Search NASA⌕ Search

SEARCH · Search NASA

Results for “TEMPERATURE EFFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Results from an extensive Einstein stellar survey

The preliminary results of the Einstein Observatory stellar X-ray survey are presented. To date, 143 soft X-ray sources have been identified with stellar counterparts, leaving no doubt that stars in general constitute a pervasive class of low-luminosity galactic X-ray sources. Stars along the entire main sequence, of all luminosity classes, pre-main sequence stars as well as very evolved stars have been detected. Early type OB stars have X-ray luminosities in the range 10 to the 31st to 10 to the 34th ergs/s; late type stars show a somewhat lower range of X-ray emission levels, from 10 to the 26th to 10 to the 31st ergs/s. Late type main-sequence stars show little dependence of X-ray emission levels upon stellar effective temperature; similarly, the observations suggest weak, if any, dependence of X-ray luminosity upon effective gravity. Instead, the data show a broad range of emission levels (about three orders of magnitude) throughout the main sequence later than F0.

Vaiana, G. S.↗
NASA NTRS1985

Far-infrared and submillimeter survey of the galactic center and nearby galactic plane

Maps are presented with 12-arcmin resolution of the Galactic Center and adjacent galactic plane, from l(Pc) = 359 deg to l(Pc) = 5 deg. The data were obtained with the Steward Observatory's cryogenically-cooled, balloon-borne telescope. The data are from channels filtered for a bandpass of 70 to 110 microns and for a longpass of wavelength greater than 80 microns. For the typical effective temperature of 25 K of a galactic H II region at this spatial resolution, the effective wavelengths of the channels are 93 microns and 145 microns. Continuous emission is mapped along the galactic plane in both wavelengths. There are two contrasts between the immediate vicinity of SgrA l(Pc) smaller than 1 deg, and the galactic plane in general. Firstly, for l(Pi) greater than 1 deg the galactic plane narrows dramatically at 93 microns, while retaining its width at 145 microns. Secondly, the individual sources at l(Pc) (which are associated with H II regions) have greater peak brightness in the 145-micron channel than the 93-micron channel, while SgrA has approximately equal peak brightness in each. The maps demonstrate the importance of submillimeter wavelengths to galactic surveys.

Campbell, M. F.↗
NASA NTRS1985

Far infrared and submillimeter brightness temperatures of the giant planets

The brightness temperatures of Jupiter, Saturn, Uranus, and Neptune in the range 35 to 1000 micron. The effective temperatures derived from the measurements, supplemented by shorter wavelength Voyager data for Jupiter and Saturn, are 126.8 + or - 4.5 K, 93.4 + or - 3.3 K, 58.3 + or - 2.0 K, and 60.3 + or - 2.0 K, respectively. The implications of the measurements for bolometric output and for atmospheric structure and composition are discussed. The temperature spectrum of Jupiter shows a strong peak at approx. 350 microns followed by a deep valley at approx. 450 to 500 microns. Spectra derived from model atmospheres qualitatively reproduced these features but do not fit the data closely.

Hildebrand, R. H.↗
NASA NTRS1986

Infrared observations of the Uranian system

Initial results are presented from analyses of IR interferometer spectrometer data collected by Voyager 2 during passes of Uranus and the moons Miranda and Ariel. The data covered reflected solar radiation in the visible and near-IR and thermal emissions between 25 and 50 microns. An equatorial atmospheric He mole fraction of 0.10-0.20 and a mass fraction of 0.16-0.34 was observed for Uranus. Para-hydrogen was also a significant fraction Uranus CH4 atmosphere. Average polar and equatorial spectra were employed to generate vertical temperature profiles between 60-900 mbar, with the finding that the temperatures at the equator and the poles are markedly similar between 400-900 mbar. The effective temperature of Uranus had a calculated upper limit of about 59.4 K, while the subsolar temperatures of Miranda and Arial were around 86 and 84 K, respectively. The albedos of the two satellites indicated surface microstructures composed of isotopically scattering grains.

Hanel, R.↗
NASA NTRS1989

Model atmospheres for K and M giants

To aid in the interpretations of observations of K and M giant stars, model atmospheres have been calculated, covering the range in effective temperature between 3000 and 4000 K and in surface gravity-log g between 0.0 and 2.0. These models are computed under the usual assumptions of hydrostatic equilibrium, constancy of total (radiative plus convective) flux, and LTE in plane-parallel, horizontally homogeneous geometry. A significant development in these models is the incorporation of an opacity-sampled treatment of absorption by water vapor, which becomes dominant at lower temperatures. The thermal structure and scaling properties of the models are discussed, as are the effects of certain composition changes expected in the course of stellar evolution.

Brown, Jeffery A.↗
NASA NTRS1997

Effect of Coolant Temperature and Mass Flow on Film Cooling of Turbine Blades

A three-dimensional Navier Stokes code has been used to study the effect of coolant temperature, and coolant to mainstream mass flow ratio on the adiabatic effectiveness of a film-cooled turbine blade. The blade chosen is the VKI rotor with six rows of cooling holes including three rows on the shower head. The mainstream is akin to that under real engine conditions with stagnation temperature = 1900 K and stagnation pressure = 3 MPa. Generally, the adiabatic effectiveness is lower for a higher coolant temperature due to nonlinear effects via the compressibility of air. However, over the suction side of shower-head holes, the effectiveness is higher for a higher coolant temperature than that for a lower coolant temperature when the coolant to mainstream mass flow ratio is 5% or more. For a fixed coolant temperature, the effectiveness passes through a minima on the suction side of shower-head holes as the coolant to mainstream mass flow, ratio increases, while on the pressure side of shower-head holes, the effectiveness decreases with increase in coolant mass flow due to coolant jet lift-off. In all cases, the adiabatic effectiveness is highly three-dimensional.

Garg, Vijay K.↗
DOE OSTI2022

Static and Dynamic Correlations in Water: Comparison of Classical Ab Initio Molecular Dynamics at Elevated Temperature with Path Integral Simulations at Ambient Temperature

It is a common practice in ab initio molecular dynamics (AIMD) simulations of water to use an elevated temperature to overcome the overstructuring and slow diffusion predicted by most current density functional theory (DFT) models. The simulation results obtained in this distinct thermodynamic state are then compared with experimental data at ambient temperature based on the rationale that a higher temperature effectively recovers nuclear quantum effects (NQEs) that are missing in the classical AIMD simulations. In this work, we systematically examine the foundation of this assumption for several DFT models as well as for the many-body MB-pol model. Here, we find for the cases studied that a higher temperature does not correctly mimic NQEs at room temperature, which is especially manifest in significantly different three-molecule correlations as well as hydrogen bond dynamics. In many of these cases, the effects of NQEs are the opposite of the effects of carrying out the simulations at an elevated temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Calculations of the spectral nature of the microwave emission from soils

The brightness temperatures for a set of soil profiles observed at USDA facilities in Arizona and Georgia were calculated at the wavelengths of 2.8, 6, 11, 21, and 49 cm using a coherent radiative transfer model. The soil moisture sampling depth is found to be a function of wavelength and is in the range 0.06 to 0.1 of a wavelength. The thermal sampling depth also depends on wavelength and is approximately equal to one wavelength at dry soil condition and 0.1 - 0.5 wavelengths at wet soil conditions. Calculated values of emissivity show strong diurnal variations when the soils are wet, while there is little diurnal change when the soil is dry. The soil moistures within the four depth intervals of 0-2, 0-5, 0-9, and 0-15 cm were parameterized as function of the calculated emissivity and brightness temperature. Best-fit parameters and correlation coefficients are presented for five wavelengths. Interrelationships among the effective temperature, surface temperature, and emissivity are displayed.

Mo, T.↗
NASA NTRS1985

Connection between variations of the atmosphere temperature profile and variations of the meson component intensity

The influence of temperature effects on intensity variations of the cosmic ray meson component were studied. The connection between the temperature variation delta T and the intensity variation delta I was established by using the temperature coefficient density technique. To realize how many devices are needed on the Earth for predicting the temperature variation of the atmosphere profile with a reasonable accuracy, IO isobaric levels and IO were calculated. The set of initial elements of the cosmic ray mesons are varied and it is shown that the matrix of the coefficients B sub ij is rather sensitive to their choice. It is found that if for the calculations of the atmospheric temperature variations the model is used, the number of meson components, essentially exceeding 3, should be considered.

Blokh, Y. L.↗
NASA NTRS2003

Origin of Stability in Particle Sedimentation

Particle Image Velocimetry (PIV) is used to study the slow settling motions of spheres in suspensions ranging from dilute to highly concentrated, 0.0001 less than phi less than 0.50. During sedimentation, particle velocity fluctuations are found to be organized into regions of characteristic size xi approximately 11 a phi (exp -1/3). A simple model, based upon buoyant mass fluctuations DELTAm given by random density fluctuations in a region of size xi, accurately predicts the magnitudes of the velocity fluctuations DELTAV. We also find a new universal relation for particle diffusion during sedimentation. It can be written in a Stokes-Einstein form as Dapproximately(DELTAmxi)/(6pietaxi), where the effective temperature DELTAmgxi is the gravitational potential energy of density fluctuations. In addition related experiments examining inertial effects and transient states, that are aimed at uncovering the origin of the new lengthscale xi, will also be given.

Segre, Philip N.↗
DOE OSTI2021

The Sonora Substellar Atmosphere Models. II. Cholla: A Grid of Cloud-free, Solar Metallicity Models in Chemical Disequilibrium for the JWST Era

Exoplanet and brown dwarf atmospheres commonly show signs of disequilibrium chemistry. In the James Webb Space Telescope (JWST) era, high-resolution spectra of directly imaged exoplanets will allow the characterization of their atmospheres in more detail, and allow systematic tests for the presence of chemical species that deviate from thermochemical equilibrium in these atmospheres. Constraining the presence of disequilibrium chemistry in these atmospheres as a function of parameters such as their effective temperature and surface gravity will allow us to place better constraints on the physics governing these atmospheres. This paper is part of a series of works presenting the Sonora grid of atmosphere models. In this paper, we present a grid of cloud-free, solar metallicity atmospheres for brown dwarfs and wide-separation giant planets with key molecular species such as CH 4 , H 2 O, CO, and NH 3 in disequilibrium. Our grid covers atmospheres with T eff ∈ [500 K, 1300 K], log g ∈ [3.0, 5.5] (cgs) and an eddy diffusion parameter of logK zz = 2,4 and 7 (cgs). We study the effect of different parameters within the grid on the temperature and composition profiles of our atmospheres. We discuss their effect on the near-infrared colors of our model atmospheres and the detectability of CH 4 , H 2 O, CO, and NH 3 using the JWST. We compare our models against existing MKO and Spitzer observations of brown dwarfs and verify the importance of disequilibrium chemistry for T dwarf atmospheres. Finally, we discuss how our models can help constrain the vertical structure and chemical composition of these atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

Effect of temperature-dependent electrical conductivity on transport processes in magnetosolidmechanics

The effect of temperature-dependent electrical conductivity on transport processes for a solid block is analyzed on the basis of a one-dimensional steady-state model under specified thermal boundary conditions. Assumptions are that the solid has an infinitely segmented electrode configuration, the magnetic field (By) may be resolved into a constant applied field and an induced field, the gradient of the electrochemical potential is equal to the electrostatic potential, a constant potential difference is applied externally across each pair of opposite electrodes, and all material properties except electrical conductivity are constant. Conductivity is expressed in normalized form in terms of a baseline conductivity and a constant for the material. The application of the assumptions of the model to the general phenomenological relations yields the governing equations. Solution of these equations gives the distribution of temperature, electric current density, and magnetic field strength along the length of the solid. It is shown that significant differences exist between the case for constant electrical conductivity and the case where electrical conductivity is temperature dependent.

Craig, G. T.↗
NASA NTRS1999

Effect of High Temperature on the Tensile Behavior of CFRP and Cementitious Composites

Concrete and other composite manufacturing processes are continuing to evolve and become more and more suited for use in non-Earth settings such as the Moon and Mars. The fact that structures built in lunar environments would experience a range of effects from temperature extremes to bombardment by micrometeorites and that all the materials for concrete production exist on the Moon means that concrete appears to be the most feasible building material. it can provide adequate shelter from the harshness of the lunar environment and at the same time be a cost effective building material. With a return to the Moon planned by NASA to occur after the turn of the century, it will be necessary to include concrete manufacturing as one of the experiments to be conducted in one of the coming missions. Concrete's many possible uses and possibilities for manufacturing make it ideal for lunar construction. The objectives of this research are summarized as follows: i) study the possibility of concrete production on the Moon or other planets, ii) study the effect of high temperature on the tensile behavior of concrete, and iii) study the effect of high temperature on the tensile behavior of carbon fiber reinforced with inorganic polymer composites. Literature review indicates that production of concrete on the Moon or other planets is feasible using the indigenous materials. Results of this study has shown that both the tensile strength and static elastic modulus of concrete decreased with a rise in temperature from 200 to 500 C. The addition of silica fume to concrete showed higher resistance to high temperatures. Carbon fiber reinforced inorganic polymer (CFRIP) composites seemed to perform well up to 300 C. However, a significant reduction in strength was observed of about 40% at 400 C and up to 80% when the specimens were exposed to 700 C.

Toutanji, Houssam A.↗
NASA NTRS1972

Magnetic storm effects in the neutral composition.

Demonstration that the thermospheric wind circulation excited during magnetic storms, presumably by Joule heating within the auroral zone, is an effective mechanism for removing atomic oxygen at high latitudes. Wind-induced variations in O exceed the temperature effects up to 250 km. The calculated depletion is most pronounced at around 180 km, where the density can decrease by as much as a factor of two, consistent with the observed storm time variations in the ionosphere. At higher altitudes, this effect is canceled by the thermal expansion in atomic oxygen, thus explaining the negligible response in the concentration of this atmospheric constituent under disturbed conditions, when N2 increased by as much as a factor of ten.

Mayr, H. G.↗
NASA NTRS1981

Solar-pumped electronic-to-vibrational energy transfer lasers

The possibility of using solar-pumped lasers as solar energy converters is examined. The absorbing media considered are halogens or halogen compounds, which are dissociated to yield excited atoms, which then hand over energy to a molecular lasing medium. Estimates of the temperature effects for a Br2-CO2-He system with He as the cooling gas are given. High temperatures can cause the lower energy levels of the CO2 laser transition to be filled. The inverted populations are calculated and lasing should be possible. However, the efficiency is less than 0.001. Examination of other halogen-molecular lasant combinations (where the rate coefficients are known) indicate efficiencies in all cases of less than 0.005.

Harries, W. L.↗
NASA NTRS1989

The UV silicon spectra of early B stars

Equivalent widths of UV silicon lines obtained from high dispersion IUE SWP spectra for a sample of 37 mid- to early B stars are presented. These are compared to other atmospheric diagnostics and to model atmosphere calculations. It is found that some of the UV silicon lines are extremely sensitive to stellar temperature and luminosity over the range B5-B0.5, or roughly a factor of two in effective temperature. The potential usefulness of these lines is stressed, and it is demonstrated that they could determine temperatures and surface gravities to the same accuracy as other commonly used diagnostics once adequate models become available. Although the available models fail to predict the quantitative behavior of the line strengths, they do, in most instances, describe their qualitative behavior. Since the existing models are somewhat out of date, the results suggest that models based upon more complete opacity tables may be quite reliable.

Massa, D.↗
NASA NTRS2000

New Submount Requirement of Conductively Cooled Laser Diodes for Lidar Applications

New submount technology is essential for the development of conductively cooled high power diode laser. The simulation and experimental results indicate that thermal conductivity of submount for high power laser-diode must be at least 600 W/m/k or higher for stable operation. We have simulated several theoretical thermal model based on new submount designs and characterized high power diode lasers to determine temperature effects on the performances of laser diodes. The characterization system measures the beam power, output beam profile, temperature distribution, and spectroscopic property of high power diode laser. The characterization system is composed of four main parts: an infrared imaging camera, a CCD camera, a monochromator, and a power meter. Thermal characteristics of two commercial-grade CW 20-W diode laser bars with open heat-sink type were determined with respect to the line shift of emission spectra and beam power stability. The center wavelength of laser emission has a tendency to shift toward longer wavelength as the driving current and heat sink temperature are increased. The increase of heat sink temperature decreases the output power of the laser bar too. Such results lay the guidelines for the design of new submount for high power laser-diodes.

Mo, S. Y.↗