Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Outflows, Jets and Shocks in the Orion Nebula

The rich young cluster of stars associated with the Orion Nebula provides a unique laboratory for the study of plasma phenomena. We see five types of flows and shocks. Photoablation outflow from the proplyds nearest theta (exp 1) Ori C form nearly stationary shocks with the high velocity wind from that star. Microjets, with scales of less than 10 (exp 4) AU, are seen around some 20 low mass stars. Isolated jets, with high velocities and scales of about, 104 AU, are less numerous but common. One also sees the shocks formed when these jets impinge on the ionized nebular gas and the neutral gas in the foreground lid. The final type of object is the stationary shock formed by the interaction from the stellar wind that arises during disk formation with the ambient, gas flowing away from the main body of the nebula.

ODell, C. R.↗

Subcooled Pool Boiling Heat Transfer Mechanisms in Microgravity: Terrier-improved Orion Sounding Rocket Experiment

A microscale heater array was used to study boiling in earth gravity and microgravity. The heater array consisted of 96 serpentine heaters on a quartz substrate. Each heater was 0.27 square millimeters. Electronic feedback loops kept each heater's temperature at a specified value. The University of Maryland constructed an experiment for the Terrier-Improved Orion sounding rocket that was delivered to NASA Wallops and flown. About 200 s of high quality microgravity and heat transfer data were obtained. The VCR malfunctioned, and no video was acquired. Subsequently, the test package was redesigned to fly on the KC-135 to obtain both data and video. The pressure was held at atmospheric pressure and the bulk temperature was about 20 C. The wall temperature was varied from 85 to 65 C. Results show that gravity has little effect on boiling heat transfer at wall superheats below 25 C, despite vast differences in bubble behavior between gravity levels. In microgravity, a large primary bubble was surrounded by smaller bubbles, which eventually merged with the primary bubble. This bubble was formed by smaller bubbles coalescing, but had a constant size for a given superheat, indicating a balance between evaporation at the base and condensation on the cap. Most of the heaters under the bubble indicated low heat transfer, suggesting dryout at those heaters. High heat transfer occurred at the contact line surrounding the primary bubble. Marangoni convection formed a "jet" of fluid into the bulk fluid that forced the bubble onto the heater.

Kim, Jungho↗

Variations in the 3 Micron Spectrum Across the Orion Bar: PAHS and Related Molecules

Long-slit spectra across the Orion Bar reveal significant differences in the spatial behavior of the components of the 3 micrometer PAH spectrum. The strong PAH band at 3.29 micrometers generally decreases exponentially with distance from the ionization front into the molecular cloud (scale height approximately 12"), although excesses appear approximately 10" and approximately 20" behind the ionization front, close to layers of H2 and CO emission respectively. The 3.40 micrometer PAH feature separates into two components with very different spatial distributions. The main component (at 3.395 micrometers), along with the 3.51 micrometer band and the PAH plateau (3.3-3.6 micrometers), shows excess emission approximately 10" and approximately 20" behind the ionization front, stronger than the excesses in the 3.29 micrometer band. The extra component of the 3.40 micrometer band, which peaks at approximately 3.405 micrometers, has a spatial distribution very similar to the H2 emission. Aromatic C-H stretches in PAHs most likely produce the 3.29 micrometer feature. Aliphatic C-H stretches in either attached methyl sidegroups or super-hydrogenated PAHs (H-PAHs), or perhaps both, could produce the complicated spectral and spatial structure at 3.40 micrometers. The distribution of these fragile PAH-based species traces the physical and chemical conditions in the interface between the ionized region and molecular cloud.

Sloan, G. C.↗

Mid-Infrared Imaging of Orion BN/KL With Keck I Telescope

We present new images of the Orion BN/KL infrared complex at 4.8, 8.0, 8.9, 9.9, 10.4, 11.7, 12.5, 17.6, 18.1, 20.0 and 22.0 microns obtained with the 10-meter Keck I telescope, with typically 0.3 arcsec resolution at 12.5 microns. The multi-wavelength observational image data is registered in a stack and a dust emission/extinction model is fitted to the resulting spectrum of each pixel to create a diffraction-limited "image" of the temperature, opacity and luminosity of the emitting dust, as well as the circumstellar and line-of-sight dust extinction. New source structure, temperature, opacity and luminosity detail is seen in the vicinity of IRc2-IRc7. The model results are used to develop a more complete picture of the structure and energetics of the BN/KL infrared complex.

Oegerle, William↗

Tracing the Magnetic Field in Orion A

We use extensive 350 micron polarimetry and continuum maps obtained with Hertz and SHARC II along with HCN and HCO(sup +) spectroscopic data to trace the orientation of the magnetic field in the Orion A star-forming region. Using the polarimetry data, we find that the direction of the projection of the magnetic field in the plane of the sky relative to the orientation of the integral-shaped filament varies considerably as one moves from north to south. While in IRAS 05327-0457 and OMC-3 MMS 1-6 the projection of the field is primarily perpendicular to the filament it becomes better aligned with it at OMC-3 MMS 8-9 and well aligned with it at OMC-2 FIR 6. The OMC-2 FIR 4 cloud, located between the last two, is a peculiar object where we find almost no polarization. There is a relatively sharp boundary within its core where two adjacent regions exhibiting differing polarization angles merge. The projected angle of the field is more complicated in OMC-1 where it exhibits smooth variations in its orientation across the face of this massive complex. We also note that while the relative orientation of the projected angle of the magnetic field to the filament varies significantly in the OMC-3 and OMC-2 regions, its orientation relative to a fixed position on the sky shows much more stability. This suggests that, perhaps, the orientation of the field is relatively unaffected by the mass condensations present in these parts of the molecular cloud. By combining the polarimetry and spectroscopic data we were able to measure a set of average d u e s for the inclination angle of the magnetic field relative to the line of sight. We find that the field is oriented quite close to the plane of the sky in most places. More precisely, the inclination of the magnetic field is approx. = 73 deg around OMC-3 MMS 6, approx. = 74 deg at OMC-3 MMS 8-9, approx. = 80 deg at OMC-2 FIR 4, approx. = 65 deg in the northeastern part of OMC-1, and approx. = 49 deg in the Bas. The small difference in the inclination of the field between OMC-3 and OMC-2 seems to strengthen the idea that the orientation of the magnetic field is relatively unaffected by the agglomeration of matter located in these regions. We also present polarimetry data for the OMC-4 region located some 13 min. south of OMC-1.

Dowell, C. Darren↗

Mid-Infrared Imaging of Orion BN/KL With Keck I Telescope

We present new images of the Orion BN/KL infrared complex at 4.8, 8.0, 8.9,9.9, 10.4, 11.7, 12.5, 17.6, 18.1,20.0 and 22.0 um obtained with the 10-meter Keck I telescope, with typically 0.3 arcsec resolution at 12.5 um. The multi-wavelength observational image data is registered in a stack and a dust emission/extinction model is fitted to the resulting spectrum of each pixel to create a diffraction-limited "image" of the temperature, opacity and luminosity of the emitting dust, as well as the circumstellar and line-of-sight dust extinction. New source structure, temperature, opacity and luminosity detail is seen in the vicinity of IRc2-IRc7. The model results are used to develop a more complete picture of the structure and energetics of the BN/KL, infrared complex.

Gezari, Daniel Y.↗

Heterodyne spectroscopy of the J = 22-21 CO line in Orion

We have observed the J = 22-21 line of 12CO at 2528 GHz (118.8 micrometers) in the IRc2 region of Orion. The spectra at 0.6 km s-1 resolution show both plateau emission with FWHM approximately 35 km s-1 and a narrower component with FWHM approximately 8 km s-1. Comparison with heterodyne data of similar quality on the J = 17-16 line indicates that the broad and narrow components both originate in gas with an excitation temperature Tex approximately 600 K. The emission is consistent with the predictions of shock models in which the wide component arises from the heated outflow gas and postshock molecular material, while the narrow component comes from ambient material near the leading edge of the shock front where temperatures are high but significant acceleration has not yet occurred.

NASA Discipline Exobiology↗

Variations in the 3 micron spectrum across the Orion Bar: polycyclic aromatic hydrocarbons and related molecules

Long-slit spectra across the Orion Bar reveal significant differences in the spatial behavior of the components of the 3 microns polycyclic aromatic hydrocarbon (PAH) spectrum. The strong PAH band at 3.29 microns generally decreases exponentially with distance from the ionization front into the molecular cloud (scale height approximately 12"), although excesses appear approximately 10" and 20" behind the ionization front, close to layers of H2 and CO emission, respectively. The 3.40 microns PAH feature separates into two components with very different spatial distributions. The main component (at 3.395 microns), along with the 3.51 microns band and the PAH plateau (3.3-3.6 microns), shows excess emission approximately 10" and approximately 20" behind the ionization front, stronger than the excesses in the 3.29 microns band. The extra component of the 3.40 microns band, which peaks at approximately 3.405 microns, has a spatial distribution very similar to the H2 emission. Aromatic C-H stretches in PAHs most likely produce the 3.29 microns feature. Aliphatic C-H stretches in either attached methyl side-groups or superhydrogenated PAHs, or perhaps both, could produce the complicated spectral and spatial structure at 3.40 microns.

NASA Center ARC↗

Heterodyne spectroscopy of the J = 17-16 CO line in Orion

We have obtained high-resolution spectra of the 153 micrometers J = 17-16 CO line in the BN-KL region of Orion using a laser heterodyne spectrometer. The line shows broad wings (30 km s-1 FWHM at BN) characteristic of the plateau emission as well as a narrower component probably associated with the quiescent gas in the molecular ridge. From an analysis of the plateau emission together with that observed in lower J CO transitions, we derive an excitation temperature of 180 +/- 50 K and minimum column density of 1 x 10(18) cm-2 for CO in this component, which constitutes 80% of the total integrated intensity of the J = 17-16 line near BN. The peak intensity of the narrower component observed at 0.8 km s-1 resolution increases relative to that of the plateau component toward theta 1C and away from BN, while the width decreases from 10 to 4 km s-1 (FWHM).

NASA Discipline Number 52-60↗

The Star Formation History of Orion and its Environs

During the period of performance, we have obtained the following observations and carried out the analysis of the Orion associations itemized below: 1) Detailed analysis of newly discovered stars in strips at declinations +1 degree and -1 degree; 2) Disk evolution in the Ori OB1 association; 3) Spitzer proposal; 4) Multifiber echelle spectroscopy; 5) Slit spectroscopy of bright candidates; 6) Other multifiber spectroscopy; 7) UBVRI photometry; 8) Near and mid-IR photometry.

Calvert, Nuria↗

Emission-Line Pre-Main Sequence Stars and X-Ray Sources in Orion

we use low-resolution, broadband optical spectroscopy and high-resolution X-ray imaging to continue the study of X-ray sources in a portion of the Orion star-formation region about 1 degree south of the Trapezium.

stars: emission lines--stars: pre-main sequence-- ↗

Massive Quiescent Cores in Orion - The Core Mass Function

CMF studies to date have been largely restricted to low-mass star-forming regions. The present study focuses on a HIGH MASS star forming region, ORION, but observes positions sufficiently far from KL that effects of previously-formed massive stars are not overwhelming

molecular cloud cores↗

Analytical Investigation of Pumped Fluid Loop Radiators for Orion Spacecraft

This viewgraph presentation reviews the history of pumped fluid loop radiators used in Apollo spacecraft, and the problems and challenges for using them in the Orion Spacecraft. Included in this presentation are the issues of Flow stagnation, flow stability, for single panels and multi-panels.

Reavis, Gretchen↗

Orion-CEV Project Overview To the NASA Sports and Exploration "Kick-Off" Meeting

This viewgraph presentation reviews the Orion Crew Exploration vehicle (CEV) and its usage in the exploration of the moon and subsequent travel to Mars. Schedules for development and testing of the CEV are shown. Also displayed are various high level design views of the CEV, the launch abort system, the Atlas Docking adapter, and the service module.

Marshall, Paul F.↗

Orion Entry, Descent, and Landing Performance and Mission Design

The Orion Vehicle is the next spacecraft to take humans into space and will include missions to ISS as well as missions to the Moon. As part of that challenge, the vehicle will have to accommodate multiple mission design concepts, since return from Low Earth Orbit and return from the Moon can be quite different. Commonality between the different missions as it relates to vehicle systems, guidance capability, and operations concepts is the goal. Several unique mission design concepts include the specification of multiple land-based landing sites for a vehicle with closed-loop direct and skip entry guidance, followed by a parachute descent and landing attenuation system. This includes the ability of the vehicle to accurately target and land at a designated landing site, including site location aspects, landing site size, and landing opportunities assessments. Analyses associated with these mission design and flight performance challenges and constraints will be discussed as well as potential operational concepts to provide feasibility and/or mission commonality.

Broome, Joel M.↗

Orion Entry Flight Control Stability and Performance

The Orion Spacecraft will be required to perform entry and landing functions for both Low Earth Orbit (LEO) and Lunar return missions, utilizing only the Command Module (CM) with its unique systems and GN&C design. This paper presents the current CM Flight Control System (FCS) design to support entry and landing, with a focus on analyses that have supported its development to date. The CM FCS will have to provide for spacecraft stability and control while following guidance or manual commands during exo-atmospheric flight, after Service Module separation, translational powered flight required of the CM, atmospheric flight supporting both direct entry and skip trajectories down to drogue chute deploy, and during roll attitude reorientation just prior to touchdown. Various studies and analyses have been performed or are on-going supporting an overall FCS design with reasonably sized Reaction Control System (RCS) jets, that minimizes fuel usage, that provides appropriate command following but with reasonable stability and control margin. Results from these efforts to date are included, with particular attention on design issues that have emerged, such as the struggle to accommodate sub-sonic pitch and yaw control without using excessively large jets that could have a detrimental impact on vehicle weight. Apollo, with a similar shape, struggled with this issue as well. Outstanding CM FCS related design and analysis issues, planned for future effort, are also briefly be discussed.

Strahan, Alan L.↗

Evaluation of a Seat Attenuation System for the Orion Crew Module

The function of the crew seat attenuation system for the Orion Crew Module (CM) is to provide the crew with a low injury-risk landing environment under a range of crew configurations and landing conditions. The current design for the seat attenuation system provides the crew with a low risk of injury environment based on the Brinkley criteria for most of the landing conditions considered. Furthermore, the stroking of the seat attenuation system is within limits, and the clearance between the seat support platform and vehicle is not exceeded. For the limited number of landing conditions where a low injury risk is exceeded, the risk is never beyond a moderate level. The results presented in this study are based on a CM structural model that is rigid except for the pallet struts, which attenuate landing loads and reduce the accelerations transferred to the astronauts. The CM simulations include a soft soil landing. Several different crew configurations are evaluated in this study. It is expected that situations where the risk is above low can be eliminated in future design iterations.

Lawrence, Charles↗