SEARCH · Search NASA

Results for “SOUND VELOCITY - MEASUEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Shock-induced melting of [100] lithium fluoride: Sound speed and Hugoniot measurements to 230 GPa

Although [100] lithium flouride (LiF) is the most widely used optical window material in dynamic compression experiments, its high stress (>100 GPa) shock compression response, including melting, is not well understood. To address this need, we measured wave profiles in plate impact experiments to determine the Hugoniot states and longitudinal sound speeds in [100] LiF crystals shock compressed to 231 GPa. The measured peak states are fitted well by a linear shock velocity-particle velocity relation, providing an accurate determination of the LiF Hugoniot curve to significantly higher stresses than previous experiments. The longitudinal sound speeds show a near linear increase with density compression to 182 GPa. Between 182 GPa and 195 GPa, the sound speed and the longitudinal modulus decrease abruptly, due to shock-induced melting. The increasing sound speeds and moduli at higher stresses suggest that shock compressed LiF is fully liquid at 195 GPa and above, allowing determination of the Gruneisen parameter for liquid LiF. Here, the melt stress determined here differs from that predicted by current multiphase equations of state for LiF. Our results provide important insight into the high stress solid and liquid states of shock compressed LiF and point to the need for an improved multiphase equation of state at high pressures and high temperatures.

36 MATERIALS SCIENCE↗

NASA NTRS2022

GBaTSv2: a revised synthesis of the likely basal thermal state of the Greenland Ice Sheet

The basal thermal state (frozen or thawed) of the Greenland Ice Sheet is under-constrained due to few direct measurements, yet knowledge of this state is becoming increasingly important to interpret modern changes in ice flow. The first synthesis of this state relied on inferences from widespread airborne and satellite observations and numerical models, for which most of the underlying datasets have since been updated. Further, new and independent constraints on the basal thermal state have been developed from analysis of basal and englacial reflections observed by airborne radar sounding. Here we synthesize constraints on the Greenland Ice Sheet's basal thermal state from boreholes, thermomechanical ice-flow models that participated in the Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6; Coupled Model Intercomparison Project Phase 6), IceBridge BedMachine Greenland v4 bed topography, Making Earth Science Data Records for Use in Research Environments (MEaSUREs) Multi-Year Greenland Ice Sheet Velocity Mosaic v1 and multiple inferences of a thawed bed from airborne radar sounding. Most constraints can only identify where the bed is likely thawed rather than where it is frozen. This revised synthesis of the Greenland likely Basal Thermal State version 2 (GBaTSv2) indicates that 33 % of the ice sheet's bed is likely thawed, 40 % is likely frozen and the remainder (28 %) is too uncertain to specify. The spatial pattern of GBaTSv2 is broadly similar to the previous synthesis, including a scalloped frozen core and thawed outlet-glacier systems. Although the likely basal thermal state of nearly half (46 %) of the ice sheet changed designation, the assigned state changed from likely frozen to likely thawed (or vice versa) for less than 6 % of the ice sheet. This revised synthesis suggests that more of northern Greenland is likely thawed at its bed and conversely that more of southern Greenland is likely frozen, both of which influence interpretation of the ice sheet's present subglacial hydrology and models of its future evolution. The GBaTSv2 dataset, including both code that performed the analysis and the resulting datasets, is freely available at https://doi.org/10.5281/zenodo.6759384 (MacGregor, 2022).

Joseph A. MacGregor↗

NASA NTRS1987

Prediction of acoustical behavior in cavities using an indirect boundary element method

An indirect boundary element method is developed to predict sound fields in acoustical cavities. An isoparametric quadratic boundary element is utilized. The formulations of pressure, velocity and/or impedance boundary conditions are developed and incorporated into the method. The capability to include acoustic point sources within the cavity is also implemented. The method is applied to the prediction of sound fields in spherical and rectangular cavities. All three boundary condition types are verified. Cases having a point source within the cavity domain are also studied. Numerically determined cavity pressure distributions and responses are presented. The numerical results correlate well with available analytical results.

Kipp, C. R.↗

DOE OSTI2015

On fast radial propagation of parametrically excited geodesic acoustic mode

The spatial and temporal evolution of parametrically excited geodesic acoustic mode (GAM) initial pulse is investigated both analytically and numerically. Our results show that the nonlinearly excited GAM propagates at a group velocity which is, typically, much larger than that due to finite ion Larmor radius as predicted by the linear theory. The nonlinear dispersion relation of GAM driven by a finite amplitude drift wave pump is also derived, showing a nonlinear frequency increment of GAM. Further implications of these findings for interpreting experimental observations are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1998

Refraction of Sound Emitted Near Solid Boundaries from a Sheared Jet

A mathematical model is developed to describe the sound emitted from an arbitrary point within a turbulent flow near solid boundaries. A unidirectional, transversely sheared mean flow is assumed, and the cross-section of the cold jet is of arbitrary shape. The analysis begins with Lilley's formulation of aerodynamic noise and, depending upon the specific model of turbulence used, leads via Fourier analysis to an expression for the spectral density of the intensity of the far-field sound emitted from a unit volume of turbulence. The expressions require solution of a reduced Green's function of Lilley's equation as well as certain moving axis velocity correlations of the turbulence. Integration over the entire flow field is required in order to predict the sound emitted by the complete flow. Calculations are presented for sound emitted from a plugflow jet exiting a semi-infinite flat duct. Polar plots of the far-field directivity show the dependence upon frequency and source position within the duct. Certain model problems are suggested to investigate the effect of duct termination, duct geometry, and mean flow shear upon the far-field sound.

Dill, Loren H.↗

DOE OSTI2019

Kinetic Simulations of Magnetic Reconnection in Partially Ionized Plasmas

Fast magnetic reconnection occurs in nearly all natural and laboratory plasmas and rapidly releases stored magnetic energy. Although commonly studied in fully ionized plasmas, if and when fast reconnection can occur in partially ionized plasmas, such as the interstellar medium or solar chromosphere, is not well understood. Here, this Letter presents the first fully kinetic particle-in-cell simulations of partially ionized reconnection and demonstrates that fast reconnection can occur in partially ionized systems. In the simulations, the transition to fast reconnection occurs when the current sheet width thins below the ion-inertial length in contrast to previous analytic predictions. The peak reconnection rate is ≥ 0.08 when normalized to the bulk Alfvén speed (including both ion and neutral mass), consistent with previous experimental results. However, when the bulk Alfvén speed falls below the neutral sound speed, the rate becomes system size dependent. The normalized inflow velocity is ionization fraction dependent, which is shown to be a result of neutral momentum transport. A model for the inflow is developed which agrees well with the simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1973

Noise and wake structure measurements in a subsonic tip speed fan: Tabulation and plots of test data

Noise and wake structure measurements in a ducted fan were conducted. The tip speed was kept at subsonic levels. The anechoic platform used during the test is described. The following conditions are reported: (1) one third octave band analyses of the fan noise data, (2) narrow band analyses of the fan noise for selected test conditions, (3) narrow band sound power level data for all fan test conditions, and (4) velocity and air angle evaluation of blade wake data.

Magliozzi, B.↗

NASA NTRS1975

Ultrasonic displacement system

An acoustic instrument system is described as a feasible tool for remote measurement of structural velocities. The system involves measurement of the Doppler shift of ultrasonic sound as it is reflected from an oscillating plate. Measurements were performed in air with an ultrasonic frequency source of 42.5 kilohertz. The surface under investigation was a plexiglass plate oscillating sinusoidally at 10, 13, and 15 Hz. Data are presented to show that, in such a system, the measurement of the Doppler shift is dependent upon the acoustic pathlength between the sensing device and the oscillating surface, with the distance between maximum shifts being half the wavelength of the ultrasonic source.

Faulcon, N. D.↗

NASA NTRS1984

Aerodynamic sound generation induced by flow over small, cylindrical cavities

An experimental investigation has been conducted on the production of high intensity tones by small cylindrical cavities in a flat surface. The application of such a mechanism is to the acoustic coding of moving objects containing drilled holes. The sound intensity and frequency have been determined as functions of flow velocity, diameter and depth of the cavities. As a practical matter, it is possible to produce a whistle producing 106 dB at 30.5 cm distance from a cylindrical hole of 0.5 cm diameter and 1.2 cm deep with an airflow of 60 m/s past the hole.

Parthasarathy, S. P.↗

NASA NTRS1988

Computer simulation of the Farley-Buneman instability and anomalous electron heating in the auroral ionosphere

The nonlinear saturation of the Farley-Buneman instability in a collisional plasma is studied by a 2 1/2 dimensional electrostatic particle simulation which includes inelastic and elastic collisions of electrons and elastic collision of ions with neutrals. In the simulation, a uniform convection electric field is applied externally so that the relative velocity between the electrons and ions is greater than the ion sound speed and destabilizes the instability. A nonlinear frequency shift from higher to lower frequencies and diffusion of the wave spectrum in two dimensional wave number space are found. It is found that the dominant mechanism for electron heating is due to an enhanced effective electron collision frequency and hence enhanced resistive heating as suggested by Primdahl (1986) and not due to the heating of electrons by the electric field of the waves parallel to the magnetic field. For the ionospheric conditions discussed by Schlegel and St.-Maurice (1981)an anomalous heating rate of about 4 x 10 to the 7th W/cu cm is found.

Machida, S.↗

NASA NTRS1994

Asteroseismology: Theory and phenomenology

Seismic studies of the Sun have succeeded in mapping the variation of sound speed with depth in the Sun, and variation of angular velocity with both depth and latitude. Many stars besides the Sun may also be amenable to asteroseismic analysis. Stars of roughly solar type should of course behave in ways similar to the sun, and stars of this sort form a large fraction of the potential targets for asteroseismology. But several other types of stars (delta scuti stars, roAP stars, and the pulsating white dwarfs) also have the desired pulsation characteristics. Pulsations in some of these stars are, for various reasons, much easier to observe than in the Sun-like stars. Virtually all unambiguous observations of multi-mode pulsators relate to these other categories of stars. Since oscillation mode frequencies are arguably the most precise measurement relating to a star that we can make, a few tens of such frequencies may still be of great importance to our understanding of the stellar structure and evolution.

Brown, Timothy M.↗

NASA NTRS1990

Ion Beam Heating in the Auroral Zone

Recent satellite observations at high altitudes (greater than 5000 km) in the auroral zone have shown the existence of hybrid or bimodal ion beam distributions that are evidence of both parallel and perpendicular ion acceleration. Acceleration parallel to the magnetic field is most likely due to quasi-static electric fields (double layers) which can create outflowing ion beams; since ions of different mass will have different drift speeds due to this acceleration, a plasma configuration unstable to the ion-ion two-stream acoustic mode develops. When the net drift velocity (U) between the two ion species is greater than the sound speed (C(sub 0)), the ion-ion instability has maximum growth at oblique wave propagation. To study the nonlinear effects of the ion-ion instability in terms of plasma heating, a numerical simulation parametric study has been performed. It was found that the parallel acceleration that forms the ion beams occurs on a time scale faster than ion- ion wave growth at low drifts; thus ion-ion wave growth is expected to occur primarily for higher drift speeds (U greater than C(sub 0)) which results in strong oblique heating of the ions (both hydrogen and oxygen) forming elevated ion conics (sometimes called 'bowl' distributions). Also, strong parallel electron heating in the direction of the ion beams can occur, and electrons near the top of the acceleration region may attain a net upward drift along with the elevated ion conics. Variation of the oxygen density greatly affects the ion heating due to the ion-ion instability; as the oxygen density decreases, oxygen heating increases, in agreement with observations (Collin et al., 1987). Ion-ion electrostatic wave properties and the plasma heating that results over a wide range of auroral zone parameters are included.

Schriver, David↗

NASA NTRS2000

Flow Duct Data for Validation of Acoustic Liner Codes for Impedance Eduction

The objective of the study reported here was to acquire acoustic and flow data with hard and lined duct wall duct sections for validation of a liner prediction code being developed at NASA LaRC. Both the mean flowfield and acoustic flowfields were determined in a cross-plane of the rectangular duct. A flow duct facility with acoustic drivers connected to a rectangular (4.7 x 2.0 inch) source section and a linear acoustic liner mounted downstream of the source section was used in this study. The liner section was designed to allow liner materials to be placed on all 4 walls of the duct. The test liner was of the locally-reacting type and was made from a ceramic material. The material, consisting of a tubular structure, was provided by NASA LaRC. The liner was approximately 8.89 cm (3.5 inches) thick. For the current study, only the two "short" sides of the duct were lined with liner material. The other two sides were hard walls. Two especially built instrumentation sections were attached on either sides of the liner section to allow acoustic and flow measurements to be made upstream and downstream of the liner. The two instrumentation duct sections were built to allow measurement of acoustic and flow properties at planes perpendicular to flow upstream and downstream of the liner section. The instrumentation section was also designed to provide a streamwise gradient in acoustic (complex) pressure from which the acoustic particle velocity, needed for the model validation, can be computed. Flow measurements included pressure, temperature, and velocity profiles upstream of the liner section. The in-flow sound pressure levels and phases were obtained with a microphone probe equipped with a nose cone in two cross planes upstream of the liner and two cross plane downstream of the liner. In addition to the acoustic measurements at the cross planes. axial centerline acoustic data was acquired using an axially traversing microphone probe which was traversed from a location upstream of the liner to some distance downstream of the liner. All probes used here had to be calibrated with respect to a standard microphone equipped with a nose cone to allow for the effects of flow.

Ahuja, K. K.↗

NASA NTRS2007

Pressure Measurement in Supersonic Air Flow by Differential Absorptive Laser-Induced Thermal Acoustics

Nonintrusive, off-body flow barometry in Mach-2 airflow has been demonstrated in a large-scale supersonic wind tunnel using seedless laser-induced thermal acoustics (LITA). The static pressure of the gas flow is determined with a novel differential absorption measurement of the ultrasonic sound produced by the LITA pump process. Simultaneously, stream-wise velocity and static gas temperature of the same spatially-resolved sample volume were measured with this nonresonant time-averaged LITA technique. Mach number, temperature and pressure have 0.2%, 0.4%, and 4% rms agreement, respectively, in comparison with known free-stream conditions.

Hart, Roger C.↗

NASA NTRS2009

A Comparative Study of a 1/4-Scale Gulfstream G550 Aircraft Nose Gear Model

A series of fluid dynamic and aeroacoustic wind tunnel experiments are performed at the University of Florida Aeroacoustic Flow Facility and the NASA-Langley Basic Aerodynamic Research Tunnel Facility on a high-fidelity -scale model of Gulfstream G550 aircraft nose gear. The primary objectives of this study are to obtain a comprehensive aeroacoustic dataset for a nose landing gear and to provide a clearer understanding of landing gear contributions to overall airframe noise of commercial aircraft during landing configurations. Data measurement and analysis consist of mean and fluctuating model surface pressure, noise source localization maps using a large-aperture microphone directional array, and the determination of far field noise level spectra using a linear array of free field microphones. A total of 24 test runs are performed, consisting of four model assembly configurations, each of which is subjected to three test section speeds, in two different test section orientations. The different model assembly configurations vary in complexity from a fully-dressed to a partially-dressed geometry. The two model orientations provide flyover and sideline views from the perspective of a phased acoustic array for noise source localization via beamforming. Results show that the torque arm section of the model exhibits the highest rms pressures for all model configurations, which is also evidenced in the sideline view noise source maps for the partially-dressed model geometries. Analysis of acoustic spectra data from the linear array microphones shows a slight decrease in sound pressure levels at mid to high frequencies for the partially-dressed cavity open model configuration. In addition, far field sound pressure level spectra scale approximately with the 6th power of velocity and do not exhibit traditional Strouhal number scaling behavior.

Khorrami, Mehdi R.↗

DOE OSTI2021

The antesonic condition for the explosion of core-collapse supernovae – II. Rotation and turbulence

In the problem of steady free fall on to a standing shockwave around a central mass, the ‘antesonic’ condition limits the regime of stable accretion to $c_T^2/v_\mathrm{esc}^2\le 3/16$, where cT is the isothermal sound speed in the subsonic post-shock flow, and vesc is the escape velocity at the shock radius. Above this limit, it is impossible to satisfy both the Euler equation and the shock jump conditions, and the system transitions to a wind. This physics explains the existence of a critical neutrino luminosity in steady-state models of accretion in the context of core-collapse supernovae. Here, we extend the antesonic condition to flows with rotation and turbulence using a simple one-dimensional formalism. Both effects decrease the critical post-shock sound speed required for explosion. While quite rapid rotation is required for a significant change to the critical condition, we show that the level of turbulence typically achieved in supernova simulations can greatly impact the critical value of $c_T^2/v_\mathrm{esc}^2$. A core angular velocity corresponding to a millisecond rotation period after contraction of the proto-neutron star results in only a ~5 percent reduction of the critical curve. In contrast, near-sonic turbulence with specific turbulent kinetic energy $K/c_T^2=0.5-1$, leads to a decrease in the critical value of $c_T^2/v_{\rm esc}^2$ by ~20 to 40 percent. This analysis provides a framework for understanding the role of post-shock turbulence in instigating explosions in models that would otherwise fail and helps explain why multidimensional simulations explode more easily than their one-dimensional counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2010

Establishing Consensus Turbulence Statistics for Hot Subsonic Jets

Many tasks in fluids engineering require knowledge of the turbulence in jets. There is a strong, although fragmented, literature base for low order statistics, such as jet spread and other meanvelocity field characteristics. Some sources, particularly for low speed cold jets, also provide turbulence intensities that are required for validating Reynolds-averaged Navier-Stokes (RANS) Computational Fluid Dynamics (CFD) codes. There are far fewer sources for jet spectra and for space-time correlations of turbulent velocity required for aeroacoustics applications, although there have been many singular publications with various unique statistics, such as Proper Orthogonal Decomposition, designed to uncover an underlying low-order dynamical description of turbulent jet flow. As the complexity of the statistic increases, the number of flows for which the data has been categorized and assembled decreases, making it difficult to systematically validate prediction codes that require high-level statistics over a broad range of jet flow conditions. For several years, researchers at NASA have worked on developing and validating jet noise prediction codes. One such class of codes, loosely called CFD-based or statistical methods, uses RANS CFD to predict jet mean and turbulent intensities in velocity and temperature. These flow quantities serve as the input to the acoustic source models and flow-sound interaction calculations that yield predictions of far-field jet noise. To develop this capability, a catalog of turbulent jet flows has been created with statistics ranging from mean velocity to space-time correlations of Reynolds stresses. The present document aims to document this catalog and to assess the accuracies of the data, e.g. establish uncertainties for the data. This paper covers the following five tasks: Document acquisition and processing procedures used to create the particle image velocimetry (PIV) datasets. Compare PIV data with hotwire and laser Doppler velocimetry (LDV) data published in the open literature. Compare different datasets acquired at roughly the same flow conditions to establish uncertainties. Create a consensus dataset for a range of hot jet flows, including uncertainty bands. Analyze this consensus dataset for self-consistency and compare jet characteristics to those of the open literature. One final objective fulfilled by this work was the demonstration of a universal scaling for the jet flow fields, at least within the region of interest to aeroacoustics. The potential core length and the spread rate of the half-velocity radius were used to collapse of the mean and turbulent velocity fields over the first 20 jet diameters in a highly satisfying manner.

Bridges, James↗

DOE OSTI2017

Primordial black holes in linear and non-linear regimes

We revisit the formation of primordial black holes (PBHs) in the radiation-dominated era for both linear and non-linear regimes, elaborating on the concept of an apparent horizon. Contrary to the expectation from vacuum models, we argue that in a cosmological setting a density fluctuation with a high density does not always collapse to a black hole. To this end, we first elaborate on the perturbation theory for spherically symmetric space times in the linear regime. Thereby, we introduce two gauges. This allows to introduce a well defined gauge-invariant quantity for the expansion of null geodesics. Using this quantity, we argue that PBHs do not form in the linear regime irrespective of the density of the background. Finally, we consider the formation of PBHs in non-linear regimes, adopting the spherical collapse picture. In this picture, over-densities are modeled by closed FRW models in the radiation-dominated era. The difference of our approach is that we start by finding an exact solution for a closed radiation-dominated universe. This yields exact results for turn-around time and radius. It is important that we take the initial conditions from the linear perturbation theory. Additionally, instead of using uniform Hubble gauge condition, both density and velocity perturbations are admitted in this approach. Thereby, the matching condition will impose an important constraint on the initial velocity perturbations δ {sup h} {sub 0} = −δ{sub 0}/2. This can be extended to higher orders. Using this constraint, we find that the apparent horizon of a PBH forms when δ > 3 at turn-around time. The corrections also appear from the third order. Moreover, a PBH forms when its apparent horizon is outside the sound horizon at the re-entry time. Applying this condition, we infer that the threshold value of the density perturbations at horizon re-entry should be larger than δ {sub th} > 0.7.

79 ASTRONOMY AND ASTROPHYSICS↗