Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY RIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Gel stretch method: a new method to measure constitutive properties of cardiac muscle cells

Diastolic dysfunction is an important cause of congestive heart failure; however, the basic mechanisms causing diastolic congestive heart failure are not fully understood, especially the role of the cardiac muscle cell, or cardiocyte, in this process. Before the role of the cardiocyte in this pathophysiology can be defined, methods for measuring cardiocyte constitutive properties must be developed and validated. Thus this study was designed to evaluate a new method to characterize cardiocyte constitutive properties, the gel stretch method. Cardiocytes were isolated enzymatically from normal feline hearts and embedded in a 2% agarose gel containing HEPES-Krebs buffer and laminin. This gel was cast in a shape that allowed it to be placed in a stretching device. The ends of the gel were held between a movable roller and fixed plates that acted as mandibles. Distance between the right and left mandibles was increased using a stepper motor system. The force applied to the gel was measured by a force transducer. The resultant cardiocyte strain was determined by imaging the cells with a microscope, capturing the images with a CCD camera, and measuring cardiocyte and sarcomere length changes. Cardiocyte stress was characterized with a finite-element method. These measurements of cardiocyte stress and strain were used to determine cardiocyte stiffness. Two variables affecting cardiocyte stiffness were measured, the passive elastic spring and viscous damping. The passive spring was assessed by increasing the force on the gel at 1 g/min, modeling the resultant stress vs. strain relationship as an exponential [sigma = A/k(ekepsilon - 1)]. In normal cardiocytes, A = 23.0 kN/m2 and k = 16. Viscous damping was assessed by examining the loop area between the stress vs. strain relationship during 1 g/min increases and decreases in force. Normal cardiocytes had a finite loop area = 1.39 kN/m2, indicating the presence of viscous damping. Thus the gel stretch method provided accurate measurements of cardiocyte constitutive properties. These measurements have allowed the first quantitative assessment of passive elastic spring properties and viscous damping in normal mammalian cardiocytes.

Non-NASA Center↗

Microstructure, crystallographic texture and mechanical properties of friction stir welded AA2017A

In this study a thick section (20 mm) friction stir welded AA2017A-T451 has been characterized in terms of microstructure, crystallographic texture and mechanical properties. For microstructural analysis both optical and scanning electron microscopes have been used. A detailed crystallographic texture analysis has been carried out using the electron back scattering diffraction technique. Crystallographic texture has been examined in both shoulder and probe affected regions of the weld NG. An entirely weak texture is observed at the shoulder affected region which is mainly explained by the effect of the sequential multi pass deformation experienced by both tool probe and tool shoulder. The texture in the probe dominated region at the AS side of the weld is relatively weak but still assembles the simple shear texture of FCC metals with B/B{sup Macron} and C components existing across the whole map. However, the texture is stronger at the RS than at the AS of the weld, mainly dominated byB/B{sup Macron} components and with C component almost absent across the map. An alternating bands between (B) components and (B{sup Macron }) component are observed only at the AS side of the weld. - Highlights: Black-Right-Pointing-Pointer Detailed investigation of microstructure and crystallographic texture. Black-Right-Pointing-Pointer The grain size is varied from the top to the bottom of the NG. Black-Right-Pointing-Pointer An entirely weak texture is observed at the shoulder affected region. Black-Right-Pointing-Pointer The texture in the probe affected region is dominated by simple shear texture.

36 MATERIALS SCIENCE↗

Thermoelectric properties of the Ru{sub 2}Ni{sub 2}Sb{sub 12} ternary skutterudite

The synthesis of the Ru{sub 2-x}Ni{sub 2-x}Sb{sub 12} compounds (0{<=}x{<=}0.2), their structural characterization and temperature dependencies of selected transport and thermal properties are reported. At x=0, Ru{sub 2-x}Ni{sub 2-x}Sb{sub 12} displays cubic symmetry, space group Im3{sup Macron} with lattice parameter a=9.1767(1) A. From increasing electrical conductivity above 600 K the band gap (E{sub g}{approx}0.06 eV) was estimated using an Arrhenius plot. Different signs of the Seebeck coefficient (negative) and the Hall coefficient (positive) have been explained as a consequence of a multicarrier transport. The substitution on a cation site, i.e., formation of the Ru{sub 2-x}Ni{sub 2-x}Sb{sub 12} ternary skutterudites proved to be effective way in suppressing of the thermal conductivity. - Graphical abstract: Polyhedral representation of the Ru{sub 2}Ni{sub 2}Sb{sub 12} skutterudite crystal structure emphasizing the [(Ru/Ni)Sb{sub 6}] corner-sharing octahedra. Highlights: Black-Right-Pointing-Pointer Skutterudite-type structure with space group Im3{sup Macron} of the Ru{sub 2}Ni{sub 2}Sb{sub 12} was confirmed. Black-Right-Pointing-Pointer The band gap of the studied compounds was estimated - E{sub g}{approx}0.06 eV. Black-Right-Pointing-Pointer Low lattice thermal conductivity of the Ru{sub 2}Ni{sub 2}Sb{sub 12} was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and in-depth analysis of highly ordered yttrium doped hydroxyapatite nanorods prepared by hydrothermal method and its mechanical analysis

In this study, undoped and yttrium (Y) doped nanocrystalline hydroxyapatite crystals were synthesized by the hydrothermal method at 180 Degree-Sign C for 24 h. Highly ordered and oriented hydroxyapatite (HAp) nanorods were prepared by yttrium doping and their nanostructure and physical properties were compared with those of undoped HAp rods. FESEM images showed that the doping with Y ions reduced the diameter (from 25 nm to 15 nm) and increased the length (from 95 nm to 115 nm) of the synthesized rods. The aspect ratio of the undoped and Y-doped nanorods were calculated to be 4.303 (SD = 0.0959) and 7.61 (SD = 0.0355), respectively. Specific surface area (SSA) analysis showed that SSA also increased from 66.74 m{sup 2}/g to 68.57 m{sup 2}/g with the addition of yttrium. Y-doped HAp nanorod reinforced HMWPE composites displayed the better mechanical performance than those reinforced with pure HAp nanorods. The possible strengthening of nanorods and the increase of SSA due to the reduction in the size of nanorods in the presence of yttrium may have contributed to the strengthening of Y-doped HAp/HMWPE composites. - Graphical Abstract: Highly ordered and oriented yttrium doped hydroxyapatite (HAp) nanorods were prepared by hydrothermal method. For undoped HAp the average length of the nanorod is 95 nm with mean diameter of 24 nm and for a Y doped nanorod the average length is {approx} 115 nm and the mean diameter is 15 nm. Mechanical analysis was carried out by polymer/nanoparticle composite method. Highlights: Black-Right-Pointing-Pointer Yttrium doped hydroxyapatite nanorods were prepared by hydrothermal method. Black-Right-Pointing-Pointer The nanorods have highly uniform size distribution. Black-Right-Pointing-Pointer Yttrium substitution and nanostructure formation was confirmed by careful analysis. Black-Right-Pointing-Pointer Mechanical strength was analyzed by polymer nanoparticle reinforcement method.

36 MATERIALS SCIENCE↗

Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn-3.5Ag-xTi active solders

Active solders Sn-3.5Ag-xTi varied from x = 0 to 6 wt.% Ti addition were prepared by vacuum arc re-melting and the resultant phase formation and variation of microstructure with titanium concentration were analyzed using X-ray diffraction, optical microscopy and scanning electron microscopy. The Sn-3.5Ag-xTi active solders are used as metallic filler to join with anodized 6061 Al alloy for potential applications of providing a higher heat conduction path. Their joints and mechanical properties were characterized and evaluated in terms of titanium content. The mechanical property of joints was measured by shear testing. The joint strength was very dependent on the titanium content. Solder with a 0.5 wt.% Ti addition can successfully wet and bond to the anodized aluminum oxide layers of Al alloy and posses a shear strength of 16.28 {+-} 0.64 MPa. The maximum bonding strength reached 22.24 {+-} 0.70 MPa at a 3 wt.% Ti addition. Interfacial reaction phase and chemical composition were identified by a transmission electron microscope with energy dispersive spectrometer. Results showed that the Ti element reacts with anodized aluminum oxide to form Al{sub 3}Ti-rich and Al{sub 3}Ti phases at the joint interfaces. - Highlights: Black-Right-Pointing-Pointer Active solder joining of anodized Al alloy needs 0.5 wt.% Ti addition for Sn-3.5Ag. Black-Right-Pointing-Pointer The maximum bonding strength occurs at 3 wt.% Ti addition. Black-Right-Pointing-Pointer The Ti reacts with anodized Al oxide to form Al{sub 3}Ti-rich and Al{sub 3}Ti at joint interface.

36 MATERIALS SCIENCE↗

Synthesis of ZnTe dendrites on multi-walled carbon nanotubes/polyimide nanocomposite membrane by electrochemical atomic layer deposition and photoelectrical property research

We report on the electrochemical atomic layer deposition (EC-ALD) of ZnTe dendrites on the carboxyl-functionalized multi-walled carbon nanotubes/polyimide (COOH-MWCNTs/PI) membrane. Electrochemical characteristics were studied by cyclic voltammetry (CV) and the deposition of ZnTe dendrites was completed using amperometric method (I-t). The prepared ZnTe dendrites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The growth mechanism of ZnTe dendrites was elucidated to give a deep understanding of crystal growth. The concentration of reagents and deposition cycle had a significant effect on the morphology and structure of deposits. UV-vis transmission study indicated a direct band gap of 2.26 eV. Photoelectrical measurement confirmed the p-type conductivity of ZnTe dendrites, which indicated that the dendritic ZnTe crystals may have potential practical application in optoelectronic devices. - Graphical abstract: Representative SEM images of ZnTe dendrites. (a) Panorama of ZnTe dendrites; (b) a single dendrite. The regular branches appeared like leaves and showed a parallel arrangement layer upon layer between each other. Highlights: Black-Right-Pointing-Pointer ZnTe dendrites were successfully synthesized on CNTs/PI membrane by electrodeposition. Black-Right-Pointing-Pointer The growth mechanism of ZnTe dendritic structures was investigated in detail. Black-Right-Pointing-Pointer The concentration and deposition cycle greatly affected the morphology of ZnTe. Black-Right-Pointing-Pointer OCP and I-t studies showed that ZnTe can be beneficial to photoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probabilistic assessment of cloud fraction using Bayesian blending of independent datasets: Feasibility study of a new method

We describe and evaluate a novel method to blend two observed cloud fraction (CF) datasets through Bayesian posterior estimation. The research reported here is a feasibility study designed to explore the method. In this proof‐of‐concept study, we illustrate the approach using specific observational datasets from the U. S. Department of Energy Atmospheric Radiation Measurement Program's Southern Great Plains site in the central United States, but the method is quite general and is readily applicable to other datasets. The total sky image (TSI) camera observations are used to determine the prior distribution. A regression model and the active remote sensing of clouds (ARSCL) radar/lidar observations are used to determine the likelihood function. The posterior estimate is a probability density function (pdf) of the CF whose mean is taken to be the optimal blend of the two observations. The data at hourly, daily, 5‐day, monthly, and annual time scales are considered. Some physical and probabilistic properties of the CFs are explored from radar/lidar, camera, and satellite observations and from simulations using the Community Atmosphere Model (CAM5). Our results imply that (a) the Beta distribution is a reasonable model for CF for both short‐ and long‐time means, the 5‐day data are skewed right, and the annual data are almost normally distributed, and (b) the Bayesian method developed successfully yields a pdf of CF, rather than a deterministic CF value, and it is feasible to blend the TSI and ARSCL data with a capability for bias correction.

58 GEOSCIENCES↗

Cyanide binding to human plasma heme-hemopexin: A comparative study

Highlights: Black-Right-Pointing-Pointer Cyanide binding to ferric HHPX-heme-Fe. Black-Right-Pointing-Pointer Cyanide binding to ferrous HHPX-heme-Fe. Black-Right-Pointing-Pointer Dithionite-mediated reduction of ferric HHPX-heme-Fe-cyanide. Black-Right-Pointing-Pointer Cyanide binding to HHPX-heme-Fe is limited by ligand deprotonation. Black-Right-Pointing-Pointer Cyanide dissociation from HHPX-heme-Fe-cyanide is limited by ligand protonation. -- Abstract: Hemopexin (HPX) displays a pivotal role in heme scavenging and delivery to the liver. In turn, heme-Fe-hemopexin (HPX-heme-Fe) displays heme-based spectroscopic and reactivity properties. Here, kinetics and thermodynamics of cyanide binding to ferric and ferrous hexa-coordinate human plasma HPX-heme-Fe (HHPX-heme-Fe(III) and HHPX-heme-Fe(II), respectively), and for the dithionite-mediated reduction of the HHPX-heme-Fe(III)-cyanide complex, at pH 7.4 and 20.0 Degree-Sign C, are reported. Values of thermodynamic and kinetic parameters for cyanide binding to HHPX-heme-Fe(III) and HHPX-heme-Fe(II) are K = (4.1 {+-} 0.4) Multiplication-Sign 10{sup -6} M, k{sub on} = (6.9 {+-} 0.5) Multiplication-Sign 10{sup 1} M{sup -1} s{sup -1}, and k{sub off} = 2.8 Multiplication-Sign 10{sup -4} s{sup -1}; and H = (6 {+-} 1) Multiplication-Sign 10{sup -1} M, h{sub on} = 1.2 Multiplication-Sign 10{sup -1} M{sup -1} s{sup -1}, and h{sub off} = (7.1 {+-} 0.8) Multiplication-Sign 10{sup -2} s{sup -1}, respectively. The value of the rate constant for the dithionite-mediated reduction of the HHPX-heme-Fe(III)-cyanide complex is l = 8.9 {+-} 0.8 M{sup -1/2} s{sup -1}. HHPX-heme-Fe reactivity is modulated by proton acceptor/donor amino acid residue(s) (e.g., His236) assisting the deprotonation and protonation of the incoming and outgoing ligand, respectively.

60 APPLIED LIFE SCIENCES↗

Effect of tungsten addition on the toughness and hardness of Fe{sub 2}B in wear-resistant Fe-B-C cast alloy

The effects of tungsten additions of 0%, 1.12%, 2.04%, and 3.17% (in wt.%) on the morphology, fracture toughness and micro-hardness of Fe{sub 2}B in Fe-B-C cast alloy were investigated. The results indicate that, with the increase of tungsten addition, the morphology and distribution of Fe{sub 2}B have no change and a new W-containing phase, except the (Fe, W){sub 2}B with a certain tungsten solution, does not form, and that the fracture toughness of Fe{sub 2}B increases first and then decreases, while the hardness increases first and then has a little change. Compared with the fracture toughness (3.8 MPa{center_dot}m{sup 1/2}) of Fe{sub 2}B without tungsten addition, the toughness at 2.04 wt.% tungsten can be improved by about above 80% and achieves about 6.9 MPa{center_dot}m{sup 1/2}, and variation characteristics of hardness and toughness of Fe{sub 2}B were also testified by viewing the indentation marks and cracks on the Fe{sub 2}B, respectively. - Highlights: Black-Right-Pointing-Pointer Poor toughness of Fe2B decreases obviously the wear resistance of the alloy. Black-Right-Pointing-Pointer As W content increases, Fe2B's toughness increases first and then decreases. Black-Right-Pointing-Pointer As W content increases, Fe2B's hardness first increases and then has little change. Black-Right-Pointing-Pointer The toughness at 2.04 % W can be improved by above 80% more than that at 0% W.

36 MATERIALS SCIENCE↗

DO QUASAR BROAD-LINE VELOCITY WIDTHS ADD ANY INFORMATION TO VIRIAL BLACK HOLE MASS ESTIMATES?

We examine how much information measured broad-line widths add to virial black hole (BH) mass estimates for flux-limited samples of quasars. We do this by comparing the BH mass estimates to those derived by randomly reassigning the quasar broad-line widths to different objects and re-calculating the BH mass. For 9000 BH masses derived from the H{beta} line we find that the distributions of original and randomized BH masses in the M{sub BH}-redshift plane and the M{sub BH}-luminosity plane are formally identical. A two-dimensional Kolmogorov-Smirnov test does not find a difference at >90% confidence. For the Mg II line (32,000 quasars) we do find very significant differences between the randomized and original BH masses, but the amplitude of the difference is still small. The difference for the C IV line (14,000 quasars) is 2{sigma}-3{sigma} and again the amplitude of the difference is small. Subdividing the data into redshift and luminosity bins we find that the median absolute difference in BH mass between the original and randomized data is 0.025, 0.01, and 0.04 dex for H{beta}, Mg II, and C IV, respectively. The maximum absolute difference is always {<=}0.1 dex. We investigate whether our results are sensitive to corrections to Mg II virial masses, such as those suggested by Onken and Kollmeier. These corrections do not influence our results, other than to reduce the significance of the difference between original and randomized BH masses to only 1{sigma}-2{sigma} for Mg II. Moreover, we demonstrate that the correlation between mass residuals and Eddington ratio discussed by Onken and Kollmeier is more directly attributable to the slope of the relation between H{beta} and Mg II line width. The implication is that the measured quasar broad-line velocity widths provide little extra information, after allowing for the mean velocity width. In this case virial estimates are equivalent to M{sub BH}{proportional_to}L{sup {alpha}}, with L/L{sub Edd}{proportional_to}L{sup 1-{alpha}} (with {alpha} {approx_equal} 0.5). This leaves an unanswered question of why the accretion efficiency changes with luminosity in just the right way to keep the mean broad-line widths fixed as a function of luminosity.

79 ASTRONOMY AND ASTROPHYSICS↗

Hamiltonian thermodynamics of three-dimensional dilatonic black holes

The action for a class of three-dimensional dilaton-gravity theories with a negative cosmological constant can be recast in a Brans-Dicke type action, with its free {omega} parameter. These theories have static spherically symmetric black holes. Those with well formulated asymptotics are studied through a Hamiltonian formalism, and their thermodynamical properties are found out. The theories studied are general relativity ({omega}{yields}{infinity}), a dimensionally reduced cylindrical four-dimensional general relativity theory ({omega}=0), and a theory representing a class of theories ({omega}=-3). The Hamiltonian formalism is set up in three dimensions through foliations on the right region of the Carter-Penrose diagram, with the bifurcation 1-sphere as the left boundary, and anti-de Sitter infinity as the right boundary. The metric functions on the foliated hypersurfaces are the canonical coordinates. The Hamiltonian action is written, the Hamiltonian being a sum of constraints. One finds a new action which yields an unconstrained theory with one pair of canonical coordinates (M,P{sub M}), M being the mass parameter and P{sub M} its conjugate momenta The resulting Hamiltonian is a sum of boundary terms only. A quantization of the theory is performed. The Schroedinger evolution operator is constructed, the trace is taken, and the partition function of the canonical ensemble is obtained. The black hole entropies differ, in general, from the usual quarter of the horizon area due to the dilaton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variations of electron distribution functions in the solar wind

Variations of electron distribution functions in the solar wind have been investigated using the electron data observed aboard Helios 2 during the first four months of its mission in 1976 in the distance range between 0.3 and 1 AU. In particular, variations across the sector structure of the interplanetary magnetic field and across the plasma stream structures have been studied. It has been found that there is a strong correlation between the electron properties and the sector structure of the magnetic field. Within the interior of magnetic sectors the electron distribution functions are extremely anisotropic and skewed with respect to the magnetic field direction at high particle energies. Toward sector boundaries the electron distribution functions become less anisotropic and less skewed. Right at sector boundaries the electrons are relatively cool, and their distributions are nearly isotropic often showing a slight bidirectional anisotropy. These observations have been interpreted to indicate that scattering of electrons with energies above 100 eV is weak within the interior of magnetic sectors but anomalous scattering increases drastically toward sector boundaries for all energies in the halo regime up to several hundred eV. There is evidence for closed magnetic field structures, probably occurring frequently in the solar wind, where the magnetic field lines should usually be connected to the sun outside sector boundaries but may or may not be disconnected from the sun at sector boundaries.

Pilipp, W. G.↗

Modeling the Self-organized Critical Behavior of the Plasma Sheet Reconnection Dynamics

Analyses of Polar UVI auroral image data reviewed in our other presentation at this meeting (V. Uritsky, A. Klimas) show that bright night-side high-latitude UV emissions exhibit so many of the key properties of systems in self-organized criticality (SOC) that an alternate interpretation has become virtually impossible. It is now necessary to find and model the source of this behavior. We note that the most common models of self-organized criticality are numerical sandpiles. These are, at root, models that govern the transport of some quantity from a region where it is loaded to another where it is unloaded. Transport is enabled by the excitation of a local threshold instability; it is intermittent and bursty, and it exhibits a number of scale-free statistical properties. Searching for a system in the magnetosphere that is analogous and that, in addition, is known to produce auroral signatures, we focus on the reconnection dynamics of the plasma sheet. In our previous work, a driven reconnection model has been constructed and has been under study. The transport of electromagnetic (primarily magnetic) energy carried by the Poynting flux into the reconnection region of the model has been examined. All of the analysis techniques, and more, that have been applied to the auroral image data have also been applied to this Poynting flux. Here, we report new results showing that this model also exhibits so many of the key properties of systems in self-organized criticality that an alternate interpretation is implausible. Further, we find a strong correlation between these key properties of the model and those of the auroral UV emissions. We suggest that, in general, the driven reconnection model is an important step toward a realistic plasma physical model of self-organized criticality and we conclude, more specifically, that it is also a step in the right direction toward modeling the multiscale reconnection dynamics of the magnetotail.

Klimas, Alex↗

Structure and magnetic properties of Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15}, a new 10H-polytype in the Ba-Ce-Mn-O system

Based on the peculiar magnetic properties that are observed in pseudo one-dimensional manganites, we decided to synthesize the new Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} compound. The preparation was performed by solid state reaction in air at about 1350 Degree-Sign C, for which we found that the compound crystallizes in a hexagonal symmetry with space group P6{sub 3}/mmc (No-194) and cell parameters a=b=5.7861(2) A and c=23.902(1) A. The structural description was correlated with neutron diffraction and bond valence calculations, confirming the presence of Ce{sup 4+} and Mn{sup 4+} segregated in the different crystallographic positions. Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} displays evidence for strong AFM couplings already set at room temperature. The main arrangement of Mn{sup 4+} in magnetically isolated tetramers of face-sharing octahedra is responsible for a metamagnetic-like transition around 50 K. - Graphical abstract: The new Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} polytype shows strong AFM couplings in magnetically isolated [Ce{sub 0.25}Mn{sub 3.75}O{sub 15}] tetramers of face-sharing octahedral, resulting in a metamagnetic-like transition around 50 K. Highlights: Black-Right-Pointing-Pointer Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15}, a new 10H polytype, has been prepared in the Ba-Ce-Mn-O system. Black-Right-Pointing-Pointer The compound crystallizes in the P6{sub 3}/mmc space group with (cchhh){sub 2} stacking sequence. Black-Right-Pointing-Pointer [Ce{sub 0.25}Mn{sub 3.75}O{sub 15}] tetramers are separated by [CeO{sub 6}] octahedra in the structure. Black-Right-Pointing-Pointer Instead of robust AFM ordering, a metamagnetic-like transition is found around 50 K.

36 MATERIALS SCIENCE↗

Solvothermal synthesis and study of nonlinear optical properties of nanocrystalline thallium doped bismuth telluride

Nanocrystalline Bismuth telluride and thallium (4 mol %) doped Bismuth telluride were synthesized through hydrothermal method. The as-prepared products were characterized using Powder X-ray Diffraction, High Resolution Transmission Electron Microscopy, Energy Dispersive X-Ray Spectroscopy, UV-Visible spectroscopy and Fourier Transform Infrared Spectroscopy. Powder XRD results revealed the crystalline nature of the obtained phases. HRTEM showed the particle-like morphology of the products. The decrease in the absorption coefficient due to thallium doping was observed in FTIR spectra. The intensity dependent nonlinear optical properties of nanocrystalline bismuth telluride and thallium doped bismuth telluride were studied using the Z-scan technique in open-aperture configuration. Bismuth telluride doped with thallium showed enhanced nonlinear optical response compared to pristine bismuth telluride and hence could be used as a potential candidate for optical power limiting applications. - Graphical Abstract: Nonlinear transmission (Z-scan) curves of nanocrystalline bismuth telluride ({Delta}) and thallium doped bismuth telluride ({open_square}). Thallium doped bismuth telluride showed enhanced nonlinear absorption compared to bismuth telluride. Inset: TEM micrograph of bismuth telluride nanocrystallites. Highlights: Black-Right-Pointing-Pointer Synthesis of Nanocrystalline Bi{sub 2}Te{sub 3} and Thallium doped Bi{sub 2}Te{sub 3} through solvothermal method. Black-Right-Pointing-Pointer Reduced absorption coefficient due to thallium doping found from IR spectroscopy. Black-Right-Pointing-Pointer Open-aperture Z-scan technique for nonlinear optical studies. Black-Right-Pointing-Pointer Two photon absorption based model for theoretical fitting of Z-scan data. Black-Right-Pointing-Pointer Enhanced nonlinear absorption in Thallium doped Bi{sub 2}Te{sub 3} - potential candidate for optical power limiting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, electronic and optical properties of orthorhombic CdGeO{sub 3} from first principles calculations

Orthorhombic perovskite CdGeO{sub 3} was studied using the density-functional theory (DFT) formalism. The electronic band structure, density of states, effective masses, dielectric function and optical absorption were obtained. Comparing with orthorhombic CaGeO{sub 3}, which is an indirect S->GAMMA gap material, the substitution of calcium by cadmium changes the valence band maximum from the S point to the GAMMA point in reciprocal space, and decreases the Kohn-Sham band gap energy. Our results suggest that orthorhombic CdGeO{sub 3} has features of a semiconductor and is potentially useful for optoelectronic applications. - Abstract: Graphical Abstract Legend (TOC Figure): Different views of the unit cell of orthorhombic CdGeO{sub 3} (left, top). The electronic band structure near the main gap and the partial density of states (PDOS) are shown also (right), as well as the optical absorption for different polarizations of incident light (left, bottom).

36 MATERIALS SCIENCE↗

Magnetic property enhancement and characterization of nano-structured barium ferrite by mechano-thermal treatment

In this research a mixture of barium ferrite and graphite powders was milled in a planetary ball mill and then heat treated in vacuum to produce BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} and Fe/Fe{sub 3}O{sub 4} magnetic nano-composites. The effects of milling time and heat treatment temperature on the characteristics of powder mixture were investigated by X-ray diffraction analysis, vibrating sample magnetometer, transmission electron microscopy and Moessbauer spectroscopy. Phase analysis results showed that Fe{sub 2}O{sub 3} in barium ferrite partially reduced to Fe{sub 3}O{sub 4} during milling; hence, the reduced phase and remaining barium ferrite formed a nano-composite of BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} after 20 h of milling. Heat treatment of the 40 h milled samples at 750-900 Degree-Sign C resulted in formation of Fe containing nano-composite. Magnetic measurements indicated that the coercivity of 267.92 Oe for 40 h milled sample decreased to 22.57 Oe by heat treatment at 900 Degree-Sign C, while its saturation magnetization increased from 31.56 to 169.43 emu/g due to the formation of Fe nano-crystallites. - Highlights: Black-Right-Pointing-Pointer Barium hexaferrite and graphite were treated mechano-thermally. Black-Right-Pointing-Pointer After 20 h milling, a nano-composite of BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} formed. Black-Right-Pointing-Pointer Heat treatment of milled sample resulted in formation of Fe/Fe{sub 3}O{sub 4} composite. Black-Right-Pointing-Pointer Increasing heat treatment temperature results in higher saturation magnetization. Black-Right-Pointing-Pointer The milled and heat treated samples were nano-crystalline.

36 MATERIALS SCIENCE↗

On Stability of Linear Systems with Impulsive Action at the Matrix

We discuss properties of stability and asymptotic stability of solutions to linear systems of differential equations with generalized actions in matrices of systems. We obtain sufficient conditions that guarantee the stability and asymptotic stability of solutions to these system. A distinctive feature of systems considered is the fact that the right-hand sides of systems contain the ill-posed operation of multiplication of discontinuous functions by generalized functions.

97 MATHEMATICS AND COMPUTING↗