Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Oxygen Ion Conductance in Epitaxially Grown Thin Film Electrolytes

This paper briefly summarizes the results from a project aimed to develop an understanding of oxygen ionic transport processes in highly oriented thin film oxide materials to enable the design of new types of electrolyte materials for solid state electrochemical devices. We have used oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE) to grow highly oriented doped ceria, zriconia thin films on single crystal c-Al2O3 along with multilayered hetero-structures. The influence of dopant concentration, interfaces, defects and crystalline quality on oxygen ionic conductivity has been critically analyzed using various surface and bulk sensitive capabilities. Although, preferred (111) orientation was preserved in high quality samaria doped ceria films up to a 10 atom% Sm doping, the films started to show polycrystalline features for higher Sm doping. Maximum conductivity was obtained for 5 atom% Sm doping in ceria. In the case of gadolinia doped ceria/zirconia multi-layer films, total conductivity was found to increase with the increasing number of layers.

30 DIRECT ENERGY CONVERSION↗

Effect of sodium to barium substitution on the space charge implementation in thermally poled glasses for nonlinear optical applications

Thermally poled niobium borophosphate glasses in the system 0.55(0.95-y) NaPO{sub 3}+y/2 Ba(PO{sub 3}){sub 2}+0.05Na{sub 2}B{sub 4}O{sub 7})+0.45Nb{sub 2}O{sub 5} were investigated for second order optical nonlinear (SON) properties. Bulk glasses were studied by Raman spectroscopy, thermal analysis, optical and dielectric measurements. The sodium to barium substitution does not lead to significant changes in optical properties, crystallization of glasses and coordination environment of polarizable niobium atoms. However, the ionic conductivity decreases drastically with the increase of barium concentration. Secondary ion mass spectroscopy has been used to determine the element distribution in the anode layer of the thermally poled glasses. The second order optical susceptibilities gradually decrease from chi{sup (2)}=2.8 pm/V to zero with the increase of barium content. Using a simple electrical model, variations of nonlinear optical responses have been correlated with dielectric characteristics. - Graphical abstract: The sodium to barium substitution strongly influences the space charge implementation (E{sub int}) at the anode side of the poled glass and thus its nonlinear optical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low dielectric loss and non-Debye relaxation of gamma-Y{sub 2}Si{sub 2}O{sub 7} ceramic at elevated temperature in X-band

Bulk single-phase gamma-Y{sub 2}Si{sub 2}O{sub 7} ceramic has been synthesized from a mixture of Y{sub 2}O{sub 3} powder and SiO{sub 2} nanopowder at 1400 deg. C. The dielectric properties are reported at the temperature ranging from room temperature to 1400 deg. C in X-band. The results show that gamma-Y{sub 2}Si{sub 2}O{sub 7} exhibits low dielectric loss and non-Debye relaxation behavior different from that of SiO{sub 2}. The peculiar relaxation peak is attributed to the structural relaxation polarization caused by thermal-excitation structural defects, which implies that no ionic conductance exists in this material. Such low dielectric loss will draw much attention for potential dielectric applications at high temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Conductance of Ion Channels - Theory vs. Experiment

Transmembrane ion channels mediate a number of essential physiological processes in a cell ranging from regulating osmotic pressure to transmission of neural signals. Kinetics and selectivity of ion transport is of critical importance to a cell and, not surprisingly, it is a subject of numerous experimental and theoretical studies. In this presentation we will analyze in detail computer simulations of two simple channels from fungi - antiamoebin and trichotoxin. Each of these channels is made of an alpha-helical bundle of small, nongenomically synthesized peptides containing a number of rare amino acids and exhibits strong antimicrobial activity. We will focus on calculating ionic conductance defined as the ratio of ionic current through the channel to applied voltage. From molecular dynamics simulations, conductance can be calculated in at least two ways, each involving different approximations. Specifically, the current, given as the number of charges transferred through the channel per unit of time, can be obtained from the number of events in which ions cross the channel during the simulation. This method works well for large currents (high conductance values and/or applied voltages). If the number of crossing events is small, reliable estimates of current are difficult to achieve. Alternatively, conductance can be estimated assuming that ion transport can be well approximated as diffusion in the external potential given by the free energy profile. Then, the current can be calculated by solving the one-dimensional diffusion equation in this external potential and applied voltage (the generalized Nernst-Planck equation). To do so three ingredients are needed: the free energy profile, the position-dependent diffusion coefficient and the diffusive flux of ions into the channel. All these quantities can be obtained from molecular dynamics simulations. An important advantage of this method is that it can be used equally well to estimating large and small currents. In addition, once the free energy profile becomes available the full current-voltage dependence can be readily obtained. For both channels we carried out calculations using both approaches. We also tested the main assumptions underlying the diffusive model, such as uncorrelated nature of individual crossing events and Fickian diffusion. The accuracy and consistency of different methods will be discussed. Finally we will discuss how comparisons between calculated and measured ionic conductance and selectivity of transport can be used for determining structural models of the channels.

Pohorille, Andrew↗

Exploring the Role of Humidity, Temperature, and Mixed Ionic and Electronic Conductivity on SOFC Anode Electrocatalysis

Infiltration of nanoscale electrocatalysts into Ni/yttria-stabilized zirconia (Ni-YSZ) cermets has been shown to improve the electrochemical performance of solid oxide fuel cell (SOFC) anodes. While infiltrated electrodes in SOFCs result in improved cell performance, long-term operation leads to coarsening of the infiltrated nanoparticles and negates the short-term performance improvements. This study explores the roles of humidity, temperature, and number of cycles of nanocatalyst infiltration in improving mixed conduction within the Ni-YSZ electrode. Two mixed conduction phases were studied: Gd 0.1 Ce 0.9 O 2-δ (GDC) as an infiltrant into Ni-YSZ electrodes, and Ni/transition metal doped-YSZ electrodes infiltrated with Ni. Analysis of impedance data from these cells shows improved electrochemical performance in infiltrated cells with mixed conduction compared with infiltrated cells containing purely ionic and electronic conducting phases. Improved anode performance is attributed to the availability of electronic pathways through predominantly ionic-conducting phases to connect distant Ni nanoparticles and/or Ni grains.

25 ENERGY STORAGE↗

Thermoelectric properties and impedance spectroscopy of polycrystalline samples of the beta-gallia rutile intergrowth, (Ga,In){sub 4}(Sn,Ti){sub 5}O{sub 16}

Polycrystalline samples of Ga{sub 3}In(Sn{sub 1-y}Ti{sub y}){sub 5}O{sub 16}, y{<=}0.3 were prepared by solid-state synthesis and characterized to determine their optical properties, thermoelectric properties and electrical impedance. Using diffuse reflectance data and assuming a direct band gap, the band gap of the material ranges from 3.58 eV for y=0 to 3.74 eV for y=0.2. The dc conductivity decreased with increasing Ti content and was thermally activated, ranging from {<=}10{sup -5} S/cm at 300 Degree-Sign C to 0.03 S/cm at 1000 Degree-Sign C for Ga{sub 3}InSn{sub 5}O{sub 16}. The Seebeck coefficient was negative indicating n-type conduction. The activation energies for dc conduction and thermopower were similar, ranging from 1.4{+-}0.1 eV for y=0 to 1.8{+-}0.2 eV for y=0.2, suggesting band conduction. The thermal conductivity of Ga{sub 3}InSn{sub 5}O{sub 16} ranged from 1.1 W/m K at 500 {sup o}C to 0.75 W/m K at 800 Degree-Sign C. The highest figure of merit measured was 2 Multiplication-Sign 10{sup -4} at {approx}900 Degree-Sign C, which is much lower than desired for thermoelectric materials. A comparison of dc conductivity and impedance data indicated a substantial ionic contribution for samples containing titanium. - Graphical abstract: The thermoelectric properties of polycrystalline Ga{sub 3}In(Sn{sub 1-y}Ti{sub y}){sub 5}O{sub 16}, y{<=}0.3 were measured in air at 300-900 Degree-Sign C. The materials are broad-band n-type semiconductors with non-negligible ionic conduction for samples prepared with y>0. The thermoelectric figure of merit is much lower than desired for practical thermoelectric devices. Highlights: Black-Right-Pointing-Pointer Ga{sub 3}In(Sn{sub 1-y}Ti{sub y}){sub 5}O{sub 16}, y{<=}0.2 is a broad-band n-type semiconductor. Black-Right-Pointing-Pointer The conductivity of Ti-containing samples show evidence of an ionic as well as an electronic contribution. Black-Right-Pointing-Pointer The thermal conductivity of polycrystalline Ga{sub 3}In(Sn{sub 1-y}Ti{sub y}){sub 5}O{sub 16} decreases with increasing temperature. Black-Right-Pointing-Pointer The thermoelectric figure of merit for Ga{sub 3}In(Sn{sub 1-y}Ti{sub y}){sub 5}O{sub 16} is lower than desired for practical thermoelectric devices.

36 MATERIALS SCIENCE↗

Surface Reconstruction Limited Conductivity in Block-Copolymer Li Battery Electrolytes

Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block-copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the electrode surface has an important effect on impedance measurements, despite its negligible extent compared to the bulk electrolyte. Using standard stainless steel blocking electrodes, the impedance of lithium salt-doped poly(isoprene-b-styrene-b-ethylene oxide) (ISO) exhibits a marked decrease upon thermal processing of the electrolyte. In contrast, covering the electrode surface with a low molecular weight poly(ethylene oxide) (PEO) brush results in higher and more reproducible conductivity values, which are insensitive to the thermal history of the device. A qualitative model of this effect is based on the hypothesis that ISO surface reconstruction at the different electrode surfaces leads to a change in the electrostatic double layer, affecting electrochemical impedance spectroscopy measurements. As a main result, PEO-brush modification of electrode surfaces is beneficial for the robust electrolyte performance of PEO-containing block-copolymers and may be crucial for their accurate characterization and use in Li-ion batteries.

block-copolymer electrolytes↗

Carbon nanotube-chalcogenide glass composite

This article describes the preparation of multi-walled carbon nanotube-chalcogenide glass composite by direct synthesis and the melt-quenching method. The carbon nanotubes-chalcogenide glass composite was characterized by high-resolution transmission electron microscopy (HRTEM), TEM/energy-dispersive X-ray spectroscopy, low energy electron excited X-ray spectroscopy, Raman spectroscopy, spectroscopic ellipsometry, microhardness, and impedance spectroscopy. CNTs-AgAsS{sub 2} glass composite possess highly increased ionic conductivity, from {sigma}{sub 25} deg. C=4.38+-0.0438x10{sup -6} to {sigma}{sub 25} deg. C=6.57+-0.0657x10{sup -6} S cm{sup -1} and decreased refractive index from n=2.652 to 2.631 at the wavelength {lambda}=1.55 {mu}m. - Graphical abstract: Preparation of multi-walled carbon nanotube-doped chalcogenide glasses by direct synthesis and the melt-quenching method

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cu{sub 22}Bi{sub 12}S{sub 21}Cl{sub 16}-A mixed conductor with fast one-dimensional copper(I) ion transport

Melting reactions of Cu, CuCl, S, and Bi{sub 2}S{sub 3} yield black, shiny needles of Cu{sub 22(1)}Bi{sub 12}S{sub 21(1)}Cl{sub 16(1)}. The compound decomposes peritectically at 649(5) K. Oxidation state +I of the copper atoms is supported by Cu-K-XANES. The compound crystallizes in the hexagonal space group P6/m with a=2116.7(7) pm and c=395.17(5) pm. Seven anions coordinate each of the two independent bismuth cations in the shape of mono-capped trigonal prisms. These polyhedra share edges and faces to form trigonal and hexagonal tubes running along [0 0 1]. The hexagonal tubes are centered by chloride ions, which are surrounded by disordered copper cations. The majority of copper cations are distributed over numerous sites between the tubes. The Joint Probability Density Function (JPDF) reveals a continuous pathway along [0 0 1]. The high mobility of the copper cations along [0 0 1] was demonstrated by impedance spectroscopy and DC polarization measurements on single crystals. The ionic conductivity at 450 K is about {sigma}{sub ion}=0.06 S cm{sup -1}, and the activation energy for Cu{sup +} ion conduction is E{sub a}=0.44 eV. The chemical diffusion coefficient of copper is in the order of D{sub cu}{sup {delta}=}10{sup 19} cm{sup -3} at 420 K. The electronic band gap (p-type conductor) was determined as E{sub g}=0.06 eV. At room temperature the thermal conductivity of a pressed pellet is about {kappa}=0.3 W K{sup -1} m{sup -1} and the Seebeck coefficient is S=43 {mu}V K{sup -1}. -- Graphical Abstract: Copper cations easily move through the rigid tubular crystal structure of Cu{sub 22}Bi{sub 12}S{sub 21}Cl{sub 16}. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and conductivity studies of Y{sub 10-x}La{sub x}W{sub 2}O{sub 21}

The aim of this work was to determine structural parameters of the Y{sub 10-x}La{sub x}W{sub 2}O{sub 21} (x=0-10) solid solution series and investigate their electric properties. Crystallographic data shows a gradual increase in symmetry with increasing La content, as the structure evolves from orthorhombic, Y{sub 10}W{sub 2}O{sub 21}, towards the pseudo-cubic structure of Y{sub 5}La{sub 5}W{sub 2}O{sub 21}. The solubility limit of La{sub 2}O{sub 3} was found to be 50% (x=5). Above this level two phases were observed, La{sub 6}W{sub 2}O{sub 15} and (La,Y){sub 10+x}W{sub 2-x}O{sub 21-{delta}}. The conductivity of Y rich samples was very low, with sigma of the order 2x10{sup -5}-5x10{sup -5} S cm{sup -1} at 1000 deg. C, whilst ionic conductivity was observed for most La rich doped samples. The highest conductivity was observed for La{sub 10}W{sub 2}O{sub 21} and its doped analogues, at 1x10{sup -3}-5x10{sup -3} S cm{sup -1} at 1000 deg. C. Unit cell parameters were determined as a function of temperature from 0 to 1000deg. C, and thermal expansion of these materials was determined from temperature studies carried out at the Australian Synchrotron facility in Melbourne, Victoria, Australia. - Graphical abstract: The solubility limit of La{sub 2}O{sub 3} in Y{sub 10}W{sub 2}O{sub 21} was found to be >50% after which the structure was found to change to Weberite type structure, A' A''B' B''O{sub 7} that is closely related to the pyrochlore.

36 MATERIALS SCIENCE↗

Balancing Ionic and Electronic Conduction for High‐Performance Organic Electrochemical Transistors

Abstract Conjugated polymers that support mixed (electronic and ionic) conduction are in demand for applications spanning from bioelectronics to energy harvesting and storage. To design polymer mixed conductors for high‐performance electrochemical devices, relationships between the chemical structure, charge transport, and morphology must be established. A polymer series bearing the same p‐type conjugated backbone with increasing percentage of hydrophilic, ethylene glycol side chains is synthesized, and their performance in aqueous electrolyte gated organic electrochemical transistors (OECTs) is studied. By using device physics principles and electrochemical analyses, a direct relationship is found between the OECT performance and the balanced mixed conduction. While hydrophilic side chains are required to facilitate ion transport—thus enabling OECT operation—swelling of the polymer is not de facto beneficial for balancing mixed conduction. It is shown that heterogeneous water uptake disrupts the electronic conductivity of the film, leading to OECTs with lower transconductance and slower response times. The combination of in situ electrochemical and structural techniques shown here contributes to the establishment of the structure–property relations necessary to improve the performance of polymer mixed conductors and subsequently of OECTs.

Savva, Achilleas↗

Consequences of Ca multisite occupation for the conducting properties of BaTiO{sub 3}

In combination with the dielectric modulus formalism and theoretical calculations, a newly developed defect incorporation mode, which is a combination of the standard A- and B-site doping mechanisms, is used to explain the conducting properties in 5 mol% Ca-doped BaTiO{sub 3}. Simulation results for Ca solution energies in the BaTiO{sub 3} lattice show that the new oxygen vacancy inducing mixed mode exhibits low defect energies. A reduction in dc conductivity compared with undoped BaTiO{sub 3} is witnessed for the incorporation of Ca. The conducting properties of 5 mol% Ca-doped BaTiO{sub 3} are analyzed using molecular dynamics and impedance spectroscopy. The ionic conductivity activation energies for each incorporation mode are calculated and good agreement with experimental data for oxygen migration is observed. The likely existence of the proposed defect configuration is also analyzed on the basis of these methods. - Graphical abstract: Oxygen vacancy formation as a result of self-compensation in Ca-doped BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

On the molecular correlations that result in field-dependent conductivities in electrolyte solutions

Employing recent advances in response theory and nonequilibrium ensemble reweighting, we study the dynamic and static correlations that give rise to an electric field-dependent ionic conductivity in electrolyte solutions. We consider solutions modeled with both implicit and explicit solvents, with different dielectric properties, and at multiple concentrations. Implicit solvent models at low concentrations and small dielectric constants exhibit strongly field-dependent conductivities. We compare these results to Onsager-Wilson theory of the Wien effect, which provides a qualitatively consistent prediction at low concentrations and high static dielectric constants but is inconsistent away from these regimes. The origin of the discrepancy is found to be increased ion correlations under these conditions. Explicit solvent effects act to suppress nonlinear responses, yielding a weakly field-dependent conductivity over the range of physically realizable field strengths. By decomposing the relevant time correlation functions, we find that the insensitivity of the conductivity to the field results from the persistent frictional forces on the ions from the solvent. Our findings illustrate the utility of nonequilibrium response theory in rationalizing nonlinear transport behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed oxides of sodium, antimony (5+) and divalent metals (Ni, Co, Zn or Mg)

A family of alpha-NaFeO{sub 2}-type oxides Na{sub x}M{sub (1+x)/3}Sb{sub (2-x)/3}O{sub 2} (M=Ni, Co, Zn, Mg; x{approx}0.8 or 0.9) has been prepared by solid state reactions and characterized by powder XRD. At x=1, ordering occurs with tripling the unit cells and formula units. The powder patterns for Na{sub 3}M{sub 2}SbO{sub 6} (M=Ni, Co) comply with both trigonal P3{sub 1}12 cell and monoclinic C2/m cell. The Ni compound exhibits also a series of extremely weak reflections (I<0.3%) that need doubling of the c axis, and the final cell is C2/c, a=5.3048(3), b=9.1879(4), c=10.8356(7), beta=99.390(5). These ambiguities are explained by stacking faults. The compounds absorb atmospheric moisture with c-axis expansion up to 29%. A delafossite-related superlattice Ag{sub 3}Co{sub 2}SbO{sub 6} has been prepared by ion exchange and refined: P3{sub 1}12, a=5.3842(2), c=18.6613(10). Ionic conductivity of the Na{sub 0.8}Ni{sub 0.6}Sb{sub 0.4}O{sub 2} ceramics, 0.4 S/m at 300 deg. C, is greater than reported previously, presumably owing to the grain orientation produced by hot pressing. - Graphical abstract: It is shown that the powder patterns for Na{sub 3}M{sub 2}SbO{sub 6} (M=Ni and Co) may be equally well described by a trigonal P3{sub 1}12 cell and a monoclinic C2/m cell. In addition, the Ni compound exhibits a series of extremely weak reflections (I<0.3%) that need doubling of the monoclinic c axis, and the final cell is C2/c.

36 MATERIALS SCIENCE↗

Development of Ceramic Interconnect Materials for SOFC

Currently, acceptor-doped lanthanum chromite is the state-of-the-art ceramic interconnect material for high temperature solid oxide fuel cells (SOFCs) due to its fairly good electronic conductivity and chemical stability in both oxidizing and reducing atmospheres, and thermal compatibility with other cell components. The major challenge for acceptor-doped lanthanum chromite for SOFC interconnect applications is its inferior sintering behavior in air, which has been attributed to the development of a thin layer of Cr2O3 at the interparticle necks during the initial stages of sintering. In addition, lanthanum chromite is reactive with YSZ electrolyte at high temperatures, forming a highly resistive lanthanum zirconate phase (La2Zr2O7), which further complicates co-firing processes. Acceptor-doped yttrium chromite is considered to be one of the promising alternatives to acceptor-doped lanthanum chromite because it is more stable with respect to the formation of hydroxides in SOFC operating conditions, and the formation of impurity phases can be effectively avoided at co-firing temperatures. In addition, calcium-doped yttrium chromite exhibits higher mechanical strength than lanthanum chromite-based materials. The major drawback of yttrium chromite is considered to be its lower electrical conductivity than lanthanum chromite. The properties of yttrium chromites could possibly be improved and optimized by partial substitution of chromium with various transition metals. During FY10, PNNL investigated the effect of various transition metal doping on chemical stability, sintering and thermal expansion behavior, microstructure, electronic and ionic conductivity, and chemical compatibility with other cell components to develop the optimized ceramic interconnect material.

30 DIRECT ENERGY CONVERSION↗

Electrolytes - Technology review

Safety, lifetime, energy density, and costs are the key factors for battery development. This generates the need for improved cell chemistries and new, advanced battery materials. The components of an electrolyte are the solvent, in which a conducting salt and additives are dissolved. Each of them plays a specific role in the overall mechanism of a cell: the solvent provides the host medium for ionic conductivity, which originates in the conductive salt. Furthermore, additives can be used to optimize safety, performance, and cyclability. By understanding the tasks of the individual components and their optimum conditions of operation, the functionality of cells can be improved from a holistic point of view. This paper will present the most important technological features and requirements for electrolytes in lithium-ion batteries. The state-of-the-art chemistry of each component is presented, as well as different approaches for their modification. Finally, a comparison of Li-cells with lithium-based technologies currently under development is conducted.

25 ENERGY STORAGE↗

High temperature crystal structures and superionic properties of SrCl{sub 2}, SrBr{sub 2}, BaCl{sub 2} and BaBr{sub 2}

The structural properties of the binary alkaline-earth halides SrCl{sub 2}, SrBr{sub 2}, BaCl{sub 2} and BaBr{sub 2} have been investigated from ambient temperature up to close to their melting points, using the neutron powder diffraction technique. Fluorite-structured SrCl{sub 2} undergoes a gradual transition to a superionic phase at 900-1100 K, characterised by an increasing concentration of anion Frenkel defects. At a temperature of 920(3) K, the tetragonal phase of SrBr{sub 2} undergoes a first-order transition to a cubic fluorite phase. This high temperature phase shows the presence of extensive disorder within the anion sublattice, which differs from that found in superionic SrCl{sub 2}. BaCl{sub 2} and BaBr{sub 2} both adopt the cotunnite crystal structure under ambient conditions. BaCl{sub 2} undergoes a first-order structural transition at 917(5) K to a disordered fluorite-structured phase. The relationship between the (disordered) crystal structures and the ionic conductivity behaviour is discussed and the influence of the size of the mobile anion on the superionic behaviour is explored. - Graphical abstract: Anomalous behaviour of the lattice expansion of SrCl{sub 2} at temperatures of {approx}1000 K is associated with the gradual transition to a superionic phase, whilst SrBr{sub 2} undergoes a first-order structural transition ({beta}{yields}{alpha}) to a fluorite-structured superionic phase at 920(3) K. Highlights: > Anomalous behaviour of the lattice expansion of SrCl{sub 2} occurs at temperatures {approx}1000 K. > Crystal structure of {beta}-SrBr{sub 2} is described in detail. > On heating, SrBr{sub 2} and BaCl{sub 2} transform to a fluorite-structured superionic phase. > Temperature dependence of the BaCl{sub 2} and BaBr{sub 2} structures is presented. > Nature of the superionic phases within the alkaline-earth halides is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Microdomain orientation by external field

In this study, block copolymer ionomers of the cesium salt (20 mol %) of fluorinated polyisoprene-blocksulfonated polystyrene were spin cast into membranes and annealed under an electric field ofw40 V/mm at 130 C for 24 h. The effect of this treatment was a 2.5 times increase in the ionic conductivity as measured by electrochemical impedance spectroscopy, under all humidity conditions measured. This can be attributed to the increased connectivity of the ionic domains of the block copolymers. This E-field alignment technique may thus find application in the fabrication of nanostructured polyelectrolytes with enhanced charge transport capacity.

36 MATERIALS SCIENCE↗