Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rate formulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Flame-vortex interaction driven combustion dynamics in a backward-facing step combustor

The combustion dynamics of propane-hydrogen mixtures are investigated in an atmospheric pressure, lean, premixed backward-facing step combustor. We systematically vary the equivalence ratio, inlet temperature and fuel composition to determine the stability map of the combustor. Simultaneous pressure, velocity, heat release rate and equivalence ratio measurements and high-speed video from the experiments are used to identify and characterize several distinct operating modes. When fuel is injected far upstream from the step, the equivalence ratio entering the flame is temporally and spatially uniform, and the combustion dynamics are governed only by flame-vortex interactions. Four distinct dynamic regimes are observed depending on the operating parameters. At high but lean equivalence ratios, the flame is unstable and oscillates strongly as it is wrapped around the large unsteady wake vortex. At intermediate equivalence ratios, weakly oscillating quasi-stable flames are observed. Near the lean blowout limit, long stable flames extending from the corner of the step are formed. At atmospheric inlet temperature, the unstable mode resonates at the 1/4 wavemode of the combustor. As the inlet temperature is increased, the 5/4 wavemode of the combustor is excited at high but lean equivalence ratios, forming the high-frequency unstable flames. Higher hydrogen concentration in the fuel and higher inlet temperatures reduce the equivalence ratios at which the transitions between regimes are observed. We plot combustion dynamics maps or the response curves, that is the overall sound pressure level as a function of the equivalence ratio, for different operating conditions. We demonstrate that numerical results of strained premixed flames can be used to collapse the response curves describing the transitions among the dynamic modes onto a function of the heat release rate parameter alone, rather than a function dependent on the equivalence ratio, inlet temperature and fuel composition separately. We formulate a theory for predicting the critical values of the heat release parameter at which quasi-stable to unstable and unstable to high-frequency unstable modes take place. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Taylor flow in intermediate diameter channels: Simulation and hydrodynamic models

The two-phase Taylor flow pattern has been studied extensively. However, limited information is available for flows in intermediate diameter channels (5 ≲ Bo ≲ 40, or 6mm ≲ D ≲ 27mm for ambient gas–water flows), as found in air-lift and bubble pumps. Previous investigations have primarily evaluated Taylor flow models in terms of overall pressure drop, which incorporates hydrostatic and multiple hydrodynamic components. Thus, individual sub-models and sources of error could not be directly assessed. Here in this investigation, volume-of-fluid (VOF) based Taylor flow simulations are performed over a wide range of laminar and turbulent conditions in the intermediate Bond number regime (5 < Bo < 20, 250 < N f < 1000, and 20 < Re j < 8100). Results are applied to individually evaluate hydrodynamic sub-models for bubble-region frictional pressure drop gradient (∇p f,b ), slug frictional pressure drop gradient (∇p f,s ), and flow transition pressure loss (Δp trans ). Based on these results, recommendations are provided for selection of hydrodynamic sub-models. These hydrodynamic closure models are integrated with kinematic flow models to yield a complete intermediate Bond number Taylor flow formulation for which all submodels were independently validated. The resulting model achieves improved accuracy for predicting experimental liquid flow rates compared with previous Taylor flow models (81% of cases within 50% of measured flows rates).

42 ENGINEERING↗

Robust constrained tension control for high-precision roll-to-roll processes

Tension control is critical for maintaining good product quality in most roll-to-roll (R2R) production systems. Previous work has primarily focused on improving the disturbance rejection performance of tension controllers. Here, a robust linear parameter-varying model predictive control (LPV-MPC) scheme is designed to enhance the tension tracking performance of a pilot R2R system for deposition of materials used in flexible thin film applications. The performance of a tension controller may degrade due to disturbances associated with model uncertainties and the slowly-changing dynamics in R2R systems. We introduce a method that separately treats these two sources of disturbance. The controller utilizes an incremental model to eliminate the errors caused by the mismatch between the nominal model and the actual system. A tube-based MPC formulation combined with scheduled parameters adequately updates models and corrects for the time-varying dynamics. Constraints on the rated motor torque are incorporated in the MPC to maintain the controller reliability and avoid machine failures. We illustrate the operation of our control algorithm through simulation of an actual R2R system. The controller outperforms the benchmarks in terms of fast transient response and offset-free tension tracking. Furthermore, it also demonstrates immunity from variations due to parametric uncertainties.

42 ENGINEERING↗

Series of semi-Markov processes to model infrastructure resilience under multihazards

Civil infrastructure systems are subjected to multiple hazards, including natural and anthropogenic, that disrupt their function or the level of service offered. Estimating the function recovery of these systems (or how soon normalcy of operations will be restored) when subjected to repeated hazard events by considering the inter-event dependencies is an important problem in multihazard infrastructure resilience. However, this problem has been less addressed in the field. This paper proposes a series of semi-Markov processes model to capture the inter-event dependencies in infrastructure recovery when subjected to successive hazard events. Recovery after each new hazard event is represented by a unique semi-Markov process that models the reduced recovery rates and the increased recovery times caused by the system’s incomplete recovery from the preceding event. Two novel formulations of the inter-event dependency modeling, namely Maximal Effects Dependency (considers the worst impact of two successive hazard events) and Cumulative Effects Dependency (considers the aggregated impacts of two successive hazard events), are proposed and discussed. The model is demonstrated by considering the following applications: Three-state system subjected to deterministic and random occurrences of identical hazard events; and Multihazard resilience of a building in Charleston, SC, considering earthquake and hurricane hazards. Results indicate that considering inter-event dependencies in recovery modeling can lead to lesser-predicted resilience, thereby affecting resilience-based decision-making.

42 ENGINEERING↗

Continuum model of tensile fracture of metal melts and its application to a problem of high-current electron irradiation of metals

A continuum model of the metal melt fracture is formulated on the basis of the continuum mechanics and theory of metastable liquid. A character of temperature and strain rate dependences of the tensile strength that is predicted by the continuum model is verified, and parameters of the model are fitted with the use of the results of the molecular dynamics simulations for ultra-high strain rates (≥1–10/ns). A comparison with experimental data from literature is also presented for Al and Ni melts. Using the continuum model, the dynamic tensile strength of initially uniform melts of Al, Cu, Ni, Fe, Ti, and Pb within a wide range of strain rates (from 1–10/ms to 100/ns) and temperatures (from melting temperature up to 70–80% of critical temperature) is calculated. The model is applied to numerical investigation of a problem of the high-current electron irradiation of Al, Cu, and Fe targets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Target tracking using DMLC for volumetric modulated arc therapy: A simulation study

Purpose: Target tracking using dynamic multileaf collimator (DMLC) is a promising approach for intrafraction motion management in radiation therapy. The purpose of this work is to develop a DMLC tracking algorithm capable of delivering volumetric-modulated arc therapy (VMAT) to the targets that experience two-dimensional (2D) rigid motion in the beam's eye view. Methods: The problem of VMAT delivery to moving targets is formulated as a control problem with constraints. The relationships between gantry speed, gantry acceleration, MLC leaf-velocity, dose rate, and target motion are derived. An iterative search algorithm is developed to find numerical solutions for efficient delivery of a specific VMAT plan to the moving target using 2D DMLC tracking. The delivery of five VMAT lung plans is simulated. The planned and delivered fluence maps in the target-reference frame are calculated and compared. Results: The simulation demonstrates that the 2D tracking algorithm is capable of delivering the VMAT plan to a moving target fast and accurately without violating the machine constraints and the integrity of the treatment plan. The average delivery time is only 29 s longer than that of no-tracking delivery, 101 versus 72 s, respectively. The fluence maps are normalized to 200 MU and the average root-mean-square error between the desired and the delivered fluence is 2.1 MU, compared to 14.8 MU for no-tracking and 3.6 MU for one-dimensional tracking. Conclusions: A locally optimal MLC tracking algorithm for VMAT delivery is proposed, aiming at shortest delivery time while maintaining treatment plan invariant. The inconsequential increase of treatment time due to DMLC tracking is clinically desirable, which makes VMAT with DMLC tracking attractive in treating moving tumors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dispersive waves in a seeded MHD generator.

The equations giving the response of a slightly ionized plasma with monatomic components to sinusoidal perturbations have been formulated. Included in the model equations were the electron Hall effect, electron thermal diffusion, radiation, and electron-atom rate processes. Plasma conditions were limited to those where viscous effects, the induced magnetic field, ion slip, and atom-atom inelastic processes can be neglected. Presented are results of numerical calculations for MHD generators with a working fluid of potassium seeded argon.

Harstad, K. G.↗

Low thrust chemical propulsion for orbit transfer of large space structures

For transporting Large Space Structures (LSS) from Low Earth Orbit (LEO) to Geosynchronous Equatorial Orbit (GEO), a variety of low thrust engine cycles have been evaluated for oxygen/hydrogen and oxygen/hydrocarbon propellants. The engine cycles included conventional propellant turbine drives (gas generator, expander, and staged-combustion cycles), turboalternator/electric motor pump drive, and fuel-cell/electric motor pump drive, as well as pressure-fed engines. The thrust chamber cooling limits and the engine cycle limits were established for a range of thrust levels. The candidate engine cycles were analyzed, screened, rated, and two engine cycle/configurations were selected for preliminary engine design. Preliminary engine designs for these two engines were formulated and engine design layouts prepared and parametric engine data generated.

Shoji, J. M.↗

A study of turbulence on compression ramps with k-epsilon and Reynolds stress models

A theoretical study was conducted to determine the effects of adverse pressure gradient and compressibility in modeling turbulent compressible flows. The kinetic energy/dissipation and Reynolds stress model predictions are presented and compared with experimental data. The effects of compressibility, which include the mass averaged fluctuation term, the pressure dilatation term, and the dilatation dissipation, are important in modeling the turbulent compressible flows. The normal stresses and longitudinal strain rates also have an effect in the prediction of turbulent energy productions on the curved surfaces. A new compressible formulation of the pressure strain term, which includes the dilatation effects, in the Reynolds stress equation is presented.

Lee, J.↗

Application of a Reynolds stress turbulence model to a supersonic radiating hydrogen-air diffusion flame

A second-order differential Reynolds Stress turbulence model has been applied to the Favre-averaged Navier-Stokes equations for the study of supersonic flows with finite-rate chemistry and radiation. An assumed Beta Probability Density Function is applied to account for the chemical source terms and the radiative flux terms in the conservation equations. A seven-species, seven-reaction finite rate chemistry mechanism is used to simulate the combustion process. The tangent slab approximation is used in radiative flux formulation. A pseudo-gray gas model is used to represent the absorption-emission characteristics of the participating species. The turbulence/radiation interaction is achieved via a new formulation. The resulting formulation is validated by comparison with experimental data on reacting supersonic axisymmetric jets. Results obtained for specific conditions indicate that the effect of chemical reaction on the turbulence is significant. Also, the radiative heat transfer is enhanced by the turbulence.

Chandrasekhar, R.↗

Comparison of PDF and Moment Closure Methods in the Modeling of Turbulent Reacting Flows

In modeling turbulent reactive flows, Probability Density Function (PDF) methods have an advantage over the more traditional moment closure schemes in that the PDF formulation treats the chemical reaction source terms exactly, while moment closure methods are required to model the mean reaction rate. The common model used is the laminar chemistry approximation, where the effects of turbulence on the reaction are assumed negligible. For flows with low turbulence levels and fast chemistry, the difference between the two methods can be expected to be small. However for flows with finite rate chemistry and high turbulence levels, significant errors can be expected in the moment closure method. In this paper, the ability of the PDF method and the moment closure scheme to accurately model a turbulent reacting flow is tested. To accomplish this, both schemes were used to model a CO/H2/N2- air piloted diffusion flame near extinction. Identical thermochemistry, turbulence models, initial conditions and boundary conditions are employed to ensure a consistent comparison can be made. The results of the two methods are compared to experimental data as well as to each other. The comparison reveals that the PDF method provides good agreement with the experimental data, while the moment closure scheme incorrectly shows a broad, laminar-like flame structure.

Norris, Andrew T.↗

Geometry of thin liquid sheet flows

Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.

Chubb, Donald L.↗

Improving Land-Surface Modeling of Evapotranspiration Processes in Tropical Forests (Final Report)

Land surface models are used to represent terrestrial processes that shape global climate; examples of these processes include evaporation, plant water use, and photosynthesis. While much progress has been made to improve and refine these models, some hydrological processes are not well captured, which hinders our ability to understand land-atmosphere interactions and ultimately to predict impacts of climate change on water resources. The inadequate representation of evapotranspiration may partly explain why global climate models do not match observed precipitation patterns. Multiple factors contribute to this problem. In moist tropical regions, high humidity, leaf wetness, and cloud cover combine to suppress forest water use and possibly reduce forest growth in ways that are poorly understood. Mountainous areas pose additional difficulties, as standard modeling and measurement techniques are not readily applied in rough terrain. In this project, we aimed to improve our understanding and modeling of fluxes of water vapor and carbon dioxide to and from tropical forests. To do this, we collected a suite of data from the mountainous rainforest surrounding the Texas A&M Soltis Center in San Ramon, Costa Rica. From 2014 to 2018, a suite of variables were measured, including: in-canopy profiles of water vapor, carbon dioxide, temperature, light, and leaf wetness; transpiration, evapotranspiration, carbon flux, and soil respiration; and local weather conditions. Leaf-scale measurements were used to find photosynthesis rates and derive their parameters. Using this data set, we were able to better quantify the relationships between assimilation and transpiration and their main drivers in tropical forests. These variables were namely available light, vapor pressure deficit, and leaf wetness, but not soil moisture, which exerted no detectable control. We also showed the vertical variability in canopy microclimates and how neglecting forest layers in models may misrepresent overall fluxes. The data were then used to test and refine evapotranspiration and energy budget formulations in the Community Land Model. Fluxes and energy budget components were compared to simulated values from CLM4.5 and CLM.5. The biggest discrepancies arose from hillslope shading effects, particularly mismatches in afternoon carbon fluxes, with notable differences in transpiration rates and sap flux due to capacitance in large trees. Secondary, but still significant issues included unrealistic leaf wetness and leaf drying rates, as well as air and vegetation temperatures, both of which were likely linked to CLM’s formulations controlling wet leaf and sunlit/shaded leaf fractions. Modeling multiple layers in the canopy via the newly released CLM-ml and making adjustments to existing parameters both show promise in resolving these issues. In total, the project has produced 5 peer-reviewed articles, 24 presentations, 2 theses, 4 public outreach items, and 4 publically available datasets, to date. Additional products are expected pending the completion of an additional thesis. Data has also been shared with several collaborative networks, including PHENOCAM and SAPFLUXNET.

54 ENVIRONMENTAL SCIENCES↗

Wettability Alteration with Weak Acid-Assisted Surfactant Flood

Oil-wetness and heterogeneity are two key reasons for low oil recovery by waterflooding in carbonate reservoirs. Surfactants have been effective in altering the oil-wet matrix to a more water-wet condition and initiating spontaneous imbibition. Because it takes time for the surfactant to alter wettability, oil recovery from the tight matrix is slow and sometimes not economically feasible. Acids have the potential of dissolving minerals, which may alter wettability. In this study, the enhanced oil recovery (EOR) performance of an acid-assisted surfactant solution, a novel technique, was evaluated for low-temperature applications. A set of acids and their acetates were tested. Bulk rock-acid reaction, wettability alteration (WA) tests, and spontaneous imbibition measurements were conducted at reservoir temperature (35°C) to identify effective candidates. Coreflood tests were then performed to evaluate the selected acid-surfactant formulations. Before and after a coreflood test, the core was scanned using micro-computed tomography (CT) to investigate pore structure alteration. Bulk reaction measurements showed that weak acids, especially acetic acid (AA), have the desired low reaction rates at 35°C. WA tests showed that AA can remove the crude oil off the rock surface and alter wettability through mineral dissolution. The surfactant can reduce contact angles from 160° to 58°; adding acid into the surfactant can further reduce it to 52°. Spontaneous imbibition experiments showed the synergy between the acid and the surfactant; the AA-surfactant solution had the highest oil recovery (62.6%) among acid-surfactant formulations. The acid improves the WA efficiency by the surfactant through surface mineral dissolution and lower ζ-potential. The imbibition transports the acid-surfactant solutions into the matrix, which minimizes face dissolution. Coreflood tests show that the AA-surfactant flood can increase the oil recovery rate and recover about 8% more oil compared to the surfactant flood. Micro-CT showed that a few mineral particles were transported along the core and partially plugged pore throats, which reduced permeability and diverted flow leading to improved oil recovery. Here, the transport of the acid in reservoirs and the potential plugging issues have to be carefully evaluated in future studies.

58 GEOSCIENCES↗

Electronic Conduction through Atomic Chains, Quantum Well and Quantum Wire

Charge transport is dynamically and strongly linked with atomic structure, in nanostructures. We report our ab-initio calculations on electronic transport through atomic chains and the model calculations on electron-electron and electron-phonon scattering rates in presence of random impurity potential in a quantum well and in a quantum wire. We computed synthesis and ballistic transport through; (a) C and Si based atomic chains attached to metallic electrodes, (b) armchair (AC), zigzag (ZZ), mixed, rotated-AC and rotated-ZZ geometries of small molecules made of 2S, 6C and 4H atoms attaching to metallic electrodes, and (c) carbon atomic chain attached to graphene electrodes. Computed results show that synthesis of various atomic chains are practically possible and their transmission coefficients are nonzero for a wide energy range. The ab-initio calculations on electronic transport have been performed with the use of Landauer-type scattering formalism formulated in terms of Grben's functions in combination with ground-state DFT. The electron-electron and electron-phonon scattering rates have been calculated as function of excitation energy both at zero and finite temperatures for disordered 2D and 1D systems. Our model calculations suggest that electron scattering rates in a disordered system are mainly governed by effective dimensionality of a system, carrier concentration and dynamical screening effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ASRM propellant and igniter propellant development and process scale-up

A program of formulation and process development for ANB-3652 motor propellant was conducted to validate design concepts and screen critical propellant composition and process parameters. Design experiments resulted in the selection of a less active grade of ferric oxide to provide better burning rate control, the establishment of AP fluidization conditions that minimized the adverse effects of particle attrition, and the selection of a higher mix temperature to improve mechanical properties. It is shown that the propellant can be formulated with AP and aluminum powder from various producers. An extended duration pilot plant run demonstrated stable equipment operation and excellent reproducibility of propellant properties. A similar program of formulation and process optimization culminating in large batch scaleup was conducted for ANB-3672 igniter propellant. The results for both ANB-3652 and ANB 37672 confirmed that their processing characteristics are compatible with full-scale production.

Landers, L. C.↗

Kinetic Monte Carlo Simulations of Chemical Reactions on Surfaces

Lattice based kinetic Monte Carlo (kMC) simulations are a powerful tool for micro-kinetic modeling. The kinetic Monte Carlo technique stochastically simulates chemical reaction processes (e.g. adsorption, desorption, diffusion), where the probability of a given reaction process being selected is weighted by its rate constant. The open source software package, KMOS1, allows fast construction of kMC simulations by automatically implementing a computationally efficient kMC framework, thus allowing the researcher to focus on accurate parameterization and formulation of the kinetic model. From this, the spatiotemporal evolution (e.g. concentration, surface configuration, turnover frequencies) of crystal surfaces or bulk crystalline structures is obtained. KMOS uses the variable step-size method implementation of kMC. At each step, the VSSM updates available events, calculates the corresponding transition rates and simulation time, and selects one of the available events. The lattice based kMC technique has many potential applications within SRNL where chemical kinetics are of interest. By transitioning through time along a trajectory of configuration space, fundamental insights to a system's dominant reactions and parameters can be gained, leading to improved materials and process design. In this work, we have established capabilities for fast implementation of kMC simulations through the installation and testing of the KMOS software on SRNL high performance computing resources. The parameterization of kMC simulations is often performed from first-principles energetic calculations. For the purposes of this work, the test cases use arbitrary species and thus, have arbitrary parameterization. In order to demonstrate the use of KMOS, two primary test cases are shown. Case 1 involves simple adsorption and desorption. Case 2 involves a slightly more complex mechanism. The evolution of the surface concentration and the final surface configuration for simulation Case 2 is shown. Rate-limiting processes and rate-limiting configurations are not always known or understood, but kMC provides information pertaining to both. The capability to implement efficient micro-kinetic models using the kinetic Monte Carlo technique has been established through the testing and installation of KMOS on SRNL HPC resources.

97 MATHEMATICS AND COMPUTING↗

Numerical investigation of a fueled pre-chamber spark-ignition natural gas engine

Pre-chamber spark-ignition (PCSI) is a leading advanced ignition concept for internal combustion engines with the potential to enable diesel-like efficiency in medium-duty/heavy-duty (MD/HD) natural gas (NG) engines. By leveraging distributed ignition sources from multiple turbulent jets, the PCSI technology can deliver extremely short combustion duration in ultra-lean mixtures and significantly improve the engine thermal efficiency. However, in the automotive industry there is a lack of adequate science base and predictive simulation tools required for commercial development of PCSI engines. Here, in this study, Reynolds-Average Navier-Stokes simulations are carried out to describe the combustion process in lean-burn NG engines, focusing on the combustion modeling approach. Two combustion models, multi-zone well-stirred reactor (MZ-WSR) and G-equation, are used to simulate the combustion process in an MD NG engine equipped with a fueled-PCSI system for four operating conditions close to the lean operating limit. A skeletal chemical mechanism and a laminar flame speed tabulation are used to compute the combustion accurately. Simulation results are compared with experimental data regarding measured cylinder pressure, heat release rate, and combustion duration. By dividing the PCSI combustion process into four distinct phases, the difference between the two models’ results for each phase is analyzed in detail. The MZ-WSR model overestimates the combustion duration for early flame kernel growth in the pre-chamber due to the lack of a specific formulation to take turbulence-chemistry interaction into account. Despite the prolonged combustion duration and low pressure built-up inside the pre-chamber, the model matches the combustion rate in the main-chamber. In contrast, the G-equation model delivers good agreements for the pre-chamber combustion and turbulent jet-driven combustion processes. However, the model starts to underestimate the combustion rate in the main-chamber, especially under ultra-lean mixture conditions. Finally, improvements are needed for both models to simulate the later combustion stage that occurred in the near-wall regions.

33 ADVANCED PROPULSION SYSTEMS↗