Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Impacts of advanced diesel combustion operation on soot nanostructure and reactivity

Advanced diesel combustion, accomplished via a single pulse fuel injection and high levels of exhaust gas recirculation, is shown to be a path to reduce oxides of nitrogen and particulate matter simultaneously. This is well established in the literature. Less established is how well such dilute combustion processes influence soot formation and affect soot that is emitted from diesel engines under such combustion modes. This work focuses on characterization of the nanostructure and oxidative reactivity of soot generated by a light-duty turbodiesel engine operating under a dilute, low-temperature combustion process referred to as high-efficiency clean combustion. The high-efficiency clean combustion soot samples are shown to have a fullerenic nanostructure, characterized by high levels of tortuosity of the fringe layers as seen in transmission electron micrograph images and as quantified using an image processing algorithm. Thermogravimetric analysis of the high-efficiency clean combustion soot samples shows that they have higher rates of oxidation than soot samples from a conventional diesel combustion mode. The linkage between the nanostructure of the high-efficiency clean combustion soot samples and their oxidative reactivity reinforces and supports the structure–property relationship for soot that greater curvature on the soot nanostructure leads to significant increases in oxidative reactivity.

Yehliu, Kuen↗

Interfacial Reactivity of Radionuclides: Emerging Paradigms from Molecular Level Observations

Over the past few decades use of an increasing array of molecular-level analytical probes has provided new detailed insight into mineral and radionuclide interfacial reactivity in subsurface environments. This capability has not only helped change the way mineral surface reactivity is studied but also how field-scale contaminant migration problems are addressed and ultimately resolved. Here we overview examples of relatively new interfacial reactivity paradigms with implications for future research directions. Specific examples include understanding: the role of site-to-site electron conduction at mineral surfaces and through bulk mineral phases, effects of local chemical environment on the stability of intermediate species in oxidation/reduction reactions, and the importance of mechanistic reaction pathway for defining possible reaction products and thermodynamic driving force. The discussion also includes examples of how detailed molecular/microscopic characterization of field samples has changed the way complex contaminant migration problems were conceptualized and modeled.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Geophysical monitoring and reactive transport modeling of ureolytically-driven calcium carbonate precipitation

Ureolytically-driven calcium carbonate precipitation is the basis for a promising in-situ remediation method for sequestration of divalent radionuclide and trace metal ions. It has also been proposed for use in geotechnical engineering for soil strengthening applications. Monitoring the occurrence, spatial distribution, and temporal evolution of calcium carbonate precipitation in the subsurface is critical for evaluating the performance of this technology and for developing the predictive models needed for engineering application. In this study, we conducted laboratory column experiments using natural sediment and groundwater to evaluate the utility of geophysical (complex resistivity and seismic) sensing methods, dynamic synchrotron x-ray computed tomography (micro-CT), and reactive transport modeling for tracking ureolytically-driven calcium carbonate precipitation processes under site relevant conditions. Reactive transport modeling with TOUGHREACT successfully simulated the changes of the major chemical components during urea hydrolysis. Even at the relatively low level of urea hydrolysis observed in the experiments, the simulations predicted an enhanced calcium carbonate precipitation rate that was 3-4 times greater than the baseline level. Reactive transport modeling results, geophysical monitoring data and micro-CT imaging correlated well with reaction processes validated by geochemical data. In particular, increases in ionic strength of the pore fluid during urea hydrolysis predicted by geochemical modeling were successfully captured by electrical conductivity measurements and confirmed by geochemical data. The low level of urea hydrolysis and calcium carbonate precipitation suggested by the model and geochemical data was corroborated by minor changes in seismic P-wave velocity measurements and micro-CT imaging; the latter provided direct evidence of sparsely distributed calcium carbonate precipitation. Ion exchange processes promoted through NH{sub 4}{sup +} production during urea hydrolysis were incorporated in the model and captured critical changes in the major metal species. The electrical phase increases were potentially due to ion exchange processes that modified charge structure at mineral/water interfaces. Our study revealed the potential of geophysical monitoring for geochemical changes during urea hydrolysis and the advantages of combining multiple approaches to understand complex biogeochemical processes in the subsurface.

54 ENVIRONMENTAL SCIENCES↗

Isolation and characterization of IgG3 glycan-targeting antibodies with exceptional cross-reactivity for diverse viral families

Broadly reactive antibodies that target sequence-diverse antigens are of interest for vaccine design and monoclonal antibody therapeutic development because they can protect against multiple strains of a virus and provide a barrier to evolution of escape mutants. Using LIBRA-seq (linking B cell receptor to antigen specificity through sequencing) data for the B cell repertoire of an individual chronically infected with human immunodeficiency virus type 1 (HIV-1), we identified a lineage of IgG3 antibodies predicted to bind to HIV-1 Envelope (Env) and influenza A Hemagglutinin (HA). Two lineage members, antibodies 2526 and 546, were confirmed to bind to a large panel of diverse antigens, including several strains of HIV-1 Env, influenza HA, coronavirus (CoV) spike, hepatitis C virus (HCV) E protein, Nipah virus (NiV) F protein, and Langya virus (LayV) F protein. We found that both antibodies bind to complex glycans on the antigenic surfaces. Antibody 2526 targets the stem region of influenza HA and the N-terminal domain (NTD) region of SARS-CoV-2 spike. A crystal structure of 2526 Fab bound to mannose revealed the presence of a glycan-binding pocket on the light chain. Antibody 2526 cross-reacted with antigens from multiple pathogens and displayed no signs of autoreactivity. These features distinguish antibody 2526 from previously described glycan-reactive antibodies. Further study of this antibody class may aid in the selection and engineering of broadly reactive antibody therapeutics and can inform the development of effective vaccines with exceptional breadth of pathogen coverage.

Microbiology↗

Influence of Sedimentary Bedding on Reactive Transport Parameters under Unsaturated Conditions

Moisture and contaminant transport in partially saturated, heterogeneous, layered sediments is typically anisotropic. Solute transport parameters, including dispersivity and the adsorption coefficient, and the modeled concentration of reactive minerals may depend on the direction of flow with respect to sedimentary layering. Reaction rates, in contrast, should be independent of flow direction. We determined the influence of flow direction on transport parameters for nonreactive (Br{sup -}) and reactive (cobalt ethylenediaminetetraacetic acid [Co(II)EDTA{sup 2-}]) solutes under partially saturated conditions by imposing flow either parallel to or across sedimentary bedding in 11 intact sediment cores of various textures. Higher dispersivity of nonreactive tracers in parallel-bed cores suggested fluid channeling through permeable layers, while low-conductivity layers dampened channeling in cross-bed samples. Rates of transformation of Co(II)EDTA{sup 2-} into Co(III)EDTA{sup -} and of disassociation of Co{sup 2+} and EDTA{sup 4-} were modeled assuming that the reaction rates were independent of the flow direction. The concentration of Mn oxides that was responsible for the transformation reaction was dependent on the flow direction, which governed the extent of contact between the solution and the solid phase. Similarly, the adsorption constants of Co(II)EDTA{sup 2-} and Co(III)EDTA{sup -} were dependent on the flow direction but were also unique for each experiment. The modeled concentration of reactive minerals was the most sensitive parameter describing the reaction and transformation of Co(II)EDTA{sup 2-}.

54 ENVIRONMENTAL SCIENCES↗

Interactions Between Ingredients in IMX-101: Reactive Chemical Processes Control Insensitive Munitions Properties

Simultaneous Thermogravimetric Modulated Beam Mass Spectrometry (STMBMS) measurements have been conducted on a new Insensitive Munitions (IM) formulation. IMX-101 is the first explosive to be fully IM qualified under new NATO STANAG guidelines for fielded munitions. The formulation uses dinitroanisole (DNAN) as a new melt cast material to replace TNT, and shows excellent IM performance when formulated with other energetic ingredients. The scope of this work is to explain this superior IM performance by investigating the reactive processes occurring in the material when subjected to a well-controlled thermal environment. The dominant reactive processes observed were a series of complex chemical interactions between the three main ingredients (DNAN, NQ, and NTO) that occurs well below the onset of the normal decomposition process of any of the individual ingredients. This process shifts the thermal response of the formulations to a much lower temperature, where the kinetically controlled reaction processes are much slower. This low temperature shift has the effect of allowing the reactions to consume the reactive solids (NQ, NTO) well before the reaction rates increase and reach thermal runaway, resulting in a relatively benign response to the external stimuli. The main findings on the interaction processes are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic and mechanistic studies of reactive intermediates in photochemical and transition metal-assisted oxidation, decarboxylation and alkyl transfer reactions

Reactive species like high-valent metal-oxo complexes and carbon and oxygen centered radicals are important intermediates in enzymatic systems, atmospheric chemistry, and industrial processes. Understanding the pathways by which these intermediates form, their relative reactivity, and their fate after reactions is of the utmost importance. Herein are described the mechanistic detail for the generation of several reactive intermediates, synthesis of precursors, characterization of precursors, and methods to direct the chemistry to more desirable outcomes yielding ‘greener’ sources of commodity chemicals and fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiocarbon as a Reactive Tracer for Tracking Permanent CO 2 Storage in Basaltic Rocks

In view of concerns about the long-term integrity and containment of CO 2 storage in geologic reservoirs, many efforts have been made to improve the monitoring, verification and accounting methods for geologically stored CO 2 . Our project aimed to demonstrate that carbon-14 ( 14 C) could be used as a reactive tracer to monitor geochemical reactions and evaluate the extent of mineral trapping of CO 2 in basaltic rocks. The capacity of a storage reservoir for mineral trapping of CO 2 is largely a function of host rock composition. Mineral carbonation involves combining CO 2 with divalent cations including Ca 2+ , Mg 2+ and Fe 2+ . The most abundant geological sources for these cations are basaltic rocks. Based on initial storage capacity estimates, we know that basalts have the necessary capacity to store million to billion tons of CO 2 via in situ mineral carbonation. However, little is known about CO2-fluid-rock reactions occurring in a basaltic storage reservoir during and post-CO 2 injection. None of the common monitoring and verification techniques have been able to provide a surveying tool for mineral trapping. The most direct method for quantitative monitoring and accounting involves the tagging of the injected CO 2 with 14C because 14C is not present in deep geologic reservoirs prior to injection. Accordingly, we conducted two CO 2 injection tests at the CarbFix pilot injection site in Iceland to study the feasibility of 14C as a reactive tracer for monitoring CO 2 -fluid-rock reactions and CO 2 mineralization. Our newly developed monitoring techniques, using 14C as a reactive tracer, have been successfully demonstrated. For the first time, permanent and safe disposal of CO 2 as environmentally benign carbonate minerals in basaltic rocks could be shown. Over 95% of the injected CO 2 at the CarbFix pilot injection site was mineralized to carbonate minerals in less than two years after injection. Our monitoring results confirm that CO 2 mineralization in basaltic rocks is far faster than previously postulated.

01 COAL, LIGNITE, AND PEAT↗

Reactivity of iron-rich phyllosilicates with uranium and chromium through redox transition zones

This project performed thermodynamic, kinetic, and mineral structural studies on the reactivity of phyllosilicate Fe(II/III) with metal-reducing bacteria, and with two important poly-valent DOE contaminants (chromium and uranium) that show high mobility in their oxidized state. We focused on Fe-bearing phyllosilicates because these are important components of the reactive, fines fraction of Hanford, Oak Ridge, and Idaho National Laboratory sediments. Iron-bearing phyllosilicates strongly influence the redox state and mobility of Cr and U because of their limited hydraulic conductivity, high specific surface area, and redox reactivity. This was a collaborative project between Penn State (W.D. Burgos – PI), Miami University (H. Dong – Co-PI), and Argonne National Laboratory (K. Kemner and M. Boyanov – Co-PIs). Penn State and Miami University were funded together but separately from ANL. This report summarizes research findings and publications produced by Penn State and Miami University.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In Situ Imaging of Particle Formation and Dynamics in Reactive Material Deflagrations

Reactive composites utilizing nanoparticles have been the topic of extensive research in the past two decades. The driver for this is that, as the particle size is decreased, the mixing scale between constituents is greatly reduced, which has long thought to increase the rate of chemical reaction. While a general trend of increased reactivity has been seen for metal / metal oxide, or thermite, reactive materials, some results have demonstrated diminishing returns as the particle size is further decreased. Recent results have shown that nanoparticles, which are typically aggregates of several primary particles, can undergo very rapid coalescence to form micron particles once a critical temperature is reached. Experiments on this topic to date have been performed on very small sample masses, and sometimes under vacuum; conditions which are not representative of the environment during a deflagration. In this feasibility study, a custom burn tube was used to ignite and react 100 mg powdered thermite samples in long acrylic tubes. X-ray imaging at APS Sector 32 was performed to image the particle field as a function of distance and time as the rarefied particle cloud expanded and flowed down the tube. Five different thermite formulations were investigated, Al / CuO, Al / Fe 2 O 3 , Al / SnO 2 , Al / WO 3 , and Al / Fe 2 O 3 , along with Al / CuO formulations with different sizes of Al particles ranging from 80 nm to approximate 10 μm. The results clearly show that the sample powder reacts and unloads into a distribution of larger micron-scale particles (~5-500 μm), which continue to react and propagate as the particle-laden stream flows down the tube. This was the first direct imaging of the particle field during a thermite deflagration, and gives significant insight into the evolution of reactants to products. Analysis of phase is currently being pursued to determine whether this method can be used to extract reaction kinetics.

36 MATERIALS SCIENCE↗

Coarse-Grained Reactive Molecular Dynamics Simulations of Heterogeneities in Shocked Energetic Materials (LDRD Final Report)

This report summarizes the result of LDRD project 16-0161, titled "Coarse-Grained Re- active Molecular Dynamics Simulations of Heterogeneities in Shocked Energetic Materials." The purpose of the project was to develop a coarse-grained reactive molecular dynamics capability in LAMMPS enabling simulations of initiation in energetic materials comparable in accuracy to what is currently possible using large-scale reactive molecular dynamics, but with greatly reduced computational cost. The starting point for this work was the reactive dissipative particle dynamics (DPD) approach, which has been implemented as the new USER-DPD package in LAMMPS by researchers at Army Research Laboratory. Using modified versions of the examples provided with the new package, we examined the computational efficiency of the method, as well as its ability to model energy release in energetic materials. We observed that the Shardlow splitting method provides a great speed and accuracy advantage over conventional velocity Verlet time integration. We observed that the generic model of an energetic material provided with the USER-DPD package exhibited incomplete reaction under constant volume conditions. This was caused by quenching of the internal temperature of the molecules due to a rapid build-up of repulsive interactions between product gas components under constant volume conditions. Under constant pressure conditions, complete reaction was observed, as volume expansion prevented the buildup of strong repulsive interactions. Finally, a more realistic model calibrated to reproduce the equation of state of the RDX molecular crystal was examined. This model exhibited much less quenching of the internal temperature under constant volume conditions and reacted very rapidly under constant pressure conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗

(U) A Linear Response Model Predicts Reactivity From a Density Profile

We tested the ability to predict the system reactivity, described by alpha, given a density profile using a simple linear system response. We generated a suite of 1-dimensional density profiles that consisted of nominal density, a discontinuity, and a decay. These profiles were prescribed a functional form and the mass was conserved in all cases. From these density profiles, we calculated the alpha value of the 3-dimensional system.We calculated a linear response function given a training set of the 1-dimensional density profiles, and the system reactivity described by alpha. We tested the robustness of the response function using the remaining test data. Our results showed very good agreement between the predicted and calculated test values, where the distribution of alpha differences was centered about zero and had a standard deviation of 0.005 gens/shake. The predicted and calculated alpha values did not significantly differ (t=-0.0009 p<0.99). We used Singular Value Decomposition (SVD) to reduce the matrix rank by retaining95% of the cumulative singular value contributions. This reduced the matrix rank by 91.7%. We generated the linear response matrix and calculated the difference between the predicted and calculated alpha values. Using the reduced order matrix, we showed good agreement between the predicted and calculated alpha values where the distribution of differences was centered near zero, the standard deviation was 0.006 gens/shake, and the statistical t-test showed good agreement (t=0.02, p<0.98). These results show a linear relationship between a series of 1-dimensional density profiles,where the mass was conserved, and the system reactivity. The next steps of this work will be to investigate the linear response using 2-dimensional density profiles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FY2020 Annual Report on Subcontract B631779 with UC Berkeley: Reactive Precursors Additive Manufacturing Report

This work succeeded in reaching each of the stated milestones for developing, printing, reacting, and characterizing the uranium carbide final products. Leveraging experience gained from creating magnesium oxide inks (milestone #1) and prior reactive precursor work with boron carbide (milestone #2) a uranium carbide reactive precursor ink was developed. The chosen composition of ink utilized a mixture of wax, petrolatum, and stearic acid as the binder. The reactive precursor portion of the ink was comprised of uranium oxide and nano particle activated carbon for production of uranium carbide via carbothermal reduction. Following an in-air burnout of the binder at 160C the printed samples were reacted and sintered at 1750C in an argon environment induction furnace. The resulting product has an open porosity dense, foam-like internal structure with a calculated density of 89% in the solid fraction.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A Brief Overview of Reactive Transport Codes Used in CO 2 Applications

Reactive transport modelling consists of computational and numerical models that describe the coupled physical, chemical, mechanical, and biological processes interacting with each other over a broad range of spatial and temporal scales. This report reviews some of the reactive transport codes available in the literature for carbon dioxide (CO 2 ) applications and can assist the scientific community with the applicability of each code to solve a specific problem. Approaches implemented in these codes can be categorized in three groups: (i) continuum-scale, (ii) pore-scale, and (iii) hybrid-scale approaches. Theoretical foundations, numerical implementations, and application examples using the models are described. In the continuum approach, flow and transport are formulated in terms of a representative control volume of the medium and coupled with geochemical reactions. The medium is characterized by bulk parameters such as porosity, permeability, or reactive surface area. In the pore-scale approach, each point of space in the pore network is occupied by either a fluid or solid phase. The pore-scale approach requires an exact knowledge of the spatial and temporal phase distribution. In the hybrid-scale approach, media are described by multiple characteristic length-scales, with some regions using a pore-scale approach while others used a continuum approach.

01 COAL, LIGNITE, AND PEAT↗

Absolute Reactive Oxygen Species Densities in the Effluent of the COST Reference Source and Plasma-generated Atomic Oxygen Density Measurements in Liquid using TALIF

Reactive oxygen species are one of the most important species produced in a plasma. In particular the role of atomic oxygen and the hydroxyl radical OH has attracted many studies ranging from plasma medicine to plasma-driven biocatalysis and water treatment. Atomic oxygen and the hydroxyl radical OH are very reactive and react unselectively with many different substrates. The quantification of atomic oxygen and OH is challenging because of their reactivity and unknown reactions and rate constants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen and Deuterium Reactivity with Carbon Surface Impurities on the TPBAR Getter Ni Plate Studied in situ with Environmental XPS

Tritium for the U.S. Department of Energy’s Tritium Readiness Program is produced in tritium-producing burnable absorber rods (TPBARs) inserted into light-water nuclear reactors. The rods are stainless-steel-clad tubes with a permeation barrier coating and internal components. The internal components have been designed and selected to produce and retain tritium. The TPBAR incorporates a Ni-plated Zircaloy-4 getter tube to capture tritium and prevent it from reaching the rod cladding and permeating into the environment. The role of the Ni coating is to protect the Zircaloy-4 getter from oxidation while allowing for maximum tritium permeability. Ubiquitous surface impurities on the Ni, such as carbon, could limit its protective functionality and permeability if they exist in relatively large concentrations. The reactivity of impurity carbon with permeating tritium can also result in tritiated hydrocarbon impurities on the gas phase. The goal of this work is to determine quantitatively the chemical state and reactivity of potential Ni coating impurities in actual TPBAR getter samples. Using Environmental X-ray Photoelectron Spectroscopy (eXPS), a very sensitive gas/surface chemistry diagnostic, we reveal in situ the source and evolution of carbon on the Ni surface at different hydrogen and deuterium pressure conditions, and how carbon reactivity may result in hydrocarbon gas-evolution at application-relevant temperatures.

36 MATERIALS SCIENCE↗

Metallic Phase-Free Zn-Al Mixed Oxide Dual Function Materials Enable High Co Selectivity in Reactive Carbon Capture From Dilute Streams

Scaling conventional carbon capture and utilization methods can be limited by cost and permitting issues associated with transportation of captured CO2. Reactive carbon capture (RCC), in which a single solid-phase dual function material (DFM) is used to both capture CO2 from dilute streams (e.g., flue gas) and catalytically convert the bound species to products in a single unit operation, has the potential to reduce energy and capital costs by over 50% relative to separate capture and conversion. To incentivize adoption, high-value products such as methanol and CO should be targeted. Appealingly, CO can be produced at atmospheric pressure, thereby lowering overall H2 demand; however, high reaction temperatures (> 600 degrees C) and the use of oxidizable transition metals, such as Ni, are often necessary to drive the reverse water-gas shift (RWGS) during reactive desorption of the bound CO2. The sensitivity of these transition metals to oxygen undercuts their utility in point source RCC. To further derisk RCC, it is essential to develop metallic-phase free DFMs that are insensitive to residual oxygen in flue gas and can achieve selective reactive desorption to CO at moderate pressures (< 400 degrees C). To this end, we have developed K-modified Zn-Al mixed oxides (K/ZnAlOx) to convert captured CO2 to CO with > 97% selectivity and yields up to 53% of captured CO2 at 400 degrees C. Complementary in situ spectroscopy studies revealed the role of K-modification in improving RCC performance of unmodified ZnAlOx. The top performing DFM was also subjected to extended RCC cycling with oxygen co-fed with CO2 during the capture test to assess durability under simulated flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity, Regioselectivity, and Synthetic Application of 2-Pyrenyl Units in Scholl Reactions

We herein report the reactivity and regioselectivity of 2-pyrenyl as a coupling unit in Scholl reactions. On the basis of the Scholl reactions of hexaarylbenzene substrates, we have found that pyrenyl units are preferably oxidized over naphthyl and phenyl units under appropriate Scholl reaction conditions, allowing divergent synthesis through a highly controllable intramolecular coupling sequence. We find that the C1 and C3 positions of the 2-pyrenyl unit are the favorable sites for intramolecular coupling while C4 is not reactive to allow further coupling. The reactivity and regioselectivity pattern can be explained by the spin density distribution, which shows that carbon–carbon bonds preferably form at sites with higher positive spin density. Guided by these findings, we successfully synthesized a double helicene and a sextuple helicene through the controlled Scholl reactions of 2-pyrenyl units.

Scholl reactions↗