Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode coating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Practical stability limits of magnesium electrolytes

The development of a Mg ion based energy storage system could provide several benefits relative to today's Li-ion batteries, such as improved energy density. The electrolytes for Mg batteries, which are typically designed to efficiently plate and strip Mg, have not yet been proven to work with high voltage cathode materials that are needed to achieve high energy density. One possibility is that these electrolytes are inherently unstable on porous electrodes. To determine if this is indeed the case, the electrochemical properties of a variety of electrolytes were tested using a porous carbon coating on graphite foil and stainless steel electrodes. It was determined that the oxidative stability limit on these porous electrodes is considerably reduced as compared to those found using polished platinum electrodes. Furthermore, the voltage stability was found to be about 3 V vs. Mg metal for the best performing electrolytes. In conclusion, these results imply the need for further research to improve the stability of Mg electrolytes to enable high voltage Mg batteries.

25 ENERGY STORAGE↗

Statically and Dynamically Stable Lithium-sulfur Batteries

The commercialization of lithium-sulfur (Li-S) batteries is hampered by several intrinsic materials challenges: low electronic and ionic conductivity of the active material, severe polysulfide migration from the cathode to the anode, and instability of the Li-metal anode. The poor conductivity limits the electrochemical utilization of the active material and often necessitates a high content of electrochemically inactive, conductive carbon or functional polymers in the cathode region, which lowers the practical energy density. The polysulfide migration causes static and dynamic instabilities with high capacity fade, poisoning of the Li-metal surface, and poor cycling efficiency, hindering the practical viability of Li-S batteries. Recently, it is becoming obvious that the development of practically viable high-energy-density Li-S batteries is determined largely by attaining the necessary cell-design parameters. The essential extrinsic parameters include a sulfur loading of at least 5 mg cm-2, a sulfur content of over 65 wt.%, and a low electrolyte/sulfur (E/S) ratio of less than 11 milliliter per gram. To overcome the above challenges, our group has demonstrated in this project that innovations in polysulfide-filter-coated separators and advanced electrode substrates greatly enhance the electrochemical utilization and efficiency with reasonably high sulfur loadings and low E/S ratios in the cells. This is because Li-S batteries involve conversion reactions unlike the insertion-reaction electrodes in commercial Li-ion batteries, so cell components/designs directly borrowed from Li-ion batteries may need new architectures or chemical/physical characteristics to be adapted to sulfur cathodes. Our cell-component design provides the fabricated Li-S cells with enhanced electrochemical performance: high utilization of the active material, extended cycle life, and good storage properties. More importantly, these custom cell configurations allow the cells to employ the easily prepared sulfur cathodes with a high sulfur loading (up to 60 mg cm-2) and a high sulfur content (80 wt.%) with a low E/S ratio of as low as 4.0 milliliter per gram. Our progress illustrates that the approaches presented and developed in this project offer practically viable solutions for the Li-S technology development.

25 ENERGY STORAGE↗

Enhanced rate performance of Li3V2(PO4)3/C cathode by an improved rheological phase assisted microwave method

Highlights: • Rheological phase assisted microwave can utilize both advantages of two methods. • Polyethylene glycol was used as both rheological medium and carbon precursor. • 101.8 mA h g{sup −1} of specific capacity was obtained at 50 C rates. - Abstract: In this study, high-rate Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite is successfully synthesized via an improved rheological phase assisted microwave method using polyethylene glycol as both rheological medium and carbon precursor. The relatively uniform Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} particles are encapsulated in amorphous carbon architecture to form core-shell structure, providing effective electron and ion transport. When used as a cathode material in lithium ion battery, the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite displays a maximum discharge capacity of 101.8 mA h g{sup −1} at 50 C charge/discharge rate and still possesses 98.3% of capacity retention after 100 cycles, demonstrating superior rate capability and excellent cycling stability when compared with bare Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The observed electrochemical performance could be attributed to uniform coated-carbon pyrolysis from polyethylene glycol rheological phase precursor and small Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} pristine particles synthesized by the fast microwave heating route.

36 MATERIALS SCIENCE↗

Metal Alloy ICF Capsules Created by Electrodeposition

Electrochemical deposition is an attractive alternative to physical vapor deposition and micromachining to produce metal capsules for inertial confinement fusion (ICF). Electrochemical deposition (also referred to as electrodeposition or plating) is expected to produce full-density metal capsules without seams or inclusions of unwanted atomic constituents, the current shortcomings of micromachine and physical vapor deposition, respectively. In this paper, we discuss new cathode designs that allow for the rapid electrodeposition of gold and copper alloys on spherical mandrels by making transient contact with the constantly moving spheres. Electrodeposition of pure gold, copper, platinum, and alloys of gold-copper and gold-silver are demonstrated, with nonporous coatings of >40 µm achieved in only a few hours of plating. The surface roughness of the spheres after electrodeposition is comparable to the starting mandrel, and the coatings appear to be fully dense with no inclusions. A detailed understanding of the electrodeposition conditions that result in different alloy compositions and plating rates will allow for the electrodeposition of graded alloys on spheres in the near future. Finally, this report on the electrodeposition of metals on spherical mandrels is an important first step toward the fabrication of graded-density metal capsules for ICF experiments at the National Ignition Facility.

36 MATERIALS SCIENCE↗

Production and installation of wavelength-shifting reflective light enhancers for the Short-Baseline Near Detector

We report on the design, production, and installation of a wavelength-shifting reflective system on the cathode of the Short-Baseline Near Detector (SBND), a liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam. To increase and homogenize scintillation-light collection, 64 double-sided plates were fabricated from FR4, laminated with specular reflector film and coated with 300 $μ$g/cm$^2$ of tetraphenyl butadiene (TPB) wavelength shifter using controlled physical vapor deposition. The coating uniformity was validated through dedicated measurements of deposited mass and profilometry studies. Because exposure to ambient blue/UV light could degrade the TPB, protective filtering and controlled storage conditions were implemented during handling and installation. The coated plates were assembled between conductive meshes for high-voltage compatibility and installed in situ during detector integration. This system constitutes the largest TPB-coated area deployed in a neutrino detector. It operates in conjunction with SBND's photon detection system, which consists of photomultiplier tubes and X-ARAPUCAs. Early light-collection measurements show high uniformity and light response across the detector, supporting improved triggering, calorimetry, and position reconstruction in SBND.

Acciarri, R. [Fermilab]↗

Investigating the impact of preparation routes on the properties of copper-decorated silicon particles as anode materials for lithium-ion batteries

In recent years, the calendar life of Si has been recognized as a significant issue that must be addressed prior to technology deployment: The carbon conductive additive is a potential source of parasitic side reactions. However, carbon remains essential due to the low electronic conductivity of Si. In this study, we investigate the use of Cu as a conductive additive and potential alternative to carbon. Some Cu-decorated silicon particles (Si Cu ) were prepared using physical vapor deposition (PVD) via sputtering and high-energy milling. Other Si Cu particles were prepared by using a solution method and examined briefly. The milling method caused Cu to appear as island-like features on the Si surface, whereas the PVD method initially produced similar island-like features that gradually developed into a continuous coating around the Si as sputtering time increased. Electrodes fabricated from Si Cu exhibited lower overall resistivity, demonstrating the beneficial effect of Cu in improving electronic percolation through the electrode. Electrochemical tests showed that the milled SiCu exhibited higher capacity retention, improved rate capability, and lower overpotential. Furthermore, Si Cu coupled with an NMC811 cathode exhibited lower leakage currents compared with the baseline silicon, indicating that incorporating Cu provided an additional advantage of minimizing parasitic currents in the cells.

25 ENERGY STORAGE↗

Anode-supported tubular SOFCs based on BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ electrolyte fabricated by dip coating

Anode-supported tubular solid oxide fuel cells (SOFCs) based on a proton and oxide ion mixed conductor, BaZr0.1Ce0.7Y0.1Yb0.1O3 - δ (BZCYYb), have been fabricated using a dip coating and co-firing process. This new fabrication technique effectively reduced the Ohmic resistances of tubular cells to ~ 0.1 and ~ 0.3 Ω cm2 at 750 and 600 °C, respectively. Typical tubular cells with Ni-BZCYYb anode, BZCYYb electrolyte, and La0.6Sr0.4Co0.2Fe0.8O3 - δ (LSCF)-BZCYYb composite cathode demonstrated much-improved performance, achieving peak power densities of 1.13, 0.81, 0.63, and 0.53 W cm- 2 at 750, 700, 650, and 600 °C, respectively, when humidified (3 v% water vapor) hydrogen was used as fuel and ambient air as oxidant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of CO 2 -Regenerative Film Properties in Enhancing C 2+ Products Selectivity While Mitigating CO 2 Crossover

Zero-gap anion-exchange membrane electrode assembly (AEMEA) electrolyzers operating in alkaline media face challenges such as CO 2 crossover and salting-out. The bipolar membrane electrode assembly (BPMEA) electrolyzer, using DI water as the electrolyte, addresses both CO 2 crossover and salting-out issues. As cations, which are crucial in stabilizing the CO 2 R intermediates, are absent in the electrolyte, cations embedded in the AEM play an important role in dictating the CO 2 R selectivity and activity in BPMEA systems. So far, no systematic study has been conducted on the influence of cations embedded in AEMs on CO 2 selectivity and activity in BPMEA systems. Moreover, BPMEA systems impose an additional challenge: low stability due to delamination of the bipolar membrane caused by CO 2 regeneration at the membrane-membrane interface. To enhance the stability of the electrolyzer, a simple yet highly reproducible strategy for coating a porous CO 2 regenerative film on smooth Nafion 117 is demonstrated in this work, along with a systematic study of four different commercially available AEMs, composed of different cations and cation densities, for use in combination with Nafion 117 and copper catalyst at the cathode. We found that the PiperION membrane delivers selectivity and activity comparable to those of alkali-metal cations, owing to the enhanced local electric field resulting from the combined effects of a high positive charge on the N atom of the piperidinium cation and the high ion-exchange capacity. Further, we studied the influence of the thickness of the PiperION porous layer over Nafion 117 on CO 2 R selectivity and found that 70 μm is the minimum thickness to achieve maximum C 2+ products selectivity, reduced the CO 2 crossover to 5% from 25% at 4 SCCM and 150 mA cm –2 , and was stable for operation beyond 100 h. The selectivity of this system, compared with AEMEA, and stability outperformed both AEMEA and BPMEA. This study helps design more effective BPMs to inhibit CO 2 crossover while enabling stable and selective electrochemical CO 2 reduction to C 2+ hydrocarbons.

Cations↗

The Impact of Anomalous Resistivity in Vacuum Contaminant Plasmas on the Electrothermal Instability

This manuscript presents an assessment of the electrothermal instability (ETI) in the presence of anomalous resistivity (AR) in vacuum contaminant plasmas (VCP) when applied to a magnetized liner inertial fusion (MagLIF)-like load.Pulsed-power driven dielectrically coated metallic liners, like in MagLIF, experience the current-driven electrothermal instability which occurs when a material’s resistivity changes with temperature and is subject to ohmic heating. Large scale pulsed-power facilities that use magnetically insulated transmission lines (MITL) have been shown to generate low-density plasma which enters the target chamber and coalesces around the load. The low-density high-temperature vacuum contaminant plasmas (VCP) can parasitically divert current from the load through causing a short in the anode-cathode gap inside the target chamber. Resistive magnetohydrodynamic (MHD) simulations of these VCP experience unphysical runaway ohmic heating due to under predicting the resistivity by using a purely collisional resistivity model.AR provides a physics-based way to address this runaway heating through increasing the resistivity in a proportional way with the drift speed. In this work, 1D simulations probe the effect that AR in VCP has on the magnetic diffusion rate, and 2D simulations show how this effect manifests in the nonlinear striation form of the ETI for a MagLIF-like load. Beryllium and aluminum dielectrically coated liners are used for the 1D and 2D simulations in this work. The1D simulations show that a VCP causes a delay in the current delivery to the load by upwards of 8 ns at 60 ns into atypical current pulse for an 1 × 10 7 A scale pulsed-power accelerator. The 2D simulations show the delay observed in the 1D simulations is reduced substantially (4 ns) by 2D turbulence that disrupts the VCP layer early in time. Here, the 2Dsimulated ETI growth varies across AR models, more so for the beryllium liner than the aluminum liner because the beryllium liner shows an enhanced rate of penetration for the magnetic diffusion wave in comparison to the aluminum liner. The 2D simulations show the bulk dielectric thickness varies across AR models with the Davidson AR model beingthe largest and the Buneman AR model being the smallest, and in connection with the thickness the Rayleigh-Taylor bubble-spike distances varies correspondingly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shelf-life of ball-milled catalyst inks for the fabrication of fuel cell electrodes

A major factor driving fuel cell costs is the quantity of precious metal required. Therefore, it is important to understand a timeframe where inks can be reused. Here, in this work, we explore differences between a freshly prepared catalyst ink and one that has been stored for over a year – comparing ink properties, cathode catalyst layer microstructure, and their respective fuel cell performance. Ink studies revealed smaller agglomerate sizes and a decrease in shear viscosity for the aged ink. Longer storage time also results in fewer cracks and a more uniform ionomer distribution, as evidenced by microscopy characterization of rod-coated electrodes. Lastly, polarization curves show improved performance at higher current densities for the electrode prepared from the aged ink. We rationalize such effect in terms of enhanced ionomer adsorption onto the catalyst over time.

08 HYDROGEN↗

Synthesis, structural and electrochemical properties of electron beam evaporated V{sub 2}O{sub 5} thin films

Vanadium pentoxide is one of the most promising cathode materials because it offers high energy density, low cost, low toxicity over the other cathode materials. Its layered and open structure makes this material in thin film form well suited for electro-chemical insertion reactions with the Li ions. In the present investigation, V{sub 2}O{sub 5} thin films have been prepared by electron beam evaporation technique on gold coated silicon substrates maintained at a substrate temperature of 250 Degree-Sign C in an oxygen partial pressure of 2 Multiplication-Sign 10{sup -4} mbar. The XRD patterns exhibited three predominant diffraction peaks corresponding to (200) (001) and (400) planes of orthorhombic phase of V{sub 2}O{sub 5} with P{sub mnm} space group. The electrochemical characteristics of V{sub 2}O{sub 5} thin films with thickness of 600 nm were examined in non-aqueous region. The film exhibited step wise discharge with two plateaus. The as-deposited film delivered a discharge capacity of 70 {mu}Ah/(cm{sup 2}-{mu}m) at a current density of 30 {mu}A/cm{sup 2}. Annealing of these films at 450 Degree-Sign C exhibited a better discharge capacity of 90 {mu}Ah/(cm{sup 2}-{mu}m).

36 MATERIALS SCIENCE↗

Mesoscale Effective Property Simulations Incorporating Conductive Binder

Lithium-ion battery electrodes are composed of active material particles, binder, and conductive additives that form an electrolyte-filled porous particle composite. The mesoscale (particle-scale) interplay of electrochemistry, mechanical deformation, and transport through this tortuous multi-component network dictates the performance of a battery at the cell-level. Effective electrode properties connect mesoscale phenomena with computationally feasible battery-scale simulations. We utilize published tomography data to reconstruct a large subsection (1000+ particles) of an NMC333 cathode into a computational mesh and extract electrode-scale effective properties from finite element continuum-scale simulations. We present a novel method to preferentially place a composite binder phase throughout the mesostructure, a necessary approach due difficulty distinguishing between non-active phases in tomographic data. We compare stress generation and effective thermal, electrical, and ionic conductivities across several binder placement approaches. Isotropic lithiation-dependent mechanical swelling of the NMC particles and the consideration of strain-dependent composite binder conductivity significantly impact the resulting effective property trends and stresses generated. Lastly, our results suggest that composite binder location significantly affects mesoscale behavior, indicating that a binder coating on active particles is not sufficient and that more accurate approaches should be used when calculating effective properties that will inform battery-scale models in this inherently multi-scale battery simulation challenge.

25 ENERGY STORAGE↗

Ion-Sieving Carbon Nanoshells for Deeply Rechargeable Zn-Based Aqueous Batteries

As an alternative to lithium-ion batteries, Zn-based aqueous batteries feature nonflammable electrolytes, high theoretical energy density, and abundant materials. However, a deeply rechargeable Zn anode in lean electrolyte configuration is still lacking. Different from the solid-to-solid reaction mechanism in lithium-ion batteries, Zn anodes in alkaline electrolytes go through a solid-solute-solid mechanism (Zn-Zn(OH) 4 2- -ZnO), which introduces two problems. First, discharge product ZnO on the surface prevents further reaction of Zn underneath, which leads to low utilization of active material and poor rechargeability. Second, soluble intermediates change Zn anode morphology over cycling. In this work, an ion-sieving carbon nanoshell coated ZnO nanoparticle anode is reported, synthesized in a scalable way with controllable shell thickness, to solve the problems of passivation and dissolution simultaneously. The nanosized ZnO prevents passivation, while microporous carbon shell slows down Zn species dissolution. Under extremely harsh testing conditions (closed cell, lean electrolyte, no ZnO saturation), this Zn anode shows significantly improved performance compared to Zn foil and bare ZnO nanoparticles. The deeply rechargeable Zn anode reported is an important step toward practical high-energy rechargeable aqueous batteries (e.g., Zn-air batteries). And the ion-sieving nanoshell concept demonstrated is potentially beneficial to other electrodes such as sulfur cathode for Li-S batteries.

catalysis (heterogeneous), defects, membrane, carb↗

Long-term evaluation of solid oxide fuel cell candidate materials in a 3-cell generic short stack fixture, Part II: sealing glass stability, microstructure and interfacial reactions.

A generic solid oxide fuel cell stack test fixture was developed to evaluate candidate materials and processing methods under realistic conditions. Part I of the work addressed the stack fixture, seal system and cell performance of a 3-cell short stack tested at 800oC for 6000h. Commercial NiO-YSZ anode-supported thin YSZ electrolyte cells with LSM cathodes were used for assessment and were tested in constant current mode with dilute (~50% H2) fuel versus air. Part II of the work examined the sealing glass stability, microstructure development, interfacial reactions, and volatility issues. Part III of the work investigated the stability of Ce-(Mn,Co) spinel coating, AISI441 metallic interconnect, alumina coating, and cell degradation. After 6000h of testing, the refractory sealing glass YSO77 (Ba-Sr-Y-B-Si) showed desirable chemical compatibility with YSZ electrolyte in that no discernable interfacial reaction was identified, consistent with thermodynamic calculations. In addition, no glass penetration into the thin electrolyte was observed. At the aluminized AISI441 interface, the protective alumina coating appeared to be corroded by the sealing glass. Air side interactions appeared to be more severe than fuel side interactions. Metal species such as Cr, Mn, and Fe were detected in the glass, but were limited to the vicinity of the interface. No alkaline earth chromates were found at the air side. Volatility was also studied in a similar glass and weight loss in a wet reducing environment was determined. Using the steady-state volatility data, the life time (40,000h) weight loss of refractory sealing glass YSO77 was estimated to be less than 0.1 wt%.

sealing glass, AISI441, aluminization, (Mn,Co)-spi↗

Oxalate based non-aqueous sol-gel synthesis of phase pure sub-micron LiFePO{sub 4}

We report on the synthesis and preliminary characterisation by X-ray diffraction (XRD), scanning electron microscopy (SEM), Moessbauer spectroscopy and infrared spectroscopy (IR) of C-LiFePO{sub 4}. Homogeneous sub-micron sized particles of surface carbon coated phase pure LiFePO{sub 4} are synthesised by a novel non-aqueous oxalate based sol-gel procedure. Our synthetic route successfully overcomes the incidence of Fe{sup 3+}, effectively controls undesirable particle growth and has the potential for upscaling and application as Li-ion battery cathodes.

36 MATERIALS SCIENCE↗

Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium

Lightweight and flexible energy storage devices are urgently needed to persistently power wearable devices, and lithium-sulfur batteries are promising technologies due to their low mass densities and high theoretical capacities. Here we report a flexible and high-energy lithium-sulfur full battery device with only 100% oversized lithium, enabled by rationally designed copper-coated and nickel-coated carbon fabrics as excellent hosts for lithium and sulfur, respectively. These metallic carbon fabrics endow mechanical flexibility, reduce local current density of the electrodes, and, more importantly, significantly stabilize the electrode materials to reach remarkable Coulombic efficiency of >99.89% for a lithium anode and >99.82% for a sulfur cathode over 400 half-cell charge-discharge cycles. Furthermore, the assembled lithium-sulfur full battery provides high areal capacity (3 mA h cm –2 ), high cell energy density (288 W h kg –1 and 360 W h L –1 ), excellent cycling stability (260 cycles), and remarkable bending stability at a small radius of curvature (<1 mm).

25 ENERGY STORAGE↗

Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells

The loss of sulfur cathode material as a result of polysulfide dissolution causes significant capacity fading in rechargeable lithium/sulfur cells. Embodiments of the invention use a chemical approach to immobilize sulfur and lithium polysulfides via the reactive functional groups on graphene oxide. This approach obtains a uniform and thin (.about.tens of nanometers) sulfur coating on graphene oxide sheets by a chemical reaction-deposition strategy and a subsequent low temperature thermal treatment process. Strong interaction between graphene oxide and sulfur or polysulfides demonstrate lithium/sulfur cells with a high reversible capacity of 950-1400 mAh g.sup.-1, and stable cycling for more than 50 deep cycles at 0.1 C.

25 ENERGY STORAGE↗