Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIDISCIPLINARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Optimization by decomposition

An algorithm is presented for solving the structural optimization problem as a set of smaller subproblems that correspond to levels of nested substructures. In all three of the algorithm variants presented, the matching was assisted by means of the behavior and optimum sensitivity derivatives. The algorithm is noted to be intrinsically germane to distributed computing, since the subproblems can be concurrently addressed; the algorithm can also be generalized to those multidisciplinary systems whose subsystems can be arranged into a hierarchy of substructure-like dependencies.

Sobieszczanski-Sobieski, Jaroslaw↗

Applications to fixed-wing aircraft and spacecraft

Aerospace-industry applications of general-purpose structural optimization codes have not progressed as far as they might due to the lack of preprocessor capabilities. With the emergence of a new generation of graphic preprocessors that are capable of creating design models, these methods will gain acceptance. Attention is given to recent innovative applications of the Flutter and Strength Optimization Program and TSO, and the role of structural optimization in a multidisciplinary design system. Illustrative aircraft structure examples are used throughout the presentation.

Miura, Hirokazu↗

Shape optimization for aerodynamic efficiency and low observability

Field methods based on the finite-difference approximations of the time-domain Maxwell's equations and the potential-flow equation have been developed to solve the multidisciplinary problem of airfoil shaping for aerodynamic efficiency and low radar cross section (RCS). A parametric study and an optimization study employing the two analysis methods are presented to illustrate their combined capabilities. The parametric study shows that for frontal radar illumination, the RCS of an airfoil is independent of the chordwise location of maximum thickness but depends strongly on the maximum thickness, leading-edge radius, and leadingedge shape. In addition, this study shows that the RCS of an airfoil can be reduced without significant effects on its transonic aerodynamic efficiency by reducing the leading-edge radius and/or modifying the shape of the leading edge. The optimization study involves the minimization of wave drag for a non-lifting, symmetrical airfoil with constraints on the airfoil maximum thickness and monostatic RCS. This optimization study shows that the two analysis methods can be used effectively to design aerodynamically efficient airfoils with certain desired RCS characteristics.

Vinh, Hoang↗

Simulation of tail buffet using delta wing-vertical tail configuration

Computational simulation of the vertical tail buffet problem is accomplished using a delta wing-vertical tail configuration. Flow conditions are selected such that the wing primary-vortex cores experience vortex breakdown and the resulting flow interacts with the vertical tail. This multidisciplinary problem is solved successively using three sets of equations for the fluid flow, aeroelastic deflections and grid displacements. For the fluid dynamics part, the unsteady, compressible, full Navier-Stokes equations are solved accurately in time using an implicit, upwind, flux-difference splitting, finite-volume scheme. For the aeroelastic part, the aeroelastic equation for bending vibrations is solved accurately in time using the Galerkin method and the four-stage Runge-Kutta scheme. The grid for the fluid dynamics computations is updated every few time steps using a third set of interpolation equations. The computational application includes a delta wing of aspect ratio 1 and a rectangular vertical tail of aspect ratio 2, which is placed at 0.5 root-chord length downstream of the wing trailing edge. The wing angle of attack is 35 deg and the flow Mach number and Reynolds number are 0.4 and 10,000, respectively.

Kandil, Osama A.↗

Structured system engineering methodologies used to develop a nuclear thermal propulsion engine

To facilitate the development of a space nuclear thermal propulsion engine for manned flights to Mars, requirements must be established early in the technology development cycle. The long lead times for the acquisition of the engine system and nuclear test facilities demands that the engine system size, performance and safety goals be defined at the earliest possible time. These systems are highly complex and require a large multidisciplinary systems engineering team to develop and track requirements, and to ensure that the as-built system reflects the intent of the mission. A methodology has been devised which uses sophisticated computer tools to effectively develop and interpret functional requirements, and furnish these to the specification level for implementation.

Corban, R.↗

Application of dual-fuel propulsion to a single stage AMLS vehicle

As part of NASA's Advanced Manned Launch System (AMLS) study to determine a follow-on, or complement, to the Space Shuttle, a reusable single-stage-to-orbit concept utilizing dual-fuel rocket propulsion has been examined. Several dual-fuel propulsion concepts were investigated. These include: a separate engine concept combining Russian RD-170 kerosene-fueled engines with SSME-derivative engines; the kerosene and hydrogen-fueled Russian RD-701 engine concept; and a dual-fuel, dual-expander engine concept. Analysis to determine vehicle weight and size characteristics was performed using conceptual level design techniques. A response surface methodology for multidisciplinary design was utilized to optimize the dual-fuel vehicle concepts with respect to several important propulsion system and vehicle design parameters in order to achieve minimum empty weight. Comparisons were then made with a hydrogen-fueled reference, single-stage vehicle. The tools and methods employed in the analysis process are also summarized.

Lepsch, Roger A., Jr.↗

Aerodynamic control, recovery, and sensor design for a first stage flyback booster

The mission of the flyback group is to control and recover the first stage of a commercially developed winged booster launched from a B-52 at 40,000 ft and Mach 0.8. First-stage separation occurs at 210,000 ft and Mach 8.7; the second and third stages will continue deployment of their 600 lb payload into low Earth orbit. The job of the flyback group begins at this point, employing a modified control system developed to stabilize and maneuver the separated first-stage vehicle to a suitable landing site approximately 130 miles from the launch point over the Pacific Ocean. This multidisciplinary design was accomplished by four subgroups: aerodynamic design/vehicle configuration (ADVC), trajectory optimization, controls, and thermal management.

Source record↗

General purpose optimization software for engineering design

The author has developed several general purpose optimization programs over the past twenty years. The earlier programs were developed as research codes and served that purpose reasonably well. However, in taking the formal step from research to industrial application programs, several important lessons have been learned. Among these are the importance of clear documentation, immediate user support, and consistent maintenance. Most important has been the issue of providing software that gives a good, or at least acceptable, design at minimum computational cost. Here, the basic issues developing optimization software for industrial applications are outlined and issues of convergence rate, reliability, and relative minima are discussed. Considerable feedback has been received from users, and new software is being developed to respond to identified needs. The basic capabilities of this software are outlined. A major motivation for the development of commercial grade software is ease of use and flexibility, and these issues are discussed with reference to general multidisciplinary applications. It is concluded that design productivity can be significantly enhanced by the more widespread use of optimization as an everyday design tool.

Vanderplaats, G. N.↗

Optimization of rotor blades for combined structural, dynamic, and aerodynamic properties

Optimal helicopter blade design with computer-based mathematical programming has received more and more attention in recent years. Most of the research has focused on optimum dynamic characteristics of rotor blades to reduce vehicle vibration. There is also work on optimization of aerodynamic performance and on composite structural design. This research has greatly increased our understanding of helicopter optimum design in each of these aspects. Helicopter design is an inherently multidisciplinary process involving strong interactions among various disciplines which can appropriately include aerodynamics; dynamics, both flight dynamics and structural dynamics; aeroelasticity: vibrations and stability; and even acoustics. Therefore, the helicopter design process must satisfy manifold requirements related to the aforementioned diverse disciplines. In our present work, we attempt to combine several of these important effects in a unified manner. First, we design a blade with optimum aerodynamic performance by proper layout of blade planform and spanwise twist. Second, the blade is designed to have natural frequencies that are placed away from integer multiples of the rotor speed for a good dynamic characteristics. Third, the structure is made as light as possible with sufficient rotational inertia to allow for autorotational landing, with safe stress margins and flight fatigue life at each cross-section, and with aeroelastical stability and low vibrations. Finally, a unified optimization refines the solution.

He, Cheng-Jian↗

Influence of structural and aerodynamic modeling on optimization with flutter constraint

The influences of structural and aerodynamic modeling on multidisciplinary optimization in an aeroelastic environment are not well understood. Therefore, optimizations with flutter and frequency constraints were performed to investigate the effects these modeling factors have on various representative wings. To this end, the Automated Structural Optimization System (ASTROS) was used as a tool to minimize the weight of various fully built-up finite element wing models in subsonic and supersonic flow under given flutter and frequency constraints. First, the performance of the optimization module was tested against results from other codes on a straight and uniform wing widely used for optimization with flutter constraints. Then, fully built-up finite element models of various wings with different aspect ratios were investigated for the influence on the structural optimization for minimum weight of the following modeling factors: finite element selection, structural grid refinement; number of selected modes, retention of breathing modes; selection of reduced frequencies to be used in flutter analysis; aerodynamic panel size and placement; splining of the aerodynamic grid to the structural grid selection of extra points of the structural wing box for splining; and number of constraints to be retained. Knowledge of these influences as well as of the program behavior is important, since optimization can be made more efficient by the selection of reasonable initial models. Also, it was shown previously that modeling has an impact on the results of modal and aeroelastic analyses. Thus, if modeling errors can negatively affect the analyses, a minimum weight optimization can be jeopardized and result in an optimal design that is rather unreliable. In the following, selected results are presented and the influences of some modeling parameters on optimization are pointed out.

Striz, Alfred G.↗

An alternative formulation of the global sensitivity equations

To optimize the performance of any system, the sensitivity derivatives of the system's output variables with respect to its input variables must be readily available. It is also desirable that these derivatives be inexpensive to calculate as the optimization process requires many evaluations of the output variables and their derivatives. Optimization methods that have been developed for use in automated structural design programs may not be extended for use in integrated multidisciplinary design programs until adequate means of calculating accurate sensitivity derivatives of complex, internally coupled systems have been developed. Until the development of the Global Sensitivity Equations (GSE), the only method of determining the sensitivity derivatives of coupled systems has been by using finite differences. Analytical or semi-analytical derivatives do not exist as there is no analytical solution to the coupled problem. Also, difficulties arise because the finite difference method is expensive as the system has to iterate to a converged solution for each incremental input variable. The method may not be accurate, and the choice of the input variable increment may cause the difference in the output variable to be insignificant compared to computer numerical error if the choice is too small, or the process may not predict the true value of the output variable if the increment is too large. The GSE allow the system's sensitivity derivatives to be calculated as functions of the component subsystem's (local) sensitivity derivatives. These local sensitivity derivatives are calculated from specifically decoupled subsystems, whereas the GSE account for total system coupling. Since the subsystems are decoupled, it may be possible for the local derivatives to be calculated by analytical or semi-analytical methods, which generally reduce cost and improve accuracy. Several academic problems have been solved using GSE and have demonstrated encouraging results.

James, Benjamin B.↗

The Space Station: From concept to evolving reality

This review surveys the origin and conceptual evolution of the space station. It opens with U.S. President Ronald W. Reagan's announcement that one would be developed during the coming decade, continues with an assessment by the Space Science Board of the U.S. National Academy of Sciences of requirements for and potential benefits of a space station, and offers NASA's rationale for its development, construction, and utilization. The review examines early space station concepts, beginning with Edward Everell Hale's Brick Moon of 1869-1870 and going on to proposals by space pioneers Tsiolkovskii of Russia, Oberth of Germany, Noordung and von Pirquet of Austria, and others. Considerable attention is focused on designs put forward during the 1950's, 1960's, and 1970's by individuals, by NASA investigators, and by industrial and other contractors. Langley's rotating hexagon, the space base configurations, and other designs are reviewed and strategies are considered for resolving the problem of integrating a multidisciplinary research program with varying and sometimes incompatible engineering and design requirements. The article describes the power tower and dual keel configurations of the 1980's. The interdisciplinary nature of the space station is evident throughout.

Fries, Sylvia Doughty↗

International Telemedicine/Disaster Medicine Conference: Papers and Presentations

The first International Telemedicine/Disaster Medicine Conference was held in Dec. 1991. The overall purpose was to convene an international, multidisciplinary gathering of experts to discuss the emerging field of telemedicine and assess its future directions; principally the application of space technology to disaster response and management, but also to clinical medicine, remote health care, public health, and other needs. This collection is intended to acquaint the reader with recent landmark efforts in telemedicine as applied to disaster management and remote health care, the technical requirements of telemedicine systems, the application of telemedicine and telehealth in the U.S. space program, and the social and humanitarian dimensions of this area of medicine.

Source record↗

International disaster research

No existing telecommunications system can be expected to provide strategy and tactics appropriate to the complex, many faceted problem of disaster. Despite the exciting capabilities of space, communications, remote sensing, and the miracles of modern medicine, complete turnkey transfers to the disaster problem do not make the fit, and cannot be expected to do so. In 1980, a Presidential team assigned the mission of exploring disaster response within the U.S. Federal Government encountered an unanticipated obstacle: disaster was essentially undefined. In the absence of a scientifically based paradigm of disaster, there can be no measure of cost effectiveness, optimum design of manpower structure, or precise application of any technology. These problems spawned a 10-year, multidisciplinary study designed to define the origins, anatomy, and necessary management techniques for catastrophes. The design of the study necessarily reflects interests and expertise in disaster medicine, emergency medicine, telecommunications, computer communications, and forencsic sciences. This study is described.

Silverstein, Martin Elliot↗

Spacecraft COst REduction Team (SCORE): TQM/CI on a massive scale

The business of building satellites and space systems has matured. Few missions require, or can afford, excellent performance at any price. The new paradigm is doing more with less, providing quality systems at lower cost--in other words, doing our job 'Faster-Better-Cheaper.' The TRW Spacecraft COst REduction (SCORE) initiative was launched in 1990 by Daniel S. Goldin, then general manager of TRW's Space & Technology Group. The SCORE mission is to apply continuous improvement (CI) techniques to effect major reductions in the cost (our primary goal) and span time (as a corollary) required for the production of spacecraft. SCORE is a multi-year initiative that is having a profound effect on both the procedural and the cultural aspects of how we do business. The objectives of this initiative are being realized. The focus of this paper is not on the results of SCORE per se, but rather on the things we have leaned about how to do continuous improvement on a massive scale, with multilevel (hierarchical) CI teams. The following sections summarize the chronology of the SCORE initiative, from team formation to development of the year-end report for 1991. Lessons learned, the core of this presentation, are discussed--with particular focus on the unique aspects of SCORE. The SCORE initiative is continuing and, as a part of our evolving culture, will never end. It has resulted in profound insights into the way we do work and (the topic at hand) how to do CI for large and complex multidisciplinary development activities.

Bullard, Jerry D.↗

Minimum accommodation for aerobrake assembly. Phase 2: Structural concepts for a lunar transfer vehicle aerobrake which can be assembled on orbit

A multidisciplinary conceptual study was conducted to define a reusable lunar transfer vehicle (LTV) aerobrake which could be launched on a Space Shuttle of Titan 4 and assembled on orbit at Space Station Freedom. A major objective was to design an aerobrake, with integrated structure and thermal protection systems, which has a mass less than 20 percent (9040 lb) of the LTV lunar return mass. The aerobrake segmentation concepts, the structural concepts, a joint concept for assembly, and a structural design with analysis of the aerobrake are described. Results show that a 50-foot diameter LTV aerobrake can be designed for on-orbit assembly which will achieve the 20 percent mass budget.

Dorsey, John T.↗

A summary of microwave remote sensing investigations planned for BOREAS

The Boreal Ecosystem - Atmosphere Study (BOREAS) is a multidisciplinary field and remote sensing study that will be implemented jointly by the United States and Canada. The goal of BOREAS is to obtain an improved understanding of the interactions between the boreal forest biome and the atmosphere in order to clarify their roles in global change. Specific objectives are to improve the understanding of the processes that govern the exchanges of water, energy, heat, carbon, and trace gases between boreal ecosystems and the atmosphere, and to develop and validate remote sensing algorithms for transferring the understanding of these processes from local to regional scales. Two principal field sites, both within Canada, were selected. The northern site is located near Thompson, Manitoba, and the southern site encompasses Prince Albert National Park in Saskatchewan. The growing season in the northern site tends to be limited by growing-degree days while the southern site is limited by soil moisture and fire frequency. Most of the field work will occur at these two sites during 1993 and 1994 as part of six field campaigns. The first of these campaigns is scheduled for August 1993 and will involve instrument installation and an operational shakedown. Three large scale Intensive Field Campaigns (IFC's) are scheduled for 1994, along with two smaller scale Focused Field Campaigns (FFC's). The first 1994 campaign will be an FFC designed to capture the biome under completely frozen conditions during the winter. The second FFC and the first IFC are scheduled to capture the spring thaw period. Another IFC will take place in the summer during a period of maximum water stress. Finally, the third FFC will be scheduled to capture the collapse into senescence during the fall.

Mcdonald, Kyle C.↗

Progress in computational unsteady aerodynamics

After vigorous development for over twenty years, Computational Fluid Dynamics (CFD) in the field of aerospace engineering has arrived at a turning point toward maturity. This paper discusses issues related to algorithm development for the Euler/Navier Stokes equations, code validation and recent applications of CFD for unsteady aerodynamics. Algorithm development is a fundamental element for a good CFD program. Code validation tries to bridge the reliability gap between CFD and experiment. Many of the recent applications also take a multidisciplinary approach, which is a future trend for CFD applications. As computers become more affordable, CFD is expected to be a better scientific and engineering tool.

Obayashi, Shigeru↗