Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Toward rational nanoparticle synthesis: predicting surface intermixing in bimetallic alloy nanocatalysts

In this paper, we present a database of first-principles calculated activation energy barriers for two competitive processes involving bimetallic adatom-surface permutations of ten transition metals: (i) adatom “hopping” diffusion and (ii) adatom substitution into the surface. We consider the surface structure sensitivity of these events as well as coverage effects. We find that surface hopping mechanisms are facile and always preferred to substitution events on close-packed fcc(111) and hcp(0001) surfaces. However, surface atom substitution is more facile on the more open fcc(100) surfaces and is competitive with adatom surface hopping, which is more difficult than on the close-packed surfaces. Finally, by comparing the absolute and relative magnitudes of the energetics of hopping and substitution, our calculations can offer qualitative predictions of intermixing and other phenomena relevant to nanocrystal growth, such as the tendency to form intermixed alloys or core–shell structures during layer-by-layer nanoparticle synthesis involving a given bimetallic pair, and thereby inform the rational design and synthesis of novel bimetallic nanomaterials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Operability and control in process intensification and modular design: Challenges and opportunities

Abstract In this article, the importance of considering operability and control criteria in the analysis and design of intensified and modular processes is discussed. We first analyze the impact on operability of key factors including: (i) degrees of freedom, (ii) process constraints, (iii) numbering up vs. scaling up, and (iv) dynamic/periodic operation. Comparative examples are presented to showcase the pros and cons in intensified/modular systems vs. their conventional counterparts from operability and control aspects. Then we look into metrics and tools to address these challenges such as: (i) flexibility analysis, (ii) operability‐based design, and (iii) advanced model‐based control. Considering different conceptual design stages as synthesis intensification, steady‐state design, and dynamic operational optimization, we highlight the need to incorporate different levels of operability considerations. Future research opportunities and perspectives are also identified, particularly emphasizing the importance of a holistic strategy for integrated design, operability, and control of intensified and modular process systems.

Pistikopoulos, Efstratios N.↗
DOE OSTI2019

Reticular chemistry in the rational synthesis of functional zirconium cluster-based MOFs

In the past two decades, reticular chemistry has developed into a powerful tool for the design and synthesis of porous, crystalline framework materials. The discovery of the first hexanuclear, zirconium cluster-based MOF (i.e. UiO-66; fcu net) led to a vast library of functional Zr-MOFs with various properties. The versatile connectivity of zirconium hexanuclear clusters and the adaptable tunability of organic ligands have resulted in the rational synthesis of a large set of Zr-MOFs based on edge-transitive nets; these nets commonly exists in crystalline network structures as suggested by reticular chemistry. In this review, we summarize recent advances in the synthesis of zirconium cluster-based MOFs in the light of reticular chemistry design principles. Isoreticular tuning of MOF parent structures and post-synthetic modification of Zr-MOFs for targeted applications are also deliberated.

Reticular chemistry↗
DOE OSTI2015

Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Guiding Synthesis of Polymorphs of Materials Using Nanometric Phase Diagrams

Conventionally, phase diagrams serve as road maps for the design and synthesis of materials. However, bulk phase diagrams are often not as predictive for the synthesis of nanometric materials, mainly due to the increased significance of surface energy. The change of surface energy can drastically alter the total energy of the nanocrystals thus yield a polymorph or meta-stable phase different than the stable phase in bulk, providing a means for controlling the synthesis of metastable phases. To achieve a theoretical and systematical understanding on the polymorphism of nanomaterials, metallic cobalt was chosen as a model system, where the two polymorphs, fcc and hcp phases, can be tuned with 100% selectivity in a solvothermal reaction. Advanced in situ synchrotron X-ray diffraction (XRD) technique and density functionals theory (DFT) were complementary employed to reveal the size and surface dependent polymorphism at nanometer scale. Furthermore, the nanometric phase diagram provides a general predictive approach to guide the synthesis of metastable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO 2 Capture Application

The design and synthesis of porous carbons for CO 2 adsorption have attracted tremendous interest owing to the ever-soaring concerns regarding climate change and global warming. Herein, for the first time, nitrogen-rich porous carbon was prepared with chemical activation (KOH) of commercial melamine formaldehyde resin (MF) in a single step. It has been shown that the porosity parameters of the as-prepared carbons were successfully tuned by controlling the activating temperature and adjusting the amount of KOH. Thus, as-prepared N-rich porous carbon shows a large surface area of 1658 m 2 /g and a high N content of 16.07 wt%. Benefiting from the unique physical and textural features, the optimal sample depicted a CO 2 uptake of up to 4.95 and 3.30 mmol/g at 0 and 25 °C under 1 bar of pressure. More importantly, as-prepared adsorbents show great CO 2 selectivity over N 2 and outstanding recyclability, which was prominently important for CO 2 capture from the flue gases in practical application. An in-depth analysis illustrated that the synergetic effect of textural properties and surface nitrogen decoration mainly determined the CO 2 capture performance. However, the textural properties of carbons play a more important role than surface functionalities in deciding CO 2 uptake. In view of cost-effective synthesis, outstanding textural activity, and the high adsorption capacity together with good selectivity, this advanced approach becomes valid and convenient in fabricating a unique highly efficient N-rich carbon adsorbent for CO 2 uptake and separation from flue gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Atomic Layer Deposition of Metal Sulfide Materials

The field of nanoscience is delivering increasingly intricate yet elegant geometric structures incorporating an ever-expanding palette of materials. Atomic layer deposition (ALD) is a powerful driver of this field, providing exceptionally conformal coatings spanning the periodic table and atomic-scale precision independent of substrate geometry. This versatility is intrinsic to ALD and results from sequential and self-limiting surface reactions. This characteristic facilitates digital synthesis, in which the film grows linearly with the number of reaction cycles. While the majority of ALD processes identified to date produce metal oxides, novel applications in areas such as energy storage, catalysis, and nanophotonics are motivating interest in sulfide materials. Recent progress in ALD of sulfides has expanded the diversity of accessible materials as well as a more complete understanding of the unique chalcogenide surface chemistry.

Dasgupta, Neil P.↗
DOE OSTI2021

Denary oxide nanoparticles as highly stable catalysts for methane combustion

Oxide nanoparticles with elemental and structural diversity are widely studied for catalysis and energy applications. While compositional control holds great promise for materials discovery, current oxide nanoparticles are typically limited to a few cations due to the intrinsic complexity in nanoscale multi-element mixing. Here we report the rational design and synthesis of single-phase multi-element oxide nanoparticles with tunable composition, size and structure. We have identified temperature-, oxidation- and entropy-driven synthesis strategies to mix a range of elements with largely dissimilar oxidation potentials (including palladium), thus greatly expanding the compositional space. Through rapid synthesis and screening, we obtained a denary multi-element oxide catalyst showing high performance and superior stability for catalytic methane combustion over 100 hours due to the high-entropy design and stabilization. Finally, our work therefore provides a viable synthesis route with clear guidelines for multi-element oxide nanoparticles and enables materials design in the multi-element space towards highly stable catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Biomimicry in metal-organic materials

Nature has evolved a great number of biological molecules which serve as excellent constructional or functional units for metal-organic materials (MOMs). Even though the study of biomimetic MOMs is still at its embryonic stage, considerable progress has been made in the past few years. In this critical review, we will highlight the recent advances in the design, development and application of biomimetic MOMs, and illustrate how the incorporation of biological components into MOMs could further enrich their structural and functional diversity. More importantly, this review will provide a systematic overview of different methods for rational design of MOMs with biomimetic features. Published by Elsevier B.V.

Zhang, MW↗
DOE OSTI2015

Synthesis of phase-pure and monodisperse iron oxide nanoparticles by thermal decomposition

We present a comprehensive template for the design and synthesis of iron oxide nanoparticles with control over size, size distribution, phase, and resulting properties. Monodisperse superparamagnetic iron oxide nanoparticles were synthesized by thermal decomposition of three different iron containing precursors (iron oleate, iron pentacarbonyl, and iron oxyhydroxide) in organic solvents under a variety of synthetic conditions. We compare the suitability of these three kinetically controlled synthesis protocols, which have in common the use of iron oleate as a starting precursor or reaction intermediate, for producing nanoparticles with specific size and magnetic properties. Monodisperse particles were produced over a tunable range of sizes from approximately 2-30 nm. Reaction parameters such as precursor concentration, addition of surfactant, temperature, ramp rate, and time were adjusted to kinetically control size and size-distribution. In particular, large quantities of excess surfactant (up to 25:1 molar ratio) alter reaction kinetics and result in larger particles with uniform size; however, there is often a trade-off between large particles and a narrow size distribution. Iron oxide phase is also critical for establishing magnetic properties. As an example, we show the importance of obtaining the required iron oxide phase for application to Magnetic Particle Imaging (MPI), and describe how phase purity can be controlled.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2015

Topology-Guided Design and Syntheses of Highly Stable Mesoporous Porphyrinic Zirconium Metal-Organic Frameworks with High Surface Area

Through a topology-guided strategy, a series of Zr-6-containing isoreticular porphyrinic metalorganic frameworks (MOFs), PCN-228, PCN-229, and PCN-230, with ftw-a topology were synthesized using the extended porphyrinic linkers. The bulky porphyrin ring ligand effectively prevents the network interpenetration which often appears in MOFs with increased linker length. The pore apertures of the structures range from 2.5 to 3.8 nm, and PCN-229 demonstrates the highest porosity and BET surface area among the previously reported Zr-MOFs. Additionally, by changing the relative direction of the terminal phenyl rings, this series replaces a Zr-8 cluster with a smaller Zr-6 cluster in a topologically identical framework. The high connectivity of the Zr-6 cluster yields frameworks with enhanced stability despite high porosity and ultralarge linker. As a representative example, PCN-230, constructed with the most extended porphyrinic linker, shows excellent stability in aqueous solutions with pH values ranging from 0 to 12 and demonstrates one of the highest pH tolerances among all porphyrinic MOFs. This work not only presents a successful example of rational design of MOFs with desired topology, but also provides a strategy for construction of stable mesoporous MOFs.

Liu, TF↗
DOE OSTI2019

High-Dimensional Spectral Sampling

A wide variety of applications in science and engineering depend on effectively and efficiently exploring high- dimensional parameter spaces. Common examples are uncertainty quantification, inverse problems, or various optimization approaches. In such applications, the first step is to create an initial uniform, random sampling of the space to create a baseline of knowledge. The simulations evaluated at these samples are then used for subsequent processing. In its most generic form, the goal of sampling is to produce the maximal amount of information with the minimal number of samples. However, despite being the first step and thus influencing the performance of the entire workflow, the quality of the initial sample designs is rarely analyzed or optimized. This project develops a new spectral sampling theory for analyzing and creating experiment designs in high-dimensional spaces. Further, new algorithms for estimating sample properties and sample synthesis are designed. Finally, applications of the proposed spectral sampling tools in surrogate modeling, scientific machine learning and image analysis are presented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

SODA: a New Synthesis Infrastructure for Agile Hardware Design of Machine Learning Accelerators

Next generation systems, such as edge devices, will have to provide efficient processing of machine learning (ML) algorithms along several metrics, including energy, performance, area, and latency. However, the quickly evolving field of ML makes it extremely difficult to generate accelerators able to support a wide variety of algorithms. At the same time, designing accelerators in hardware description languages (HDLs) by hand is hard and time consuming, and does not allow quick exploration of the design space. This paper discusses the SODA synthesizer, an automated open source high-level ML framework-to-Verilog compiler targeting ML Application-Specific Integrated Circuits (ASICs) chiplets based on the LLVM infrastructure. The SODA synthesizers will allow implementing optimal designs by combining templated and fully tunable IPs and macros, and fully custom components generated through high-level synthesis. All these components will be provided through an extendable resource library, characterized with both commercial and open source logic design flows. Through a closed loop design space exploration engine, developers will be able to quickly explore their hardware designs along different dimension

Minutoli, Marco↗
DOE OSTI2015

Step-by-step growth of complex oxide microstructures

The synthesis of complex and hybrid oxide microstructures is of fundamental interest and practical applications. However, the design and synthesis of such structures is a challenging task. We developed a solution phase process to synthesize complex silica and silica titania hybrid microstructures by exploiting the emulsion droplet based shape control and step by step growth. The strategy is robust and can be extended to make complex hybrid structures made of two or more materials while each having its own shape.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Substructuring decomposition and controller synthesis

A decentralized design procedure is proposed for the control design for flexible structures. The structure to be controlled is decomposed into several substructures by using a natural decomposition called substructuring decomposition. For each substructure, a subcontroller is designed by using the linear quadratic optimal control theory. Then, a controller synthesis scheme called Substructural Controller Synthesis (SCS) is used to assemble the subcontrollers into a system controller, which is to be used to control the whole structure. A plane truss example is used to illustrate the efficacy of the proposed method.

Su, Tzu-Jeng↗
DOE OSTI2024

Heteroatom-Modified and Compacted Zeolite-Templated Carbons for Gas Storage

Methane, the primary component of natural gas, is an energy-rich fuel by weight but exhibits lower energy density by volume than diesel and gasoline; efforts to increase its “volumetric” energy density have been focused on the design and synthesis of a porous scaffold that can bind the methane favorably. Novel approaches typically invoke the highly designable class of materials known as metal-organic frameworks (MOFs) owing to the relative difficulty of controlling carbon structure and composition precisely, without the use of a metal-based node. In this project, we instead explore the concept of carbon templating to achieve a porous scaffold with atomistically thin walls separated at a distance of ~1.2 nm, ideal for the formation of precisely two layers of methane per pore. This bottom-up templating approach permits the use of any small molecular precursor to build up the carbon scaffold, begging the question: which other elements (besides carbon) can be used to tune the surface for optimal methane binding without compromising the structure of the overall material? Boron and nitrogen were both explored and nitrogen was identified as the ideal agent for increasing methane binding to the optimal strength for use at near room temperature. Densification of the resulting materials by mechanical compaction was then explored to produce free-standing pellets with the highest methane “delivery” capacities of any known material. Here we define the amount “delivered” as the amount stored minus the amount remaining in the tank at 73 psi, the lowest useful pressure for vehicular transportation applications. The key features of the resulting methane storage system are rapid discharging and refueling speeds, extremely long cycle life (infinite cycle life for high-purity methane), a near-constant heat of refueling (making the heat generated upon refueling easier to manage), and a low maximum pressure of operation (<1500 psi), enabling the use of all-metal Type I cylinders and significantly reducing the costs of conversion of existing vehicles to cleaner burning, abundantly available natural gas). The technical effectiveness of this approach was further improved by exploring several cost-reduction strategies and investigating the reliability of such storage systems in the presence of “real” natural gas mixtures which contain a mixture of gaseous species.

03 NATURAL GAS↗
DOE OSTI2023

Rational design of stable functional metal–organic frameworks

Functional porous metal–organic frameworks (MOFs) have been explored for a number of potential applications in catalysis, chemical sensing, water capture, gas storage, and separation. MOFs are among the most promising candidates to address challenges facing our society related to energy and environment, but the successful implementation of functional porous MOF materials are contingent on their stability; therefore, the rational design of stable MOFs plays an important role towards the development of functional porous MOFs. In this Focus article, we summarize progress in the rational design and synthesis of stable MOFs with controllable pores and functionalities. The implementation of reticular chemistry allows for the rational top-down design of stable porous MOFs with targeted topological networks and pore structures from the pre-selected building blocks. We highlight the reticular synthesis and applications of stable MOFs: (1) MOFs based on high valent metal ions (e.g., Al 3+ , Cr 3+ , Fe 3+ , Ti 4+ and Zr 4+ ) and carboxylate ligands; (2) MOFs based on low valent metal ions (e.g., Ni 2+ , Cu 2+ , and Zn 2+ ) and azolate linkers. We envision that the synthetic strategies, including modulated synthesis and post-synthetic modification, can potentially be extended to other more complex systems like metal-phosphonate framework materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗