Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum interference effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Absorption and emission of silicon nanocrystals embedded in SiC: Eliminating Fabry-Pérot interference

Silicon nanocrystals embedded in SiC are studied by spectrophotometry and photoluminescence (PL) spectroscopy. Absorptivities are found to be affected by residual Fabry-Pérot interference arising from measurements of reflection and transmission at locations of different film thickness. Multiple computational and experimental methods to avoid these errors in thin film measurements, in general, are discussed. Corrected absorptivity depends on the quantity of Si embedded in the SiC but is independent of the Si crystallinity, indicating a relaxation of the k-conservation criterion for optical transitions in the nanocrystals. Tauc gaps of 1.8–2.0 and 2.12 eV are determined for Si nanoclusters and SiC, respectively. PL spectra exhibit a red-shift of ∼100 nm per nm nominal Si nanocluster diameter, which is in agreement with quantum confinement but revealed to be an artifact entirely due to Fabry-Pérot interference. Several simple experimental methods to diagnose or avoid interference in PL measurements are developed that are applicable to all thin films. Corrected PL is rather weak and invariant with passivation, indicating that non-paramagnetic defects are responsible for rapid non-radiative recombination. They are also responsible for the broad, sub-gap PL of the SiC, and can wholly account for the form of the PL of samples with Si nanoclusters. The PL intensity of samples with Si nanoclusters, however, can only be explained with an increased density of luminescent defects in the SiC due to Si nanoclusters, efficient tunneling of photogenerated carriers from Si nanoclusters to SiC defects, or with emission from a-Si nanoclusters. Films prepared on Si exhibit much weaker PL than the same films prepared on quartz substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Josephson phase diffusion in the superconducting quantum interference device ratchet

We study diffusion of the Josephson phase in the asymmetric superconducting quantum interference device (SQUID) subjected to a time-periodic current and pierced by an external magnetic flux. We analyze a relation between phase diffusion and quality of transport characterized by the dc voltage across the SQUID and efficiency of the device. In doing so, we concentrate on the previously reported regime [J. Spiechowicz and J. Łuczka, New J. Phys. 17, 023054 (2015)] for which efficiency of the SQUID attains a global maximum. For long times, the mean-square displacement of the phase is a linear function of time, meaning that diffusion is normal. Its coefficient is small indicating rather regular phase evolution. However, it can be magnified several times by tailoring experimentally accessible parameters like amplitudes of the ac current or external magnetic flux. Finally, we prove that in the deterministic limit this regime is essentially non-chaotic and possesses an unexpected simplicity of attractors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

J eff = $\frac{3}{2}$ metallic phase and unconventional superconductivity in GaTa 4 Se 8

By means of density functional theory plus dynamical mean-field theory (DFT+DMFT) calculations and resonant inelastic x-ray scattering (RIXS) experiments, we investigate the high-pressure phases of the spin-orbit-coupled Jeff = 3/2 insulator GaTa 4 Se 8 . Its metallic phase, derived from the Mott state by applying pressure, is found to carry J eff = 3/2 moments. The characteristic excitation peak in the RIXS spectrum maintains its destructive quantum interference of J eff at the Ta L2-edge up to 10.4 GPa. Our exact diagonalization based DFT+DMFT calculations including spin-orbit coupling also reveal that the J eff = 3/2 character can be clearly identified under high pressure. These results establish the intriguing nature of the correlated metallic magnetic phase, which represents the first confirmed example of J eff =3/2 moments residing in a metal. They also indicate that the pressure-induced superconductivity is likely unconventional and influenced by these J eff = 3/2 moments. Based on a self-energy analysis, we furthermore propose the possibility of doping-induced superconductivity related to a spin-freezing crossover.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simultaneous high crystallinity and sub-bandgap optical absorptance in hyperdoped black silicon using nanosecond laser annealing

Hyperdoped black silicon fabricated with femtosecond laser irradiation has attracted interest for applications in infrared photodetectors and intermediate band photovoltaics due to its sub-bandgap optical absorptance and light-trapping surface. However, hyperdoped black silicon typically has an amorphous and polyphasic polycrystalline surface that can interfere with carrier transport, electrical rectification, and intermediate band formation. Past studies have used thermal annealing to obtain high crystallinity in hyperdoped black silicon, but thermal annealing causes a deactivation of the sub-bandgap optical absorptance. In this study, nanosecond laser annealing is used to obtain high crystallinity and remove pressure-induced phases in hyperdoped black silicon while maintaining high sub-bandgap optical absorptance and a light-trapping surface morphology. Furthermore, it is shown that nanosecond laser annealing reactivates the sub-bandgap optical absorptance of hyperdoped black silicon after deactivation by thermal annealing. Thermal annealing and nanosecond laser annealing can be combined in sequence to fabricate hyperdoped black silicon that simultaneously shows high crystallinity, high above-bandgap and sub-bandgap absorptance, and a rectifying electrical homojunction. Such nanosecond laser annealing could potentially be applied to non-equilibrium material systems beyond hyperdoped black silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three dimensional metafilms with dual channel unit cells

Three-dimensional (3D) metafilms composed of periodic arrays of silicon unit cells containing single and multiple micrometer-scale vertical split ring resonators (SRRs) per unit cell were fabricated. In contrast to planar and stacked planar structures, these 3D metafilms have a thickness t ~λ d /4, allowing for classical thin film effects in the long wavelength limit. The infrared specular far-field scattering response was measured for metafilms containing one and two resonators per unit cell and compared to numerical simulations. Excellent agreement in the frequency region below the onset of diffractive scattering was obtained. For dense arrays of unit cells containing single SRRs, normally incident linearly polarized plane waves which do not excite a resonant response result in thin film interference fringes in the reflected spectra and are virtually indistinguishable from the scattering response of an undecorated array of unit cells. For the resonant linear polarization, the specular reflection for arrays is highly dependent on the SRR orientation on the vertical face for gap-up, gap-down, and gap-right orientations. For dense arrays of unit cells containing two SRRs per unit cell positioned on adjacent faces, the specular reflection spectra are slightly modified due to near-field coupling between the orthogonally oriented SRRs but otherwise exhibit reflection spectra largely representative of the corresponding single-SRR unit cell structures. Lastly, the ability to pack the unit cell with multiple inclusions which can be independently excited by choice of incident polarization suggests the construction of dual-channel films where the scattering response is selected by altering the incident polarization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoredox Catalysis with Spin Magnetic Field Effects: A Scheme for Chiral Resolution

Quantities that break both mirror symmetry and time-reversal symmetry, such as the orbital angular momentum, are known to connect molecular chirality with an applied magnetic field. This concept has led to observations such as magneto-chiral dichroism and chirality-induced spin selectivity (CISS). However, being small, these effects often require additional amplification procedures such as flow chemistry to achieve bulk enantioseparation. In this work, we demonstrate how the magnetic field effect on photogenerated radical pairs, which also breaks time-reversal symmetry, can be harnessed for enantiopurification. Fundamental to this process is the collective decay of the singlet and triplet radical-pair states made possible by an applied magnetic field. Because opposite enantiomers exhibit spin-orbit coupling matrix elements of opposite signs, the singlet and triplet decay channels interfere constructively in one enantiomer. Meanwhile, molecules of the other enantiomer are funnelled into the first enantiomer through excited-state chirality inversion, achieving (dynamic kinetic) chiral resolution. Using an axially chiral binaphthyl derivative and a borane photosensitizer as prototype, we predict an appreciable enantiomeric excess (e.e.) of 90% to be possible at steady state, attained within hundreds of milliseconds when irradiated by a laser. Importantly, our analytical results showcase regimes of perfect enantioselectivity (100% e.e.), accessible by further chemical optimization of the photosensitizer for which general strategies are discussed. Altogether, this work illustrates a so-far untapped but powerful control knob for photoredox catalysis based on spin chemistry principles.

Magnetic properties↗

The influence of microstructure on magnetic properties of nanocrystalline Fe-Pt-Nb-B permanent magnet ribbons

A FePt-based hard-magnetic nanocomposite of exchange spring type was prepared by isothermal annealing of melt-spun Fe{sub 52}Pt{sub 28}Nb{sub 2}B{sub 18} (atomic percent) ribbons. The relationship between microstructure and magnetic properties was investigated by qualitative and quantitative structural analysis based on the x-ray diffraction, transmission electron microscopy, and {sup 57}Fe Moessbauer spectrometry on one hand and the superconducting quantum interference device magnetometry on the other hand. The microstructure consists of L1{sub 0}-FePt hard-magnetic grains (15-45 nm in diameter) dispersed in a soft magnetic medium composed by A1 FePt, Fe{sub 2}B, and boron-rich (FeB)PtNb remainder phase. The ribbons annealed at 700 deg. C for 1 h exhibit promising hard-magnetic properties at room temperature: M{sub r}/M{sub s}=0.69; H{sub c}=820 kA/m and (BH){sub max}=70 kJ/m{sup 3}. Strong exchange coupling between hard and soft magnetic phases was demonstrated by a smooth demagnetizing curve and positive {delta}M-peak in the Henkel plot. The magnetic properties measured from 5 to 750 K reveals that the hard characteristics remains rather stable up to 550 K, indicating a good prospect for the use of these permanent magnets in a wide temperature range.

36 MATERIALS SCIENCE↗

Explosion Source Models and the Scattering Origin of Regional Phases from SPE Phase 1 Coda Spectral Ratios

The Source Physics Experiment(SPE)explosions provide comprehensive ground truth information,and nearby recordings that are rarely available in typical monitoring scenarios. Here, we look for relationships with local and regional distance data to understand source and propagation effects in an effort to improve monitoring at a distance. We examine source spectral ratios, which can be measured to high precision by taking advantage of many SPE and independently operated stations, as well as the redundancy available from coda waves. Classical source models (Mueller and Murphy, 1971, MM71; Denny and Johnson, 1991, DJ91)predict the source ratios poorly; however, a hybrid model(MM71 with DJ91 cavity radii)performs better, and by varying cavity and elastic radii we obtain models that fit to within measurement precision. Based on this, the best prediction model for the SPE suite is the hybrid model with cavity radius decreased by 95%, and elastic radius decreased by 75%. This works best for mid-range scaled depths of burial (SPE-1, 2, 3, and 5). We do not guarantee transportability to other geologies,depth and scaled depth ranges. Finally, we observe a distinct spectral modulation at 6-9Hzthat is not predicted by classical models, and is most likely the result of interference of short period surface waves(Rg)with those produced by spallation of near surface layers.The same modulationis observed for compressional (P) and shear(S) waves at distance, indicating the origin of these waves as scattered Rg.The scattering process must be accounted for quantitatively when using distant signals to monitor treaty compliance over broad regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical second harmonic generation in anisotropic multilayers with complete multireflection of linear and nonlinear waves using ♯SHAARP.ml package

Abstract Optical second harmonic generation (SHG) is a nonlinear optical effect widely used for nonlinear optical microscopy and laser frequency conversion. Closed-form analytical solution of the nonlinear optical responses is essential for evaluating materials whose optical properties are unknown a priori. A recent open-source code, ♯SHAARP. si , can provide such closed form solutions for crystals with arbitrary symmetries, orientations, and anisotropic properties at a single interface. However, optical components are often in the form of slabs, thin films on substrates, and multilayer heterostructures with multiple reflections of both the fundamental and up to ten different SHG waves at each interface, adding significant complexity. Many approximations have therefore been employed in the existing analytical approaches, such as slowly varying approximation, weak reflection of the nonlinear polarization, transparent medium, high crystallographic symmetry, Kleinman symmetry, easy crystal orientation along a high-symmetry direction, phase matching conditions and negligible interference among nonlinear waves, which may lead to large errors in the reported material properties. To avoid these approximations, we have developed an open-source package named Second Harmonic Analysis of Anisotropic Rotational Polarimetry in Multilayers (♯SHAARP. ml ). The reliability and accuracy are established by experimentally benchmarking with both the SHG polarimetry and Maker fringes using standard and commonly used nonlinear optical materials as well as twisted 2-dimensional heterostructures.

36 MATERIALS SCIENCE↗

Arbitrary-ratio power splitter based on nonlinear multimode interference coupler

We propose an ultra-compact multimode interference (MMI) power splitter based on nonlinear effects from simulations using nonlinear modal propagation analysis (NMPA) cooperation with finite difference Method (FDM) to access free choice of splitting ratio. Conventional multimode interference power splitter could only obtain a few discrete ratios. The power splitting ratio may be adjusted continuously while the input set power is varying by a tunable laser. In fact, using an ultra- compact MMI with a simple structure that is launched by a tunable nonlinear input fulfills the problem of arbitrary-ratio in integrated photonics circuits. Silicon on insulator (SOI) is used as the offered material due to the high contrast refractive index and Centro symmetric properties. The high-resolution images at the end of the multimode waveguide in the simulated power splitter have a high power balance, whereas access to a free choice of splitting ratio is not possible under the linear regime in the proposed length range except changes in the dimension for any ratio. The compact dimensions and ideal performance of the device are established according to optimized parameters. The proposed regime can be extended to the design of M×N arbitrary power splitters ratio for programmable logic devices in all optical digital signal processing. The results of this study indicate that nonlinear modal propagation analysis solves the miniaturization problem for all-optical devices based on MMI couplers to achieve multiple functions in a compact planar integrated circuit and also overcomes the limitations of previously proposed methods for nonlinear MMI.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the Ds+ to K+K-e+ nu Decay Channel with the BaBar Experiment

Charm semileptonic decays allow a validation of lattice QCD calculations through the measurement of the hadronic form factors, which characterize the effect of strong interaction in these reactions. The accuracy of such calculations is crucial for the improvement of the test of the standard model in flavor physics. This thesis presents a study of the D s + → K + K - e + v e channel using 214 fb -1 recorded by de BAbar experiment. For events with a K + K - mass in the range between 1.01 GeV/c 2 and 1.03 Gev/c 2 , the Φ → K + K - is the dominant component. Using the simple pole model to parameterize the q 2 dependence of the form factors -V(q 2 ), A 1 (q 2 ) and A 2 (q 2 )- the following ratios are measured at q 2 = 0; τ V = V(0)/A 1 (0) = 1.868 ± 0.061 ± 0.079, r 2 = A 2 (0)/A 1 (0) = 0.763 ± 0.072 ± 0.062. The mass pole of the axial-vector form factor is also obtained: m A = (2.30 -0.18 +0.42 ± 0.21) GeV/c 2 . In the same mass range, the semileptonic branching fraction, relative to the D s + → Φπ + channel, is measured, and the absolute normalization of the axial-vector form factor is extracted: A 1 (q 2 = 0) and = 0.605 ± 0.012 ± 0.018 ± 0.018. The stated errors refer to the statistical, systematic and errors from external inputs, respectively. An S wave component in the K + K - system, possibly originating from a f 0 , is also studied through its interference with the Φ. An S wave component is observed for the first time in this decay channel with a 5σ significance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Peculiarities of electromagnetic field distribution in a finite one-dimensional photonic crystal at oblique incidence of radiation

The effect of increasing an electric field E is investigated for oblique incidence of radiation on a finite one-dimensional photonic crystal. The peculiarities in the field distribution in the structure E(x) are found to be due to the interference of counterpropagating Bloch waves; therefore, the conditions for increasing the field to a maximum value |E|{sub max} coincide with those for achieving the maximum band gap E{sub g} of an infinite crystal. It is shown that a significant (several times for structures with 30 periods) growth of |E|{sub max} is observed with increasing angle of incidence θ for wavelengths λ, which correspond to transmission maxima T nearest to the band gap boundaries. The increased interference of the counterpropagating Bloch modes is caused by an enhancement of the x-component contrast (perpendicular to the planes of the layers) of the wave numbers k{sub 1x}/k{sub 2x} in the structure layers. Along with this, there also arise characteristic features in the distribution of E(x) associated with the vanishing of the forbidden band width. In this case, the field distribution in all periods is the same. Two types of such features are observed in the case of oblique incidence. The former takes place for p-polarisation at an angle of incidence θ, which is an analogue of the Brewster angle. The latter corresponds to the situation when the length of each structure layer is equal to an integer of half-waves. This occurs simultaneously for s- and p-polarisations and is observed in a limited range of layer widths only for the second and highest forbidden bands. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-time catheter tracking for high-dose-rate prostate brachytherapy using an electromagnetic 3D-guidance device: A preliminary performance study

Purpose: In order to increase the accuracy and speed of catheter reconstruction in a high-dose-rate (HDR) prostate implant procedure, an automatic tracking system has been developed using an electromagnetic (EM) device (trakSTAR, Ascension Technology, VT). The performance of the system, including the accuracy and noise level with various tracking parameters and conditions, were investigated. Methods: A direct current (dc) EM transmitter (midrange model) and a sensor with diameter of 1.3 mm (Model 130) were used in the trakSTAR system for tracking catheter position during HDR prostate brachytherapy. Localization accuracy was assessed under both static and dynamic analyses conditions. For the static analysis, a calibration phantom was used to investigate error dependency on operating room (OR) table height (bottom vs midposition vs top), sensor position (distal tip of catheter vs connector end of catheter), direction [left-right (LR) vs anterior-posterior (AP) vs superior-inferior (SI)], sampling frequency (40 vs 80 vs 120 Hz), and interference from OR equipment (present vs absent). The mean and standard deviation of the localization offset in each direction and the corresponding error vectors were calculated. For dynamic analysis, the paths of five straight catheters were tracked to study the effects of directions, sampling frequency, and interference of EM field. Statistical analysis was conducted to compare the results in different configurations. Results: When interference was present in the static analysis, the error vectors were significantly higher at the top table position (3.3 {+-} 1.3 vs 1.8 {+-} 0.9 mm at bottom and 1.7 {+-} 1.0 mm at middle, p < 0.001), at catheter end position (3.1 {+-} 1.1 vs 1.4 {+-} 0.7 mm at the tip position, p < 0.001), and at 40 Hz sampling frequency (2.6 {+-} 1.1 vs 2.4 {+-} 1.5 mm at 80 Hz and 1.8 {+-} 1.1 at 160 Hz, p < 0.001). So did the mean offset errors in the LR direction (-1.7 {+-} 1.4 vs 0.4 {+-} 0.5 mm in AP and 0.8 {+-} 0.8 mm in SI directions, p < 0.001). The error vectors were significantly higher with surrounding interference (2.2 {+-} 1.3 mm) vs without interference (1.0 {+-} 0.7 mm, p < 0.001). An accuracy of 1.6 {+-} 0.2 mm can be reached when using optimum configuration (160 Hz at middle table position). When interference was present in the dynamic tracking, the mean tracking errors in LR direction (1.4 {+-} 0.5 mm) was significantly higher than that in AP direction (0.3 {+-} 0.2 mm, p < 0.001). So did the mean vector errors at 40 Hz (2.1 {+-} 0.2 mm vs 1.3 {+-} 0.2 mm at 80 Hz and 0.9 {+-} 0.2 mm at 160 Hz, p < 0.05). However, when interference was absent, they were comparable in the both directions and at all sampling frequencies. An accuracy of 0.9 {+-} 0.2 mm was obtained for the dynamic tracking when using optimum configuration. Conclusions: The performance of an EM tracking system depends highly on the system configuration and surrounding environment. The accuracy of EM tracking for catheter reconstruction in a prostate HDR brachytherapy procedure can be improved by reducing interference from surrounding equipment, decreasing distance from transmitter to tracking area, and choosing appropriated sampling frequency. A calibration scheme is needed to further reduce the tracking error when the interference is high.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mitigation of Finite Bandwidth Effects in Time-Division-Multiplexed SQUID Readout of TES Arrays

Time division multiplexing (TDM) is being developed as the readout technology of the X-ray integral field unit (X-IFU), a 3,168-pixel X-ray transition-edge sensor (TES) imaging spectrometer that is part of the European Space Agency's Athena satellite mission. Recent improvements in the low X-ray event count rate performance of TDM have been driven by increases in multiplexer bandwidth and the mitigation of settling transients. These methods and design changes have improved the 32-row multiplexed resolution of a NASA LPA 2.5a array from an initial (2.73 ± 0.03) eV to (1.97 ± 0.01) eV resolution at 5.9 keV. We discuss these recent advances in TDM readout, which have been implemented in an 8-column × 32-row spectrometer that will be deployed at the Lawrence Livermore National Laboratory electron beam ion trap (EBIT) facility, and present a model that will inform the design of future systems.

Transition-edge sensors↗

Impurity-limited resistance and phase interference of localized impurities under quasi-one dimensional nano-structures

The impurity-limited resistance and the effect of the phase interference among localized multiple impurities in the quasi-one dimensional (quasi-1D) nanowire structures are systematically investigated under the framework of the scattering theory. We derive theoretical expressions of the impurity-limited resistance in the nanowire under the linear response regime from the Landauer formula and from the Boltzmann transport equation (BTE) with the relaxation time approximation. We show that the formula from the BTE exactly coincides with that from the Landauer approach with the weak-scattering limit when the energy spectrum of the in-coming electrons from the reservoirs is narrow and, thus, point out a possibility that the distinction of the impurity-limited resistances derived from the Landauer formula and that of the BTE could be made clear. The derived formulas are applied to the quasi-1D nanowires doped with multiple localized impurities with short-range scattering potential and the validity of various approximations on the resistance are discussed. It is shown that impurity scattering becomes so strong under the nanowire structures that the weak-scattering limit breaks down in most cases. Thus, both phase interference and phase randomization simultaneously play a crucial role in determining the impurity-limited resistance even under the fully coherent framework. When the impurity separation along the wire axis direction is small, the constructive phase interference dominates and the resistance is much greater than the average resistance. As the separation becomes larger, however, it approaches the series resistance of the single-impurity resistance due to the phase randomization. Furthermore, under the uniform configuration of impurities, the space-average resistance of multiple impurities at room temperature is very close to the series resistance of the single-impurity resistance, and thus, each impurity could be regarded as an independent scattering center. The physical origin of this “self-averaging” under the fully coherent environments is attributed to the broadness of the energy spectrum of the in-coming electrons from the reservoirs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multispace quantum interference in a {sup 57}Fe synchrotron Moessbauer source

A physical picture for coherent emission of {gamma} rays by a nuclear array excited with synchrotron radiation is given. The particular case of a pure nuclear Bragg reflection from the {sup 57}FeBO{sub 3} crystal is analyzed. During free de-excitation of the nuclei, a nuclear exciton polariton is developing inside the crystal and generates at the exit of the crystal a coherent {gamma}-ray beam. In the crystal the nuclear levels of {sup 57}Fe are split because of a combined magnetic and electric interaction. The rich picture of {gamma}-ray interference is described, which involves geometrical space, energy, and spin domains. In the vicinity of the Neel temperature of the crystal the magnetic splitting of nuclear levels nearly collapses. These conditions lead to drastic changes in the angular, energy, and temporal properties of the emitted radiation. The emission angular function, which in the approximation of a plane incident wave represents the emission intensity for different angular settings of the crystal near Bragg angle, strongly broadens and transforms to a double-hump structure with a central dip between the peaks. The energy and temporal distributions of the emitted radiation crucially depend upon the crystal angular setting. Beyond the central dip, the energy distribution of nuclear scattering acquires a complicated form with several satellites at various energies. In contrast, at the exact angular position of the central dip, the energy spectrum exhibits a single line shape with the line width close to the natural width of the nuclear resonance. The obtained results constitute the theoretical basis for the understanding and for the further elaboration of the {sup 57}Fe synchrotron Moessbauer source--the device that provides a collimated beam of intense and polarized {gamma} radiation in an energy bandwidth of nanoelectronvolts, the nuclear resonance natural level width.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum and classical resonant escapes of a strongly driven Josephson junction

The properties of phase escape in a dc superconducting quantum interference device (SQUID) at 25 mK, which is well below quantum-to-classical crossover temperature T{sub cr}, in the presence of strong resonant ac driving have been investigated. The SQUID contains two Nb/Al-AlO{sub x}/Nb tunnel junctions with Josephson inductance much larger than the loop inductance so it can be viewed as a single junction having adjustable critical current. We find that with increasing microwave power W and at certain frequencies nu and nu/2, the single primary peak in the switching current distribution, which is the result of macroscopic quantum tunneling of the phase across the junction, first shifts toward lower bias current I and then a resonant peak develops. These results are explained by quantum resonant phase escape involving single and two photons with microwave-suppressed potential barrier. As W further increases, the primary peak gradually disappears and the resonant peak grows into a single one while shifting further to lower I. At certain W, a second resonant peak appears, which can locate at very low I depending on the value of nu. Analysis based on the classical equation of motion shows that such resonant peak can arise from the resonant escape of the phase particle with extremely large oscillation amplitude resulting from bifurcation of the nonlinear system. Our experimental result and theoretical analysis demonstrate that at T<<T{sub cr}, escape of the phase particle could be dominated by classical process, such as dynamical bifurcation of nonlinear systems under strong ac driving.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗