Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle stack”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

HEP Software Foundation Community White Paper Working Group - Data Processing Frameworks

Data processing frameworks are an essential part of HEP experiments' software stacks. Frameworks provide a means by which code developers can undertake the essential tasks of physics data processing, accessing relevant inputs and storing their outputs, in a coherent way without needing to know the details of other domains. Frameworks provide essential core services for developers and help deliver a configurable working application to the experiments' production systems. Modern HEP processing frameworks are in the process of adapting to a new computing landscape dominated by parallel processing and heterogeneity, which pose many questions regarding enhanced functionality and scaling that must be faced without compromising the maintainability of the code. In this paper we identify a program of work that can help further clarify the key concepts of frameworks for HEP and then spawn R&D activities that can focus the community's efforts in the most efficient manner to address the challenges of the upcoming experimental program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Tynode: A new vacuum electron multiplier

By placing, in vacuum, a stack of transmission dynodes (tynodes) on top of a CMOS pixel chip, a single free electron detector could be made with outstanding performance in terms of spatial and time resolution. The essential object is the tynode: an ultra thin membrane, which emits, at the impact of an energetic electron on one side, a multiple of electrons at the other side. The electron yields of tynodes have been calculated by means of GEANT-4 Monte Carlo simulations, applying special low-energy extensions. The results are in line with another simulation based on a continuous charge-diffusion model. By means of Micro Electro Mechanical System (MEMS) technology, tynodes and test samples have been realized. The secondary electron yield of several samples has been measured in three different setups. Finally, several possibilities to improve the yield are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phonon instability and self-organized structures in multilayer stacks of confined dipolar Bose-Einstein condensates in optical lattices

In calculations to date [D.-W. Wang and E. Demler, e-print arXiv:0812.1838; M. Klawunn and L. Santos, Phys. Rev. A 80, 013611 (2009)] of multilayer stacks of dipolar condensates, created in one-dimensional optical lattices, the condensates have been assumed to be two dimensional. In a real experiment, however, the condensates do not extend to infinity in the oblate direction, but have to be confined by a trap potential, too. By three-dimensional numerical simulations of this realistic experimental situation we find a crucial dependence of the phonon instability boundary on the number of layers. Moreover, near the boundary of the phonon instability, a variety of structured ground-state wave functions emerges, which may indicate the onset of a roton instability [S. Ronen, D. C. E. Bortolotti, and J. L. Bohn, Phys. Rev. Lett. 98, 030406 (2007); R. M. Wilson, S. Ronen, J. L. Bohn, and H. Pu, Phys. Rev. Lett. 100, 245302 (2008)]. We also consider the effect of a variable number of atoms per layer on the appearance of the phonon instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

HUBBLE SPACE TELESCOPE IMAGING OF Ly{alpha} EMISSION AT z {approx} 4.4

We present the highest redshift detections of resolved Ly{alpha} emission, using Hubble Space Telescope (HST)/Advanced Camera for Surveys F658N narrowband-imaging data taken in parallel with the Wide Field Camera 3 Early Release Science program in the GOODS Chandra Deep Field-South. We detect Ly{alpha} emission from three spectroscopically confirmed z = 4.4 Ly{alpha} emitting galaxies (LAEs), more than doubling the sample of LAEs with resolved Ly{alpha} emission. Comparing the light distribution between the rest-frame ultraviolet continuum and narrowband images, we investigate the escape of Ly{alpha} photons at high redshift. While our data do not support a positional offset between the Ly{alpha} and rest-frame ultraviolet (UV) continuum emission, the half-light radius in one out of the three galaxies is significantly (>1{sigma}) larger in Ly{alpha} than in the rest-frame UV continuum. Stacking the three LAEs in both the narrowband and UV continuum images, we find that the Ly{alpha} light appears larger than the rest-frame UV at 4.2{sigma} significance. This Ly{alpha} flux detected with HST is a factor of 4-10 less than observed in similar filters from the ground. These results together imply that the Ly{alpha} emission is not strictly confined to its indigenous star-forming regions. Rather, for at least one object the Ly{alpha} emission is more extended, with the missing HST flux possibly existing in a diffuse outer halo. This suggests that the radiative transfer of Ly{alpha} photons in high-redshift LAEs is complicated, with the interstellar-medium geometry and/or outflows playing a significant role in galaxies at these redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Visualization Tools for Lattice QCD - Final Report

Our research project is about the development of visualization tools for Lattice QCD. We developed various tools by extending existing libraries, adding new algorithms, exposing new APIs, and creating web interfaces (including the new NERSC gauge connection web site). Our tools cover the full stack of operations from automating download of data, to generating VTK files (topological charge, plaquette, Polyakov lines, quark and meson propagators, currents), to turning the VTK files into images, movies, and web pages. Some of the tools have their own web interfaces. Some Lattice QCD visualization have been created in the past but, to our knowledge, our tools are the only ones of their kind since they are general purpose, customizable, and relatively easy to use. We believe they will be valuable to physicists working in the field. They can be used to better teach Lattice QCD concepts to new graduate students; they can be used to observe the changes in topological charge density and detect possible sources of bias in computations; they can be used to observe the convergence of the algorithms at a local level and determine possible problems; they can be used to probe heavy-light mesons with currents and determine their spatial distribution; they can be used to detect corrupted gauge configurations. There are some indirect results of this grant that will benefit a broader audience than Lattice QCD physicists.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis, crystal structure and optical investigation of the new phosphates: Na{sub 7}Mg{sub 13}Ln(PO{sub 4}){sub 12} (Ln=La, Eu)

Two new isostructural rare earth phosphates Na{sub 7}Mg{sub 13}Ln(PO{sub 4}){sub 12} (Ln=La, Eu) have been synthesized and investigated by X-ray diffraction and optical measurements. They crystallize in the orthorhombic system with the Cmc2{sub 1} space group (Z=4). The crystal structure exhibits a new type of framework built up from LnO{sub 8} (Ln=La, Eu), MO{sub 6} (M=0.5Mg+0.5Na) and MgO{sub x} (x=5, 6) polyhedra and PO{sub 4} tetrahedra linked by common corner, edge or face. It can be described in terms of [Mg{sub 4}MP{sub 4}O{sub 22}]{sub {infinity}} layers stacked along the a direction. These layers are interconnected by [Mg{sub 4}LnP{sub 4}O{sub 36}]{sub {infinity}} undulating chains spreading along the b direction. This framework delimits 6 distinct cavities occupied by Na{sup +} cations. The results of the optical study of Na{sub 7}Mg{sub 13}La{sub 1-x}Eu{sub x}(PO{sub 4}){sub 12} (x=0, 0.02, 0.1, 1) reveal the presence of two different Eu{sup 3+} ion environments whereas the X-ray study predicts the existence of only one Eu site. This difference can be explained by the possible presence of the europium element in the sodium sites with small occupancies which cannot be detected by the X-ray structural determination. - Graphical abstract: Emission spectra of Na{sub 7}Mg{sub 13}Eu(PO{sub 4}){sub 12} and Na{sub 7}Mg{sub 13}La{sub 0.9}Eu{sub 0.1}(PO{sub 4}){sub 12} compounds for {lambda}{sub exc}=240, 290 and 393.2 nm.

36 MATERIALS SCIENCE↗

Fermilab Recycler Collimation System Design

To provide 700 kW proton beams for neutrino production in the NuMI facility, we employ slip stacking in the Recycler with transfer to the Main Injector for recapture and acceleration. Slip stacking with 12 Booster batches per 1.33 sec cycle of the Main Injector has been implemented and briefly tested while extensive operation with 8 batches and 10 batches per MI cycle has been demonstrated. Operation in this mode since 2013 shows that loss localization is an essential component for long term operation. Beam loss in the Recycler will be localized in a collimation region with design capability for absorbing up to 2 kW of lost protons in a pair of 20-Ton collimators (absorbers). This system will employ a two stage collimation with a thin molybdenum scattering foil to define the bottom edge of both the injected and decelerated-for-slipping beams. Optimization and engineering design of the collimator components and radiation shielding are based on comprehensive MARS15 simulations predicting high collimation efficiency as well as tolerable levels of prompt and residual radiation. The system installation during the Fermilab 2016 facility shutdown will permit commissioning in the subsequent operating period.

43 PARTICLE ACCELERATORS↗

A high temperature superionic phase of CsSn{sub 2}F{sub 5}

The compound CsSn{sub 2}F{sub 5} has been investigated over the temperature range from ambient to 545 K using differential scanning calorimetry, impedance spectroscopy and neutron powder diffraction methods. A first-order phase transition is observed from DSC measurements at 510(2) K, to a phase possessing a high ionic conductivity ({sigma}{approx}2.5x10{sup -2} {Omega}{sup -1} cm{sup -1} at 520 K). The crystal structure of the high temperature superionic phase (labelled {alpha}) has been determined to be tetragonal (space group I4/mmm, a=4.2606(10) A, c=19.739(5) A and Z=2) in which the cations form layers perpendicular to the [001] direction, with a stacking sequence CsSnSnCsSnSn... All the anions are located in two partially occupied sites in the gap between the Cs and Sn layers, whilst the space between the Sn cations is empty, due to the orientation of the lone-pair electrons associated with the Sn{sup 2+}. The structure of {alpha}-CsSn{sub 2}F{sub 5} is discussed in relation to two other layered F{sup -} conducting superionic phases containing Sn{sup 2+} cations, {alpha}-RbSn{sub 2}F{sub 5} and {alpha}-PbSnF{sub 4} and, to facilitate this comparison, an improved structural characterisation of the former is also presented. The wider issue of the role of lone-pair cations such as Sn{sup 2+} in promoting dynamic disorder within an anion substructure is also briefly addressed. - Graphical abstract: CsSn{sub 2}F{sub 5} is shown to undergo a first order phase transition at 510(2) K to a superionic phase in which the specific electronic configuration of the Sn{sup 2+} plays a key role in promoting extensive disorder of the anions.

36 MATERIALS SCIENCE↗

Guests inducing p-sulfonatocalix[4]arenes into nanocapsule and layer structure

Reaction of sodium p-sulfonatocalix[4]arene and TbCl{sub 3} in the presence of 2,2'-bipyridine-N,N'-dioxide (bpdo) gives the 2:1 supramolecular nanocapsule [[Tb(bpdo){sub 2}.4H{sub 2}O]{sup 3+} intersection {l_brace}p-sulfonatocalix[4]arene{sup 4-{r_brace}}{sub 2}], which further interacts with the [Tb(bpdo){sub 4}]{sup 3+} through charge-assisted {pi}-stacking interactions forming a channel structure 1. In further investigation, we tried to use the terpyridine-1,1',1'-trisoxide (tpto) instead of bpdo. Although we failed to isolate a supramolecular capsules based on the tpto, lanthanide and p-sulfonatocalix[4]arene, a layer structure derived from p-sulfonatocalix[4]arene with an unusual [Cu(tpto){sub 2}]{sup 2+} incorporation into the cavity of the calixarene and an outside [Cu(tpto){sub 2}]{sup 2+} balancing the charge, has been obtained. Fluorescence spectra show clearly that compound 1 possesses the luminescence characteristics of Tb{sup 3+} and the ligand bpdo can sensitize Tb{sup 3+} ion. Gas sorption experiment shows the channel structure 1 has highly selective gas sorption properties for water and methanol. - Graphical abstract: In the presence of different guests, a nanochannel architecture based on the p-sulfonato[4]calixarene capsule and a layered structure based on the p-sulfonato[4]calixarene tecton have been synthesized, and the luminescence properties and guest sorption of porous structure have been investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Laboratory-Scale Coal-Derived Graphene Process (Final Report)

The Energy & Environmental Research Center (EERC) conducted a laboratory-scale coal-derived graphene (CDG) project focused on developing a technological process for making graphene from four U.S. domestic coal or coal wastes, including lignite from North Dakota, subbituminous coal from Wyoming, bituminous coal from Utah, and anthracite from Pennsylvania. The project was divided into two performance or budget periods (BPs), with BP1 comprising the up-front laboratory experiments to make graphene materials from coal beginning on May 1, 2020, to April 30, 2022. BP2 was conducted from May 1, 2022, to April 30, 2023, and was focused on analyzing the CDG process economic feasibility and the technical gaps for technological scale-up and commercialization. During this project, a few different coal-derived high-value products have been demonstrated, including graphite, graphene oxide (GO), reduced graphene oxide (rGO), and graphene quantum dots (GQDs). A new graphite microstructure was discovered and named “croissant graphite” because of the exterior morphological and textural resemblance to croissant food items sold in commercial groceries stores. The new graphite structure and the associated preparation from coal or coal waste feedstocks has been the subject of a U.S. patent application. The systematic experimental processes involving coal cleaning, upgrading, and conversion to high-value carbon products culminated into a developed upgraded coal-to-products (UCP) technology that is being pursued for potential fast-track commercialization, if funding is available. It is envisioned that commercialization of the UCP technology would increase consumption of U.S. domestic coals or coal wastes to make environmentally sustainable high-value products for the electronics industry, high-energy-storage applications, and clean energy technologies such as electric vehicle (EV) lithium-ion batteries (LIBs), for which graphite has become a critical mineral commodity. Croissant graphite microstructures, when observed by field emission scanning electron microscopy (FESEM), display wavy surface morphology and often grow from a base that is made of graphitized particles with honeycomb-like layers, which are believed to be graphene layers. While more studies are needed to fully ascertain the mechanisms of the croissant graphite microstructure formation, it is postulated that their growth may begin from curling of the graphene sheets into ribbon-like structures, and continuous growth and densification of the ribbon-like structures forms croissant microstructures. Additional studies are ongoing to evaluate the electrochemical performance of croissant graphite for LIB applications and to determine the experimental conditions necessary to tune on/off croissant formation so that it can be either optimized or suppressed depending on performance evaluation results. In addition to the discovery of croissant graphite, the graphitization process from the four coal ranks in general was successful. X-ray diffraction (XRD) analysis showed that the degree of graphitization (DoG) ranged from 12% to 80% in an early sample set, and further optimization on lignite coal produces a DoG of about 92%, which was spectacular to see as lignite is the lowest-rank coal. Thus, it is expected that the graphitization performance for higher-rank coals will be similar or better when optimized as well. The coal-derived graphite was used to make GO and rGO. Analytical characterization, e.g., by methods such as Raman spectroscopy, XRD, Fourier transform infrared (FTIR) spectroscopy and FESEM, showed that the sequence of converting the coal to graphite, exfoliating it to GO, and then chemically reducing the GO to rGO was successful. Although coal naturally contains aromatic compounds and some relatively small-sized condensed aromatic units, it does not contain graphene sheets. In the UCP process, the aromatic domains in the coals, particularly low-rank coals, are concentrated and condensed further into graphene sheets, which are ordered into a 3D stack during graphitization. The synthesized graphite is then unpacked by methods such as exfoliation to various graphene products. GQDs were synthesized from all four coal types, and their optical properties were demonstrated to be tunable by the coal precursor preprocessing treatments. In all four coal types, enhanced optical properties were observed for the produced GDQs with incremental improvements made to the coal precursors. GQDs produced from raw coal samples displayed lower ultraviolet–visible (UV–Vis) spectroscopy absorbance intensity compared to those obtained from cleaned and upgraded coal residues. The photoluminescence (PL) intensities also varied with pretreatment conditions and with the concentration of GQDs in aqueous solutions. GQDs obtained from anthracite show longer emission wavelengths and can be excited by visible light as opposed to GQDs derived from the other coal ranks. UV fluorescence 3D maps and spectra revealed that the emission wavelength at which the GQDs solutions display the highest intensity was slightly redshifted based on the coal precursor pretreatments. In low-rank coal (lignite and subbituminous) samples, two clusters were observed in the maps for GQDs, which may suggest that there are potentially two types of fluorophores in solution or two main size populations. The ability to tune the properties of GQDs based on processing methods can be exploited to make GQDs for various optical display or optoelectronics applications. The results also highlight the importance of removing coal-borne impurities to improve the quality of the coal precursor for preparation of graphene products. Coal and/or coal wastes preprocessing methods were developed and applied to clean and upgrade the coal precursors prior to graphitization and subsequent conversion to graphene products. The preprocessing methods involve high specific-gravity separations, mineral acid cleaning (no hydrofluoric acid), and subsequent upgrading by reducing the coal-borne heteroatom (nitrogen, sulfur, and oxygen) content using proprietary chemical agents. Analytical characterization revealed that the preprocessing steps were successful, with ash reductions that range from 38% to 80% and residual ash content that was below the 5 wt% initial target. Based on proximate and ultimate analysis, the heteroatom reduction reactions produced upgraded coal residues with the oxygen content reduced by 8% to 24%, with additional reductions in the nitrogen and sulfur contents. An initial assessment of the waste streams from the UCP process shows very small to negligible environmental impact due to CO 2 , NO x , and SO x because most process steps are performed under inert atmosphere with argon. Consequently, reactive oxygen environments that tend to create these species are avoided. The inorganic and potentially hazardous species are released into aqueous waste streams that are easy to handle for proper disposal. The liquid waste streams were found to contain low-level concentrations of rare-earth elements (REEs), which could be concentrated and recovered as value-added by-products. Additionally, the volatile and gaseous fractions from carbonization and heat treatment contain useful organic compounds that can also be recovered as potential valuable by-products. Thus, the UCP technology is considered an environmentally sustainable and promising emerging technology for making high-value products from coal and coal wastes, with potential additional value-added by-products. Analysis of potential markets for the coal-derived carbon products shows a strong demand in both niche market sectors and across a wide variety of other industrial sectors. Graphite is currently considered a critical mineral commodity that has a large and growing demand in the LIB industry for EV applications. Based on data from Fortune Business Insights (2022) and Marketwatch (2023) reports, the average global graphite market is projected to reach about 33 billion by 2028, growing at a compound annual growth rate (CAGR) of about 7%, with much of this growth expected to be in the LIB industry. GO and rGO have strong market potentials in various application areas, such as coatings for anticorrosion, anti-icing, and antimicrobial protection, thermal barriers, wear resistance, sensors, additive manufacturing such as 3D inks, and others. GQDs are the emerging key player in the bioimaging, photovoltaics, and light-emitting diodes (LEDs) applications, with the potential to replace traditional semiconductor quantum dots (SQDs), which are based on metallic systems that are more toxic and more expensive. Biomedical applications of GQDs are becoming more attractive because of low to no toxicity and extremely low cost compared to SQDs. The major challenges for scale-up and commercialization of coal-derived carbon products such as graphene vary from the inherent attributes of graphene itself to reluctance to accept graphene in new manufacturing processes because of the uncertainty of the unknown. The 2D nature of graphene materials with a thickness of one atom presents significant challenges to proper handling/processing, and process scale-up becomes difficult because it requires high-end, expensive equipment, even for routine handling and analysis for quality assurance and control. Pristine graphene can also be extremely difficult to work into other matrices, thus hindering downstream processibility, especially at large scale. Currently, the cost of graphene and graphene products is still high and presents an economic risk that tends to slow down investment in scaling up emerging technologies. The lack of a standard for graphene materials for quality assurance and quality control poses a great challenge not only for the markets but also for commercialization efforts. A first-look economic feasibility analysis of the UCP technology provided valuable information that suggests the UCP process would be feasible, especially when it is scaled to a pilot scale and could be more competitive at the full scale. Graphitization was found to be the most energy-consuming and most capital-intensive step in the overall process. In small laboratory- and bench-scale experiments, labor is a significant contributor to the total process costs. Although these energy, capital, and labor constraints contribute to a higher selling price for the product, a preliminary economic model suggests that the process would be feasible at large scale when the process is fully integrated, optimized, and automated.

01 COAL, LIGNITE, AND PEAT↗

AI-assisted detector design for the EIC (AID(2)E)

Artificial Intelligence is poised to transform the design of complex, large-scale detectors like ePIC at the future Electron Ion Collider. Featuring a central detector with additional detecting systems in the far forward and far backward regions, the ePIC experiment incorporates numerous design parameters and objectives, including performance, physics reach, and cost, constrained by mechanical and geometric limits. This project aims to develop a scalable, distributed AI-assisted detector design for the EIC (AID(2)E), employing state-of-the-art multiobjective optimization to tackle complex designs. Supported by the ePIC software stack and using G EANT 4 simulations, our approach benefits from transparent parameterization and advanced AI features. The workflow leverages the PanDA and iDDS systems, used in major experiments such as ATLAS at CERN LHC, the Rubin Observatory, and sPHENIX at RHIC, to manage the compute intensive demands of ePIC detector simulations. Tailored enhancements to the PanDA system focus on usability, scalability, automation, and monitoring. Ultimately, this project aims to establish a robust design capability, apply a distributed AI-assisted workflow to the ePIC detector, and extend its applications to the design of the second detector (Detector-2) in the EIC, as well as to calibration and alignment tasks. Additionally, we are developing advanced data science tools to efficiently navigate the complex, multidimensional trade-offs identified through this optimization process.

97 MATHEMATICS AND COMPUTING↗

[La(UO{sub 2})V{sub 2}O{sub 7}][(UO{sub 2})(VO{sub 4})] the first lanthanum uranyl-vanadate with structure built from two types of sheets based upon the uranophane anion-topology

The new lanthanum uranyl vanadate divanadate, [La(UO{sub 2})V{sub 2}O{sub 7}][(UO{sub 2})(VO{sub 4})] was obtained by reaction at 800 Degree-Sign C between lanthanum chloride, uranium oxide (U{sub 3}O{sub 8}) and vanadium oxide (V{sub 2}O{sub 5}) and the structure was determined from single-crystal X-ray diffraction data. This compound crystallizes in the orthorhombic system with space group P2{sub 1}2{sub 1}2{sub 1} and unit-cell parameters a=6.9470(2) A, b=7.0934(2) A, c=25.7464(6) A, V=1268.73(5) A{sup 3}, Z=4. A full matrix least-squares refinement yielded R{sub 1}=0.0219 for 5493 independent reflections. The crystal structure is characterized by the stacking of uranophane-type sheets {sup 2}{sub {infinity}}[(UO{sub 2})(VO{sub 4})]{sup -} and double layers {sup 2}{sub {infinity}}[La(UO{sub 2})(V{sub 2}O{sub 7})]{sup +} connected through La-O bonds involving the uranyl oxygen of the uranyl-vanadate sheets. The double layers result from the connection of two {sup 2}{sub {infinity}}[La(UO{sub 2})(VO{sub 4}){sub 2}]{sup -} sheets derived from the uranophane anion-topology by replacing half of the uranyl ions by lanthanum atoms and connected through the formation of divanadate entities. - Graphical abstract: A view of the three-dimensional structure of [La(UO{sub 2})V{sub 2}O{sub 7}][(UO{sub 2})(VO{sub 4})]. Highlights: Black-Right-Pointing-Pointer New lanthanum uranyl vanadate divanadate has been synthesized. Black-Right-Pointing-Pointer Structure was determined from single-crystal X-ray diffraction data. Black-Right-Pointing-Pointer Structure is characterized by uranophane-type sheets and double layers {sup 2}{sub {infinity}}[La(UO{sub 2})(V{sub 2}O{sub 7})]{sup +}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗

FLAMINGO: combining kinetic SZ effect and galaxy–galaxy lensing measurements to gauge the impact of feedback on large-scale structure

Energetic feedback processes associated with accreting supermassive black holes can expel gas from massive haloes and significantly alter various measures of clustering on $\sim$Mpc scales, potentially biasing the values of cosmological parameters inferred from analyses of large-scale structure (LSS) if not modelled accurately. Here, we use the state-of-the-art FLAMINGO suite of cosmological hydrodynamical simulations to gauge the impact of feedback on large-scale structure by comparing to Planck + ACT stacking measurements of the kinetic Sunyaev–Zel’dovich (kSZ) effect of SDSS BOSS galaxies. We make careful like-with-like comparisons to the observations, aided by high precision KiDS and DES galaxy–galaxy lensing measurements of the BOSS galaxies to inform the selection of the simulated galaxies. In qualitative agreement with several recent studies using dark matter only simulations corrected for baryonic effects, we find that the kSZ effect measurements prefer stronger feedback than predicted by simulations which have been calibrated to reproduce the gas fractions of low redshift X-ray-selected groups and clusters. We find that the increased feedback can help to reduce the so-called $S_8$ tension between the observed and CMB-predicted clustering on small scales as probed by cosmic shear (although at the expense of agreement with the X-ray group measurements). However, the increased feedback is only marginally effective at reducing the reported offsets between the predicted and observed clustering as probed by the thermal SZ (tSZ) effect power spectrum and tSZ effect – weak lensing cross-spectrum, both of which are sensitive to higher halo masses than cosmic shear.

79 ASTRONOMY AND ASTROPHYSICS↗

Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS{sub 2}/Mo/glass stacks and CuInS{sub 2} thin-film solar cells

Electron backscatter diffraction (EBSD) and cathodoluminescence (CL) measurements in a scanning electron microscope were performed on cross sections of CuInS{sub 2} thin films and ZnO/CdS/CuInS{sub 2}/Mo/glass thin-film solar cells. The CuInS{sub 2} layers analyzed for the present study were grown by a rapid thermal process. The regions of the CuInS{sub 2} layers emitting high CL intensity of band-band luminescence are situated near the top surface (or close to the interface with ZnO/CdS). This can be attributed to an enhanced crystal quality of the thin films in this region. The phenomenon may be related to the recrystallization via solid-state reactions with Cu{sub x}S phases, which is assumed to run from the top to the bottom of the growing CuInS{sub 2} layer. The distribution of CL intensities is independent of the sample temperature, the acceleration voltage of the electron beam, and of whether or not the ZnO/CdS window layers are present. When comparing CL images and EBSD maps on identical sample positions, pronounced intragrain CL contrast is found for individual grains. Also, it is shown that at random grain boundaries, the decreases in CL intensities are substantially larger than at {Sigma}3 grain boundaries.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and physico-chemical properties of the new quaternary oxide Sr{sub 5}BiNi{sub 2}O{sub 9.6}

A new black quaternary oxide Sr{sub 5}BiNi{sub 2}O{sub 9.6} was synthesized by solid state reaction at 1200 Degree-Sign C. Its structure was solved by electron crystallography and X-ray powder refinement, yielding a tetragonal structure with space group I4/mmm, a=5.3637 (2) A, c=17.5541(5) A, Z=4. The structure can be described as a stacking of (Bi,Sr)-O rocksalt slabs and SrNiO{sub 3-{delta}} perovskite slabs. The initial nickel valence is close to +3.1. Thermogravimetry and high-temperature oxygen coulometry showed that this compound has variable oxygen content as a function of temperature and oxygen pressure, and ultimately decomposes when heated in low oxygen pressure above 800 Degree-Sign C. It is a metallic conductor with n-type conduction. Its thermoelectric power was determined and found to be -20 and -38 {mu}V/K at 300 and 650 Degree-Sign C, respectively. Magnetic measurements confirm the nickel valence close to +3 and show evidence of magnetic ordering at 20 K. - Graphical Abstract: View of the structure of new Sr{sub 5}BiNi{sub 2}O{sub 9.6} oxide. Highlights: Black-Right-Pointing-Pointer Discovery of a new, unreported phase in the Sr-Bi-Ni-O system. Black-Right-Pointing-Pointer Full crystal structure determination by electron and X-ray diffraction. Black-Right-Pointing-Pointer Oxygen stoichiometry variation determination vs. P,T. Black-Right-Pointing-Pointer Determination of electrical and magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A DIRECT MEASUREMENT OF THE INTERGALACTIC MEDIUM OPACITY TO H I IONIZING PHOTONS

We present a new method to directly measure the opacity from H I Lyman limit (LL) absorption kappa{sub LL} along quasar sight lines by the intergalactic medium (IGM). The approach analyzes the average ('stacked') spectrum of an ensemble of quasars at a common redshift to infer the mean free path lambda{sup 912}{sub mfp} to ionizing radiation. We apply this technique to 1800 quasars at z = 3.50-4.34 drawn from the Sloan Digital Sky Survey (SDSS), giving the most precise measurements on kappa{sub LL} at any redshift. From z = 3.6 to 4.3, the opacity increases steadily as expected and is well parameterized by lambda{sup 912}{sub mfp} = lambda{sub 0} - b {sub l}ambda(z - 3.6) with lambda{sub 0} = (48.4 +- 2.1) h{sup -1}{sub 72} Mpc and b{sub l}ambda = (38.0 +- 5.3) h {sup -1}{sub 72} Mpc (proper distance). The relatively high lambda{sup 912} {sub mfp} values indicate that the incidence of systems which dominate kappa{sub LL} evolves less strongly at z > 3 than that of the Lyalpha forest. We infer a mean free path three times higher than some previous estimates, a result which has important implications for the photoionization rate derived from the emissivity of star-forming galaxies and quasars. Finally, our analysis reveals a previously unreported, systematic bias in the SDSS quasar sample related to the survey's color targeting criteria. This bias potentially affects all z approx 3 IGM studies using the SDSS database.

79 ASTRONOMY AND ASTROPHYSICS↗

Hybrid Metrology and 3D-AFM Enhancement for CD Metrology Dedicated to 28 nm Node and Below Requirements

The measurement accuracy is becoming one of the major components that have to be controlled in order to guarantee sufficient production yield. Already at the R and D level, we have to come up with the accurate measurements of sub-40 nm dense trenches and contact holes coming from 193 immersion lithography or E-Beam lithography. Current production CD (Critical Dimension) metrology techniques such as CD-SEM (CD-Scanning Electron Microscope) and OCD (Optical Critical Dimension) are limited in relative accuracy for various reasons (i.e electron proximity effect, outputs parameters correlation, stack influence, electron interaction with materials...). Therefore, time for R and D is increasing, process windows degrade and finally production yield can decrease because you cannot manufactured correctly if you are unable to measure correctly. A new high volume manufacturing (HVM) CD metrology solution has to be found in order to improve the relative accuracy of production environment otherwise current CD Metrology solution will very soon get out of steam.In this paper, we will present a potential Hybrid CD metrology solution that smartly tuned 3D-AFM (3D-Atomic Force Microscope) and CD-SEM data in order to add accuracy both in R and D and production. The final goal for 'chip makers' is to improve yield and save R and D and production costs through real-time feedback loop implement on CD metrology routines. Such solution can be implemented and extended to any kind of CD metrology solution. In a 2{sup nd} part we will discuss and present results regarding a new AFM3D probes breakthrough with the introduction of full carbon tips made will E-Beam Deposition process. The goal is to overcome the current limitations of conventional flared silicon tips which are definitely not suitable for sub-32 nm nodes production.

36 MATERIALS SCIENCE↗