Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Roughness of Ti Substrates for Control of the Preferred Orientation of TiO 2 Nanotube Arrays as a New Orientation Factor

We report the surface roughness of a Ti substrate as a critical factor for controlling the degree of the preferred orientation of anatase TiO2 nanotube arrays (NTAs) which are synthesized by anodization and a subsequent annealing process. The degree of the preferred orientation to the (004) plane of the anatase crystal structure has a strong dependency on the root-mean-square roughness (Sq) of the initial Ti substrate when the roughness-controlled substrates are anodized in an ethylene glycol-based electrolyte containing ~2 wt % of water. Highly preferred oriented NTAs were obtained from low-Sq (<10 nm) substrates, which were accompanied by uniform pore distribution and low concentration of hydroxyl ions in as-anodized amorphous NTAs. The mechanism of the preferred oriented crystallization of nanometer-scaled tube walls is explained considering the microscopic geometrical uniformity of the oxide barrier and nanopores at the early stage of anodization, which affected the local electric field and thus the insertion of the hydroxyl group into the amorphous TiO2 tube walls.

14 SOLAR ENERGY↗

Visible Photoelectrochemical Water Splitting Based on a Ru(II) Polypyridyl Chromophore and Iridium Oxide Nanoparticle Catalyst

Preparation of Ru(II) polypyridyl-iridium oxide nanoparticle (IrO X NP) chromophore-catalyst assemblies on an FTO$|nano$ITO$|$TiO2 core/shell by a layer-bylayer procedure is described for application in dye-sensitized photoelectrosynthesis cells (DSPEC). Significantly enhanced, bias-dependent photocurrents with Lumencor 455 nm 14.5 mW/cm 2 irradiation are observed for core/shell structures compared to TiO 2 after derivatization with [Ru(4,4$'$-PO 3 H 2 bpy) 2 (bpy)] 2+ (RuP 2 ) and uncapped IrO X NPs at pH 5.8 in NaSiF6 buffer with a Pt cathode. Photocurrents arising from photolysis of the resulting photoanodes, FTO$|nano$ITO$|$TiO 2 |-RuP 2 ,IrO 2 , are dependent on TiO2 shell thickness and applied bias, reaching 0.2 mA/cm2 at 0.5 V vs AgCl/Ag with a shell thickness of 6.6 nm. Long-term photolysis in the NaSiF6 buffer results in a marked decrease in photocurrent over time due to surface hydrolysis and loss of the chromophore from the surface. Long-term stability, with sustained photocurrents, has been obtained by atomic layer deposition (ALD) of overlayers of TiO 2 to stabilize surface binding of -RuP 2 prior to the addition of the IrO X NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Ti Incorporation on Hydroxylation and Wetting of Fe 3 O 4

Understanding the interaction of water with compositionally tuned metal oxides is central to exploiting their unique catalytic and magnetic properties. However, processes such as hydroxylation, wetting, and resulting changes in electronic structure at ambient conditions are challenging to probe in situ. Here, we examine the hydroxylation and wetting of Fe(3-x)TixO4 epitaxial films directly using ambient pressure X-ray photoelectron spectroscopy under controlled relative humidity. Fe2+ formation promoted by Ti4+ substitution for Fe3+ increases with hydroxylation, commensurate with a decrease in the surface work function or change in the surface dipole. The incorporation of small amounts of Ti (x=0.25) as a bulk dopant dramatically impacts hydroxylation, in part due to surface segregation, leading to coverages closer to that of TiO2 than Fe3O4. However, the Fe(3-x)TixO4 compositional series shows a similar affinity for water physisorption, which begins at notably lower relative humidity than on TiO2. The findings suggest that relative humidity rather than surface hydroxyl density controls wettability. Studies of this kind directly relate to rational design of doped magnetite into more active catalysts for UV/Fenton degradation, the adsorption of contaminants, and the development of spin filters.

Environmental Molecular Sciences Laboratory↗

Formation of Metastable Water Chains on Anatase TiO 2 (101)

Anatase TiO2 is indispensable material for energy-harvesting applications and catalysis. In this study, we employ scanning tunneling microscopy (STM) and study water adsorption on most stable TiO2(101) surface of anatase. We demonstrate that at very low temperatures (80 K), water has the transient mobility that allows it to move on the surface and form extended chains. In contrast with many other oxides, these water chains are only metastable in nature. Adsorption at higher temperatures, where sustained diffusion is observed (190 K) leads to isolated water monomers in accord with prior literature. We speculate that the observed low-temperature mobility is a result of adsorption in a long-lived precursor state with a low diffusion barrier.

Adsorption↗

A New Mechanism For XPS Line Broadening: The 2p-XPS of Ti(IV)

There is almost a factor of two increase in the FWHM of the main Ti2p1/2 XPS peak compared to the 2p3/2 in the closed shell Ti(IV) compounds TiO2 and STO. Although the spectra of anatase and rutile forms of TiO2 differ slightly from STO, the 2p1/2 broadening over 2p3/2 is very similar. For STO, we show that ascribing this differential broadening to a short 2p1/2 lifetime is unphysical. For STO, rigorous and fully relativistic electronic structure calculations have been carried out for both the initial state and the 2p core-hole states; these calculations include many-body effects as well as the one-body effects of spin-orbit and ligand field splittings. The agreement of the theoretical and measured XPS for the main 2p1/2 and 2p3/2 peaks indicate that the necessary one and many-body effects have been included. They show that the broadening is due to the presence of XPS intensity distributed over many unresolved final states for a 2p1/2 core-hole, whereas the 2p3/2 core-hole has the expected single symmetric peak. The many-body effects for the core-hole states involve mixing of the normal, single-hole, configurations with shake up configurations where valence electrons are promoted from filled orbitals into empty orbitals. This configuration mixing allows configurations with a 2p1/2 core-hole to mix with those that have a 2p3/2 core-hole; an effect which, to our knowledge, has not been previously considered. It is the mixing of XPS allowed 2p1/2 excitations with XPS forbidden 2p3/2 shake configurations that leads to the distribution of the 2p1/2 XPS intensity over several final states and the 2p1/2 XPS broadening is reproduced using a realistic lifetime for the 2p1/2 core-hole. This novel mechanism for the broadening of XPS features might be more general than solely for the 2p XPS of Ti(IV) oxides. The calculations also show the presence of major covalency for the STO orbitals which is larger for the 2p core-hole configuration than for the ground state, proving that the change in covalency is a major contribution to the core-hole screening.

XPS, Lifetime Broadening, Shake Satellites↗

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗

Synthesis and Characterization of Amorphous Lawsone Polymer Dots for Fluorescent Applications

In this work, a two-step hydrothermal/solvothermal process was developed to generate highly fluorescent lawsone polymer dots (LPDs) utilizing an inexpensive and abundant starting material, 2-hydroxy-1,4-napththoquinone (lawsone). This hydrothermal/solvothermal process produces LPDs that have excitation independent emission with well-defined electronic transitions. This two-step protocol provides a straightforward approach to remove unwanted small molecular fluorescence, which has plagued carbon dot systems, without the need for advanced chromatographic purification methods or steps. A series of spectroscopic, electrochemical, and theoretical experiments suggest that this process proceeds via a sequential dehydration and dehydrogenation pathway to cross-link the lawsone into a carbon dot structure. This polymerization process helps to stabilize and favor certain electronic transitions inherently present in the lawsone monomer. The generation of the LPDs results in a 2 order of magnitude increase in the emission intensity and a quantum yield of 37%. This behavior is likely the result of the cross-linked structure shielding these electronic states from deactivation caused by nonradiative processes such as vibrational coupling and excited state quenching from thermal deactivation and solvent collisions. This finding is consistent with a cross-linked enhanced emission (CEE) mechanism, as previously observed for other similar systems. The LPDs were then incorporated into a TiO2 photoanode and utilized as a photosensitizer in a dye-sensitized solar cell (DSSC) which showed an enhancement in photocurrent density over pure TiO2. We also prepared a derivative of the LPDs utilizing a diethylene triamine additive (nitrogen-doped lawsone polymer dots (N-LPDs)) using the same two-step protocol and demonstrated its potential as a fluorescence microscopy dye for imaging MDA-MB-231 cancer cells.

36 MATERIALS SCIENCE↗

Enhanced Hydrothermal Stability and Catalytic Activity of LaxZryOz Mixed Oxides for the Ketonization of Acetic Acid in the Aqueous Condensed Phase

Common ketonization catalysts such as ZrO2, CeO2, and TiO2-based catalysts have been reported to lose surface area, undergo phase transformation, and lose catalytic activity when utilized in the condensed aqueous phase. In this work, we synthesized a series of LaxZryOz mixed-metal oxides with different La:Zr atomic ratios with the goal of enhancing the catalytic activity and stability for the ketonization of acetic acid in condensed aqueous media at 568 K. We synthesized a hydrothermally stable LaxZryOz mixed-metal oxide catalyst with ketonization activity360 and 40 times more active than La2O3 and ZrO2, respectively. Catalyst characterization techniques suggest that the enhanced stability of the LaxZryOz catalysts is observed with the formation of a phase isomorphic with tetragonal ZrO2. DRIFT spectroscopy measurements indicated the enhanced catalytic activity of LaxZryOz catalysts correlated with greater acetic acid surface population in the presence of H2O versus pure ZrO2.

ketonization, deoxygenation, carboxylic acid, acet↗

Water Oxidation by Cobalt Centers on Various Oxide Surfaces: The Effects of Oxide Surface Acidity and Oxygen Atom Affinity on Catalysis

© 2015 American Chemical Society. Single-atom cobalt centers on various oxide surfaces (TiO2, MgO, SBA-15, AlPO, and Y-Zeolite) were prepared and evaluated as water oxidation catalysts by photochemical water oxidation experiments. Superior catalytic rates were observed for cobalt sites on basic supporting oxides (TiO2 and MgO) relative to those on acidic oxides (Y-Zeolite, AlPO, and SiO2). Per-atom turnover frequencies of ca. 0.04 s-1 were achieved, giving initial rates 100 times greater than that of a surface atom of a Co3O4 nanoparticle. Contrary to expectations based on theoretical work, no apparent correlation was observed between the catalytic rates and the oxygen atom affinities of the supporting oxides. (Graph Presented).

Ahn, Hyun S↗

Dye Stabilization and Enhanced Photoelectrode Wettability in Water-Based Dye-Sensitized Solar Cells through Post-assembly Atomic Layer Deposition of TiO 2

Detachment (desorption) of molecular dyes from photoelectrodes is one of the major limitations for the long-term operation of dye-sensitized solar cells. Here we demonstrate a method to greatly inhibit this loss by growing a transparent metal oxide (TiO2) on the dye-coated photoelectrode via atomic layer deposition (ALD). TiO2-enshrouded sensitizers largely resist detachment, even in pH 10.7 ethanol, a standard solution for intentional removal of molecular dyes from photoelectrodes. Additionally, the ALD post-treatment renders the otherwise hydrophobic dye-coated surface hydrophilic, thereby enhancing photoelectrode pore-filling with aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Plasmon-Driven Water Reduction: Gold Nanoparticle Size Matters

Water reduction under two visible light ranges (λ > 400 and λ > 435 nm) was investigated using gold-loaded titanium dioxide (Au-TiO2) with different sizes of Au nanoparticles (NPs). Two different mechanisms have been determined to clarify the specific role of Au NPs in visible light-induced photocatalytic reactions. Our study provides solid evidences showing that Au NPs sizes are essential for the surface plasmon-driven water reduction under λ > 435 nm. More specifically, we have demonstrated that the Au NPs sizes are vital for the SPR mediated electron transfer efficiency and play a critical role in determining the reduction potential of the transferred electrons in the TiO2 conduction band (CB) and their following activities. Our discovery provides a facile way to manipulate the reduction potential of transferred electrons by simply varying the Au NPs sizes, which will greatly facilitate the design of suitable plasmonic photocatalysts for water reduction and other valuable solar-to-fuel reactions.

Environmental Molecular Sciences Laboratory↗

CO Oxidation on Au/TiO 2 : Condition-Dependent Active Sites and Mechanistic Pathways

We present results of ab initio electronic structure and molecular dynamics simulations (AIMD), as well as microkinetic modeling of CO oxidation catalyzed by TiO2 supported Au nanocatalysts. A coverage-dependent microkinetic analysis, based on energetics obtained with density functional methods, shows that the dominant kinetic pathway, activated oxygen species, and catalytic active sites are all strongly depended on both temperature and oxygen partial pressure. A dynamic single atom catalytic (DSAC) mechanism for CO oxidation is proposed to be the dominant (but not the exclusive) pathway for this reaction under oxidative conditions below T < 400 K. This mechanism proceeds via an Au+-CO species that transfers from the Au-cluster to a surface oxygen ad-atom, where it reacts with the TiO2 support with a Mars van Krevelen mechanism to form CO2 and subsequently reintegrates back into the gold cluster to complete the catalytic cycle. At 300 = T = 600 K oxygen-bound single Au+CO sites and the perimeter sites of the Au-nanoparticle work in tandem to optimally catalyze the reaction. Above 600 K a variety of alternate pathways associated with the perimeter sites of the Au nanoparticle and/or the single atom site are found to be the most active pathways. Overall our results highlight the importance of the dynamic behavior of interfacial area between the catalysts and the support, which allows for a high degree of adaptation. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for Department of Energy by Battelle. Computational resources were provided at W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at PNNL and the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory.

Wang, Yang-Gang↗

C-C and C-Heteroatom Bond Dissociation Energies in CH 3 R'C(OH) 2 : Energetics for Photocatalytic Processes of Organic Diolates on TiO 2 Surfaces

The bond energies of a range of gem-diols, CH3R'C(OH)2 (R' = H, F, Cl, Br, CN, NO2, CF3, CH3CH2, CH3CH2CH2, CH3CH2CH2CH2, ((CH3)2)CH, (CH3)3C, ((CH3)2CH)CH2, (CH3CH2)(CH3)CH, C6H5 (CH3CH2)(CH3)CH) which serve as models for binding to a surface have been studied with density functional theory (DFT) and the molecular orbital G3(MP2) methods to provide thermodynamic data for the analysis of the photochemistry of ketones on TiO2. The ultraviolet (UV) photon-induced photodecomposition of adsorbed acetone and 3,3-dimethylbutanone on the rutile TiO2 (110) surface have been investigated with photon stimulated desorption (PSD) and temperature programmed desorption (TPD). The C-CH3 and C-C(R') bond dissociation energies in CH3R'C(OH)2 were predicted, and our calculated bond dissociation energies are in excellent agreement with the available experimental values. We used a series of isodemic reactions to provide small corrections to the various bond dissociation energies. The calculated bond dissociation energies are in agreement with the observed photodissociation processes except for R' = CF3, suggesting that these processes are under thermodynamic control. For R' = CF3, reaction dynamics also play a role in determining the photodissociation mechanism. The gas phase Brönsted acidities of the gem-diols were calculated. For three molecules, R' = Cl, Br, and NO2, loss of a proton leads to the formation of a complex of acetic acid with the anion Cl-, Br-, and NO2-. The acidities of these three species are very high with the former two having acidities comparable to CF3SO3H. The ketones (R'RC(=O)) are weak Lewis acids except where addition of OH- leads to the dissociation of the complex to form an anion bonded to acetic acid, R' = NO2, Cl, and Br. The X-C bond dissociation energies for a number of X-CO2- species were calculated and these should be useful in correlating with photochemical reactivity studies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formaldehyde Polymerization on (WO3)3/TiO2(110) Model Catalyst

Polymerization of formaldehyde, H2CO, was studied under ultrahigh vacuum conditions on a model catalyst consisting of monodispersed (WO3)3 clusters anchored on TiO2(110. Formaldehyde oligomers, (H2CO)n, desorbing from the polymer that formed on the catalyst surface are detected between 250 and 325 K in temperature programmed desorption experiments. At least two monolayers (ML) of H2CO are required on the surface to observe (H2CO)n desorption and the amount saturates for H2CO coverages in excess of ~30 ML. The presence of H2CO multilayers is required for the polymerization to take place indicating that it had to occur below 100 K. The saturation amount increases with increasing coverage of (WO3)3 clusters with the highest amount of ~13 ML observed on 1.2 (WO3)3/nm2 . No (H2CO)n desorption was observed on the bare TiO2(110) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of Nanoscale Phase Stability Reversals in Titanium Oxide Polymorphs

We have monitored the hydrothermal crystallization of titania nanoparticles by in situ X-ray diffraction (XRD). Using the refined average structures from the XRD measurements, we calculated potential energy variations with particle size on periodic bulk structures using density functional theory (DFT). These variations cannot account for the enthalpy required to stabilize anatase relative to rutile. Thus, the hypothesis that the strain of the surface structure of nanoparticles accounts for the stabilization of anatase is not applicable to the growth of titania in water. DFT calculations on model nanoparticles do generate lower surface energies for anatase than for rutile that are large enough to explain the stability reversal in nanoparticles relative to the bulk phase. Rather than arising from two-dimensional surface structure alone, as previously thought, the total surface energies are critically dependent upon defects associated with edges and corners of nanocrystals at particle sizes ?3 nm (i.e., during the nucleation process). As the particles grow, the bulk free energy becomes relatively more important, causing rutile to become stable at larger particle sizes. This study quantifies for the first time the critical role of edge and vertex energies in determining the relative phase stabilities of TiO2 nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of Au/TiO2 nanosystems by SiO2 monolayers: Toward the control of the catalyst activity and stability

The activity and stability of Au/TiO2 catalysts depend on several different factors such as the anchoring strength of Au particles at the TiO2 surface, the particle sintering, and the surface mobility of individual gold atoms and/or gold particles. Au/TiO2 catalysts can be made resistant to sintering by ALD deposition of a layer of SiO2 onto the catalysts. In this study, first-principles density-functional calculations are used to investigate how stability of Au nanoparticles is modified when a partial monolayer of SiO2 is deposited on a Au/TiO2 catalyst. We find that SiO2 structures deposited on a pure TiO2 substrate exhibits lattice-mismatch instabilities which result in a formation of additional strong anchoring sites for Au atoms/nanoparticles. An atomic-scale roughness introduced by a partial monolayer of SiO2 may slow down the atomic surface diffusion and inhibit Au nanoparti-cles growth/sintering, in agreement with previous experimental results.

36 MATERIALS SCIENCE↗

Self-Assembly of Metal-Oxide Nanoparticles into Hierarchically Patterned Porous Architectures using Ionic Liquid/Oil Emulsions

Hierarchically patterned macroporous TiO2 structures can be fabricated via the spontaneous self-assembly of TiO2 nanoparticles prepared using a mixture of 1-octadecene (ODE) and an ODE-immiscible 1-alkyl-3-methylimidazolium-based ionic liquid as the reaction medium. A study of the influence of side chain lengths of ionic liquids (n = 4, 8, or 16) reveals that this parameter can be further used to fine-tune the morphologies of the products. This synthetic methodology can also be extended to the formation of patterned macroporous ZrO2 and Fe3O4 structures. Finally, the potential reasons for the formation of hierarchical structures are discussed and the implications to further research are proposed.

Zhou, Shenghu↗

Tuning piezoelectric properties through epitaxy of La 2 Ti 2 O 7 and related thin films

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200ºC due to the low Curie temperature of the piezoelectric material. The strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La 2 Ti 2 O 7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO 3 (001), SrTiO 3 (110), and rutile TiO 2 (110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO 2 (110) results in epitaxial La 2/3 TiO 3 , an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La 2/3 TiO 3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO 2 (110) is a promising route to realize La 2/3 TiO 3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

36 MATERIALS SCIENCE↗