Search NASA⌕ Search

SEARCH · Search NASA

Results for “MicroED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Influence of gas pressure and applied voltage on Xe excimer radiation from a micro dielectric barrier discharge for plasma display panel

We present the influence of gas pressure and applied voltage on Xe excimer radiation from a microdielectric barrier discharge (micro-DBD) in Ne/Xe gas mixture for plasma display panel. Measurements show that the excimer radiation with the 172 nm band lines is strongly observed in the afterglow, and drastically increases with an increase in gas pressure and applied voltage. It is also found that for high gas pressure and low voltage, excimer molecule (Xe{sub 2}{sup *}) is efficiently produced because of less infrared emission from Xe excited atom. The reaction processes of Xe metastable atom (Xe{sub 1s5}{sup *}), which is a precursor for Xe{sub 2}{sup *}, are theoretically analyzed using a one-dimensional fluid model. Increasing gas pressure results in large excimer radiation due to the enhancement of the following three processes, i.e., the conversion process from Xe{sub 1s5}{sup *} to Xe{sub 2}{sup *}, the direct electron impact excitation from ground state to Xe{sub 1s5}{sup *}, and the collisional de-excitation process from upper level (Xe{sup **}) to Xe{sub 1s5}{sup *}. The simulation analytical result shows that for lower voltage, Xe{sub 1s5}{sup *} is efficiently produced due to the increase in the ratio of direct excitation to Xe{sub 1s5}{sup *} from ground state and the suppression of the stepwise ionization from Xe{sub 1s5}{sup *} by electron collisions. While for high voltage operation of micro-DBD, the recombination process with Xe molecular ion (Xe{sub 2}{sup +}) and electron contributes to the total excimer radiation, which can be responsible for the large excimer radiation observed in experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micro-focused Small Angle Neutron Scattering and Imaging for Science and Engineering Using RTP--A Preliminary Study

Malaysian Nuclear Agency's (Nuclear Malaysia) Small Angle Neutron Scattering (SANS) facility--(MYSANS)--is utilizing low flux of thermal neutron at the agency's 1 MW TRIGA reactor. As the design nature of the 8 m SANS facility can allow object resolution in the range between 5 and 80 nm to be obtained. It can be used to study alloys, ceramics and polymers in certain area of problems that relate to samples containing strong scatterers or contrast. The current SANS system at Malaysian Nuclear Agency is only capable to measure Q in limited range with a PSD (128x128) fixed at 4 m from the sample. The existing reactor hall that incorporate this MYSANS facility has a layout that prohibits the rebuilding of MYSANS therefore the position between the wavelength selector (HOPG) and sample and the PSD cannot be increased for wider Q range. The flux of the neutron at current sample holder is very low which around 10{sup 3} n/cm{sup 2}/sec. Thus it is important to rebuild the MYSANS to maximize the utilization of neutron. Over the years, the facility has undergone maintenance and some changes have been made. Modification on secondary shutter and control has been carried out to improve the safety level of the instrument. A compact micro-focus SANS method can suit this objective together with an improve cryostat system. This paper will explain some design concept and approaches in achieving higher flux and the modification needs to establish the micro-focused SANS.

36 MATERIALS SCIENCE↗

Nuclear waste repository research at the micro- to nanoscale

Micro- and nano-focused synchrotron radiation techniques to investigate determinant processes in contaminant transport in geological media are becoming especially an increasingly used tool in nuclear waste disposal research. There are a number of reasons for this but primarily they are driven by the need to characterize actinide speciation localized in components of heterogeneous natural systems. We summarize some of the recent research conducted by researchers of the Institute of Nuclear Waste Disposal (INE) at the Karlsruhe Institute of Technology using micro- and nano-focused X-ray beams for characterization of colloids and their interaction with minerals and of elemental and phase distributions in potential repository host rocks and actinide speciation in a repository natural analogues sample. Such investigations are prerequisite to ensuring reliable assessment of the long term radiological safety for proposed nuclear waste disposal sites.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

THE ADIABATIC DEMAGNETIZATION REFRIGERATOR FOR THE MICRO-X SOUNDING ROCKET TELESCOPE

The Micro-X Imaging X-ray Spectrometer is a sounding rocket payload slated for launch in 2011. An array of Transition Edge Sensors, which is operated at a bath temperature of 50 mK, will be used to obtain a high resolution spectrum of the Puppis-A supernova remnant. An Adiabatic Demagnetization Refrigerator (ADR) with a 75 gram Ferric Ammonium Alum (FAA) salt pill in the bore of a 4 T superconducting magnet provides a stable heat sink for the detector array only a few seconds after burnout of the rocket motors. This requires a cold stage design with very short thermal time constants. A suspension made from Kevlar strings holds the 255 gram cold stage in place. It is capable of withstanding loads in excess of 200 g. Stable operation of the TES array in proximity to the ADR magnet is ensured by a three-stage magnetic shielding system which consists of a superconducting can, a high-permeability shield and a bucking coil. The development and testing of the Micro-X payload is well underway.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of fast (sub-minute) micro-tomography

An x-ray fast micro-tomography system was developed at medical and imaging beamline BL20B2 in SPring-8. We attempted a 'continuous rotation method' whereby the sample keeps rotating in the beam during the measurement. The image acquisitions are synchronized with the trigger pulses branched from the stepper motor controller. An electron multiplier (EM)-CCD camera (C9100-02, 1000x1000 pixels, 30 fps, 8 {mu}m/pixel, Hamamatsu Photonics) and beam-monitor AA40P (Hamamatsu Photonics) were used as an image detector. The effective pixel size of the detector was 4.9 {mu}m/pixel and the spatial resolution was about 15 {mu}m. The total measurement time for 900 projections has been reduced to 36 s. The reconstruction time was also reduced using GPGPU and SSD system. Using these techniques, preliminary experiment for 4-D (time resolved 3-D) micro-imaging has also been performed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Femtosecond Laser Micro-structuring Of Transparent Materials And Its Ophthalmologic Applications

We have successfully fabricated in vitro femtosecond laser micro-incisions inside cornea and--for the first time--inside sclera mildly pre-cleared by a biocompatible and clinically safe (non-toxic) natural agent (replacive refractive index-matching 40%-glucose solution in water), with the tissues taken as fresh cool cuts of human cadaver eyes, and reported on basic operational conditions of the micro-surgical procedures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composition and strain in thin Si{sub 1-x}Ge{sub x} virtual substrates measured by micro-Raman spectroscopy and x-ray diffraction

Micro-Raman spectroscopy was employed for the determination of the germanium content, x and strain, {epsilon}, in ultrathin SiGe virtual substrates grown directly on Si by molecular beam epitaxy. The growth of highly relaxed SiGe layers was achieved by the introduction of point defects at a very low temperature during the initial stage of growth. SiGe virtual substrates with thicknesses in the range 40-200 nm with a high Ge content (up to 50%) and degree of relaxation, r, in the range 20%-100% were investigated using micro-Raman spectroscopy and x-ray diffraction (XRD) techniques. The Ge content, x, and strain, {epsilon}, were estimated from equations describing Si-Si, Si-Ge, and Ge-Ge Raman vibrational modes, modified in this study for application to thin SiGe layers. The alteration of the experimentally derived equations from previous studies was performed using independent data for x and r obtained from XRD reciprocal space maps. A number of samples consisting of a strained-silicon (s-Si) layer deposited on a SiGe virtual substrate were also analyzed. The stress value for the s-Si varied from 0.54 to 2.75 GPa, depending on the Ge-content in the virtual substrates. These results are in good agreement with theoretically predicted values.

36 MATERIALS SCIENCE↗

Experimental Study on Influence of Process Variables on Crater Dimensions in Micro- EDM of {gamma}-Titanium Aluminide

In the present work the effect of different dielectric mediums in micro-EDM of {gamma}-Titanium Aluminide alloy have been investigated. Experiments were conducted both in the absence (dry conditions) and in presence of dielectric (EDM oil).Circular craters were produced both in the presence and absence of dielectric fluid using varying micro-EDM process variables i.e. open circuit voltage, discharge capacitance, pulse frequency and pulse-on-time. Over cut was measured from optical microscope images using Image Analyzer software. Influences of process variables and optimal conditions for minimum over cut on crater dimensions were investigated. ANOVA test which shows that capacitance of RC circuit contributes significantly in crater formation followed by pulse frequency. Optical photographs exhibit that over cut are less in air medium compared to oil medium.

36 MATERIALS SCIENCE↗

Optimisation of the blank shape for micro deep drawing of rectangular parts

In this investigation the blank shape for micro deep drawing of rectangular parts was for the first time optimized using FEM method with consideration of the real process conditions in micro forming, i.e. the coefficient of friction and the flow curves of thin foils. The acquired optimized blank shape was then validated by applying it to experiments. For both numerical and experimental investigations a punch with a section of 2x1 mm{sup 2} was used. Aluminum Al99.5 with a sheet thickness of 20 {mu}m was used as blank material in this investigation. A flange free drawn part was successfully obtained from experiment using the blank shape and blank holder force optimized using FEM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferromagnetic Resonance of Micro- and Nano-sized Hexagonal Ferrite Powders at Millimeter Waves

Complex magnetic permeability and dielectric permittivity of micro- and nano-sized powdered barium (BaFe{sub 12}O{sub 19}) and strontium (SrFe{sub 12}O{sub 19}) hexaferrites have been studied in a broadband millimeter wave frequency range (30-120 GHz). Transmittance measurements have been performed using a free space quasi-optical millimeter wave spectrometer, equipped with a set of high power backward wave oscillators. Real and imaginary parts of dielectric permittivity for both types of micro- and nanoferrites have been calculated using analysis of recorded high precision transmittance spectra. Frequency dependences of the magnetic permeability have been obtained from Schloemann's equation for partially magnetized ferrites. These materials show promise as tunable millimeter wave absorber, based on their size-dependent absorption.

36 MATERIALS SCIENCE↗

Contactless monitoring of Ge content and B concentration in ultrathin single and double layer Si{sub 1-x}Ge{sub x} epitaxial films using multiwavelength micro-Raman spectroscopy

Non-contact monitoring of Ge content and B concentration in single and double Si{sub 1-x}Ge{sub x} epitaxial layers on Si(100) device wafers was attempted using high-resolution, multiwavelength micro-Raman spectroscopy. The Ge content and B concentration determined by secondary ion mass spectroscopy (SIMS) depth profiling showed very strong correlation with the position and full-width-at-half-maximum of the Si-Si peak from the Si{sub 1-x}Ge{sub x} epitaxial layers as determined by Raman measurements. High resolution X-ray diffraction (HRXRD) characterization was done for all wafers to determine Ge and B sensitivity and form comparisons with Raman and SIMS analysis. The non-destructive, in-line monitoring of Ge content and B concentration of single and double Si{sub 1-x}Ge{sub x} epitaxial layers with thickness ranging from 5 {approx} 120 nm, on small area monitoring pads, was successfully demonstrated by multiwavelength micro-Raman spectroscopy during epitaxial process optimization, material property verification, and quality control applications.

36 MATERIALS SCIENCE↗

The design and analysis of beam-membrane structure sensors for micro-pressure measurement

This paper reports the design and analysis of a type of piezoresistive pressure sensor for micro-pressure measurement with a cross beam-membrane (CBM) structure. This new silicon substrate-based sensor has the advantages of a miniature structure and high sensitivity, linearity, and accuracy. By using the finite element method to analyze the stress distribution of the new structure and subsequently deducing the relationship between structural dimensions and mechanical performances, equations used to determine the CBM structure are established. Based on the CBM model and our stress and deflections equations, sensor fabrication is then performed on the silicon wafer via a process including anisotropy chemical etching and inductively coupled plasma. The structure's merits, such as linearity, sensitivity, and repeatability, have been investigated under the pressure of 5 kPa. Our results show that the precision of these equations is {+-}0.19%FS, indicating that this new small-sized structure offers easy preparation, high sensitivity, and high accuracy for micro-pressure measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phase emerging from intramonolayer cycloaddition on micro-patterned monolayer

Cu(I)-catalyzed cycloaddition between azide and acetylene, followed by hydrolysis of ester were performed on micro-patterned self-assembled monolayer to produce smaller features. The reactions were initially performed on mixed monolayers and analysed by water contact angle (CA) and confirmed by X-ray Photoelectron Spectroscopy (XPS). The contact angle measurement has shown a drastic wetting of water on the surface of mixed monolayer indicating that the terminal groups on mixed monolayer has changed into carboxylic acid and hydroxyl terminals. The reactions work in a similar way on micro-patterned SAM and analyzed by using friction force microscope. The emerging of the new lines with high friction force on the border suggested a successful intramonolayer reactions on the border of the patterned SAM.

36 MATERIALS SCIENCE↗

Cantilever anemometer based on a superconducting micro-resonator: Application to superfluid turbulence

We present a new type of cryogenic local velocity probe that operates in liquid helium (1 K < T < 4.2 K) and achieves a spatial resolution of Almost-Equal-To 0.1 mm. The operating principle is based on the deflection of a micro-machined silicon cantilever which reflects the local fluid velocity. Deflection is probed using a superconducting niobium micro-resonator sputtered on the sensor and used as a strain gauge. We present the working principle and the design of the probe, as well as calibration measurements and velocity spectra obtained in a turbulent helium flow above and below the superfluid transition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron current extraction from radio frequency excited micro-dielectric barrier discharges

Micro dielectric barrier discharges (mDBDs) consist of micro-plasma devices (10-100 {mu}m diameter) in which the electrodes are fully or partially covered by dielectrics, and often operate at atmospheric pressure driven with radio frequency (rf) waveforms. In certain applications, it may be desirable to extract electron current out of the mDBD plasma, which necessitates a third electrode. As a result, the physical structure of the m-DBD and the electron emitting properties of its materials are important to its operation. In this paper, results from a two-dimensional computer simulation of current extraction from mDBDs sustained in atmospheric pressure N{sub 2} will be discussed. The mDBDs are sandwich structures with an opening of tens-of-microns excited with rf voltage waveforms of up to 25 MHz. Following avalanche by electron impact ionization in the mDBD cavity, the plasma can be expelled from the cavity towards the extraction electrode during the part of the rf cycle when the extraction electrode appears anodic. The electron current extraction can be enhanced by biasing this electrode. The charge collection can be controlled by choice of rf frequency, rf driving voltage, and permittivity of the dielectric barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micro-Raman investigations of InN-GaN core-shell nanowires on Si (111) substrate

The electron-phonon interactions in InN-GaN core-shell nanowires grown by plasma assisted- molecular beam epitaxy (MBE) on Si (111) substrate have been analysed using micro-Raman spectroscopic technique with the excitation wavelength of 633, 488 and 325 nm. The Raman scattering at 633 nm reveals the characteristic E{sub 2} (high) and A{sub 1} (LO) phonon mode of InN core at 490 and 590 cm{sup -1} respectively and E{sub 2} (high) phonon mode of GaN shell at 573 cm{sup -1}. The free carrier concentration of InN core is found to be low in the order {approx} 10{sup 16} cm{sup -3} due to the screening of charge carriers by thin GaN shell. Diameter of InN core evaluated using the spatial correlation model is consistent with the transmission electron microscopic measurement of {approx}15 nm. The phonon-life time of core-shell nanowire structure is estimated to be {approx}0.4 ps. The micro-Raman mapping and its corresponding localised spectra for 325 nm excitation exhibit intense E{sub 2} (high) phonon mode of GaN shell at 573 cm{sup -1} as the decrease of laser interaction length and the signal intensity is quenched at the voids due to high spacing of NWs.

36 MATERIALS SCIENCE↗

Two-dimensional model of orificed micro-hollow cathode discharge for space application

In this paper, we describe results of self-consistent two-dimensional (x-z) particle-in-cell simulations, with a Monte Carlo collision model, of an orificed micro-hollow cathode operating in a planar diode geometry. The model includes thermionic electron emission with Schottky effect, secondary electron emission due to cathode bombardment by the plasma ions, several different collision processes, and a non-uniform xenon background gas density in the cathode-anode gap. Simulated results showing behavior of the plasma density, potential distribution, and energy flux towards the hollow cathode and orifice walls, are discussed. In addition, results of simulations showing the effect of different Xe gas pressures, orifice size, and cathode voltage, on operation of the micro-hollow cathode are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanowire-integrated microporous silicon membrane for continuous fluid transport in micro cooling device

We report an efficient passive micro pump system combining the physical properties of nanowires and micropores. This nanowire-integrated microporous silicon membrane was created to feed coolant continuously onto the surface of the wick in a micro cooling device to ensure it remains hydrated and in case of dryout, allow for regeneration of the system. The membrane was fabricated by photoelectrochemical etching to form micropores followed by hydrothermal growth of nanowires. This study shows a promising approach to address thermal management challenges for next generation electronic devices with absence of external power.

77 NANOSCIENCE AND NANOTECHNOLOGY↗