the phase transformation temperature of TiC/NiTi composites. • A three-dimensional stress field modeling of TiC/NiTi composites was established. • The relationship between growth of Ni{sub 4}Ti{sub 3} variants and cyclic stress was disclosed. - Abstract: NiTi-based composites were in-situ synthesized by selective laser melting (SLM) additive manufacturing technology with formation of a great many Ni{sub 4}Ti{sub 3} precipitates. The differential scanning calorimetry (DSC) were carried out to exhibit the similar phase transformation temperature (A{sub s} = 51.82 °C, A{sub f} = 94.02 °C, M{sub s} = 55.87 °C and M{sub f} = 18.93 °C) by comparing with that of SLM-fabricated equi-atomic NiTi alloy, which could be attributed to the compensation of Ni{sub 4}Ti{sub 3} precipitates for the effect of an addition of TiC particles. Three different Ni{sub 4}Ti{sub 3} precipitate variants ((111){sub R}//(1 1-bar 1-bar ){sub B2}, (111){sub R}//( 1-bar 1-bar 1){sub B2}, and (111){sub R}//( 1-bar 1 1-bar ){sub B2}) with various precipitate diameters were observed within SLM fabricated part, showing apparently selective growth behavior. By high-resolution transmission electron microscopy, severe lattice defects formed surrounding the smaller variant, while relatively intact lattice structure was found around the larger one, which indicated that high strain energy was produced in the interface between the matrix and the smaller variant. Furthermore, finite element simulation method was applied to disclose the evolution features of complicated cyclic stress during SLM processing of TiC/NiTi composites. By predicting, the main constraint mode within as-fabricated track was tensile stress effect. Based on the redistribution behavior of thermal stress and the coupling effect between the thermal stress and strain field induced by Ni{sub 4}Ti{sub 3} precipitate, the selective growth mechanism of Ni{sub 4}Ti{sub 3} variant was revealed.

36 MATERIALS SCIENCE↗

Mapping 3D grain and precipitate structure during in situ mechanical testing of open-cell metal foam using micro-computed tomography and high-energy X-ray diffraction microscopy

Open-cell metal foams are ultra-low-density cellular metals with complex hierarchical structures that span bulk, cell, ligament, and sub-ligament scales and give rise to desirable properties such as high strength-to-weight ratio and excellent energy absorption. Although literature suggests that intrinsic material structures at sub-ligament length scales (e.g., grains and precipitates) play an important role in mechanical behavior of open-cell metal foams, there are very few experimental measurements of such structures in three dimensions and for meaningful volumes of foam. This study seeks to map and track the three-dimensional (3D) grain and precipitate structures of an intact volume of open-cell aluminum foam by advancing microstructural characterization techniques that leverage X-ray micro-computed tomography (μCT) and far-field high-energy X-ray diffraction microscopy (FF-HEDM). A 6%-relative-density aluminum foam sample was mechanically tested in compression while μCT and FF-HEDM measurements were collected at interrupted loading states at beamline 1-ID of the Advanced Photon Source. Further, a new scanning strategy and reconstruction algorithm were established to enable characterization of a foam volume with diameter approximately four times wider than the nominal width of the X-ray beam. The result is a set of maps that detail both the 3D grain and precipitate structures throughout the foam volume at successive strain steps. A novel grain tracking procedure was developed to track individual grains within the foam volume by accounting for the large rigid-body motions that individual ligaments can undergo during mechanical loading. The ability to track grains and precipitate structures in three dimensions throughout large bulk deformation of ultra-low-density polycrystalline materials enables new possibilities for validating numerical models and investigating local failure mechanisms. Furthermore, the methods and procedures developed in this study could be applied to other ultra-low-density structures, such as additively manufactured lattices.

36 MATERIALS SCIENCE↗

A novel synthesis of micrometer silica hollow sphere

Silica microcapsules (hollow spheres) were synthesized successfully by a novel CTAB-stabilized water/oil emulsion system mediated hydrothermal method. The addition of urea to a solution of aqueous phase was an essential step of the simple synthetic procedure of silica hollow spheres, which leads to the formation of silica hollow spheres with smooth shell during hydrothermal process. The intact hollow spheres were obtained by washing the as-synthesized solid products with distilled water to remove the organic components. A large amount of silanol groups were retained in the hollow spheres by this facile route without calcination. The morphologies and optical properties of the product were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy. Furthermore, on the basis of a series of SEM observations, phenomenological elucidation of a mechanism for the growth of the silica hollow spheres has been presented.

36 MATERIALS SCIENCE↗

Synthesis of high-silica offretite by the interzeolite conversion method

High-silica offretite (Si/Al = 7.6-8.0) with no or very little amount of erionite was successfully obtained by the interzeolite conversion of faujasite used as a starting material in the presence of both benzyltrimethylammonium hydroxide and the structure-forming alkali metal cations such as Li{sup +} and Na{sup +}. Hydrothermal conversion of faujasite into offretite depended on the Si/Al ratio of the starting faujasite. Only faujasite with Si/Al ratio of 16-31 was converted into offretite. In this conversion, offretite was obtained in 1 day, indicating that the crystallization rate was enhanced by using faujasite as the starting material. Based on {sup 13}C CP/MAS NMR measurements, most of benzyltrimethylammonium cations were presented intact within zeolitic pores of the obtained offretite. As offretite was not obtained from amorphous materials (amorphous SiO{sub 2} and {gamma}-Al{sub 2}O{sub 3} or Al(OH){sub 3}), the advantage of the interzeolite conversion was demonstrated.

36 MATERIALS SCIENCE↗

Synthesis, deposition and characterization of magnesium hydroxide nanostructures on zeolite 4A

Research highlights: {yields} Reports a simple precipitation-growth method to produce nanostructures of Mg(OH){sub 2} on the surface of zeolite 4A. {yields} Able to control the growth of the nanostructures by manipulating the experimental procedure. {yields} Able to deposit Mg(OH){sub 2} onto specific sites namely bridging hydroxyl protons (SiOHAl) on the surface of zeolite 4A. -- Abstract: The precipitation and self-assembly of magnesium hydroxide Mg(OH){sub 2} nanopetals on dispersed zeolite 4A particles was investigated. Mg(OH){sub 2}/zeolite nanocomposites were produced from magnesium chloride solutions and characterized via X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared analysis (FTIR), and solid state NMR. It was determined that Mg(OH){sub 2} interacted with bridging hydroxyl protons (SiOHAl) on the zeolite surface, but not with silanol or aluminol groups. NMR analysis showed that 13% of the tetrahedral Al sites on the zeolite were converted to octahedral Al. The zeolite structure and crystallinity remained intact after treatment, and no dealumination reactions were detected. This suggests that the deposition-precipitation process at ambient conditions is a facile method for controlling Mg(OH){sub 2} nanostructures on zeolites.

36 MATERIALS SCIENCE↗

Soft chemical synthesis of Ag{sub 3}SbS{sub 3} with efficient and recyclable visible light photocatalytic properties

Highlights: • Highly crystalline Ag{sub 3}SbS{sub 3} synthesized using soft chemical approach. • First time report of photocatalytic activity of Ag{sub 3}SbS{sub 3}. • Ag{sub 3}SbS{sub 3} degraded the harmful organic dyes rapidly under visible radiation. • Pseudo first order kinetics have been followed in these sets of reactions. • Up to 90% of Methylene Blue degraded even after 4th cycle of catalyst reuse. • Structure of catalyst is intact after reuse. • As the catalyst is heavy, its separation after use is quite simple. - Abstract: Application of Ag{sub 3}SbS{sub 3}, obtained by soft chemical approach involving rapid reaction of air stable metal–thiourea complexes in ethylene glycol medium, as visible light photocatalyst for the degradation of dye solutions was investigated. Ag{sub 3}SbS{sub 3} was confirmed by high resolution powder X-ray diffraction pattern and its no defined morphology was present in SEM images. From UV–vis spectroscopy measurements, optical band gap of 1.77 eV was deduced for Ag{sub 3}SbS{sub 3}. Rapid degradation kinetics and recyclability was exhibited by Ag{sub 3}SbS{sub 3} towards Methylene Blue, Methyl Orange, Malachite Green, and Rhodamine 6G dye solutions under visible radiation. All these processes followed pseudo first order kinetics. High surface area (6.39 m{sup 2}/g), with mesopores (3.81 nm), arising from solvent mediated synthesis of Ag{sub 3}SbS{sub 3} has been correlated to its catalytic activity.

36 MATERIALS SCIENCE↗

Wettability, structural and optical properties investigation of TiO{sub 2} nanotubular arrays

Graphical abstract: FESEM images of the TiO 2 nanotube layers formed at 0.5 wt% NH4F/ glycerol. - Highlights: • Structural property investigation of TiO{sub 2} nanotube. • Evaluation of wettability of TiO{sub 2} nanotube. • Study on optical properties of TiO{sub 2} nanotube. • The effect of anatase phase on optical and wettability properties of TiO{sub 2.} - Abstract: In this study, the effect of microstructural evolution of TiO{sub 2} nanotubular arrays on wettability and optical properties was investigated. Pure titanium was deposited on silica glass by PVD magnetron sputtering technique. The Ti coated substrates were anodized in an electrolyte containing NH{sub 4}F/glycerol. The structures of the ordered anodic TiO{sub 2} nanotubes (ATNs) as long as 175 nm were studied using field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD). The result shows a sharp peak in the optical absorbance spectra around the band gap energy, 3.49–3.42 eV for annealed and non-annealed respectively. The thermal process induced growth of the grain size, which influence on the density of particles and the index of refraction. Furthermore, the wettability tests' result displays that the contact angle of intact substrate (θ = 74.7°) was decreased to 31.4° and 17.4° after anodization for amorphous and heat treated (450 °C) ANTs coated substrate, respectively.

36 MATERIALS SCIENCE↗

Influence of activation parameters on the thickness of MgO thin film on Ag-3Mg alloy and its secondary electron emission property

Highlights: • MgO films with controlled thicknesses on Ag-3Mg alloys were prepared by activation in low vacuum with oxygen. • Superior secondary electron yield was obtained for the Ag-3Mg alloy with proper thickness of MgO film. • Oxygen pressure during the activation process is crucial for obtaining good secondary electron yield for Ag-3Mg alloys. • The mechanism of secondary electron emission in MgO films is discussed. - Abstract: MgO thin films of different thicknesses were prepared on polished Ag-3wt%Mg alloy by an activation process at 500–650 °C under oxygen pressures of 0.5–10.0 Pa. The influence of the thickness of MgO film on the secondary electron yield of the Ag-3wt%Mg alloy is investigated. The alloy with an MgO film of moderate thickness of 65 ± 1 nm shows the highest secondary electron yield of 10. Oxygen pressure below 10.0 Pa is crucial for the formation of intact MgO film on the top surface. Computational simulation analysis reveals that the maximum yield occurs when the penetration depth of primary electrons is 13–18 nm less than the thickness of MgO film. Electron supply of this extra MgO film is allowed by an electron tunneling mechanism under certain bias voltage. The replenishment of new electrons to the electron deficient surface is crucial for obtaining optimized secondary electron yields for Ag-Mg alloy cathodes.

36 MATERIALS SCIENCE↗

Enhanced conduction in CdSe nanowires on 200 keV phosphorous negative ion implantation

Highlights: • CdSe nanowires were prepared by template assisted electro-deposition. • CdSe nanowires were implanted with 200 keV P{sup −} ions at different fluence. • Structure of CdSe NWs remained intact on ion implantation. • Optical band gap of CdSe NWs decreased after implantation. • The electrical conduction improved due to dominance of ionization effects. - Abstract: For II–VI compound semiconductor nanostructures, ion implantation is considered to be an area of significant interest due to its potential use in the fabrication of the extensive variety of novel optoelectric devices. CdSe nanowires with diameter 80 nm have been grown via the template-assisted electro-deposition method and were subsequently implanted with 200 keV negative phosphorous ions at fluence ranging from 10{sup 11} ions/cm{sup 2} to 10{sup 13} ions/cm{sup 2}. SRIM-TRIM simulation studies are done to understand the course and nature of events occurring during implantation. Pre- and post-implanted samples were characterized by Scanning electron microscope (SEM), X-Ray diffraction (XRD), UV–vis spectroscopy and Probe station with a Keithley source meter. Structural studies reveal no modification in crystal structure upon implantation. An increase of phosphorous content led to an apparent red shift in the optical band gap and an improvement in conductivity. These modifications are attributed to the ionization and the creation of damage on implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Proteomic Profiling of Intra-Islet Features Reveals Substructure-Specific Protein Signatures

Despite their diminutive size, islets of Langerhans play a large role in maintaining systemic energy balance in the body. New technologies have enabled us to go from studying the whole pancreas, to isolated whole islets, to partial islet sections, and now to islet substructures isolated from within the islet. Using a microfluidic nanodroplet-based proteomics platform coupled with laser capture microdissection (LCM), we present an in-depth investigation of protein profiles specific to regions within the islet. These regions studied include the vascular tissue containing interface boundary, micro-vascular tissue internal to the islet, isolated endocrine cells, islet sections with vasculature intact, and finally acinar tissue from around the islet. Unique protein signatures observed in the inner vasculature potentially indicate increased innervation and intra-islet neuron-like crosstalk compared to external vasculature. We also demonstrate the utility of these data for isolating localized structure-specific drug-target interactions using existing protein/drug binding databases.

59 BASIC BIOLOGICAL SCIENCES↗