Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Calibrating a finite-strain phase-field model of fracture for bonded granular materials with uncertainty quantification

To study the mechanical behavior of mock high explosives, an experimental and simulation program was developed to calibrate, with quantified uncertainty, a material model of the bonded granular material Idoxuridine and nitroplasticized Estane-5703. This paper reports on the efficacy of such a framework as a generalizable methodology for calibrating material models against experimental data with uncertainty quantification. Additionally, this paper studies the effect of two manufacturing temperatures and three initial granular configurations on the unconfined compressive behavior of the resulting bonded granular materials. In each of these cases, the same calibration framework was used; in that, hundreds of high-fidelity direct numerical simulations using a new, graphics processing unit-enabled, high-performance finite element method software, Ratel, were run to calibrate a finite-strain phase-field fracture model against experimental data. It was found that manufacturing temperature influenced the elastic response of the mock high explosives, with higher temperatures yielding a stiffer response. By contrast, it was found that the initial configuration of the grains had a negligible impact on the overall behavior of the mock high explosives though it remains possible that local damage accumulation within the specimens could be altered by the initial configurations. Overall, the calibration framework was successful at creating well-calibrated models, showing its usefulness as an engineering and scientific tool.

36 MATERIALS SCIENCE↗

Quality control for community-based sea-ice model development

A new collaborative organization for sea-ice model development, the CICE Consortium, has devised quality control procedures to maintain the integrity of its numerical codes' physical representations, enabling broad participation from the scientific community in the Consortium's open software development environment. Using output from five coupled and uncoupled configurations of the Los Alamos Sea Ice Model, CICE, we formulate quality control methods that exploit common statistical properties of sea-ice thickness, and test for significant changes in model results in a computationally efficient manner. New additions and changes to CICE are graded into four categories, ranging from bit-for-bit amendments to significant, answer-changing upgrades. These modifications are assessed using criteria that account for the high level of autocorrelation in sea-ice time series, along with a quadratic skill metric that searches for hemispheric changes in model answers across an array of different CICE configurations. These metrics also provide objective guidance for assessing new physical representations and code functionality.

58 GEOSCIENCES↗

p4est : Scalable Algorithms for Parallel Adaptive Mesh Refinement on Forests of Octrees

We present scalable algorithms for parallel adaptive mesh refinement and coarsening (AMR), partitioning, and 2:1 balancing on computational domains composed of multiple connected two-dimensional quadtrees or three-dimensional octrees, referred to as a forest of octrees. By distributing the union of octants from all octrees in parallel, we combine the high scalability proven previously for adaptive single-octree algorithms with the geometric flexibility that can be achieved by arbitrarily connected hexahedral macromeshes, in which each macroelement is the root of an adapted octree. A key concept of our approach is an encoding scheme of the interoctree connectivity that permits arbitrary relative orientations between octrees. Based on this encoding we develop interoctree transformations of octants. These form the basis for high-level parallel octree algorithms, which are designed to interact with an application code such as a numerical solver for partial differential equations. We have implemented and tested these algorithms in the p4est software library. We demonstrate the parallel scalability of p4est on its own and in combination with two geophysics codes. Using p4est we generate and adapt multioctree meshes with up to $5.13\times10^{11}$ octants on as many as 220,320 CPU cores and execute the 2:1 balance algorithm in less than 10 seconds per million octants per process.

Mathematics↗

APBSmem: A Graphical Interface for Electrostatic Calculations at the Membrane

Electrostatic forces are one of the primary determinants of molecular interactions. They help guide the folding of proteins, increase the binding of one protein to another and facilitate protein-DNA and protein-ligand binding. A popular method for computing the electrostatic properties of biological systems is to numerically solve the Poisson-Boltzmann (PB) equation, and there are several easy-to-use software packages available that solve the PB equation for soluble proteins. Here we present a freely available program, called APBSmem, for carrying out these calculations in the presence of a membrane. The Adaptive Poisson-Boltzmann Solver (APBS) is used as a back-end for solving the PB equation, and a Java-based graphical user interface (GUI) coordinates a set of routines that introduce the influence of the membrane, determine its placement relative to the protein, and set the membrane potential. The software Jmol is embedded in the GUI to visualize the protein inserted in the membrane before the calculation and the electrostatic potential after completing the computation. We expect that the ease with which the GUI allows one to carry out these calculations will make this software a useful resource for experimenters and computational researchers alike. Three examples of membrane protein electrostatic calculations are carried out to illustrate how to use APBSmem and to highlight the different quantities of interest that can be calculated.

59 BASIC BIOLOGICAL SCIENCES↗

Methods to Automate Assessing the Outage Risk and Technical Specification Compliance for Planned Work and Current Plant Conditions. Light Water Reactor Sustainability Program report

This research effort is a part of the Light Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by the Department of Energy. The LWRS Program is performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long term, safe, and economical operation of current nuclear power plants (NPPs). The LWRS Program serves to help the United States (U.S.) nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of these NPPs and the extension of their current operating licenses. The Outage Risk Management Improvement Pilot Project seeks to improve the management of nuclear power plant outages. This is done through the development of tools to assist in evaluating pending activities against requirements to detect undesired interactions. Significant efforts are expended to manage the nuclear risk of an outage. The utilities conduct pre outage risk assessments, based on a very detailed review of the outage schedule, to identify where combinations of outage work and out of service equipment would result in degraded conditions with respect to nuclear safety or regulatory compliance. Probabilistic risk assessment studies are conducted to quantify incremental core damage frequency as a result of the outage activities and system unavailability. These studies are usually presented to site and fleet management, the site plant operational review committee, and the NPP’s independent Nuclear Safety Review Board for concurrence that the outage is planned safely and that reasonable measures have been taken to reduce the added risk of conducting the outage. During the outage, the plant configuration is monitored continuously to ensure that it conforms to the approved safety plan. Deviations must be assessed and approved by management committees and, in some cases, the plant operational review committee. In virtually all outage meetings and job briefings, the current nuclear safety status of the plant is communicated, including information on the specific equipment necessary to meet the requirements of the nuclear safety plan. In addition, the operations and outage organizations implement several layers of physical and administrative barriers to prevent unintended interaction with the systems and equipment credited for nuclear safety. In spite of all these efforts, nuclear safety challenges still occur too frequently during outages. While some of these are due to failures of equipment credited for safety, the majority occur because of human error. These typically involve some form of interaction between work activities and plant configuration changes. Some of them are very subtle and are extremely challenging to detect in advance. Nevertheless, they are not acceptable and represent clear opportunities to improve nuclear safety during outages. This particular report will provide a demonstration of the capabilities in the development of a predictive software platform for improving configuration control and accessing the plant risks associated with outage work protocols and illustrate how the software assists in strategies to minimize these interactions. In addition to maintaining nuclear safety, there are numerous administrative requirements that must be complied with during an outage. This report will discuss the use of logic modelling to monitor planned work against technical specification requirements for given plant conditions and to integrate these requirements with shutdown risk models, clearance order requirements and other plant condition requirements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Power Grid Computational Challenges and Metrics for Hardware Accelerator Evaluation

The objective of this document is to support the DMC initiative’s research on hardware and software development. Our focus is on the power grid domain that has a rich diversity of numerical and computationally challenging applications. Through this document, we highlight two core building blocks, power flow, and transient stability equations, for power grid applications. Improving computational robustness and acceleration of these core blocks will tremendously benefit all power grid applications. We also highlight the most computationally dominant numerical kernels that are being used in power flow and transient stability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An introduction to quantitative remote sensing

The quantitative approach to remote sensing is discussed along with the analysis of remote sensing data. Emphasis is placed on the application of pattern recognition in numerically oriented remote sensing systems. A common background and orientation for users of the LARS computer software system is provided.

Lindenlaub, J. C.↗

Onyx-Advanced Aeropropulsion Simulation Framework Created

The Numerical Propulsion System Simulation (NPSS) project at the NASA Glenn Research Center is developing a new software environment for analyzing and designing aircraft engines and, eventually, space transportation systems. Its purpose is to dramatically reduce the time, effort, and expense necessary to design and test jet engines by creating sophisticated computer simulations of an aerospace object or system (refs. 1 and 2). Through a university grant as part of that effort, researchers at the University of Toledo have developed Onyx, an extensible Java-based (Sun Micro-systems, Inc.), objectoriented simulation framework, to investigate how advanced software design techniques can be successfully applied to aeropropulsion system simulation (refs. 3 and 4). The design of Onyx's architecture enables users to customize and extend the framework to add new functionality or adapt simulation behavior as required. It exploits object-oriented technologies, such as design patterns, domain frameworks, and software components, to develop a modular system in which users can dynamically replace components with others having different functionality.

Reed, John A.↗

"Layers in the Equatorial Mesosphere, Motions and Aerosol Rocket and Radar Study (LEMMA)"

Our role in the LEMMA rocket and radar measurement program had several components corresponding to the various phases of the research effort. Our initial efforts focused on definition of the experimental configuration and measurement requirements following the decision to move the experiment to Kwajalein. At this stage of the research, the PI of this subtask consulted with the project PI, Dr. Gerald Lehmacher, and other participants in defining the atmospheric conditions that would allow optimal measurements and the radar modes that would best characterize the structures we hoped to observe. This proved to be a challenge, as the ALTAIR radar, despite its substantial capabilities, did not have a representative suite of software control and analysis capabilities. Once the experiment and timing were defined, our role shifted to numerical characterization of potential radar backscatter and in situ turbulence signatures accompanying various dynamical processes. Following completion of the measurement program, we supported the analysis and interpretation of the experimental data.

Fritts, D. C.↗

Advanced Wireless Sensor Nodes - MSFC

NASA field center Marshall Space Flight Center (Huntsville, AL), has invested in advanced wireless sensor technology development. Developments for a wireless microcontroller back-end were primarily focused on the commercial Synapse Wireless family of devices. These devices have many useful features for NASA applications, good characteristics and the ability to be programmed Over-The-Air (OTA). The effort has focused on two widely used sensor types, mechanical strain gauges and thermal sensors. Mechanical strain gauges are used extensively in NASA structural testing and even on vehicle instrumentation systems. Additionally, thermal monitoring with many types of sensors is extensively used. These thermal sensors include thermocouples of all types, resistive temperature devices (RTDs), diodes and other thermal sensor types. The wireless thermal board will accommodate all of these types of sensor inputs to an analog front end. The analog front end on each of the sensors interfaces to the Synapse wireless microcontroller, based on the Atmel Atmega128 device. Once the analog sensor output data is digitized by the onboard analog to digital converter (A/D), the data is available for analysis, computation or transmission. Various hardware features allow custom embedded software to manage battery power to enhance battery life. This technology development fits nicely into using numerous additional sensor front ends, including some of the low-cost printed circuit board capacitive moisture content sensors currently being developed at Auburn University.

Varnavas, Kosta↗

IMAPS Device Packaging Conference 2017 - Engineered Micro Systems & Devices Track

NASA field center Marshall Space Flight Center (Huntsville, AL), has invested in advanced wireless sensor technology development. Developments for a wireless microcontroller back-end were primarily focused on the commercial Synapse Wireless family of devices. These devices have many useful features for NASA applications, good characteristics and the ability to be programmed Over-The-Air (OTA). The effort has focused on two widely used sensor types, mechanical strain gauges and thermal sensors. Mechanical strain gauges are used extensively in NASA structural testing and even on vehicle instrumentation systems. Additionally, thermal monitoring with many types of sensors is extensively used. These thermal sensors include thermocouples of all types, resistive temperature devices (RTDs), diodes and other thermal sensor types. The wireless thermal board will accommodate all of these types of sensor inputs to an analog front end. The analog front end on each of the sensors interfaces to the Synapse wireless microcontroller, based on the Atmel Atmega128 device. Once the analog sensor output data is digitized by the onboard analog to digital converter (A/D), the data is available for analysis, computation or transmission. Various hardware features allow custom embedded software to manage battery power to enhance battery life. This technology development fits nicely into using numerous additional sensor front ends, including some of the low-cost printed circuit board capacitive moisture content sensors currently being developed at Auburn University.

Varnavas, Kosta↗

TPSAS-NF1676L-27483-DND

scene to retrieve their microphysical properties. The Clouds and the Earth's Radiant Energy System (CERES) Project uses the infrared channels (6.72 Âμm, 7.33 Âμm, 13.3 Âμm,13.6 Âμm, 13.9 Âμm, and 14.2 Âμm) available on the Terra and Aqua Moderate Resolution Imaging Spectroradiometers (MODIS) to build its algorithms to retrieval cloud properties. Unfortunately, The Visible Infrared Imaging Radiometer Suite (VIIRS) on board Suomi-NPP (National Polar-Orbiting Partnership) lacks these particular measurements. While conducting research using VIIRS data, it is desirable to bring these data into the VIIRS resolution. The Cross-track Infrared Sounder (CrIS), which is also on board Suomi-NPP, has these infrared channels. This paper describes a method to map the CrIS spectral radiances of CO2 and water vapor to VIIRS, with the mapping software in ATOVS and AVHRR Pre-processing (AAPP) package provided by Satellite Application Facilities for Numerical Weather Prediction (NWP SAF). This method is validated comparing mapped10.763 Âμm from CrIS with M15 from VIIRS. The mapped CO2 and water vapor channels were then created and combined with the conventional VIIRS product, as well as compared against corresponding channels of Aqua MODIS instrument.

Yan Chen↗

Computational Nondestructive Evaluation Case Studies at NASA

The state of the art of numerical simulation of nondestructive evaluations (NDE) has begun to transition from research to application. The simulation software, both commercial and custom, has reached a level of maturity where it can be readily deployed to solve real world problems. The next area of research that is beginning to emerge is determining when and how to NDE simulation should be applied. At NASA Langley Research Center, NDE simulations have already been utilized for several aerospace projects to facilitate or enhance understanding of the inspection optimization and interpretation of results. Researchers at NASA have identified several different scenarios where it is appropriate to utilized NDE simulations. In this presentation, we will describe these scenarios, give examples of each instance, and demonstrate how NDE simulations were applied to solve problems with an emphasis on the mechanics of integrating with other workgroups. These examples will include inspection planning for multi-layer pressure vessels as well as on-orbit inspections.

Peter D. Juarez↗

HamLib: A Library of Hamiltonians for Benchmarking Quantum Algorithms and Hardware

For a considerable time, large datasets containing problem instances have proven valuable for analyzing computer hardware, software, and algorithms. One notable example of the value of large datasets is ImageNet [1], a vast repository of images that has been instrumental in testing numerous deep learning packages. Similarly, in the domain of computational chemistry and materials science, the availability of extensive datasets such as the Protein Data Bank [2], the Materials Project [3], and QM9 [4] has greatly facilitated the evaluation of new algorithms and software approaches, while also promoting standardization within the field. These well-defined datasets and problem instances, in turn, serve as the foundation for creating benchmarking suites like MLPerf [5] and LINPACK [6], [7]. These suites enable fair and rigorous comparisons of different methodologies and solutions, fostering continuous advancements in various areas of computer science and beyond.

Sawaya, Nicolas PD↗

Efficient simulation of press hardening process through integrated structural and CFD analyses

Press hardened steel parts are being increasingly used in automotive structures for their higher strength to meet safety standards while reducing vehicle weight to improve fuel consumption. However, manufacturing of sheet metal parts by press hardening process to achieve desired properties is extremely challenging as it involves complex interaction of plastic deformation, metallurgical change, thermal distribution, and fluid flow. Numerical simulation is critical for successful design of the process and to understand the interaction among the numerous process parameters to control the press hardening process in order to consistently achieve desired part properties. Until now there has been no integrated commercial software solution that can efficiently model the complete process from forming of the blank, heat transfer between the blank and tool, microstructure evolution in the blank, heat loss from tool to the fluid that flows through water channels in the tools. In this study, a numerical solution based on Altair HyperWorks® product suite involving RADIOSS®, a non-linear finite element based structural analysis solver and AcuSolve®, an incompressible fluid flow solver based on Galerkin Least Square Finite Element Method have been utilized to develop an efficient solution for complete press hardening process design and analysis. RADIOSS is used to handle the plastic deformation, heat transfer between the blank and tool, and microstructure evolution in the blank during cooling. While AcuSolve is used to efficiently model heat loss from tool to the fluid that flows through water channels in the tools. The approach is demonstrated through some case studies.

36 MATERIALS SCIENCE↗

Providing performance portable numerics for Intel GPUs

Summary With discrete Intel GPUs entering the high‐performance computing landscape, there is an urgent need for production‐ready software stacks for these platforms. In this article, we report how we enable the Ginkgo math library to execute on Intel GPUs by developing a kernel backed based on the DPC++ programming environment. We discuss conceptual differences between the CUDA and DPC++ programming models and describe workflows for simplified code conversion. We evaluate the performance of basic and advanced sparse linear algebra routines available in Ginkgo's DPC++ backend in the hardware‐specific performance bounds and compare against routines providing the same functionality that ship with Intel's oneMKL vendor library.

97 MATHEMATICS AND COMPUTING↗

Scalability of high-performance PDE solvers

Performance tests and analyses are critical to effective high-performance computing software development and are central components in the design and implementation of computational algorithms for achieving faster simulations on existing and future computing architectures for large-scale application problems. In this article, we explore performance and space-time trade-offs for important compute-intensive kernels of large-scale numerical solvers for partial differential equations (PDEs) that govern a wide range of physical applications. We consider a sequence of PDE-motivated bake-off problems designed to establish best practices for efficient high-order simulations across a variety of codes and platforms. We measure peak performance (degrees of freedom per second) on a fixed number of nodes and identify effective code optimization strategies for each architecture. In addition to peak performance, we identify the minimum time to solution at 80% parallel efficiency. The performance analysis is based on spectral and p-type finite elements but is equally applicable to a broad spectrum of numerical PDE discretizations, including finite difference, finite volume, and h-type finite elements.

97 MATHEMATICS AND COMPUTING↗