Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interdependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The distribution of carbon monoxide and ozone in the free troposphere

The two-dimensional distributions of CO and O3 in the free troposphere during July and August, 1974, are discussed. The data confirm the previous findings that both of these gases are considerably more abundant in the northern hemisphere, but the degree of the asymmetry is somewhat different from what had been reported previously, especially for CO. When examined with respect to other available data sets, the conclusion is drawn that a pronounced seasonal cycle exists for CO in both hemispheres which may be driven by the likely seasonal cycle of the OH radical. The data also indicate that CO concentrations exhibit significant variability with height in the northern hemisphere, whereas southern hemispheric concentrations are quite constant with altitude except in cases where interhemispheric exchange of air may be occurring. A discussion on the vertical and horizontal transport processes inferred from the CO and O3 measurements is presented. The possible interdependence of the photochemical cycles of these two trace gases is also discussed.

Seiler, G.↗

The derivation of Halley parameters from observations

Nominal value model parameters for the nucleus (size, mass, rotation, albedo, hydrogen production) the dust and gas for P/Halley at 0.9 AU postperihelion are derived from the light curve and spectra of Halley and by modeling the effect of the nongravitational forces, e.g., the outgassing rocket type effect of the nucleus. In those cases where Halley observations are not sufficient, the average value derived from a larger set of other comets is used, or data from comet Bennett, Halley's best analog, are taken. A flow diagram shows how the parameter values are derived and to what extent these derived values are interdependent.

Newburn, R. L.↗

Aircraft turbofan noise

Turbofan noise generation and suppression in aircraft engines are reviewed. The chain of physical processes which connect unsteady flow interactions with fan blades to far field noise is addressed. Mechanism identification and description, duct propagation, radiation and acoustic suppression are discussed. The experimental technique of fan inflow static tests are discussed. Rotor blade surface pressure and wake velocity measurements aid in the determination of the types and strengths of the generation mechanisms. Approaches to predicting or measuring acoustic mode content, optimizing treatment impedance to maximize attenuation, translating impedance into porous wall structure and interpreting far field directivity patterns are illustrated by comparisons of analytical and experimental results. The interdependence of source and acoustic treatment design to minimize far field noise is emphasized. Area requiring further research are discussed and the relevance of aircraft turbofan results to quieting other turbomachinery installations is addressed.

Groeneweg, J. F.↗

Evaluation of SIR-A space radar for geologic interpretation: United States, Panama, Colombia, and New Guinea

Comparisons between LANDSAT MSS imagery, and aircraft and space radar imagery from different geologic environments in the United States, Panama, Colombia, and New Guinea demonstrate the interdependence of radar system geometry and terrain configuration for optimum retrieval of geologic information. Illustrations suggest that in the case of space radars (SIR-A in particular), the ability to acquire multiple look-angle/look-direction radar images of a given area is more valuable for landform mapping than further improvements in spatial resolution. Radar look-angle is concluded to be one of the most important system parameters of a space radar designed to be used for geologic reconnaissance mapping. The optimum set of system parameters must be determined for imaging different classes of landform features and tailoring the look-angle to local topography.

Macdonald, H.↗

Solar Terrestrial Observatory for future space station program

The Solar Terrestrial Observatory (STO) Science Study Group was established in 1979 to formulate a scientific strategy for the development of a Solar Terrestrial Observatory as an interdependent problem-oriented combination of solar, magnetospheric, and atmospheric instruments. In the scenario formed by the STO Science Study Group, the STO would be mounted on a long-lived Space Platform, carried into orbit, and serviced by the Space Shuttle. The proposed strategy focused on investigations of the physical processes that interlink the major regions of solar-terrestrial space. In reviewing that strategy, one quickly concludes that the STO objectives can be met, and in many ways enhanced, by using a Shuttle-serviced manned Space Station. This conclusion is reinforced by the results of earlier workshops devoted to manned Space Stations.

Roberts, W. T.↗

The derivation of Halley parameters from observations

Nominal value model parameters for the nucleus (size, mass, rotation, albedo, hydrogen production) the dust and gas for P/Halley at 0.9 AU postperihelion are derived from the light curve and spectra of Halley and by modeling the effect of the nongravitational forces, e.g., the outgassing rocket type effect of the nucleus. In those cases where Halley observations are not sufficient, the average value derived from a larger set of other comets is used, or data from comet Bennett, Halley's best analog, are taken. A flow diagram shows how the parameter values are derived and to what extent these derived values are interdependent. Previously announced in STAR as N82-23097

Newburn, R. L.↗

Restructurable controls for aircraft

Future aircraft with highly sophisticated controls are likely to have multiple interdependent failure modes which will be difficult for the pilot to recognize. Such failures may lead to unanticipated sequences of events from which the pilot cannot intuitively recover. Advances in the state-of-the-art in failure detection, failure identification, and control system technology suggest it may be feasible to detect and identify potentially catastrophic failures in flight controls and to restructure the controls in real time to execute a safe landing. Two accidents are reviewed, one in which the pilot successfully restructured the controls and one in which he did not, but for which a solution existed. The problem requirements and potential theoretical techniques which apply are also discussed.

Howell, W. E.↗

Space shuttle launch vehicle aerodynamic uncertainties: Lessons learned

The chronological development and evolution of an uncertainties model which defines the complex interdependency and interaction of the individual Space Shuttle element and component uncertainties for the launch vehicle are presented. Emphasis is placed on user requirements which dictated certain concessions, simplifications, and assumptions in the analytical model. The use of the uncertainty model in the vehicle design process and flight planning support is discussed. The terminology and justification associated with tolerances as opposed to variations are also presented. Comparisons of and conclusions drawn from flight minus predicted data and uncertainties are given. Lessons learned from the Space Shuttle program concerning aerodynamic uncertainties are examined.

Hamilton, J. T.↗

Characteristics of the MSFC, PDS microdensitometer

The results of several parametric studies carried out on the Marshall Space Flight Center (MSFC) Photometric Data System PDS-10 microdensitometer are summarized for the purposes of documenting the operation and limitations of the system for inhouse research and to provide a bench mark for comparison with other microdensitometers. The results are grouped into four general areas. These are: (1) system overall stability to drift, (2) photometric linearity and noise, (3) reproducibility, and (4) scanning performance. Test data taken in order to evaluate the interdependency of scan speed, noise and position are included. Shown also are results of tests for system stability, reproducibility, stray light and PMT settling time.

Fountain, W. F.↗

Evaluation and development of new VAS remote sensing algorithms

An algorithm, developed to permit the simultaneous retrieval of temperature/moisture profiles and surface skin temperature by direct analytical solution of the radiative transfer equation, alleviates the problem associated with the interdependencies of water vapor retrieval on temperature retrieval and their dependencies on surface emissions. Simultaneous solution of all these quantities is achieved in one calculation using the available radiance observations. Since only a single matrix inversion is required for the specification of all parameters, the solution is computationally efficient. Ancillary observations of temperature and/or moisture from surface sensors on aircraft can be readily incorporated into the solution. Simulation tests of the method indicate improved performance over the previous iterative technique, particularly for the lower troposphere and for water vapor.

Smith, W. L.↗

Sensitivity analysis of limit state functions for probability-based plastic design

The evaluation of the total probability of a plastic collapse failure P sub f for a highly redundant structure of random interdependent plastic moments acted on by random interdepedent loads is a difficult and computationally very costly process. The evaluation of reasonable bounds to this probability requires the use of second moment algebra which involves man statistical parameters. A computer program which selects the best strategy for minimizing the interval between upper and lower bounds of P sub f is now in its final stage of development. The relative importance of various uncertainties involved in the computational process on the resulting bounds of P sub f, sensitivity is analyzed. Response sensitivities for both mode and system reliability of an ideal plastic portal frame are shown.

Frangopol, D. M.↗

STARS: A general-purpose finite element computer program for analysis of engineering structures

STARS (Structural Analysis Routines) is primarily an interactive, graphics-oriented, finite-element computer program for analyzing the static, stability, free vibration, and dynamic responses of damped and undamped structures, including rotating systems. The element library consists of one-dimensional (1-D) line elements, two-dimensional (2-D) triangular and quadrilateral shell elements, and three-dimensional (3-D) tetrahedral and hexahedral solid elements. These elements enable the solution of structural problems that include truss, beam, space frame, plane, plate, shell, and solid structures, or any combination thereof. Zero, finite, and interdependent deflection boundary conditions can be implemented by the program. The associated dynamic response analysis capability provides for initial deformation and velocity inputs, whereas the transient excitation may be either forces or accelerations. An effective in-core or out-of-core solution strategy is automatically employed by the program, depending on the size of the problem. Data input may be at random within a data set, and the program offers certain automatic data-generation features. Input data are formatted as an optimal combination of free and fixed formats. Interactive graphics capabilities enable convenient display of nodal deformations, mode shapes, and element stresses.

Gupta, K. K.↗

Precedency control and other semantic integrity issues in a workbench database

Most database systems model the current state of a system of real world discrete and simple entities together with their relationships. By examining instead a database system that is a workbench and models more complicated entities, a fresh perspective is gained. Specifically, semantic integrity is analysed. Four aspects distinct from physical integrity are identified, namely - access, failure, concurrency and precedency. Access control is shown to be the consequence of semantic interdependency between data and its matching semantic routines. Failure, concurrency precedency controls are concerned with preventing processes interfering with each other. Precedency is a new concept in the database context. It expresses a constraint between processes that act on the database. As processes create, update and delete entities they in general obey a partial ordering imposed by the semantics of their actions. Precedency control ensures that data remains consistent with respect to this partial order.

Dampney, C. N. G.↗

Research and development activities in unified control-structure modeling and design

Results of work to develop a unified control/structures modeling and design capability for large space structures modeling are presented. Recent analytical results are presented to demonstrate the significant interdependence between structural and control properties. A new design methodology is suggested in which the structure, material properties, dynamic model and control design are all optimized simultaneously. Parallel research done by other researchers is reviewed. The development of a methodology for global design optimization is recommended as a long-term goal. It is suggested that this methodology should be incorporated into computer aided engineering programs, which eventually will be supplemented by an expert system to aid design optimization.

Nayak, A. P.↗

Research and development activities in unified control-structure modeling and design

Results of work sponsored by JPL and other organizations to develop a unified control/structures modeling and design capability for large space structures is presented. Recent analytical results are presented to demonstrate the significant interdependence between structural and control properties. A new design methodology is suggested in which the structure, material properties, dynamic model and control design are all optimized simultaneously. The development of a methodology for global design optimization is recommended as a long term goal. It is suggested that this methodology should be incorporated into computer aided engineering programs, which eventually will be supplemented by an expert system to aid design optimization. Recommendations are also presented for near term research activities at JPL. The key recommendation is to continue the development of integrated dynamic modeling/control design techniques, with special attention given to the development of structural models specially tailored to support design.

Nayak, A. P.↗

Productivity issues at organizational interfaces

The need for close interdependence between large numbers of diverse and specialized work groups makes the Space Program extremely vulnerable to loss of productivity at organizational interfaces. Trends within the program also suggest that the number and diversity of interfaces will grow in the near term. Continued maintenance of R&D excellence will require that interface performance issues be included in any future productivity improvement effort. The types and characteristics of organizational interfaces are briefly presented, followed by a review of factors which impact their productivity. Approaches to assessing and improving interface effectiveness are also discussed.

Holland, A. W.↗

Nitrogen uptake and utilization by intact plants

The results of experiments support the proposed conceptual model that relates nitrogen uptake activity by plants as a balanced interdependence between the carbon-supplying function of the shoot and the nitrogen-supplying function of the roots. The data are being used to modify a dynamic simulation of plant growth, which presently describes carbon flows through the plant, to describe nitrogen uptake and assimilation within the plant system. Although several models have been proposed to predict nitrogen uptake and partitioning, they emphasize root characteristics affecting nutrient uptake and relay on empirical methods to describe the relationship between nitrogen and carbon flows within the plant. Researchers, on the other hand, propose to continue to attempt a mechanistic solution in which the effects of environment on nitrogen (as well as carbon) assimilation are incorporated through their direct effects on photosynthesis, respiration, and aging processes.

Raper, C. D., Jr.↗

Atmospheric CH4, CO and OH from 1860 to 1985

Studies have shown that atmospheric methane, CO and the gaseous OH radical are interdependent: if CH4, CO or OH is perturbed, background concentrations of the other two constituents are affected. Perturbations to OH alter photooxidation rates of numerous natural and anthropogenic trace gases and affect lifetimes of those species that pass from the earth's surface to the free troposphere and stratosphere. It is now known that global atmospheric methane concentrations are increasing; less definite data suggest that carbon monoxide is also increasing. Even before the measurements reported in nine literature references, modeling studies of CH4-CO-OH coupling had led to predictions (Chameides, Liu and Ciceronne, 1977; Sze, 1977; and Hameed, Pinto and Stewart 1979) of future increases of CH4 and CO. A photochemical model is used to look backwards in time by simulating the trace-gas composition of the unpolluted troposphere at the start of the industrial era (taken as 1860) and at intervals up to 1985. It is found that the OH concentration in the background troposphere has decreased significantly and O3 has increased due to increases of CH4 and CO; calculated changes depend on temporal trends of NOx (NOx = NO + NO2), for which no historical data are available. The calculations allow recent trace-gas trends affecting background chemistry and climate to be viewed in a longer-term context.

Thompson, A. M.↗